Database Develop

[KERNEL] Overclocking 1.2.6/1.5.7! SetCPU support!

unknown and I got overclocking working in the regular 1.2.6/1.5.7 kernel. This does seem to fully work with SetCPU. Wifi and sound still work. This is only a 1.1ghz overclock for safety. With the patch you can do more. Note, don't change the frequency it boots at from 1ghz. The original patch made it 1.1ghz, and it failed to boot for us.
This work is almost a straight port of faux123's code from the G2X. His work is based on others' earlier work. unknown got the final idea that made it work from looking at kholk's source.
Kernel
Ramdisk
Kernel source
Patch
Kernel config
Instructions:
1. Download kernel and ramdisk
2. Connect phone to PC via USB cable.
3. Boot phone into fastboot mode. Vol down and then vol up during early boot.
4. Run fastboot flash:raw zImage ramdisk.gz
Thanks unknown!
Thanks faux123!
Thanks kholk!

This is the secks!
This is why is important to share source, this is why devs that play nice, get the work done!

awesome.. Though I don't think i'll go back to froyo, this should still show how far the processors powers can be pushed! (here's to hoping for 1.8Ghz stable :> lolol)

Is this a complete own kernel on its own? And if so what kind of optimization is in it
Sent from my MB860 using XDA App

Firefox can't establish a connection to the server at higgs.cygnusx-1.org.

I appreciate your work guys, but the only ones willing to go through and install a custom kernel IMO are already using 1.8.3 or 2.3.4

rdubyah said:
Firefox can't establish a connection to the server at higgs.cygnusx-1.org.
Click to expand...
Click to collapse
problem fixed!

Outstanding, thank you!

Very nice work, Edgan. Can't wait to get hands on the 2.3.4 kernel source once the OTA hits..

ahjdmarchi said:
Is this a complete own kernel on its own? And if so what kind of optimization is in it
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Not sure what you mean. This is the original Motorola/AT&T US 1.2.6 kernel source, with the kernel configuration file from 1.5.7, and the overclocking patch. It has no other optimizations.
This is more of a proof of concept. Since we don't have original source for 1.8.3 or Android 2.3.x releases.

Thanks for the explanation edgan
edgan said:
Not sure what you mean. This is the original Motorola/AT&T US 1.2.6 kernel source, with the kernel configuration file from 1.5.7, and the overclocking patch. It has no other optimizations.
This is more of a proof of concept. Since we don't have original source for 1.8.3 or Android 2.3.x releases.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App

Great work guys

help
what is the install code

how do you install the patch file

The patch AFAIK is for the kernel sources.
If you need to use the kernel flash the zimage.

explain in noob terms

troypage1994 said:
explain in noob terms
Click to expand...
Click to collapse
at dos prompt
cd c:\(your fastboot folder path)
fastboot flash:raw zImage ramdisk.gz

i have already done thathow do iinstall the patch file

troypage1994 said:
i have already done thathow do iinstall the patch file
Click to expand...
Click to collapse
Unless u are compiling the kernal yourself u don't need the patch. If you are u should know how to use the patch
Sent from my Xoom using Tapatalk

Cool =)
Atrix ~_~

Help regarding 'Franco.Kernal' updates for UK SNote please?

Hello Members, i have a UK SNote GT-N7000 and it's running ICS 4.0.3, it's also using the 'franco.kernal r5'.
The kernal was installed during a procedure i followed from RootGalaxynote.com on rooting ICS SNote without needing a computer to do it, (just running CW recovery.zip, then using it to installed files for superuser, then installing franco kernal r5)
What i've found is that there are updates of franco kernal form version R6 right upto R12 through web searching,, and searching this forum, do these updates apply to my UK SNote and if they do, should or can they be installed using the same method as i did when following the Rootgalaxynote video tutorial.
I know there is a Franco Kernal Updater on the Google Play market, and another one from the same developer specific to SNote, but this app hasn't been updated for a while or so the reveiws point out, anyway i'd rather not run any additional sofware just to update the kernal if it can be done in the same way as it was originally .
Any help from members, and any links to the correct franco.kernal version download for my SNote would also be a great help.
kind regards
Livio

franco.Kernel r12 - Sound Control V2* Flash via Mobile Odin.download here :http://minooch.com/franciscofranco/SGS3/
download mobile ODIN here ; http://forum.xda-developers.com/attachment.php?attachmentid=1187090&d=1341847735

devid801 said:
franco.Kernel r12 - Sound Control V2* Flash via Mobile Odin.download here :http://minooch.com/franciscofranco/SGS3/
download mobile ODIN here ; http://forum.xda-developers.com/attachment.php?attachmentid=1187090&d=1341847735
Click to expand...
Click to collapse
That's an SGS3 kernel!
As far as I'm aware Franco doesn't support the Note anymore.
Regards,
Dave
Sent from my Nexus 7 using Tapatalk 2

foxmeister said:
That's an SGS3 kernel!
As far as I'm aware Franco doesn't support the Note anymore.
Regards,
Dave
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I also heard / read that the dev. of the Note kernel has stopped. I think V6 is the latest / last release....

