I tried to reboot and it is stopped at the LG screen as shown in the attach photo. I dont know what to do now, as I think it cant even connect and to the dock (still charging but not recognised at all by the PC). It would be great and very appreciated if anyone knows what I need to do? Otherwise it is an expensive paperweight now.
Thanks in advance.
P/S: This is my 1st post in XDA, so if anything wrong with my post please let me know, I will change. Thanks again.
Update
I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
Link to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this helps.
This may not help, but try pressing the side button in for 20-30 seconds. Shortly after it stops vibrating, it will start rebooting again and then you can stop pressing the button.
JimSmith94 said:
This may not help, but try pressing the side button in for 20-30 seconds. Shortly after it stops vibrating, it will start rebooting again and then you can stop pressing the button.
Click to expand...
Click to collapse
Hi, I think I messed up with the wrong kernel is the reason of this issue, and I have been able to get to the fastboot menu, do you know how revert it back to the factory/out of box condition? Thanks.
I haven't tried this, but it may work for you: http://forum.xda-developers.com/wat...recovery-stock-recovery-image-v1-1-1-t3124452
JimSmith94 said:
I haven't tried this, but it may work for you: http://forum.xda-developers.com/wat...recovery-stock-recovery-image-v1-1-1-t3124452
Click to expand...
Click to collapse
Thanks for ur help. I have manage to make it works again.
johnnyle7 said:
Thanks for ur help. I have manage to make it works again.
Click to expand...
Click to collapse
Please let us know how you did it, in case or when I or others need to do the same.
JimSmith94 said:
Please let us know how you did it, in case or when I or others need to do the same.
Click to expand...
Click to collapse
should I update my post with the solution?
johnnyle7 said:
should I update my post with the solution?
Click to expand...
Click to collapse
Either that or post a new reply. I know we would appreciate it.
johnnyle7 said:
I tried to reboot and it is stopped at the LG screen as shown in the attach photo. I dont know what to do now, as I think it cant even connect and to the dock (still charging but not recognised at all by the PC). It would be great and very appreciated if anyone knows what I need to do? Otherwise it is an expensive paperweight now.
Thanks in advance.
P/S: This is my 1st post in XDA, so if anything wrong with my post please let me know, I will change. Thanks again.
Update
I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this helps.
Click to expand...
Click to collapse
Hi There,
I have the same problem after the update.
I followed your steps but to enter into recovery mode I had to enable USB debugging mode which cannot be done as the watch keeps on rebooting.
Please let me know is there any other way to enable usb debugging mode to enter into recovery?
I get this error on my pc when I enter into recovery " error device '(null)' not found adb"
rayyansyed said:
Hi There,
I have the same problem after the update.
I followed your steps but to enter into recovery mode I had to enable USB debugging mode which cannot be done as the watch keeps on rebooting.
Please let me know is there any other way to enable usb debugging mode to enter into recovery?
I get this error on my pc when I enter into recovery " error device '(null)' not found adb"
Click to expand...
Click to collapse
Can anybody help me out in bringing my watch to life?
Great post. . . .
Driver Issue
I can get into the fastboot menu but my pc cannot recognize it. What is the appropriate method to connecting it. I have tried different cables, google driver, adb driver but the device doesnt even show up.
Related
Is there a possibility to enter stock recovery via USB cable and ADB in SW Upgrade Mode?
Can anyone check this as my phone is in repair centre?
1. Turn off the phone
2. Connect USB cable with Vol+ button (phone enters in SW Update mode)
3. Open command prompt and from ADB folder type "adb reboot recovery"
4. Is this working?
I'll be very grateful if someone would check this. Thanks in advance.
Please, it is very urgent. If it works I could today pick-up phone from my Operator before they send it to repair. They're sending it tommorow.
Much thanks and sorry for double posting...
EDIT:
@fjsw: thanks for checking.
No it doesn't work
output:
error: device not found
I'm in recovery...
