I realized that the TMS5 thread is probably not the most appropriate for discussions on this so here's a dedicated thread for it.
A number of roms from other variants can work on our model with minimal modification, so report here your successes and whatnot, what you needed to do and support for fellow users. Me and the other users in this thread are in no way responsible for any bricks that may or may not occur as a result of poking around with this, in general the roms in this section work fine and you should use those. Also, it should go without saying, but please DON'T POST ANY PERSONAL BUILDS OF ROMS OR SIMILAR WITHOUT THE ROM AUTHOR'S PERMISSION FIRST.
General tutorial for other model roms
Requirements for possible compatibility:
☑Based on touchwiz
☑Firmware base is 5.0 VERY IMPORTANT, CANNOT BE 5.0.1 OR 5.1.1, MUST BE 5.0
☑Doesn't heavily integrate a custom kernel or anything similar such as a built in recovery flasher(not typical but worth mentioning)
Flashing steps
In most cases use flashfire, it has aroma support. Edit the zip and remove the kernel if any, and remove the part of the script that flashes it, otherwise get the oc4 kernel.
Flash the ROM as you normally would for any other ROM on our phones, if you don't remove the kernel make sure to Odin it right after you flash.
Currently confirmed working roms
Phoenix-v11
Alliance
Omega
XtreStoListe
OptimalROM
Roms that should work in theory(untested)
The galaxy project
hook it up!!!!!!!! thanks
Heres a benchmark from antutu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from my sm-g870a running pheonix rom for g900f
---------- Post added at 06:17 PM ---------- Previous post was at 06:17 PM ----------
Id like to see a few others. This rom is super stable and snappy
sent from my sm-g870a running pheonix rom for g900f
I got Phoenix working here, working pretty good but I'm acrewing around too much for a decent benchmark on the battery, but so far so good for everything else.
Sent from my SM-G900A using Tapatalk
@Rakuu i believe you can flash it and add the g870a also in the title. As per my phone lol. Thumbs up.
sent from my sm-g870a running pheonix rom for g900f
Rakuu I couldn't get the dark theme to download I read over on Tms5 you did something to get. I hate all this white. Lol
Sent from my SM-G900F using XDA-Developers mobile app
Inspired I will PM you. On a side note, anyone else notice screenshots uploaded with tapatalk get really crappy quality?
Sent from my SM-G900A using XDA-Developers mobile app
I don't know looks OK to me. BTW Rakuu link sent me to a lame app download. Got your systemui though thanks. I'll try link again when I'm at home pc.
Sent from my SM-G900A using XDA-Developers mobile app
Rakuu never mind on last pm used a different browser and got the download. Will replace the systemui with yours and flash than enjoy the darkness. Thanks
Sent from my SM-G900A using XDA-Developers mobile app
Would there be any sort of issue using Safestrap vs. Flashfire to install Phoenix? I know that Alliance didn't play well with SS, but most others I've flashed (TMS5, Twi5ted) did fine. Thanks.
sbs8331 said:
Would there be any sort of issue using Safestrap vs. Flashfire to install Phoenix? I know that Alliance didn't play well with SS, but most others I've flashed (TMS5, Twi5ted) did fine. Thanks.
Click to expand...
Click to collapse
It uses aroma, if you want to flash an aroma ROM you need to edit the zip to make it aromaless, or just use flashfire which has aroma support.
Sent from my SM-G900A using Tapatalk
Rakuu said:
It uses aroma, if you want to flash an aroma ROM you need to edit the zip to make it aromaless, or just use flashfire which has aroma support.
Click to expand...
Click to collapse
Flashfire worked somewhat. It did the wipe (though aroma does that as well) and flashed the ROM, but, for some reason, it failed to flash the OC4 kernel afterwards, though I had specified it to be flashed after the ROM. I was able to Odin the kernel, and Phoenix seems to be booting okay. I'll update if I run into issues. Thanks.
sbs8331 said:
Flashfire worked somewhat. It did the wipe (though aroma does that as well) and flashed the ROM, but, for some reason, it failed to flash the OC4 kernel afterwards, though I had specified it to be flashed after the ROM. I was able to Odin the kernel, and Phoenix seems to be booting okay. I'll update if I run into issues. Thanks.
Click to expand...
Click to collapse
I personally just took the kernel out of the zip, can't distribute the zip though as per ROM devs request.
Edit: @sbs8331 Did you flash the actual Odin kernel in FF or the kernel zip?
Sent from my SM-G900A using Tapatalk
Rakuu said:
I personally just took the kernel out of the zip, can't distribute the zip though as per ROM devs request.
Edit: @sbs8331 Did you flash the actual Odin kernel in FF or the kernel zip?
Click to expand...
Click to collapse
I didn't know how to take the kernel out of the zip. I used Odin to flash G900A_OC4_Stock_Kernel.tar.md5.
sbs8331 said:
I didn't know how to take the kernel out of the zip. I used Odin to flash G900A_OC4_Stock_Kernel.tar.md5.
Click to expand...
Click to collapse
Odining is probably the preferred method for most unless it does more than the kernel.
Sent from my Galaxy S5 using XDA Labs
Rakuu said:
Odining is probably the preferred method for most unless it does more than the kernel.
Click to expand...
Click to collapse
My heart jumped into my throat for a minute when I got the kernal error. Fortunately, Odin cleaned it up quickly. The ROM seems to be working well so far. I'll be interested to gauge the battery life, since it has seemed to drain more quickly lately, and I haven't been able to pin down why. (Maybe the battery itself.) Functionality seems really good. No surprise, but the ROM lists my device's model number at SM-G900F. (Twi5ted, which was based on T-Mobile, had listed it as 900T.)
Other G900A users might want to note my experience with flashing it, i.e. that the OC4 kernel didn't flash but required separate Odin install.
Also, I flashed the TMS5 extra toggles in order to get the flashlight on notification panel pull down, as well as the zip to install the Chome home button per T-Mobile, which I've found to be very handy.
