Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
BuDDaH said:
Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
Click to expand...
Click to collapse
yup same problem. i cut the case a bit and now it dont look nice . but it works.
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
vsrookie said:
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
Click to expand...
Click to collapse
Had the same issue what you need to do is force phone by slotting it into case then pull the lip over the screen protector. Do this to all corners and you'll have no issues.
vsrookie said:
Hi.
My problem was that one corner of the glass doesn't stick to the LCD. After I applied the silikoncase it fits.
I have the case that come with the phone.
I stretched it a little bit over the corners of the phones without heat.
Greetings
Click to expand...
Click to collapse
Congrats on having it fixed without any drastic measures! I went the 'cutting route' for now since I had to replace the screen protector and didn't want to risk another one.
But I've got another set of silicone cases coming from aliexpress to check if they are a bit better!
I've got 2 P9000's (one for me one for my girlfriend) so actually I already wrecked 2 screen protectors.
Same problem here. Original case and aliexpress case. No luck.
i bought the official flip case and tempered glass.
tried the case first which fit but found the buttons a bit hard to press.
if you fold the case front behind the phone the camera is blocked also.
could view the on screen clock and notifications through the case screen window.
once applied the tempered glass the phone wouldn't recognize the flip case, so when i closed it over the screen remained on and the case window became useless.
this company do nothing right do they.
Had to struggle the same problem, but now i could fix it.
Just make sure the glass is positioned in centre on the screen. When putting on the case, make sure the case slips properly over the first 3 corners. For the last one, you can use any tool (i a used knife, but be careful ) to overlap the edge of the silicon case with the tempered glass.
No matter what I did, it wouldn't do it without lifting the glass
Sent from my P9000 using Tapatalk
I have the same issue (sometimes) with matte film protectors and the standard case.
Always on the top right corner for me - where I've got fractionally less unprotected screen , so maybe very precise alignment of the screen protector would help you?
Pulling the case over the edge of the screen with my fingernails was enough for me
Cut the flip in the flip-case.
BuDDaH said:
Hi All,
My preferred phone protection is to have a tempered glass screen protector and silicone case. Saved my old phone from bad damage a couple times while bouncing on the street.
Now... the challenge I have with the P9000 is that the silicone case that came with the phone doesn't go 'over' the edges of the tempered glass protector and pushes it off.
rather annoying!
Ordered some other silicone cases on Aliexpress but the same problem.
Anybody found a nice case that does the trick? Tried 'heat stretching' the case a bit for a better fit but no luck so far.
thanks!
Click to expand...
Click to collapse
Cut the flip in the flip-case. Just kepping the hard back. This way you can use the glass and have back protection. I did this and works fine.
I use this glass protector - http://www.ebay.com/itm/282044598237?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
there is a space between the silicon case and the glass so they don't touch each other
sluiz said:
Cut the flip in the flip-case. Just kepping the hard back. This way you can use the glass and have back protection. I did this and works fine.
Click to expand...
Click to collapse
The hard back in the flip case is useless. Too fragile, corners and button covers break easily, my P9000 fell just once not too hard and the screen left upper corner broke. Silicone cover is better protection
u can use scotch tape on the bottom corners of the glass to stop it from lifting, funny idea but works, if u want to save a new case cost.
Related
I'm going to post one at a time...so the pictures don't get confused with others. I hope this helps
.....1.....The SNP Tempered Glass Protector (Price $32.00)
This one took a long time to receive it since it was coming from Korea with really slow cheap shipment, but the product had no damage so it was all good.
I thought I did good installation on the Tempered glass protector, but all around the edges I had gap (You can see it from the pictures). I contacted the seller and they told me that this screen protector is not for Verizon model, because of the 1mm curved edges. I guess the Korean version of the G2 don't have curved edges and I don't know about Atnt or Tmobile models.
So they gave me a full refund, since they didn't mention that it is not for Verizon models.
But if you have the Korean Version of the phone I really recommend it.
The Tempered glass protector covers close to edge to edge. The responsiveness and the clarity is excellent. The feel of this screen protector is really good. My fingers were sliding across really easy. Edges are smooth rounded so it feels smooth all around the edges.