I turned on my bricked OB, waiting for bootloop, plug USB and "adb reboot recovery"
Sorry for my bad english
edit: I inserted some files from Nova v8zip to CM7-SelfKANG4.zip and flashed this edited CM.zip... Bootloop, plug USB and "adb reboot recovery" .. but, I flashed again CM.zip, now no-edited, reboot system from recovery and i got Error sreen.. So I flash firmware with http://forum.xda-developers.com/showthread.php?t=1111771
AFAIK it doesn't work. I tried it too (when i bricked my OB {CM7-->stock} but it didn't work!
Wow it's been an "old-time" thread to reply, since the first post August 7, 2011. yet it still replied today.
AFAIK, "Android Debug Bridge" need operating system to run (to debug). It need USB Debugging that running with Android, so ADB can't run without Android OS running..
CMIIW.
redy2006 said:
Wow it's been an "old-time" thread to reply, since the first post August 7, 2011. yet it still replied today.
AFAIK, "Android Debug Bridge" need operating system to run (to debug). It need USB Debugging that running with Android, so ADB can't run without Android OS running..
CMIIW.
Click to expand...
Click to collapse
Exactly. I think AntoSVK isn't right. He should edit his post and accurately describe his case...
How to unlock Lg-Ku5900.
radkor said:
Exactly. I think AntoSVK isn't right. He should edit his post and accurately describe his case...
Click to expand...
Click to collapse
How to unlock Lg-Ku5900 .Screen, must enter your email and password.
kanokphone said:
How to unlock Lg-Ku5900 .Screen, must enter your email and password.
Click to expand...
Click to collapse
Do a search before you post...
http://forum.xda-developers.com/showthread.php?t=1448803
This also will remove phone lock if you forget unlock code or pattern.
Click to expand...
Click to collapse
Figured this would cut down on threads and questions. I have made a video showing how to manually update to 4.1.2 (WILL ALSO WORK FOR 4.2, just use the correct file that I link to) on your Nexus 7.
http://www.youtube.com/watch?v=PwlXQoAzrBE
Hope this helps.
Thank you =) will try
-Google
I hope people actually watch and learn from this tutorial instead of waiting around for some point and click tool powered by unicorn blood and hamsters. It's an excellent tutorial and gets you in touch with your device by using the exact tools Google provided you to use for this exact thing.. Use them, they are invaluable.
This means we can't use the old method of putting update.zip file in the root folder and let the system upgrades by itself.
Terrific video but for one problem: My N7 doesn't seem to want to go into Recovery.
Using adb reboot recovery gets me into the red triangle screen, but pressing Power+VolUp just gets the Google logo and pressing all three buttons just restarts it. Something is screwy and I've wasted about three hours on messing with it. I never get the screen shown at 3:41.
If I cold start it by pressing Power+VolUp+VolDn, it brings up a screen with an Android on its back with the body open and a big green Start pointing to the Power button and arrows next to the volume buttons. In the lower left in white computer type is:
FASTBOOT MODE
PRODUCT NAME - grouper
VARIANT - not defined yet
HW VERSION - ER3
BOOTLOADER VERSION - 3.34
BASEBAND VERSION - N/A
SERIAL NUMBER - xxxxxxxxxxx
SIGNING - not defined yet
LOCK STATE - LOCKED
Pressing up or down twice brings up Recovery and pressing Power switches to a Google logo and that's the end of the show.
I followed your "How to install the Android SDK, ADB and Fastboot on your PC" video without a hitch (thank you for that one, too) and I have USB debugging turned on (as proven by adb reboot recovery working), so what the heck is going wrong with getting it past the red triangle screen?
EDIT: I'm bone stock, no root.
DirkBelig said:
Terrific video but for one problem: My N7 doesn't seem to want to go into Recovery.
Using adb reboot recovery gets me into the red triangle screen, but pressing Power+VolUp just gets the Google logo and pressing all three buttons just restarts it. Something is screwy and I've wasted about three hours on messing with it. I never get the screen shown at 3:41.