Thanks for finding this and giving us locked bootloader users at lease one more ROM to play around with. :good:
sbs8331 said:
My heart jumped into my throat for a minute when I got the kernal error. Fortunately, Odin cleaned it up quickly. The ROM seems to be working well so far. I'll be interested to gauge the battery life, since it has seemed to drain more quickly lately, and I haven't been able to pin down why. (Maybe the battery itself.) Functionality seems really good. No surprise, but the ROM lists my device's model number at SM-G900F. (Twi5ted, which was based on T-Mobile, had listed it as 900T.)
Other G900A users might want to note my experience with flashing it, i.e. that the OC4 kernel didn't flash but required separate Odin install.
Also, I flashed the TMS5 extra toggles in order to get the flashlight on notification panel pull down, as well as the zip to install the Chome home button per T-Mobile, which I've found to be very handy.
Thanks for finding this and giving us locked bootloader users at lease one more ROM to play around with. :good:
Click to expand...
Click to collapse
In the ROM settings there's a thing that adds the extra goggles, no zip needed
It gets the model from the build.prop, you can go in there and change it if it bothers you
Sent from my Galaxy S5 using XDA Labs
sbs8331 said:
My heart jumped into my throat for a minute when I got the kernal error. Fortunately, Odin cleaned it up quickly. The ROM seems to be working well so far. I'll be interested to gauge the battery life, since it has seemed to drain more quickly lately, and I haven't been able to pin down why. (Maybe the battery itself.) Functionality seems really good. No surprise, but the ROM lists my device's model number at SM-G900F. (Twi5ted, which was based on T-Mobile, had listed it as 900T.)
Other G900A users might want to note my experience with flashing it, i.e. that the OC4 kernel didn't flash but required separate Odin install.
Also, I flashed the TMS5 extra toggles in order to get the flashlight on notification panel pull down, as well as the zip to install the Chome home button per T-Mobile, which I've found to be very handy.
Thanks for finding this and giving us locked bootloader users at lease one more ROM to play around with. :good:
Click to expand...
Click to collapse
In the ROM settings there's a thing that adds the extra goggles, no zip needed
It gets the model from the build.prop, you can go in there and change it if it bothers you
Sent from my Galaxy S5 using XDA Labs
Rakuu said:
In the ROM settings there's a thing that adds the extra goggles, no zip needed
It gets the model from the build.prop, you can go in there and change it if it bothers you.
Click to expand...
Click to collapse
No, the model # is no big deal. I didn't see the extra toggles. However, I have the "Cover Warnings" disabled but I'm still getting the message about the USB port cover, which, on my device, broke off a couple of months ago. I don't miss the cover.
Related
Incredilicious Final Rev 12/01/11 2.3.4 (4.08.605.2)
This is a Rom I've been working on for over a month now, and has been tested extensively on six Dincs. It's my own personal ROM (for my personal tastes) based on a stock rooted 2.3.4 (4.08.605.2) base (stock kernel) for those of you that choose to stay close to stock. It's not for everyone, I just thought I'd share it for those looking for a Stock Based ROM.
Special thanks to Wildstang83 for the stock ROM as my base
Special thanks to 00McD00 for the quick settings tab, and some parts of the systemui.apk, and frameworkres.apk, and for his lockscreen (modified 3d for this ROM).
Special thanks to Devildog8791 for the Black Dialer
As you can see from the "Running Services" screen shot, all the VZW [email protected] has been ripped out, along with a few other unnecessary services that hinder battery life and speed.
File Explorer has been added so you don't have to hit the Market right off the install to get to your files.
Updated Market to ICS version. Updated Maps, GMail, VoiceSearch, SuperUser, Flash Player 11, etc. (nothing should have to be updated after install). ClockQ has been added for those that don't like that big azzed Weather clock (like myself), go into Apps, configure your clock, and add it as a widget to your home screen.
Battery indicator with 1% increments, full color signal strength meter, etc.
Quicksettings in the notification tab.
Flyaway transitions have been added to most transitions in the ROM.
Install Instructions
Main
Wipe Cache Partition
Wipe Data/Factory Reset
Advanced
Wipe Dalvik Cache
Wipe Battery Stats
Mounts and Storages
Format Boot
Format System
Format Datadata
Format Data
Format Cache
Install Rom & Reboot!
What Works:
Everything (provided you follow install instructions)
What Doesn't Work:
Nothing!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Normal disclaimer about how flashing a rom can be dangerous for your phone, blah, blah, blah. Please always perform a backup before flashing this ROM. If you some how screw the pooch, consider it "Pilot Error", and I am not responsible.
Download ROM Here:
There will be no more revisions to this ROM (God knows it's been through enough revisions already).
If you want to modify icons, battery meter, etc. Hit the UOT kitchen HERE!
If you plan on using a different kernel, do so at your own risk. I have no idea who's kernel works with this ROM, as I didn't develop the other kernels. This ROM uses the stock 2.6.35.13-g03546aa kernel associated with GB 2.3.4. Please ask that question in the kernel thread
Final disclaimer:
If you're not secure enough with your own sexuality to have some purple highlights here and there, then by all means stay away from this ROM!
Original Wallpaper, and the "Stocks" app link directly below: ("Stocks" app is a flashable CWM zip file).
Five CWM flashable Screen Locks all in one pack (including Stock_Incredulicious_lockscreen.zip which will get you back to the original lock screen that came with this ROM).
DOWNLOAD SCREEN LOCK MODS HERE
Mods Include (left to right, top to bottom):
Sun and Clouds
Light Shiny Pine
Diamond Plate
Blue Snake Skin
Tiger Skin
Back to Stock (pictured in original ROM screen shots)
Lock Screen Mod Install Instructions
Boot into CWM
Wipe Cache
Wipe Dalvik Cache
Install Lock Screen Mod from Zip File
Reboot (first boot will take longer as caches have been cleared)
Hi,guy.Nice to meet you again!