Since the protector is close to edge to edge you can't use cases like the Diztronic cases or SGP Slim armor, etc. since it interfere with the screen protector that it will lift up the screen protector.
So you have to use the ones like Poetic Palette or Incipio Feather cases or etc.
Even though it had gaps all around the edges I have use this screen protector for 2 weeks and I had no issue with clarity or sensitivity. Overall performance of this tempered glass protector is really fantastic. If this had fit my phone then this one was a keeper...but It was just sad that it didn't fit my G2.
.....2..... Scosche 2.1A High Amp Dual USB Car Charger (Price $6.00)
If you are looking for fast dual USB car charger this one works out great. Like other dual USB car chargers have one 2.1A and one 1.0A Charging ports but Scosche car charging ports are both 2.1A charging ports. In other words...Scosche car chargers will charge 2 devices about the same speed as the OEM wall charger that you got when you bought your G2. It charges really fast.
Overall performance is really excellent. I have used this car charger for over 2 weeks now and have no problem so far. This just does exactly what it is suppose to do. It charges the phone as fast as the rapid wall charger, so this is a keeper for me. In my opinion this car charger is cheap compare other car chargers that charges slower than this.
.....3.....The Hohoo 9H Screen Protector (Price $12.50)
First this screen protector is NOT TEMPERED GLASS SCREEN PROTECTOR. This screen protector is made out of PMMA (Poly Methyl Methacrylate), it's basically acrylic. Im saying this because some of the sellers are posting this as a tempered glass protector when it is clearly not. There is a reason why the price point is low.
This one was a defected product which the top part of the screen protector adhesive part was not good that it made air gaps and if I leave it on for a couple of minutes it lifts up by itself, so I contacted the seller and the seller told me that he is sending a new one for me.
The installation wasn't that hard. The screen response was good and the screen clarity was really good. It feel like I was touching a tempered glass screen protector. My fingers glide really smooth. The screen protector size is basically little bit bigger than the screen, but it doesn't cover up the whole front side. In my opinion this is a really good size for the screen protector. Since I can put on Diztronic TPU cases without interfering with the screen protector (just has a tiny gap between the screen protector and the case edges).
Even though this was a defected product everything really work great except for the adhesive part. Going to wait for new one for my final opinion on this screen protector.
...4....The Hohoo 9H Screen Protector (Replacement)
I have received the replacement screen protector and the first thing that I have notice was that the boxing image was different from the first one that they have sent me. The next thing that was different was when I was installing it was the sensor area cut out. It doesn't make a huge difference but just fyi.
The second screen protector that I received had really good adhesives so I didn't get any air gaps. I had no issue with any sensitivity. The screen protector feels really smooth and my fingers slides through easily. The best part about this protector is that the size. I really think this is the best screen protector size for VZW G2.
I really like this screen protector but one problem for me with the screen protector was when I go outside in a really cold weather (near about 0°C) the protector just lifts up by itself for some reason. But if I put it back in a room temperature for a bit it start sticking back to the screen...I have tested 5 times doing this and also sent an email to the seller and the seller just gave me a refund. But in room temperature it doesn't have any problem. The adhesive is actually really good that even though I reattached it more than 5 times it didn't made any gaps or lifting in room temperature. This might be the material of the screen protector problem or I might have got a bad batch but in my experience it happen like that.
Overall performance is excellent. If I didn't had any issue with the lifting then this screen protector was a keeper for me. In my opinion the feel and strength and display is in the same level as the tempered glass protector. If you want tempered glass protector like features without paying a lot. This screen protector might fit for you.
I still have this screen protector on since I don't have any issue in room temperature. But I just have order a new tempered glass protector made from Glassview. It should be coming soon so until then I'm going to keep using this screen protector.
.....5..... Diztronic Cases (Price $10.00)
First impression with these cases were that it's really slim case. Diztronic cases are made out of TPU material. I have purchase two of Diztronic cases, matted black and clear type. Both types of cases have really good grip. The matted black case had so much better resistance against finger prints than the clear case. The matted black case had little bit more slippery feeling than the clear case, but the Matted black looks better than the clear one in my opinion. One final difference between these two types of cases is that the matted black case is $1 more expensive than the clear case.