If I cold start it by pressing Power+VolUp+VolDn, it brings up a screen with an Android on its back with the body open and a big green Start pointing to the Power button and arrows next to the volume buttons. In the lower left in white computer type is:
FASTBOOT MODE
PRODUCT NAME - grouper
VARIANT - not defined yet
HW VERSION - ER3
BOOTLOADER VERSION - 3.34
BASEBAND VERSION - N/A
SERIAL NUMBER - xxxxxxxxxxx
SIGNING - not defined yet
LOCK STATE - LOCKED
Pressing up or down twice brings up Recovery and pressing Power switches to a Google logo and that's the end of the show.
I followed your "How to install the Android SDK, ADB and Fastboot on your PC" video without a hitch (thank you for that one, too) and I have USB debugging turned on (as proven by adb reboot recovery working), so what the heck is going wrong with getting it past the red triangle screen?
Click to expand...
Click to collapse
I have the same exact same problem, except my bootloader is unlocked. Tried everything I could think of, and it still doesn't go into android recovery.
Insert your USB cable and make sure it's plugged into a charger or PC.. Recovery won't appear unless you are plugged in. It's an odd bug fixed when you update
I've been plugged in to both a charger and the PC. Come on, if I've fired off adb recovery reboot, doesn't that automatically suggest that I'm connected to the computer? I press Power+Volume Up and it does NOT instantly go to the screen it should, but brings up a Google logo and sits there forever.
styckx said:
Insert your USB cable and make sure it's plugged into a charger or PC.. Recovery won't appear unless you are plugged in. It's an odd bug fixed when you update
Click to expand...
Click to collapse
Doesn't work in either case, it just hangs until the hard reboot kicks in.
DirkBelig said:
Terrific video but for one problem: My N7 doesn't seem to want to go into Recovery.
Using adb reboot recovery gets me into the red triangle screen, but pressing Power+VolUp just gets the Google logo and pressing all three buttons just restarts it. Something is screwy and I've wasted about three hours on messing with it. I never get the screen shown at 3:41.
If I cold start it by pressing Power+VolUp+VolDn, it brings up a screen with an Android on its back with the body open and a big green Start pointing to the Power button and arrows next to the volume buttons. In the lower left in white computer type is:
FASTBOOT MODE
PRODUCT NAME - grouper
VARIANT - not defined yet
HW VERSION - ER3
BOOTLOADER VERSION - 3.34
BASEBAND VERSION - N/A
SERIAL NUMBER - xxxxxxxxxxx
SIGNING - not defined yet
LOCK STATE - LOCKED
Pressing up or down twice brings up Recovery and pressing Power switches to a Google logo and that's the end of the show.
I followed your "How to install the Android SDK, ADB and Fastboot on your PC" video without a hitch (thank you for that one, too) and I have USB debugging turned on (as proven by adb reboot recovery working), so what the heck is going wrong with getting it past the red triangle screen?
EDIT: I'm bone stock, no root.
Click to expand...
Click to collapse
Omega360 said:
I have the same exact same problem, except my bootloader is unlocked. Tried everything I could think of, and it still doesn't go into android recovery.
Click to expand...
Click to collapse
I had the exact same issues. Turns out, I had to hold my volume button directly in the middle while holding power.
ShannonMS81 said:
I had the exact same issues. Turns out, I had to hold my volume button directly in the middle while holding power.
Click to expand...
Click to collapse
THIS WORKED!!!!!!
OMFG!!! I burned the time I was going to watch the making of Prometheus Blu-ray trying to get this stupid thing to work! Where were you hours ago, man?!?!? Thank you!!! Better late than never.
Glad you got it.. BTW.. I did-misread what you said and yes, you would have had a USB cable in. All these posts are running together of people asking for help and having issues. Mah poor brain is getting em all mixed together.
Nexus 7 needs a coffee maker attachment!
qbking77 said:
Figured this would cut down on threads and questions. I have made a video showing how to manually update to 4.1.2 on your Nexus 7.
http://www.youtube.com/watch?v=PwlXQoAzrBE
Hope this helps.
Click to expand...
Click to collapse
Great video! I might just be using this in the near future. I plan on waiting for the factory image (I just like having a full install on my devices when possible) instead of using just the zip file (that is if I dont get the update). Although if the update isnt showing up sometime soon then this is going to work for me just fine.
qbking77 said:
Figured this would cut down on threads and questions. I have made a video showing how to manually update to 4.1.2 on your Nexus 7.
http://www.youtube.com/watch?v=PwlXQoAzrBE
Hope this helps.