Sorry!!!!! today my pc got crazy......

devid801 said:
Sorry!!!!! today my pc got crazy......
Click to expand...
Click to collapse
Thanks Members, but I feel I'm still a bit confused so bear with me please.
So far my understanding from your replies is that the Franco. Kernal r6 is the last version supporting the SNote, but there are millions who have the phone and have installed franco's Kernal thinking that when Samsung issues the UK official ICS 4.0.4 update, and possibly Jelly bean's 4.1 in GNote's future, that surely the Kernal will need tweaking and have bugs working with these upcoming updates.
This is a real let down..... Franco, if your reading this please change your mind, and continue to monitor your Kernal for the SNote, after all, what will happen next when the SNote 2 comes out, we he drop SGS3 support, The SNote 2's only round the corner.
The other point I was confused about was needing to install 'mobile odin' if I was going to update to version r6. As I mentioned in my original post I didn't need to install any software to install Franco. Kernal r5 other than using CW mod recovery, the video instructions I followed (link below)
rootgalaxynote(dot)com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
Also, if I wanted to download Franco.kernal r6, could I use the file copy from the same 'downloadandroidrom.com website described in the video tutorial above (address below)
downloadandroidrom(dot)com/file/GalaxyNote/kernels/FrancoICS
Regards

I saw the video (no computer required root), you want to use the same matodo francokernel to update, simply download the zip file and flash CWM recovery!
Thread here : http://forum.xda-developers.com/showthread.php?t=1491428

devid801 said:
I saw the video (no computer required root), you want to use the same matodo francokernel to update, simply download the zip file and flash CWM recovery!
Thread here : http://forum.xda-developers.com/showthread.php?t=1491428
Click to expand...
Click to collapse
Thanks devid801 for the help, and link to franco's thread.
I'll give it a go later today using the same install method, hopefully I won't 'brick' the phone doing it, I'll post back whatever the result.
Regards

devid801 said:
I saw the video (no computer required root), you want to use the same matodo francokernel to update, simply download the zip file and flash CWM recovery!
Thread here : http://forum.xda-developers.com/showthread.php?t=1491428
Click to expand...
Click to collapse
Hi devid801, I followed what I did before and think the Kernal has been successfully updated, but can't be sure, if it has then the Kernal version of the phone now reads.....
3.0.15 - Franco. Kernal
Francisco @ Francisco #6
SMP PREEMPT WED JUN 13 01:13:24 WEST 2012
..... Is the '#6' part above the indication that it is now version 6 (I know it may seem obvious to others, but I don't know for sure)
At the moment the phone running well, so a confirmation from you, or another member would be great.
Regards

[Q] tun.ko P97030b-EUR

Hi!
To run a VPN Client i need a tun.ko. I´m a noob and not able to compile it myself, so please help
Android Version 4.0.4
Kernel 3.0.8
Software Version P97030b-EUR-xx
Build Number IMM76L.P97030b-EUR-xx.4832D2C3
Thanks....

Golga said:
Hi!
To run a VPN Client i need a tun.ko. I´m a noob and not able to compile it myself, so please help
Android Version 4.0.4
Kernel 3.0.8
Software Version P97030b-EUR-xx
Build Number IMM76L.P97030b-EUR-xx.4832D2C3
Thanks....
Click to expand...
Click to collapse
There already is vpn integrated into the ROM, so in fact you shouldnt need it...
Sent from my LG-P970 using xda app-developers app

N00BY0815 said:
There already is vpn integrated into the ROM, so in fact you shouldnt need it...
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Hm... it says its not able to establish an tun/tap interface...
I rooted it, and now its working fine with VPNC, VPNCilla is still not working.
Thx for help anyway....