I have Iconia A500 too,
---------- Post added at 09:21 AM ---------- Previous post was at 09:16 AM ----------
Acer Iconia A500
KJY_2010_Honeylicious_REV_8_F??What is this?
I have not seen any Threads about this!
mumazz said:
Hi,guy.Nice to meet you again!
I have Iconia A500 too,
---------- Post added at 09:21 AM ---------- Previous post was at 09:16 AM ----------
Acer Iconia A500
KJY_2010_Honeylicious_REV_8_F??What is this?
I have not seen any Threads about this!
Click to expand...
Click to collapse
You won't see a thread on it either. Too many kids in the A500 forum that bork their tabs far too easily. Not into babysitting a thread for kids
Ok, im game, ill give it a go. Looks pretty nice.
Sent from my ADR6300 using XDA App
Gonna flash this one in a few minutes! Looks like a good one for sure!
Been running this for a couple hours now - seems nice.
But as always - there's one in the bunch...(me)
I'd like to locate the stock incredible "stocks" apk
Thanks !
danielzink said:
Been running this for a couple hours now - seems nice.
But as always - there's one in the bunch...(me)
I'd like to locate the stock incredible "stocks" apk
Thanks !
Click to expand...
Click to collapse
No problem bro. I'm out of the house right now, and won't be home until about 3am EST. I'll post it up in the thread when I get home
Runs really fast. Cool transitions, gunna run it a few days n check it out. Great work dude.
Sent from my ADR6300 using XDA App
Look! Up in the sky! It's a bird; it's a plane; it's a ...
^^
+1
I have flashed about 20 ROMs and, I have to say, yours is a beauty. I love all the color, the fly-aways and how fast it is. Do you live in an Ice Fortress by any chance?
I am thinking of trying tiny's 12/01/11 kernel but I definitely don't want to "hurt" your ROM at all.
In any case, thanks for a terrific ROM!
Tinys newest makes it smokin fast, but needs the power menu, the one from the other roms will not work, unless i did something wrong. I really like having multiple boot options, and this rom is lacking that. Other than that, it may be the fastest rom ive ever used, and i didnt even oc it. Helluva rom.
Sent from my ADR6300 using XDA App
danielzink said:
Been running this for a couple hours now - seems nice.
But as always - there's one in the bunch...(me)
I'd like to locate the stock incredible "stocks" apk
Thanks !
Click to expand...
Click to collapse
Here ya go bro. Flash this file in CWM and you should be good to go!
donnyp1 said:
Runs really fast. Cool transitions, gunna run it a few days n check it out. Great work dude.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
ptgay49 said:
^^
+1
I have flashed about 20 ROMs and, I have to say, yours is a beauty. I love all the color, the fly-aways and how fast it is. Do you live in an Ice Fortress by any chance?
I am thinking of trying tiny's 12/01/11 kernel but I definitely don't want to "hurt" your ROM at all.
In any case, thanks for a terrific ROM!
Click to expand...
Click to collapse
donnyp1 said:
Tinys newest makes it smokin fast, but needs the power menu, the one from the other roms will not work, unless i did something wrong. I really like having multiple boot options, and this rom is lacking that. Other than that, it may be the fastest rom ive ever used, and i didnt even oc it. Helluva rom.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Thanks guys. Glad to know someone is getting some use out of it!
Morning,
I was just wondering if you knew why I can't get the image to load past the HTC Incredible screen. I can load SR4.2, GingerSense and a multitude of others, however this one seems to just hang.
Running fast for me as well! Excellent Rom! I may try Tiny's latest, but I don't really want to mess with it. lol!
accord1 said:
Running fast for me as well! Excellent Rom! I may try Tiny's latest, but I don't really want to mess with it. lol!
Click to expand...
Click to collapse
Just make a back up as it is right now, then try tiny's kernel. Backups will save the kernel you're using, so you can always revert back.
RMarkwald said:
Just make a back up as it is right now, then try tiny's kernel. Backups will save the kernel you're using, so you can always revert back.
Click to expand...
Click to collapse
Just did this! Flashing now! Are you running an overclock app like setcpu with it or just the kernel itself? If you are running an app I have always wondered about settings and stuff (what to set it at). Any insight or tips?
LlirasChosen said:
Morning,
I was just wondering if you knew why I can't get the image to load past the HTC Incredible screen. I can load SR4.2, GingerSense and a multitude of others, however this one seems to just hang.
Click to expand...
Click to collapse
This sounds like a wiping issue.
1) Reboot into CWM
2) Choose wipe data/factory reset
3) Go into mounts and storage and format boot, then format system
4) Flash rom
jermaine151 said:
This sounds like a wiping issue.
1) Reboot into CWM
2) Choose wipe data/factory reset
3) Go into mounts and storage and format boot, then format system
4) Flash rom
Click to expand...
Click to collapse
Thanks Jermaine. I posted the complete install instructions in the OP, which included the full wipe and format.
Unfortunately not everyone will follow them
LlirasChosen said:
Morning,
I was just wondering if you knew why I can't get the image to load past the HTC Incredible screen. I can load SR4.2, GingerSense and a multitude of others, however this one seems to just hang.
Click to expand...
Click to collapse
Full instructions for wiping, formatting, and installing are in the OP. if you follow them you'll not experience your problem
kjy2010 said:
Thanks Jermaine. I posted the complete install instructions in the OP, which included the full wipe and format.
Unfortunately not everyone will follow them
Click to expand...
Click to collapse
You're welcome! This rom looks great. It's great to see more choices.