Click to expand...
Click to collapse
can't enterthe stock recovery since i instaled CWM. removing it would bring the stock back ?
for some reason its not working for me. im fully stock, no root, locked bootloader. my pc recognizes N7 adb host and goes into recovery, but when i write the command "adb sideload 03a4eaf95f73.signed-nakasi-JZO54K-from-JRO03D.03a4eaf9.zip" it doesnt send it and just shows me the help info for adb. any suggestions why?
Thanks in advance
Same issue, when I "adb device" it will sometimes show as "device" and other times as something else (don't recall but not device). I can get into recover via "adb reboot recovery" and then into "update via adb" but when I "adb sideload.....(see above)" it just runs through the different commands as if "sideload" is not an option? Followed the video to a "T" and nothing.....thinking about rooting and doing it the old fashion way but this is the first android device I've had that I've not seen a reason to root right away...maybe should just wait for the OTA?
Ram1500 said:
for some reason its not working for me. im fully stock, no root, locked bootloader. my pc recognizes N7 adb host and goes into recovery, but when i write the command "adb sideload 03a4eaf95f73.signed-nakasi-JZO54K-from-JRO03D.03a4eaf9.zip" it doesnt send it and just shows me the help info for adb. any suggestions why?
Thanks in advance
Click to expand...
Click to collapse
While in stock recovery and in the "apply update from adb" screen, type in the command window "adb devices". It should say:
<your device serial number> sideload
If it does not, check the drivers in device manager. You may need to manually install it. I had to on mine.
Cheers qbking77, worked a treat.
First time I pushed using adb & after following your tut life is good. Thanks again!
Ram1500 said:
for some reason its not working for me. im fully stock, no root, locked bootloader. my pc recognizes N7 adb host and goes into recovery, but when i write the command "adb sideload 03a4eaf95f73.signed-nakasi-JZO54K-from-JRO03D.03a4eaf9.zip" it doesnt send it and just shows me the help info for adb. any suggestions why?
Thanks in advance
Click to expand...
Click to collapse
You may be using an older version of adb that does not support the sideload command.
Jwoc12 said:
Same issue, when I "adb device" it will sometimes show as "device" and other times as something else (don't recall but not device). I can get into recover via "adb reboot recovery" and then into "update via adb" but when I "adb sideload.....(see above)" it just runs through the different commands as if "sideload" is not an option? Followed the video to a "T" and nothing.....thinking about rooting and doing it the old fashion way but this is the first android device I've had that I've not seen a reason to root right away...maybe should just wait for the OTA?
Click to expand...
Click to collapse
It should say 8sdgfs3JKSDBFkjk3 device or something like that. If it does not, you need to install the the correct driver.
My computer did not recognize my tablet at first. I went to this thread and installed PDAnet which installed the driver.
http://forum.xda-developers.com/showthread.php?t=1809195
[Q] My motorola razr i showing message "android is upgrading" then restarting again
I writting with my problem on your post, just getting hope that mine will work too.
Actually I have also ''NIL'' knowledge about all this software/ quote language etc
My issue is; my Moto Razr i is just stuck on '' Android is upgrading '' than shows ''Starting Apps'' thn nothing happen n same things repeats ... couple of hours back it was saying ''finishing boot'' also but now it is just giving this error '' Android is upgrading '' than shows ''Starting Apps'' thn nothing happen n same things repeats
Please I want to request if you are about to guide anything in tough language please consider that I am completely unknown to all the setups and stuff... just if you can help sharing step by step process and also post specific link/software to download (if needed) and how to download and other details in simple guidance plz plz plz.
One more point I tried to chat with Motorola chat service and they suggested me to power off it first but i m pressing vol- and vol + and power button but phone is quickly restarting on its own... i m even unable to go on boot as they suggested me to do so.
Thanks a lot to ''my upcoming angel'' in advance
Hope one can help me at earliest.
i recommend flashing stock rom again.
