Hi, I am currently use SOKP (5.1.1) rom on my t mobile note 4. My baseband is still COD6 (I guess bootloader should be in the same version as baseband). My TWRP is still 2.8.0.X.
I want to switch to Touchwiz based custom rom. In the meanwhile, I think I need to update the baseband (bootloader and etc) and TWRP for a smooth experience.
Can anyone advise an approach to do it? I am thinking to flash the latest original N910TUVU2DOK2_N910TTMB2DOK2_TMB.zip rom via odin. Can anyone post a link to the instruction? I want to make sure what I do via odin is correct.
I assume this flash will automatically update bootloader and baseband to the latest version. and I need to re-root and update TWRP per the instruction here before flash the TW based custom rom.
I figured out that I could just load the stock via odin and go from there. So far so good.
Related
Can someone please give me the link of a stock official kk 4.4.2 because i bricked my note 3 and i need i want yo restoret with sideload or i can install any rom from sideload to get it work? Help please
There isn't a full version just a ota
Sent from my SM-N900A using Tapatalk
What ROM version are you on? Unless you're on a intact NB4 ROM, you can't flash the NC2 update, it will fail the file checks.
If you're on MLG or one of the JB ROMs you can just flash back to one of those if your base installation is damaged/corrupted. This is assuming your bootloader isn't A3. If it is, you can only flash the MLG ROM with the A3 bootloader, or have your phone completely restored by the Samsung people at Best Buy.
If your base installation is damaged/corrupted/etc... on bootloader A3 you will not be able to flash the update and you will need to either warranty the phone or go to Best Buy and have them do a full restore on the phone.
SpikeyPsyche said:
What ROM version are you on? Unless you're on a intact NB4 ROM, you can't flash the NC2 update, it will fail the file checks.
If you're on MLG or one of the JB ROMs you can just flash back to one of those if your base installation is damaged/corrupted. This is assuming your bootloader isn't A3. If it is, you can only flash the MLG ROM with the A3 bootloader, or have your phone completely restored by the Samsung people at Best Buy.
If your base installation is damaged/corrupted/etc... on bootloader A3 you will not be able to flash the update and you will need to either warranty the phone or go to Best Buy and have them do a full restore on the phone.
Click to expand...
Click to collapse
i bricked my phone so i want to install it via Download mode ... that why im downloading the n900AUCELG_OneClick to restoret i dont have an rom :S so i need to re intall the full system wa T_T any sugestion?
Hello,
I wanted to install a ROM 5.1.1
For that, I first wanted to upgrade my existing FW to last, ie the WW-11.4.1.29.
So I wanted to flash the ROM Stock Asus from my Recovery 6.0.5.0
But the install does not happen.
He said that the latter is intended for K000C, while I have a TF701T.
At a minimum, I do not want to flash the ROM.
Just have the latest firmware.
Currently, the bootloader tells me I am WW_epad-10.26.1.18-20131217
Thank you in advance for your assistance
Just flash this as long as you have the tf701 to update the boot loader and make sure you have the correct US or WW version... http://forum.xda-developers.com/tra...overy-kang-twrp-tf700t-2-8-x-xarea51-t3121989 scroll down to where you see FLASHABLE ZIPS INCLUDING LATEST BOOTLOADER FOR WW & US SKUs
Many Many thanks
Hi,
No OTA updates for me as my Z2 Pro is running some merchant version as I have multiple languages available.
With that in mind, do I need to update to latest ZUI software, or simply unblock bootloader, root and flash custom rom?
At the moment I am at 2.1.120 ST
Same here. That's international ROM, which does not support OTA. I believe I'm gonna flash latest ZUI using QFIL method (there's a thread "How to flash stock ROM") but there's not much info about this latest ZUI version.
Both of you are best served following any of the guides to flash the stock rom via QFIL. After that you're free to decide how to continue (OTA, Custom ROM, Custom Recovery...)
Thanks, will do.
By the way, I bought the device specifically to go straight to a custom ROM. I had a really easy time flashing the stock rom, updating through OTA (didn't even need VPN for some reason) and then unlocked bootloader, flashed TWRP and AEX. The whole setup works quite nicely.