All the cut out holes were perfectly aligned. On the top it has a lip that even though you put it face down it will protect from the screen touching the surface. This case purpose is basically to protect against everyday use scratches. If you drop the phone with this case on I really don't think this case will protect it from saving your phone.
Overall, if you want a slim case that doesn't any much bulk and protects every corner of your phone this is perfect. But for some reason if you think you will drop the phone get more bulkier case like Otterbox or Incipio Dualpro or etc.
.....6.....Incipio Feather Shine Case (Price $29.99)
I have used this case for over 2 weeks now and it is just perfect for me. Especially the back aluminum finish looks really nice and I don't have to worry about finger prints on the back of my phone anymore. The case fits really tight so there is no worry that the phone is just going to fall off from the case. This case is a really low profile case that it only covers the back and the sides and the four corners of the phone, but not covering the bottom and the top of the phone. This case have slightly lower profile than the Diztronic cases. It has a really small lip on the side of the phone. The lip of the case was about the same size as my screen protector that if I put it face down the screen protector is touching the bottom too. Since my screen protector's thickness is around 0.33mm so I'm assuming that the lip size is around 0.33mm. I'm not too worry about putting my phone face down since the screen protector I have so far stood up pretty good, but if you don't have screen protector just be careful if you are putting it face down.
The back aluminum finish looks nice but it makes the phone a bit slippery. I got some scratches on the aluminum finished back already, I think these scratches came from the keys that was in my pocket. I mean the phone case purpose is to prevent from scratching the actual phone so it is doing its job but it got scratched way too easily than what I was expecting from this case. I think my Hohoo screen protector is so much better against scratches than the aluminum finished case since my screen protector haven't got any scratches so far.
A lot of people complain about this case because of the signal lost, but to me so far I have not lost any signals or the case cause a weak signal. I'm getting the same signal bar with or without the case. I think some people complaining about the signal lost with this case on have got a bad batch of the case.
Overall, I think if you want a really low profile case with really nice look on the back then this case might be good for you. This is not a drop proof case. It's the same thing that I said about Diztronic cases, this is not the case that you want if you think you are going to drop your phone. This case is basically to prevent from everyday scratches.
Did you ever receive that screen protector from Glassview?
Do the screen protectors need to specifically say for verizon? Or are they compatible with any model? I want to buy some screen protectors but they dont specify what model just lg g2
kalooann said:
.....5..... Diztronic Cases (Price $10.00)
Click to expand...
Click to collapse
This is definitely a great case for those who are looking for something to make the phone a little easier to hold and protect the back from scratches. The outer lip lets me put my phone face down whereas before I would be afraid of scratching the screen.
Heres an older thread for those interested in more pics. http://forum.xda-developers.com/showthread.php?t=2461151
JRJ442 said:
Did you ever receive that screen protector from Glassview?
Click to expand...
Click to collapse
Yes I have received the Glassview Tempered Glass protector...Im using it right now for a couple of days to see if this is good or not. So far I like it.
Ill post pictures later.
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
blueis300 said:
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
Click to expand...
Click to collapse
....what are you talking about...
I use the VZW Screen Protectors they had because I got 20% off the phone (when you buy 2 accessories) and they were like $7 for 3. The VZW guy didn't put it on very well but I used the second one and a hinge method to get it perfectly aligned and centered.
I use a Incipio Feather Rubber Matte Case and it doesn't affect the Screen Protector. The Diztronics are cool but I don't like the big lips around the edges that will screw with the protector sometimes. No problems with the Incipio.
Screen protectors are compatible for all models of G2. Only the Verizon Cases are different because I guess it is a 1mm thicker due to addition of Qi Charging.
the SNP Tempered Glass Protector fit in international model D802??
What do you like better, Diz or the Feather?
trifos said:
the SNP Tempered Glass Protector fit in international model D802??
Click to expand...
Click to collapse
I think so, but if I were you Ill just buy Glassview Tempered Glass Protector than SNP.
IamPro said:
What do you like better, Diz or the Feather?
Click to expand...
Click to collapse
I like both but Im using Feather Shine more than Diz right now.
.....7.....GlassView Tempered Glass Protector (Price $32.99)
I have used this Tempered Glass Protector for over 2 weeks now and I think this is the one that I'm going to keep.