RSD Lite: http://forum.xda-developers.com/showthread.php?t=1974568
4.1.2 ROM: http://sbf.droid-developers.org/phone.php?device=13
to power down the phone look at this link: http://forum.xda-developers.com/show....php?t=2220242
P.S one thread is enough lets use this one...
5m00v3 said:
i recommend flashing stock rom again.
RSD Lite: http://forum.xda-developers.com/showthread.php?t=1974568
4.1.2 ROM: http://sbf.droid-developers.org/phone.php?device=13
to power down the phone look at this link: http://forum.xda-developers.com/show....php?t=2220242
P.S one thread is enough lets use this one...
Click to expand...
Click to collapse
Yep that's one way of solving it
But your last link doesn't work.
I suggest the following to reboot the phone to AP Fastboot mode (also called 'bootloader' in the android world):
Hold power, vol - and vol + for about 10sec. At the moment the phone reboots, release all buttons except the vol -. U will now boot in AP Fastboot mode. Release the vol - when in AP Fastboot mode.
But before doing this, make sure RSD-Lite is working and u have the right device drivers and right firmware at hand. See the above links.
So first the first link for the drivers and rsd-lite.
Then the second link for you latest firmware 4.1.2 (region)
Then my piece about rebooting
And last the First link again to flash your firmware.
Links not working
Hazou said:
Yep that's one way of solving it
But your last link doesn't work.
I suggest the following to reboot the phone to AP Fastboot mode (also called 'bootloader' in the android world):
Hold power, vol - and vol + for about 10sec. At the moment the phone reboots, release all buttons except the vol -. U will now boot in AP Fastboot mode. Release the vol - when in AP Fastboot mode.
But before doing this, make sure RSD-Lite is working and u have the right device drivers and right firmware at hand. See the above links.
So first the first link for the drivers and rsd-lite.
Then the second link for you latest firmware 4.1.2 (region)
Then my piece about rebooting
And last the First link again to flash your firmware.
Click to expand...
Click to collapse
Thanks a lot for your advice and also sorry for troubling by two posts for single issue, will take care onwards
You have guided in very simple manner but the problem is that I
1 - RSD-Lite is not opening as it says ''find the app to open msi file''
2 - The 4.1.2 region I found is .... Android 4.1.2 Blur_Version.91.2.29001.XT890.Retail.en.GB is it ok?
3 - This link is giving error ''404 Page Not Found The page you requested was not found. Use the search tool below to find content on our site.'' where you said to power down the phone look at this link: http://forum.xda-developers.com/show....php?t=2220242
4 - And last the First link again to flash your firmware. ... I am not sure which first link is it? if its about RSD Lite thn its not opening in my pc dear
I am using windows 8 on my Laptop .. anything else to download to support or open this RSD lite first?
Also my phone is not going on boot by trying your suggested method as well... it is just reopening on its own and going on its problematic ''app starting'' screen error n thn goes off n restart again unless it consumes all of its battery
Without phone its like someone has cut the wings
Please help brother !!!
Thankks
Sohail Ali said:
Thanks a lot for your advice and also sorry for troubling by two posts for single issue, will take care onwards
You have guided in very simple manner but the problem is that I
1 - RSD-Lite is not opening as it says ''find the app to open msi file''
2 - The 4.1.2 region I found is .... Android 4.1.2 Blur_Version.91.2.29001.XT890.Retail.en.GB is it ok?
3 - This link is giving error ''404 Page Not Found The page you requested was not found. Use the search tool below to find content on our site.'' where you said to power down the phone look at this link: http://forum.xda-developers.com/show....php?t=2220242
4 - And last the First link again to flash your firmware. ... I am not sure which first link is it? if its about RSD Lite thn its not opening in my pc dear
I am using windows 8 on my Laptop .. anything else to download to support or open this RSD lite first?
Also my phone is not going on boot by trying your suggested method as well... it is just reopening on its own and going on its problematic ''app starting'' screen error n thn goes off n restart again unless it consumes all of its battery
Without phone its like someone has cut the wings
Please help brother !!!