And according to a number of threads the device should be close to unbrickable. But I haven't verified that myself
I am fairly new to using the Galaxy Note 3, but an experienced user and firm believer in flashing roms and gaining root access to our Android devices. I have tried multiple roms on my device, and with every single rom they fail to install. I get an error that says "E: Error executing updater binary in zip" I have tried reinstallimg, wiping the device, even formatting the system with no luck. Any answers are very much appreciated.
Btw, I know my bootloader is locked with the AT&T variant and am using the Safe Strap version 3.75 specifically for my model N900a on kitkat firmware NC2 if this helps any!
With a locked bootloader, only custom ROMs based off a stock Samsung rom can be flashed to the n900a.
I'm new, and not sure if this is the right place to comment haha
audit13 said:
With a locked bootloader, only custom ROMs based off a stock Samsung rom can be flashed to the n900a.
Click to expand...
Click to collapse
The rom I was trying to flash was supposed to be based off of Samsung's touchwiz, a full port from the g9200. I'm a little confused here, on the download page here in XDA forums, the instructions and download page said it was specifically for my model and that it would work. The rom's name is Aurora Note 3 Full G9200 Port v3
Often, an updater script error during the flash process indicates that the phone's minimum requirements are not met for the ROM to install.
Is this the ROM: https://forum.xda-developers.com/note-3-att/development/10-11-15-t3223180 ?
This appears to be a Lollipop ROM as indicated in the first post which means the phone probably needs to be running a Lollipop bootloader and modem.
audit13 said:
Often, an updater script error during the flash process indicates that the phone's minimum requirements are not met for the ROM to install.
Is this the ROM: https://forum.xda-developers.com/note-3-att/development/10-11-15-t3223180 ?
This appears to be a Lollipop ROM as indicated in the first post which means the phone probably needs to be running a Lollipop bootloader and modem.
Click to expand...
Click to collapse
This is a screen shot of the directions I was following in order to be able to update to the rooted lollipop ROM.
Thread closed, you must use instructions (posted here on forums) to update to rooted lollipop for you to be able to flash custom roms for your N900a device. You must root lollipop, with root access you flash NC2 flasher apk to flash the kernel needed to use safestrap after that boot into safestrap and then flash the rom of your choice and flash the OC1 kernel so your device will boot back on. And there you have it!
guys need a question. i have already upgraded my phone to this firmware (N9208XXS4CRA1). then i intstall twrp and flash custom rom. now i want to go back to stock but my back up odin flashable firmware is
N9208XXS3CQJ1_N9208OLB3CQJ1_N9208XXU3CQG2_HOME.tar. now i cant flash it coz of error. do i neeed to download the latest firmware or there is something wrong with my phone. coz i cant restore my twrp back up if i flash twrp again. hope someone can help.
pattriccio said:
guys need a question. i have already upgraded my phone to this firmware (N9208XXS4CRA1). then i intstall twrp and flash custom rom. now i want to go back to stock but my back up odin flashable firmware is
N9208XXS3CQJ1_N9208OLB3CQJ1_N9208XXU3CQG2_HOME.tar. now i cant flash it coz of error. do i neeed to download the latest firmware or there is something wrong with my phone. coz i cant restore my twrp back up if i flash twrp again. hope someone can help.
Click to expand...
Click to collapse
You cant flash a firmware with a lower bootloader number. The fifth digit from the right is the bl version. You are trying to flash a firmware with bl version 3 over you're current version 4 so just flash a firmware with version 4 and you should be good.
bsharp8 said:
You cant flash a firmware with a lower bootloader number. The fifth digit from the right is the bl version. You are trying to flash a firmware with bl version 3 over you're current version 4 so just flash a firmware with version 4 and you should be good.
Click to expand...
Click to collapse
thanks mate. problem is every firmware im downloading right now always corrupt. and very slow. but thanks anyway for the help and knowledge.
thanks mate i changed pc and got a successful download.
No problem glad you got it worked out.
Never ever try to downgrade your bootloader to go to an older rom by the way. I tried it and had to replace my phones motherboard.just fyi