N00BY0815 said:
There already is vpn integrated into the ROM, so in fact you shouldnt need it...
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Im facing similar problem, I want to try a VPN connection with the built in VPN, and need to provide RSA Certificates and Keys (I already have the files) where do i need to store them?
On other hand, O tried the TUN.ko modules from http://forum.xda-developers.com/showthread.php?t=1547348 and OpenVPN with no luck.
Any ideas how to load the modules, or where to finde a tun.ko that is compatible with V30B (with your kernel, im using Nemesis #1 by rrgrrg)
Thanks!

agtpirrone said:
Im facing similar problem, I want to try a VPN connection with the built in VPN, and need to provide RSA Certificates and Keys (I already have the files) where do i need to store them?
On other hand, O tried the TUN.ko modules from http://forum.xda-developers.com/showthread.php?t=1547348 and OpenVPN with no luck.
Any ideas how to load the modules, or where to finde a tun.ko that is compatible with V30B (with your kernel, im using Nemesis #1 by rrgrrg)
Thanks!
Click to expand...
Click to collapse
Kernel modules need to be compiled specifically for every kernel.
There is a install certificates from sd somewhere. (or at least there was in GB)

[KERNEL][newbl][20131212] 3.1 Kernel (based on hjunii port)

This is about the 3.1 kernel.
The base is hjunii kernel port. (Thank you)
More information will follow.
Changelog:
20131212-kernel-31-newbl.zip
- enable all base and recomended kernel stettings that google tells for android kernels
- KSM enabled
- zram settings to use all possible stuff from android 4.4
20131211-kernel-31-newbl.zip
- wlan fixed
- scsi disabled
- some modules build into kernel
kernel-31-newbl.zip
- initial (most things are working, but now wlan)
Sources:
github

DJNoXD said:
This is about the 3.1 kernel.
The base is hjunii kernel port. (Thank you)
More information will follow.
At the moment you can't use wlan with this kernel.
Click to expand...
Click to collapse
Great work @hjunii and @DJNoXD
waiting for the polished diamond soon my friend
Thanks

For now, everything is working ok, except:
Kowalski manager can not be opened, it tells me that I do not use Kowalski kernel, so no automatic light.
Thank you for brought 3.1. kernel on this old phone.

hi
Maximum frequency is 1000MHz in Kernelcontrol: (
wifi does not work: (
brightness leds 100%: (
But AMAZING WORK
Is just the beginning
Thanks
sorry my english

@hjunii & @DJNoXD:good::good:Thank You, Guy's!...:good::good:

awesome hope wifi is fixed soon... have everyone a link to the original SU660 Kernel? i wanna see the features of the kernel

wucinac said:
For now, everything is working ok, except:
Kowalski manager can not be opened, it tells me that I do not use Kowalski kernel, so no automatic light.
Thank you for brought 3.1. kernel on this old phone.
Click to expand...
Click to collapse
Hi
Of course Kowalski Manager can't be opened, since you don't run the Kowalski Kernel on your phone (as the program "printed"). This kernel is not the Kowalski Kernel. You'd have to install KK to make Kowalski Manager to work.

Gainer5 said:
Hi
Of course Kowalski Manager can't be opened, since you don't run the Kowalski Kernel on your phone (as the program "printed"). This kernel is not the Kowalski Kernel. You'd have to install KK to make Kowalski Manager to work.
Click to expand...
Click to collapse
I know. That's why I wrote it, but you have better explanation:thumbup::beer:
Sent from my LG-P990 using Tapatalk

Holy....
Great thanks to @DJNoXD* / @hjunii**
hope you and the other devs will polish it to perfection ;>
*Updating
**Porting

Next thing I do is working on wifi (bcmhd is the better choice) and enabling the stuff needed for the network data

wifi fixed
trying the data part and than release it.

You are so fast Thank you!

I can't even follow all the thing what happened today. 3.1 kernel on p990! android 4.4 is evolving fast!, less bugs!
Respect for all your works developers!!

Great job @DJNoXD! Your speed is really impressive and its amazing to see this new enthusiasm for our phone. I will need at least two days to thank everybody who contributed to this.

@DJNoXD is necessary to have the twrp?
I attend the wifi fix,
You and @hjunii have done a good work until now!!!

droide_volante said:
@DJNoXD is necessary to have the twrp?
I attend the wifi fix,
You and @hjunii have done a good work until now!!!
Click to expand...
Click to collapse
no , not necessary .