Thankks
Click to expand...
Click to collapse
Ok, new one.
First the phone should reboot in my way. There is no possibility it will boot to the screen with android "app starting" if it is executed right . Try few more times and get the hang of it. Hold all 3 buttons and at the moment the phone reboots (vibrate, screen goes black and green led will shine a bit after), only hold the vol -. Just release the power and vol+.
There is another way to get to Ap Fastboot mode. It requires you to have adb up and running. Search on the internet for adb (can be found in the razr i subforum) and again make sure your device drivers are installed correct.
If you think al is set and ready. Boot your phone normally to that screen with the message. Then open a command-prompt and type "adb devices". If it says, can't find adb. Open the command-prompt in the adb folder with holding shift and right mouse button. and click command-prompt. When adb devices gives u a device. Type in "adb reboot bootloader" to get into AP Fastboot mode.
If you have issues with executing msi files there is something wrong with your windows. Try and search on the internet to solve that.
Let us know how it goes
Hazou said:
Ok, new one.
First the phone should reboot in my way. There is no possibility it will boot to the screen with android "app starting" if it is executed right . Try few more times and get the hang of it. Hold all 3 buttons and at the moment the phone reboots (vibrate, screen goes black and green led will shine a bit after), only hold the vol -. Just release the power and vol+.
There is another way to get to Ap Fastboot mode. It requires you to have adb up and running. Search on the internet for adb (can be found in the razr i subforum) and again make sure your device drivers are installed correct.
If you think al is set and ready. Boot your phone normally to that screen with the message. Then open a command-prompt and type "adb devices". If it says, can't find adb. Open the command-prompt in the adb folder with holding shift and right mouse button. and click command-prompt. When adb devices gives u a device. Type in "adb reboot bootloader" to get into AP Fastboot mode.
If you have issues with executing msi files there is something wrong with your windows. Try and search on the internet to solve that.
Let us know how it goes
Click to expand...
Click to collapse
Soooo Happy and Grateful to you Mr Genius and Well on time ANGEL''
I realized two things while following all the guidance, First is; I admit that I was too ''NIL'' to understand and act on simple method of rebooting so after few times practices I was able to execute it right. Second that I am not that dumb as finally I was able to notice the issue of ''not opening MSI'' extension as only ''a dot'' was missing in the name of downloaded file, so I have added that ''dot'' in between of 4 and msi ... (4.msi) and rest your software has worked very quick and automatic & I found my phone's breath back...
So bundle of thanks for your quick and kind support brother.
Be Blessed
Take Care
Sohail Ali said:
Soooo Happy and Grateful to you Mr Genius and Well on time ANGEL''
I realized two things while following all the guidance, First is; I admit that I was too ''NIL'' to understand and act on simple method of rebooting so after few times practices I was able to execute it right. Second that I am not that dumb as finally I was able to notice the issue of ''not opening MSI'' extension as only ''a dot'' was missing in the name of downloaded file, so I have added that ''dot'' in between of 4 and msi ... (4.msi) and rest your software has worked very quick and automatic & I found my phone's breath back...
So bundle of thanks for your quick and kind support brother.
Be Blessed
Take Care
Click to expand...
Click to collapse
Glad it is solved!
Hello,
I tried to install the new andoird wear 5.1.1 from this guide: http://forum.xda-developers.com/g-watch-r/general/install-android-wear-5-1-1-to-lg-g-t3114528
and after step 4 i close the "fastboot flash system system_gwr_5.1.1.img" before the install is done (i wait an hour and nothing append).
And now i stuck on the LG logo.
I tried to install again by the guide, but i cant use fastboot, it's write "wating for device".
What to do?
Thanks!
Edit: now the watch reach to the Android system but I have problem with the touch screen that not response. And because of that I can reach to the bootloader and the recovery mode...
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Genna7 said:
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Click to expand...
Click to collapse
The touch screen doesn't work after I tried to update the Android wear.. So I can't go to the bootloader...
Someone? Please help!
I am willing to pay to the person that will help me find a solution.
Please help!
Have you figured this out yet?
