Database Develop

[Q] HELLLP! nonworking screen turned into more serious problem while install 4.4.2!!!

i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3

tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue

Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)

[STOCK][Odin] OFFICIAL T713 STOCK FIRMWARE T713XAR1APD9

Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here

Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!

DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?

Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!

I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday

I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset

Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!

Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!

Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...

There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.

dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.

Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?

stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp

dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.

Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.

There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016

HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"

Tab 2 Odin Failing

I got an unlock code from T-Mobile and unlocked my S2 ( T817T, fully updated 5.1.1 ). I downloaded Odin 3.11 and have tried all 4 TWRP files:
twrp_2.8.7.1_LL_5.1.1_t710.tar
twrp_2.8.7.1_LL_5.1.1_t810
twrp_3.0.2-1_sm-t710
twrp_3.0.2-1_sm-t810
When I start the unlock in Download mode it reports:
Product Name: SM-T817T
ODIN MOE
Download speed: Fast
Current Binary: Samsung Official
System Status: Official
FRP Lock: ON
Secure Download : Enabled
KNOX Warranty Void: 0
AP SWREV: B:2 K:0 S:0
For all 4 TWRP images it completes the first block of the install progress bar then fails. When it fails the screen on my S2 reports:
FRP LOCK: ON
Custom Binary(RECOVERY) Blocked by FRP Lock
and the console of ODIN says:
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?

You need to enable OEM unlock in developer settings.

ashyx said:
You need to enable OEM unlock in developer settings.
Click to expand...
Click to collapse
Ok, that part worked. I saw the black screen go by with the installing SU but it looks like I'm in a reboot loop now.
** Edit, It looks like I put on a 5.0.2 recovery for a "T817" instead of 5.1.1 for T817T which doesn't exist. I only found the T817, T817P and T817R4....

Nomadadon said:
Ok, that part worked. I saw the black screen go by with the installing SU but it looks like I'm in a reboot loop now.
** Edit, It looks like I put on a 5.0.2 recovery for a "T817" instead of 5.1.1 for T817T which doesn't exist. I only found the T817, T817P and T817R4....
Click to expand...
Click to collapse
You can use TWRP for the T810 or T815.
Which supersu version did you install or did you allow twrp to install it's own version?

ashyx said:
You can use TWRP for the T810 or T815.
Which supersu version did you install or did you allow twrp to install it's own version?
Click to expand...
Click to collapse
Never got that far with TWRP. I'll try it next. I have BETA-SuperSU-v2.52.zip downloaded, but with Heimdall don't see how to install it.

Ok, It looks like installing all 3 steps from http://forum.xda-developers.com/tab-s2/general/guide-root-tab-s2-t3205019 ( You have to reboot after step 2 ) works. I've got root.

N900A Complicated hard brick help.

My phone is SM-N900A
First of all, I didn't know that it was rooted then when I downloaded the latest updates it was un-rooted.
Because I'm ignorant and didn't know what to do, I tried re-rooting it via KINGO. But, it always fail at 90%
I always get this problem in my ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
The next thing I did was skipped the procedure and tried rooting it thus, resulting to my phone being hard bricked.
Afterwards, I downloaded the stock rom for my phone so that I could try un-bricking it.
However, when I try to flash it with stock rom It kept failing and getting the same results ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
So, what should I do now? I really love this phone and I want to unbrick it then re-root it again.
Would you guys help me in this complicated failure of mine.
Here's the Odin text:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What ROM was on your phone before flashing? Did you confirm the model # in download mode?

audit13 said:
What ROM was on your phone before flashing? Did you confirm the model # in download mode?
Click to expand...
Click to collapse
My ROM was for N900A Android 5.0
Model # do you mean the product name? If it is, it says SM-N900A.
ODIN MODE
PRODUCT NAME: SM-N900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
SECURE DOWNLOAD : ENABLE
UDC START
This what it says in Odin mode

Did you try using different USB cables and all available USB ports?

audit13 said:
Did you try using different USB cables and all available USB ports?
Click to expand...
Click to collapse
I'll try using different cable and ports.
But, if it still didn't work, what do you think its problem?
Can it be fixed?
* I tried every usb ports and cable I have, it is 5 to be exact but I still get the same results.

Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?

audit13 said:
Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?
Click to expand...
Click to collapse
It's the latest ROM Android 5.0

The latest ROM I see for the sm-n900a is only 4.3: http://www.sammobile.com/firmwares/database/SM-N900A/

SM-9208 (Taiwan) cannot flash TWRP through ODIN

HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it ( i.imgsafe.org/ce3bada933 .jpg) remove space before .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks

..

Got the same problem after latest update of my note 5 SM-N9208 from Philippines.

yogiexp said:
blue screen error with chinese text i.imgsafe.org/ce3bada933 .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
Click to expand...
Click to collapse
Tried it but doesn't work.

yogiexp said:
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
Click to expand...
Click to collapse
Just found a way to get TWRP back on my note 5.
I flashed with odin the Chainfire autoroot Auto-Root-noblelte-nobleltextc-smn9208.tar.md5
Your phone will get stuck on boot screen and it will say in left upper corner "seandroid not enforcing".
Push volume down + home + on/off, to get back in download mode.
Flash with odin the TWRP file.
Now you will have working TWRP (i rooted my phone directly)
It worked for me, let me know if it worked for you.
Regards,
Pr4d0

Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g

dhonzik said:
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
Click to expand...
Click to collapse
thanks i think its the issue with crom unlock, but i see warning everywhere it will knockout knox! i was trying to have twrp without rooting or disable knox, but i guess i dont have choice with my model.