New Kernel tomorrow. I am going to bed now.
Sent from my LG-P990 using XDA Premium 4 mobile app

DJNoXD said:
New Kernel tomorrow. I am going to bed now.
Sent from my LG-P990 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried connecting my mw600 headset but the Bluetooth kept switching off and on. I was unable to connect, didnt try to send files to another mobile via bluetooth.
Sent from my LG-P990 using Tapatalk 2

Wat wat wat wat?! Man, let me say it, you're absolutely a hero of p990! That's a miracle, you come from nowhere and bring us 4.4 rom and 3.1 kernel. I can just say a real thanks.
Sent from my LG-P990 using xda app-developers app

proyatzu said:
Wat wat wat wat?! Man, let me say it, you're absolutely a hero of p990! That's a miracle, you come from nowhere and bring us 4.4 rom and 3.1 kernel. I can just say a real thanks.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Well, as a matter of fact. He is a known Dev from lg P500 forums. He did worked on kernels for this device. And it is a awesome work there.
Having him now working on this device, working together with Super Devs like @tonyp and @pengus77 anything is possible now...
Sent from my LG-P990 using xda app-developers app

[Mod]-[Custom]Kali Nethunter 1.21

Hey hii all, how are you .. This is a thread dedicated to Kali linux Nethunter which is available for our Nexus 5 .. Thanks to offensive security for providing kali linux for our phons ..
Download - https://www.offensive-security.com/kali-linux-nethunter-download/
So after flashing latest Nethunter image on most roms, nethunter tend to break all roms, so i found a workaround here that will work on any rom, and you will be able to use that with no problems ...Thanks to @DragonHunt3r for providing such a great workaround and an equally great pwnkernel
Open up the NetHunter zip, and go to META-INF/com/google/android/updater-script
Go to line 101 or where "package_extract_file("boot.img", "/dev/block/platform/msm_sdcc.1/by-name/boot");"
Remove that line and save the zip and flash it, and after that flash PwnKernel
Any questions and discussions ..please feel free to use this thread ..
To moderators - if you find that this thread is of no use so feel free to remove it
Sent from my Nexus 5 using Tapatalk

tusshar.gaba said:
Hey hii all, how are you .. This is a thread dedicated to Kali linux Nethunter which is available for our Nexus 5 .. Thanks to offensive security for providing kali linux for our phons ..
Download - https://www.offensive-security.com/kali-linux-nethunter-download/
Any questions and discussions ..please feel free to use this thread ..
To moderators - if you find that this thread is of no use so feel free to remove it
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
What kind of mod is this?
Sent from Mars

It works pretty well, although battery drain is huge at least using Alfa AWUS036H
OptimusVDarwin said:
What kind of mod is this?
Sent from Mars
Click to expand...
Click to collapse
It changes kernel and adds some apps for wifi penetration testing, such as wifite

I m having problem with using nethunter on my Nexus 5 currently ..actually i cant make it work ..tried flashing over Euphoria rom, paranoid rom, even stock lollipop lrx210 (5.0) rom ..but after flashing the nethunter 1.2.1 lollipop version ..it broke all roms ..everything crashed ..so unable to use rom..i tried this on multirom..so i thought that might be the issue of multirom ...so i erased my phone completely ..after that flashed full stock 5.0 rom, rooted the device ,installed busybox then flashed nethunter ..again everything crashed ...even on euphoria and pa rom ....what else i can try ?? Everybody is using lollipop version with no problem ..but why my device isn't supporting it or maybe nethunter is bugged .. please someone help me
Sent from my Nexus 5 using Tapatalk

tusshar.gaba said:
I m having problem with using nethunter on my Nexus 5 currently ..actually i cant make it work ..tried flashing over Euphoria rom, paranoid rom, even stock lollipop lrx210 (5.0) rom ..but after flashing the nethunter 1.2.1 lollipop version ..it broke all roms ..everything crashed ..so unable to use rom..i tried this on multirom..so i thought that might be the issue of multirom ...so i erased my phone completely ..after that flashed full stock 5.0 rom, rooted the device ,installed busybox then flashed nethunter ..again everything crashed ...even on euphoria and pa rom ....what else i can try ?? Everybody is using lollipop version with no problem ..but why my device isn't supporting it or maybe nethunter is bugged .. please someone help me
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Everything solved ...check my first post thanks @DragonHunt3r
Sent from my Nexus 5 using Tapatalk

I deleted the line as stated in post 1
I had deleted the line as instructed, but now that I have been trying to flash it with TWRP, it reads as failed or unable. Any idea or clarity on the issue.

Sent from my Nexus 5 using XDA Free mobile app