First, the application process was really easy for me. I installed it in like 30s and was done with perfect alignment. The size and the cutout of this screen protector is just perfect. It avoid all the lifting all around the screen and it is really case friendly that it fits the Diztronic cases. Im not too sure about the bulkier cases like the otterbox or bulkier incipio cases since these cases use up a lot of bezel space. The Thickness is only 0.23mm but The quality of the screen protector is really good. It has 9H hardness that suppose to prevent from everyday scratches and more and it is also shatterproof. The sensitivity and feel of this screen protector is just fantastic. I had no issue with responsiveness and my fingers were gliding through really smoothly. It was really easy to wipes off the fingerprints from the screen protector. Between SNP and Hohoo Screen protector feel of the smoothness wise GlassView is a clear winner for me.
I think this tempered glass is better than the MIME Tempered Glass. Since MIME Tempered Glass is cut short on the sides that doesn't really completely cover the screen but GlassView is covers the whole screen.
Overall, I think this is the best Tempered Glass screen protector that you can find on the market right now (at least for me). I thought about buying iloome flex but it looked too thin and I really don't see that much difference between just regular screen protector and iloome flex. I wanted more sturdy screen protector and I think I found my winner. I think I'm going to stick with GlassView tempered glass protector for a quite a bit before I find something that is better.
I have an S6 edge white version and I dont know what screen pprotector should I buy the cheap 0.99$ or this http://m.ebay.com/itm/Premium-TPU-A...S6-Edge-2Front-1Back-/321739053198?nav=SEARCH
I would love to have the plastic and then the glass protector over it? :cyclops:
I NEED BEST PROTECTION AND IF I CRACK MY PPHONE I WILL GO HANG MYSELF AFTER I CRY AND CUT MY "BLOODLINES" SO ITS VERY IMPORTANT
xperiaking247 said:
I have an S6 edge white version and I dont know what screen pprotector should I buy the cheap 0.99$ or this http://m.ebay.com/itm/Premium-TPU-A...S6-Edge-2Front-1Back-/321739053198?nav=SEARCH
I would love to have the plastic and then the glass protector over it? :cyclops:
I NEED BEST PROTECTION AND IF I CRACK MY PPHONE I WILL GO HANG MYSELF AFTER I CRY AND CUT MY "BLOODLINES" SO ITS VERY IMPORTANT
Click to expand...
Click to collapse
Glass protectors on S6E is not fit very well and reduce responsiveness. I recommend to find a plastic protector with oleophobic coating.
Yeah thanks but what do you think about this on the link?? Can i put 2 plastic screen protectors will the digitizer work, touch responsivness? And if you know some screen protetor brands i dont want the flat only part i want to cover the edges
One more question
How does the plastic one protect phone? Just from scratches or and cracks?
xperiaking247 said:
How does the plastic one protect phone? Just from scratches or and cracks?
Click to expand...
Click to collapse
Plastic films protect the screen from minor scratches. You should aware genuine Samsung clear view covers scratching the phone which they are supposed to protect. I don't think tempered glass can protect dropped phone. To me, the advantage of tempered glass is its feeling being the same with phone screen because they are all glass, so easy to swipe. I bought this link and happy with it (located in Australia). I purchased several temper glasses and plastic films but each has its limit. The one I recommend to you is perfectly fit, responsive and fluid. However, its oleophobic layer doesn't work very well.
2e6 said:
Plastic films protect the screen from minor scratches. You should aware genuine Samsung clear view covers scratching the phone which they are supposed to protect. I don't think tempered glass can protect dropped phone. To me, the advantage of tempered glass is its feeling being the same with phone screen because they are all glass, so easy to swipe. I bought this link and happy with it (located in Australia). I purchased several temper glasses and plastic films but each has its limit. The one I recommend to you is perfectly fit, responsive and fluid. However, its oleophobic layer doesn't work very well.
Click to expand...
Click to collapse
Hi 2e6 thanks for the info but what do you think about this one http://m.ebay.com/itm/Premium-TPU-A...S6-Edge-2Front-1Back-/321739053198?nav=SEARCH
xperiaking247 said:
Hi 2e6 thanks for the info but what do you think about this one http://m.ebay.com/itm/Premium-TPU-A...S6-Edge-2Front-1Back-/321739053198?nav=SEARCH
Click to expand...