Spyderekz said:
Have you figured this out yet?
Click to expand...
Click to collapse
No. You also have this problem?
There is a lot of people with this problem in this forum...
Someone know a place that specializes in android wear watches? (please send me, no one knows how to solve this problem here )
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
TML1504 said:
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
Click to expand...
Click to collapse
The computer does not recognize the watch at all...
same here
well, same here: no touch screen, device is not recognized (but boots up to welcome screen) => not able to get into bootloader. Guess, I have to activate developer/debugging mode in the Wear-settings to get it recognized. But how, without touch? Any ideas?
So do you think there is hope for unbricking the watch R from that state ? (mine is the same)
Maybe LGFlashtool will work ? maybe TOT firmware file will be available ?
I am having the same issue after trying to install the stock rom, probably a wrong rom. The watch boots onto a lg logo, stays for a minute or so and reboots into a a boot loop. There is no way to access bootloader or fastboot. Swipe to enter bootloader does not work, tried hundred times, it is like the screen were unresponsive. I have no idea what to do, seems it is bricked.
If I keep pressed the physical button then reboots but lg logo again after a long vibration. Drained the battery, put it on the cradle and then boots onto the lg logo.
anyone?
anyone here has found a solution for this issue?
I am also in the same situation. LG logo stuck after installing a new rom, unresponsive screen no mather if connected to the charger or not. Tried with different computers and OSses, the watch is not recognised.
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
Link to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
johnnyle7 said:
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
["h**ps: //android. googleapis.com/packages/ota/lge_bass_bass/7252d535d6a18047daaf3bfd4745f1c86ef7e7f1.signed-bass-ota-2576000.zip"] to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video ["h**ps: //w*w. youtube.com/watch?v=ZmBY9KM1NE8"].
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
Click to expand...
Click to collapse
There is no way to put watch into bootloader mode since screen does not respond.
jogo said:
There is no way to put watch into bootloader mode since screen does not respond.
Click to expand...
Click to collapse
did u watch the video in one of the posts above?
johnnyle7 said:
did u watch the video in one of the posts above?
Click to expand...
Click to collapse
I did. The screen does no respond to touch so 11 to 4 does not work either. I hace tried hundred times and even tapping with 2 fingers which I have seen working in any other vĂdeo around
same over here.
And this happened without tryng to hack anything (for once in my life)
any update?
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Was the boot img rooted, is that why you have no recovery? If so, just boot to fastboot mode and flash stock boot instead of root, that should have recovery
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Can you go to bootloader screen ?
If you can
Just use the full stock Rom
Flash it
---------- Post added at 04:45 PM ---------- Previous post was at 04:42 PM ----------
https://drive.google.com/file/d/1M2V1Jh2CS5vt1xbQYlDvhxfu0yB6hmZi/view
Download the Full Rom
Extract it
Use the exe file to install with bootloader screen
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
trustedenemy said:
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
Click to expand...
Click to collapse
Did you fix it ?
rowihel2012 said:
Did you fix it ?
Click to expand...
Click to collapse
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
trustedenemy said:
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
Click to expand...
Click to collapse
But you get fastboot mode, just plug the USB in side port and flash latest raw WW Rom.
Here's the link to 1908.21
https://drive.google.com/file/d/13Mgz9GhopE-DUsGT3N_5qC283cKkUxYb/view?usp=drivesdk
Once in fastboot mode (the first menu you see, before selecting recovery, start, power off etc is fastboot mode) check your device is recognised with fastboot devices cmd and then run flashall_AFT.cmd that'll get back your working rom . But also, delete or move the original zip from that same extracted folder, the raw rom with the same name confuses the flashall_AFT.cmd
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
trustedenemy said:
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
Click to expand...
Click to collapse
Did you let the raw rom flash entirely? It should take a minimum of 10 minutes... The phone should reboot twice (I think) as it completes... Maybe try again, but I'm not familiar with that message...
If the phone doesn't reboot, I would let it run for a half hour or so before rebooting...
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Excellent, glad you got it working again
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Yes this way always fix bootloap problem
Thanks asus for this easy flashing