Team Rage Presents:
RAGING BIONIC By BDAZZG1
The Stock Based ROM with all the speed & features you love!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What it's Got:
Improved GPS Lock and Accuracy
Fully Deodexed Thanks jp1044
Super Debloated
Full init.d support
LMT Launcher (PIE Controls) Thanks noname81
Battery Tweaks
Greenify App
Koush's Superuser App Thanks Koushik Dutta
1% Battery Mod Thanks Dluke
Fully Customizable Notification Toggles
Gapps baked in
Apex Launcher
Moto HD Launcher w/ Circles Widget
Ad Blocker
Apollo Music Player
Extreme build.prop tweaks
Increased Dalvik VM Heap Size
Disabled Kernel Logging for speed
Governors & Schedulers Baked In
Optional Overclock Baked In
Loopy Smoothness Tweak
Moto Camera & Gallery
Lots of Performance Tweaks
Many Essential Root Apps Preinstalled
Changelog:
v0.1.8 7/21/2013
Initial Release
v0.1.9 7/22/2013
Fixed Non-Working Home Button Bug
Updated build.prop
v0.2 7/24/2013
Fixed Magnetic Sensor (Compass)
Cleaned up system files
v1.0 8/3/2013
THIS IS A MAJOR UPDATE. YOU MUST WIPE DATA!!
IF YOU DON'T WIPE, DON'T REPORT BUGS!!
Fixed Speakerphone Bug
Baked in entitlement hack
More build.prop tweaks for battery life and speed
Added OTA updater thanks eye__dea for all your help!!
New custom wallpapers
Cleaned up System
Added Optional OG Battery Mod
v1.1 8/12/2013
Moved some apps to settings menu
Removed 4.2.2 Camera
Added extended power menu flashable.zip to Raging Zips Folder
How to Install Raging Bionic:
YOU MUST BE ON STOCK 98.72.22 JB KERNEL
Boot into Safestrap v3.11
Select any Slot
Wipe Data / Factory Reset
Wipe cache and dalvik cache
Wipe System
Install ragingbionic.zip
Reboot System
Initial boot takes about 5 minutes...Dont Panic
Reboot
Profit
Enabling Overclock:
The OC script is in /system/etc/init.d The scripts are are commented out to prevent initial boot issues. I've had Bionics that crash at 1250mhz, while others fly at 1350+. Use tweakerz to "test the waters" then go to the OC script, uncomment the scripts (delete the # in front of the script), and modify the scripts to suit your desired speed and voltages. For those of you on a 4 slot, leave the last line commented out.
Reboot.
Profit.
Remember, once you uncomment the scripts, OC will stick. If you push it too far you will find yourself editing with adb through recovery or reflashing your bootlooping soft brick. Have fun guys and gals
If you're not comfortable working with the scripts, you can always just apply settings in tweakerz. This, however, will not survive a reboot.
I, Team Rage, XDA, nor anyone else will be responsible for what you do to your phone! If you do this right it should work well. If not...well...that's what we're here for. Remember, we all do this for fun and have real lives too. If you find any bugs, please be sure you followed the INSTALL INSTRUCTIONS exactly before reporting. This ROM is designed for SAFESTRAP 3.11 ONLY. Flash other methods at your own risk!!
Downloads:
<MODERATOR EDITED> Off-site downloads are permitted if the site is non-commercial and does not require registration.
SafeStrap 3.11 Thanks Hashcode
Credits:
Special thanks to my Friends at Team Rage for jumpstarting my Dev Skills...
BDH, Gerland The Oracle, usmcamgrimm, & jl90
Hashcode
Dhacker
jp1044
noname81
Koushik Dutta
Dluke
P3 Droid & Team Black Hat
Nitroglycerine33
eye__dea
Markus McNugen
If I've forgotten anyone PLEASE say something so I can add you to my Credits! I greatly appreciate everybody's hard work and we all deserve credit for what we've done!
If you like my work and would just like to show your appreciation, please click the "Like This" button!!!!
This looks promising, It's got some features I'd love to see added to the official CM10, though. Overclock and PieControls are what I'm most interested in, but overall it looks good. I'm waiting for a CM10 themed Stock rom, though.
jrk190 said:
This looks promising, It's got some features I'd love to see added to the official CM10, though. Overclock and PieControls are what I'm most interested in, but overall it looks good. I'm waiting for a CM10 themed Stock rom, though.
Click to expand...
Click to collapse
I've got some really good themers on my team. I'll talk to them asnd see what they can do!
Awesome! I took a go at it, but I never got it to work. I'd switch to this in an instant if it looked like stock android. Either that, or a ported AOSP lockscreen and launcher would be nice. I've played around, but got nowhere, just a softbrick. It's a good thing I learned ADB when I did, or I'd be in trouble.
jrk190 said:
Awesome! I took a go at it, but I never got it to work. I'd switch to this in an instant if it looked like stock android. Either that, or a ported AOSP lockscreen and launcher would be nice. I've played around, but got nowhere, just a softbrick. It's a good thing I learned ADB when I did, or I'd be in trouble.
Click to expand...
Click to collapse
Using Safestrap 3.11 right? This is a SS only ROM. I've got over 100 downloads and no reports of soft brick. Please let me know exactly what you did so I can help
Sent from my Raged Out RAZR MAXX HD
Great ROM gave it a try out on my Bionic, OC works fine I can push my Bionic to 1.45ghz before to gets unstable, but that was using dtrail's overclocked jbx kernel in the razr forms, the only thing that I miss from AOSP 4.1.2 is the default lockscreen with its cool music controls if that could be included it would be awesome, however I am ordering my S4 tonight but will keep my Bionic around and this or CM 10.1 will probably drive it
can this rom add custom actions when clicking on the time in notifications
Oh, no, It works now. I couldn't find a link to SafeStrap before, but after ton of searching, I fixed it. I'm running 4.2.2 now. Anyway, yeah, if you could get a rom themed like AOSP or CyanogenMod, I'd flash it in a heartbeat
jrk190 said:
Oh, no, It works now. I couldn't find a link to SafeStrap before, but after ton of searching, I fixed it. I'm running 4.2.2 now. Anyway, yeah, if you could get a rom themed like AOSP or CyanogenMod, I'd flash it in a heartbeat
Click to expand...