Click to collapse
I'm not sure about that, it may not be fluid/smooth when you swipe.
I'm wondering what type of adhesives are used to adhere screen protectors to the cell phone display. Maybe we can use some of strong, yet removable adhesives to help stick the screen protectors to the curved edges of the Galaxy S7 Edge. Then we can use whatever case we want and not worry about peeling edges.
Anyway, my question is about the types of adhesives used for this application.
Thanks!
dlancep said:
I'm wondering what type of adhesives are used to adhere screen protectors to the cell phone display. Maybe we can use some of strong, yet removable adhesives to help stick the screen protectors to the curved edges of the Galaxy S7 Edge. Then we can use whatever case we want and not worry about peeling edges.
Anyway, my question is about the types of adhesives used for this application.
Thanks!
Click to expand...
Click to collapse
There are a few used like silicone and double sided tape. Then you have wet and dry installed screen protectors which I'm not sure what adheres them. You don't want something too strong that would stick because they do get worn and need to be removed
Sonin66 said:
There are a few used like silicone and double sided tape. Then you have wet and dry installed screen protectors which I'm not sure what adheres them. You don't want something too strong that would stick because they do get worn and need to be removed
Click to expand...
Click to collapse
So could I use some regular clear silicone, like from Home Depot, to stick down the edges of a screen protector on the curved sides of the S7 Edge? How optically clear would that be? Would it be easy to remove later?
dlancep said:
So could I use some regular clear silicone, like from Home Depot, to stick down the edges of a screen protector on the curved sides of the S7 Edge? How optically clear would that be? Would it be easy to remove later?
Click to expand...
Click to collapse
I wouldn't but it's your phone. Don't know about regular silicone but what kind of screen protector are you trying to stick down that won't stay?! If your having trouble with screen protectors and cases, you can get a case friendly protector. Or if your looking for glass check out the thread about them. I'm running amazingthing and commuter case and it fits fine with no liftingood at all. I like cases but don't change them out often enough. I'd really just prefer a spring holster as that's what I used with my previous non samsung phones..
i have try the tpu protector, current techmology is very difficult to install on phone
The Edge screen with how most of the cases work today has caused me issues with almost every one I have tried. It always ends up getting peeled up at the top and the bottom and often the corners as well. I am considering trying to trim my skinomi screen protector to make it not get in the way of the case.
Why can't there be a tacky optically clear adhesive that we can use on the edges of screen protectors to make them stay down? The glass screen protectors have some sort of silicone adhesive on the edges, why not have that on PET or TPU protectors as well?
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
I've not found a "perfect" screen cover yet for the phone. I like the 2.5d screen but it makes finding a "perfect" tempered glass solution a problem. I have a full screen protector one on now and it's okay. I haven't found one of those that have adhesive on the entire back panel of the glass. The adhesive is only around the edges on the painted surfaces.
I have another one I haven't tried yet. It looks like it has adhesive on the entire back surface and the outer edges are made of carbon fiber (supposed to be anyway) The outer edges are at least a soft material that supposed to stick to the entire edge and curve around so that it fits a 2.5d screen better. The problem with the ones I bought is that you can't see the backlight from the buttons on the bottom of the phone. Not a deal breaker but a flaw in the design.
Do some searches on aliexpress or someplace and you'll see. Search for redmi note 4x carbon fiber to see the second one I mentioned and redmi note 4x tempered glass for the full screen ones I also mentioned. There are clear non full screen ones that don't go to the edges of the glass. I haven't purchased one of those and probably won't.
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
stephendt0 said:
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
Click to expand...
Click to collapse
I applied my tempered glass with my case on the phone. It's one of the full screen protectors with the painted frame around the outside. I think they do that to hide the fact that the glass doesn't fit to the curve. It looks good but I know it's not a perfect fit.
Upon research there appears to be fluid you can apply to the edges to get a perfect seal to remove the halo effect... I will investigate further
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
prisoner1969 said:
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
Click to expand...
Click to collapse
Yes... in my experience this doesn't last. I had two lift up and get dust underneath and then it was horrible after that. Also I got the weird rainbow effect in the middle of the glass and the keys at the bottom didn't line up exactly.