Click to collapse
We are working on a CM theme. There is a link to Safe Strap in the OP lol
Sent from my Raged Out RAZR MAXX HD
I know, haha. I got my Bionic yesterday, and boy did I screw up. Before I had taken it to Verizon, I installed the old version of Bootstrap, which would bork the system. I installed it, then rebooted, and got the Encryption Unsucessful error. I temp fixed it from adb, and took it to the store. The guy at the desk turned it off, put in the sim, and looked confused as could be when he saw the encryption error. He looked at me and was kinda like, "Um.... Sir.... Your phone..." And I just took it and walked out. Anyway, fixed it after an hour of googling, and installed CM10 in the first slot. Back on topic, can I flash this ROM over stock?
jrk190 said:
Back on topic, can I flash this ROM over stock?
Click to expand...
Click to collapse
In theory it should work, although not tested. If you want to try make sure you have the FXZ handy and familiarize yourself with the JB root method just in case something goes sideways.
Sent from my Raged Out RAZR MAXX HD
I already have, haha. That's how I got outta softbrick yesterday. As soon as you get up a CM10 Themed version, I'll flash it. I'm using CM as a daily right now, and I'm using stock for HDMI.
jrk190 said:
I know, haha. I got my Bionic yesterday, and boy did I screw up. Before I had taken it to Verizon, I installed the old version of Bootstrap, which would bork the system. I installed it, then rebooted, and got the Encryption Unsucessful error. I temp fixed it from adb, and took it to the store. The guy at the desk turned it off, put in the sim, and looked confused as could be when he saw the encryption error. He looked at me and was kinda like, "Um.... Sir.... Your phone..." And I just took it and walked out. Anyway, fixed it after an hour of googling, and installed CM10 in the first slot. Back on topic, can I flash this ROM over stock?
Click to expand...
Click to collapse
Best way is to use safe strap and partition ROM slots. Most runs on slot runs. You don't wanna flash your stock ROM.
Sent from my Eclipsed Bionic(5.0 Build-3)
Any progress on the stock JB theme?
Sent from my XT875 using xda app-developers app
urbanski89 said:
Best way is to use safe strap and partition ROM slots. Most runs on slot runs. You don't wanna flash your stock ROM.
Sent from my Eclipsed Bionic(5.0 Build-3)
Click to expand...
Click to collapse
I loaded this ROM, and while I do think it performs great, I must report that Photosphere technically works although it does not perform as Photosphere should at all. I could never get it to create anything. Is this something everyone is experiencing, or something secluded to just me?
For the developer, my loading of the ROM included no extra apps outside of what is already baked in. I also made no configuration changes, simply loaded it and tried out Photosphere.
I want to check this ROM out, but I can't get past the setup screen, it keeps telling me to wait. I'm on Page Plus, and I believe that is causing it not to activate. Is there a way to deactivate or remove the initial setup screen?
kristoff123 said:
I want to check this ROM out, but I can't get past the setup screen, it keeps telling me to wait. I'm on Page Plus, and I believe that is causing it not to activate. Is there a way to deactivate or remove the initial setup screen?
Click to expand...
Click to collapse
Delete the ROM Slot you're using and recreate it. You've probably got some old data hanging around. Others have experienced this and that has been a 100% golden fix
Sent from my Raged Out RAZR MAXX HD
As soon as there's an AOSP themed one, I'm flashing. I just found a bug in CM10, and can't record using the Front Facing Camera ( which I need when recording songs)
Sent from my XT875 using xda app-developers app
If nobody has tested this in their stock slots... I'm willing to test it... For science. If all else fails, I'll RSD, re-safestrap, and restore CM10. I'm just waiting for a AOSP themed version though .-. I'm OCD about having that look, for some reason. Hopefully it'll work on Stock slot, though. It should.
jrk190 said:
If nobody has tested this in their stock slots... I'm willing to test it... For science. If all else fails, I'll RSD, re-safestrap, and restore CM10. I'm just waiting for a AOSP themed version though .-. I'm OCD about having that look, for some reason. Hopefully it'll work on Stock slot, though. It should.
Click to expand...
Click to collapse
I don't have time now but in the past I'm pretty sure I nandroided my unsafe and messed with it and then wiped it and restored the image fine so I'd imagine it would go fine. Before Rage came along I restored that same image to Slot4 and ran a safe stock so I could more comfortably poke it and if it got pisses just wipe S4.
Sent from my Carbon Bionic
Simple, Stable, Smooth...
I am not a developer, I have learnt (and am still learning) many things from the immensely talented developers on this Forum.
This Rom has been created with the thought that there are many people who wish to continue with Samsung Stock Rom to give them a hassle-free use of their Smartphone, yet they need their Rom to be bloatfree, efficient and Smooth.
This ROM is rooted and odexed for my daily use. Will try to keep the version updated as and when a new stock firmware (with higher/better changelog) is released for the Galaxy Tab 3 (T211) version.
Please do not expect me to customise this ROM any more than what it is. As I said I am not a Developer. Thanks for Understanding.
Only for T211
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards. YOU are choosing to make these modifications on your phone and you are solely responsible for your actions.
Enjoy/Share the Rom and hit Thanks, if you like it.
Base Firmware (v4)
Model: SM-T211
Model name: GALAXY Tab3 7.0 3G
Country: Spain
Version: Android 4.4.2
Changelist: 3143050
Build date: Fri, 31 Oct 2014 09:20:17 +0000
Product Code: PHE
PDA: T211XXBNJ3
CSC: T211OXXBNK1
MODEM: T211XXBNJ3
Features
•Odexed
•Zipaligned
•Rooted (Supersu 2.14)
•BusyBox
•Init.d scripts support
•Debloated
Changelog
•Updated Firmware
•Exchange support for Gmail included
•Sqlite tweaks
•Build Prop tweaks
Download link:
Zephyr_Tab_v4.zip
Size: 491.5MB
https://www.androidfilehost.com/?fid=95784891001614435
md5sum : 8fb4c818e8819543c5f93dc4f92d06f5
Installation Instructions:
- Copy the Zip to your Phone Memory/Memory card (Check md5 checksum)
- Use Latest recovery – CWM or Philz
- Backup your existing rom
- Format System
- Wipe Data
- Wipe Cache
- Wipe Dalvik Cache
- Install Rom
- Reboot
- Enjoy
Note :
Clean Install is highly recommended
Please take an EFS backup
Inspiration &Thanks to:
@sammobile @dsixda
@Yank555
@sotmax
@zoot1 @Lord Boeffla @Chainfire
@temasek @rovo89 @Perka @JustArchi (for his amazing ArchiKitchen) @edgarf28
And to all others who have helped me along the way...
reserved
One More
One More
Click to expand...
Click to collapse
@manojpy sir may i know if there are any bugs in your rom like sim card not being detected or something like camera error?
sorry to ask this before flashing since my son is the one which is going to use it....
Warrenforfree said:
@manojpy sir may i know if there are any bugs in your rom like sim card not being detected or something like camera error?
sorry to ask this before flashing since my son is the one which is going to use it....
Click to expand...
Click to collapse
Have had no issues on my tab as I have not deleted any important programs. This is completely stock rom. Why don't you backup your existing rom through recovery and try it. I am sure your son will love it. Let me know how it goes[emoji6]
Zephyr Lite v 1.1, G900H
@manojpy
Hi, I've a question:
after installing this ROM (4.4.2) it is still possible to come back to a Jelly Bean ROM (4.1.2)?
Thanks
plauto said:
@manojpy
Hi, I've a question:
after installing this ROM (4.4.2) it is still possible to come back to a Jelly Bean ROM (4.1.2)?
Thanks
Click to expand...
Click to collapse
Backup your existing rom. Try this one. I don't think you will go back to JB. And I see no reason why you can't go back to JB either. Worst case scenario you will have to flash stock firmware using odin. I have not tried going back and am still waiting for feedback from you guys.
Zephyr Lite v 1.1, G900H
installation aborted..error ...(status7)
Sent from my SM-T211 using XDA Free mobile app
safeerxs said:
installation aborted..error ...(status7)
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
R u using the latest recovery. Which one and version? Try TWRP 2.7.1.0 and let me know.
Edit: Just tried with latest Philz 6.44.9 without any issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-T211 using XDA Free mobile app[/QUOTE]
Zephyr Lite v 1.1, G900H
I used philz_touch_6.41.6..
Sent from my SM-T211 using XDA Free mobile app
safeerxs said:
I used philz_touch_6.41.6..
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Please use the latest 6.44.9 and report. Thanks
Sent from my SM-G900H using Tapatalk
Tried 6.44.9 ..this time the installation completed but very quickly..and after reboot, no samsung logo, only a black screen..
Sent from my SM-T211 using XDA Free mobile app
safeerxs said:
Tried 6.44.9 ..this time the installation completed but very quickly..and after reboot, no samsung logo, only a black screen..
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
I can confirm that, it is VERY buggy.
After you start the tablet, wait for a couple of sec, you'd be greeted by nothing but a black screen.
You could tap the power on button twice to get it to work, but you'd only see the status bar, nothing else.
Sometimes tapping the back button and menu button randomly could get the Samsung setup wizard out, but even the wizard appears to be buggy.
First being during the Wi-Fi setup, when you're prompted to type in the Wi-Fi password, the keyboard would pop-up for a brief second and then go off again, making it impossible to type in anything.
Second is even if you skip all those, alright, the system appears to be working, the system, mobile data, yeah, those are fine.
However, the glitchiness continues, the power menu sometimes appears to be invisible, some of the pop-up option menu appears to be invisible, installing a third-party keyboard the UI element does not work properly either.
Also, the tablet hung up after installing some APKs through ADB, the status bar became distorted, I suspect that to be a system UI issue too.
All in all, all the rendered UI element appears to be buggy. That's the only thing that needs to be fixed.
All in all..waiting for a bugless rom..thank you for the efforts..all the best for your future projects
Sent from my SM-T211 using XDA Free mobile app
safeerxs said:
All in all..waiting for a bugless rom..thank you for the efforts..all the best for your future projects
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Please check the md5 of your download. Have had no problems and no lagging whatsoever. Anyways had posted this rom thinking people will enjoy it. If there are any more people facing issues.Will withdraw it from the forum.
Sent from my SM-G900H using Tapatalk
Nope dude, everybody says that kk has many issues , battery drain, slow internet, etc..so i am sticking with stock jb till an update to 4.4.2,hoping samsung will fix those issues
Sent from my SM-T211 using XDA Free mobile app
safeerxs said:
Nope dude, everybody says that kk has many issues , battery drain, slow internet, etc..so i am sticking with stock jb till an update to 4.4.2,hoping samsung will fix those issues
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
samsung tab 3 7.0 will not be receiving kitkat from Samsung sorry
Some guy PMed me and he pretty much ran in to the same situation.
I can not post.. new user.. I signed in for report about this rom
I had exact the same isuues as you describing in your post about that ROM.
I used TWRP 2.7.1.0
MD5 is OK
Also tried to wipe all user data (internal storage) in second try , and using the setup file from ext SD.
Please share this info in my behalf
10'x
Click to expand...
Click to collapse
341464 said:
Some guy PMed me and he pretty much ran in to the same situation.
Click to expand...
Click to collapse
Ask him to pm me cos I don't believe you. Before your first post here, you had PMed me too. Have quoted it below. I am not holding you back to be with this rom. Maybe your tab is getting old and can't handle Kitkat.
341464 said:
manojpy said:
341464 said:
Well, since XDA is being a douche and not letting all people to reply on dev board, I can only report the bug here.