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
Buy from glazedinc.com
It's a perfect fit and it costs ₹400, they also provide cash on delivery in India.
Sent from my Moto G (4) using Tapatalk
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Atharkhan101 said:
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Click to expand...
Click to collapse
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
pooniaprashant said:
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Atharkhan101 said:
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Click to expand...
Click to collapse
tpu case was bought from local market (for about ₹150), if you are asking for tempered glass then just goto glazedinc.com
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
LT1UltraZ said:
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
Click to expand...
Click to collapse
I'm using a case friendly skinomi HD clear. the matte fits as well but I didn't like it.
Sent from my SM-N950U using Tapatalk
I got a zagg one from best buy. Expensive but zero problems since it's been on. The very edges have adhesive that is visible on the curved sides making a slight line. Not a deal breaker but it is there. No halo effect like I had on the note 5 protectors either. Expensive but I'm very happy so far.
Tech armor glass does.
The defender series for the note 8 works with the whitestone dome glass...
ange.mariie said:
The defender series for the note 8 works with the whitestone dome glass...
Click to expand...
Click to collapse
Any proof you could share by chance
I use the Zagg InvisibleShield HD
The edges don't stay down the best, but it works well with the Otterbox Defender case.
faded03cobra said:
Tech armor glass does.
Click to expand...
Click to collapse
Do you have a picture with the case on? I have the defender also and looking for a tempered glass
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
AlexanderBlaQ said:
Any proof you could share by chance
Click to expand...
Click to collapse
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
ange.mariie said:
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
Click to expand...
Click to collapse
Thanks I'll have to check that out
Otterbox has the Alpha Glass out already.. Was going to get a defender + alpha glass if I didnt already have a UAG plasma
Dont waste your money
ALPHA GLASS FOR NOTE 8 This is the WORST designed screen protector. It causes a major loss in screen sensitivity, to the point of having to tap screen several times, and press down with a good deal of pressure to get the screen to respond. There is a large gap at both top and bottom of screen. Adhesive is CLEARLY visable on all borders of the protector. I am extremely disappointed in the design of this! I have used alpha glass protectors before on my Samsung galaxy s8+ and was looking forward to the release of this one. I will be telling everyone i know to steer clear of this product! DO NOT WASTE YOUR MONEY~ YOU MIGHT AS WELL FLUSH IT DOWN THE TOILET~ I am a faithful customer of Otterbox, I love their cases, but this screen protector does not live to otterbox brand. I will stay a customer with their cases, but I will NEVER again purchase an alpha glass!
Otterbox defender & whitestone dome match made in heaven
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
ange.mariie said:
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
Click to expand...
Click to collapse
Could you keep us updated on your experience with this? A lot of other people have concluded that if the case is in contact with the screen protector, it will start lifting at some point.
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
kdatale said:
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
Click to expand...
Click to collapse
The screen protector is supposed to crack so your phone screen doesn't. My advise, if you like your note 8 put a screen on it! ?
Cut out your defender inner plastic
I've already wasted one expensive tempered glass (Araree tempered glass made in Korea, $29.99 + $8 international shipping to US).
When I used this expensive protector, there was some portion overlapped with Depender's inner plastic. Actually it made the tempered glass broken in the edge side.
So, what you can do is, using the sharp nife cut out Defender's plastic edge side where it contacts with glass screen protector. If you do this carefully, it won't look ugly. Or you can use the sand paper to remove some edge portion of plastic.
This Araree tempered glass (full cover) works great with Spigen neo hyprid case. No lift nor sensitivity loss.
I also found that Otterbox defender case works with Sammy's faster charger if we put the phone in the exact middle of the charger and with the charger plate is in plat position. But if we try to charge the phone with the charge plate is in vertical position, there was no way to charge the phone...
Wish I could have read this before I tried the UAG Prism case with the Best Buy installed Zagg glass protector. Cracked the upper left edge of the protector. I have an Otterbox Defender on and it's good. Unfortunately, right from the initial screen protector install, there was separation and touch sensitivity issues. Heading to Best Buy to have them put on another screen protector.
Mike02z said:
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
Click to expand...
Click to collapse
What screen protector will work with the otterbox defender for the Note 8?