To me, the ROM was completely unusable, some UI elements aren't being rendered correctly.
For instance, keyboards aren't showing, sometimes the power menu won't show up, some option menus won't show up.
Most issues are related to the UI.
Click to expand...
Click to collapse
Thanks for your honest feedback. Please feel free to go back to stock rom or any other custom rom. Have a nice day.
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
By that I suggest that no fixes would be made? If so, well, back to being sad using crappy stock JB then. :<
Click to expand...
Click to collapse
341464 said:
Some guy PMed me and he pretty much ran in to the same situation.
Click to expand...
Click to collapse
Sent from my SM-G900H using Tapatalk
manojpy said:
Ask him to pm me cos I don't believe you. Before your first post here, you had PMed me too. Have quoted it below. I am not holding you back to be with this rom. Maybe your tab is getting old and can't handle Kitkat.
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Okay wow, you're really stubborn, here's a pic to prove it, why the heck would I want to lie about this?
http://puu.sh/b5mMN/62144fbbbd.png
And what do you mean "getting old"?
Everyone's device is the same, you know I wouldn't be mad if your statement was a little less ridiculous, say regional differences, obviously that still wouldn't be the case but it's a lot less ridiculous than "getting old".
FYI, my tab's mobo was replaced about a month ago.
The Sprint Galaxy S4 is now receiving official CM 12 builds. This thread is here for reference purposes only. No new unofficial builds will be made.
It seems that the CyanogenMod folks are kicking along pretty well getting Lollipop ready. I was finally able to get a bootable version of CyanogenMod 12 for our phone, the jfltespr. The jflte devices are being de-unified again.
I am building a rather "plain" version, which consists of all merged GitHub items, along with cherry picks that are required to build the ROM.
Credits
CyanogenMod
Disclaimer
This ROM is under development, and the file(s) I provide are a snapshot at a particular point in time. There are no guarantees that they will work. On the other hand, it's quite possible that the file(s) here may make your phone explode, make your boy/girlfriend leave for another country, cause you immense financial loss or other horrible things. I'm not responsible for any of it. I'm just giving you a file.
Installation Instructions
Do a nandroid! What happens when the ROM doesn't work??
Use TWRP! CWM has been mentioned to work as well, but I do not personally support it.
Factory Reset! (Wipe Cache/Dalvik/Data)
Install my ROM ZIP file!
Install gapps (PA has Lollipop gapps in ALPHA) (Slim has Lollipop gapps here)
Install SuperSU!
Current Build Info
CM GitHub as of 01/26/15 @ 11:05 AM EST
Cherry Pick: (#79041) - add ANT+ Wireless support
Kernel Source
This ROM is built from CyanogenMod sources. You may retrieve the kernel source here!
What Works / Doesn't
Working: Mobile Data
Working: WiFi - Some users have experienced issues having BT and WiFi on at the same time. One reported fix is to change WiFi to use the 5Ghz channel.
Working: GPS - Some SPH-L720T users have experienced non-functional GPS. I suggest flashing back to TouchWiz and acquiring a GPS lock with GPS Status & Toolbox. Once that happens, go right back to recovery and reflash CM12.
Working: Camera - You may have to exit and go back in before it starts working properly. Also, occasionally the camera will appear to take photos but freeze the preview window and not actually take the photo. Google Camera and other third party apps don't seem to have this problem.
Working: NFC
Somewhat Working: Bluetooth - Some users have experienced slow A2DP playback or issues connecting to devices.
Not Working: Any other potential CM bugs. After all, this is an early release and can be potentially quite buggy.
Not Tested: Anything not mentioned above.
Found Bugs
When plugged in for charging, if you power off the phone, it will reboot after a short period of time. The touchscreen will not be functional. If you hold down the power button to reboot, the phone will be fine.
When using the stock messaging app, SMS messages will show as failed -- but they do go through. I tested to another mobile user and a Google Voice number. MMS doesn't seem to show an error.
Excessive battery drain due to NfcNci.apk in /system/app (reported for the Int'l CM 12 build). You can delete the APK if you experience high battery use from "Miscellaneous". [Hopefully this is fixed in the 11/24 build. Please respond if you notice any improvement]
Location icon stays in the status bar. This happens even if location is turned off.
Home button does not wake device.
I will post new versions of the ROM when I get a chance. New versions will be compiled daily and put into my MEGA folder.
Versions
MEGA Link (all versions) - Updated when new versions are built!
MEGA Link (all versions) provided by bthorne79
Changelog / Screenshots
Changelog
2015-01-26
cm: Core A/V fixes
cm: Bluetooth fixes
cm: misc fixes
2015-01-21
jf: Selinux Updates
jf: Bluetooth (Toggle) Fixes
jf: Fix 'Error while searching for networks'
jf: Bluetooth / WiFi co-exist fix
jf: Bluetooth dropping out fix
cm: Core A/V fixes
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice! I'll give it a run and report back as soon as I can. Thanks for your work.
Awesome! It seems to be working out good for me so far. No crashes or anything. Been using it for the last few hours pretty constantly. I'll get some screenshots up in a bit.
-eldorado- said:
Nice! I'll give it a run and report back as soon as I can. Thanks for your work.
Click to expand...
Click to collapse
Sent from my SPH-L720 using Tapatalk
nivron said:
Awesome! It seems to be working out good for me so far. No crashes or anything. Been using it for the last few hours pretty constantly. I'll get some screenshots up in a bit.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
You mention using TWRP... I'm using ClockWorkMod... Is that bad?
This is awesome. I wasn't expecting a build for this for another couple weeks. Keep up the good work!
I haven't followed or used CWM or PhilZ recoveries in quite a while -- I can't confirm that CWM will or won't work. I posted what worked for me, and it's more of a "recommended" method since I know it worked. You can certainly try CWM. If it works, I'll throw CWM in the OP with TWRP!
agentfazexx said:
You mention using TWRP... I'm using ClockWorkMod... Is that bad?
Click to expand...
Click to collapse
Amazing! Booted right up! Good work!
Sent from my SPH-L720 using XDA Free mobile app
If you or anyone else gets it installed, feel free to let me know what works and doesn't, so I can track it in the OP and see if there may be some fixes I can do and submit. Some of the bugs are going to be fixed by the CM folks, but they're busy working on getting the Nexus devices flawless, methinks.
onitenki said:
This is awesome. I wasn't expecting a build for this for another couple weeks. Keep up the good work!
Click to expand...
Click to collapse
nivron said:
I haven't followed or used CWM or PhilZ recoveries in quite a while -- I can't confirm that CWM will or won't work. I posted what worked for me, and it's more of a "recommended" method since I know it worked. You can certainly try CWM. If it works, I'll throw CWM in the OP with TWRP!
Click to expand...
Click to collapse
I'll try it... Do I risk bricking if I use CWM instead of TWRP? Or just risk it not installing?
Well, I've never seen an actual "brick" by using the wrong recovery -- with the exception of the bad NAND in the old S2. If CWM doesn't work properly, you may have an incomplete/empty /system partition or other potential filesystem problems, which will not let your phone boot. If that's the case, you should be able to restore your nandroid with no issues. Flashing is always a risk unfortunately!
agentfazexx said:
I'll try it... Do I risk bricking if I use CWM instead of TWRP? Or just risk it not installing?
Click to expand...
Click to collapse
nivron said:
Well, I've never seen an actual "brick" by using the wrong recovery -- with the exception of the bad NAND in the old S2. If CWM doesn't work properly, you may have an incomplete/empty /system partition or other potential filesystem problems, which will not let your phone boot. If that's the case, you should be able to restore your nandroid with no issues. Flashing is always a risk unfortunately!
Click to expand...
Click to collapse
I need my phone for work I can't risk bricking... Anyone else wanna try CWM? lol
Agreed -- if you need your phone for work, I wouldn't recommend flashing experimental builds like this one. I'd feel bad if you install it and miss out on something at work. Maybe someone will cue in with any CWM experiences.
agentfazexx said:
I need my phone for work I can't risk bricking... Anyone else wanna try CWM? lol
Click to expand...
Click to collapse
AWESOME
I can say that this unofficial build looks awesome, i cant wait for the official one. Everything looks so cute . Nice job OP
agentfazexx said:
I need my phone for work I can't risk bricking... Anyone else wanna try CWM? lol
Click to expand...
Click to collapse
I just installed with Philz and everything seems to work okay. The only bugs I have seen so far is I had to toggle airplane mode to get LTE to kick in and I am unable to download an attachment from Gmail. I live on the edge Sprint service so I will see how roaming works this evening.
dyandell said:
I just installed with Philz and everything seems to work okay. The only bugs I have seen so far is I had to toggle airplane mode to get LTE to kick in and I am unable to download an attachment from Gmail. I live on the edge Sprint service so I will see how roaming works this evening.
Click to expand...
Click to collapse
Dumb question... What's Philz?
agentfazexx said:
Dumb question... What's Philz?
Click to expand...
Click to collapse
It's a souped up CWM Recovery.
dyandell said:
It's a souped up CWM Recovery.
Click to expand...
Click to collapse
So in theory CWM should work?
agentfazexx said:
So in theory CWM should work?
Click to expand...
Click to collapse
I wouldn't think twice about doing it but that is your call. If you are worried, why don't you just switch to TWRP? It is really easy to do.
dyandell said:
I wouldn't think twice about doing it but that is your call. If you are worried, why don't you just switch to TWRP? It is really easy to do.
Click to expand...
Click to collapse
Yeah it probably is. Do I just flash TWRP with Odin? Got a TWRP download link?
Also, if I make a backup in CWM, can I restore it in TWRP?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Candy5. Built straight from CyanogenMod source with commits from a variety of different Sources/ROMS. We wanted to give the users a fun, fully customizable ROM.We aim to add more features as this project progresses.
Check us out on the web @The-Candy-Shop
@matthew0776 @mar5hal @gimmeitorilltell @BMP7777 @CyberScopes @Cuzz1369 @rc420head @Flashalot @tr1gg3r84 @Venomtester @Darknites @Rapier @NexusPenguin @Alx31TLse @timmytim
Disclaimer: We here at The CandyShop are not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, backing up before flashing is always recommended.
Features
*Candy Interface
*Navi Bar Height...Candy Interface
*Battery Percent ...Candy Interface / Status Bar
*Recents Panel Options ...Candy Interface/Recents Panel
*Clock and Date Options...Candy Interface/Clock and Date
*Wake Options ...Display
* Rotation 360 degrees...Display
*Custom Notification Lights...Sounds&Notifications
*Lockscreen Notifications Per App...Sounds&Notifications/App notifications
*IME options from 4.4+ ...Language and input/advanced options
*Disable Ime selector (thanks cm)
* Visual improvements
*ALL of Cm's Latest Feature Additions*
CHANGELOG
Steps:
Download Candy5.zip
Download Gapps (optional)
Place Candy5.zip on phones memory or SD card
Boot into recovery (USE MY TWRP (ONLY) in second post or CWM if it's been updated)
FULL wipe! (Dalvik Cache, Cache, System, Factory Data Reset)
Flash Candy5.zip
Boot into system
Flash Gapps
Reboot and Enjoi
Candy5-QUINCYTMO
* Gapps
Or use 5.0.0 Gapps of choice. !!!!NOTE!!!! Some are having issues with the playstore NOT installing so you might have to try some different gapps!!!!
Please give first boot a GOOD TEN minutes.
I DO NOT OWN THIS DEVICE!! I OWN THE QUINCYATT!! I AM JUST SHARING THIS BUILD BECAUSE I WAS FEELING GENEROUS!! PLEASE DO NOT ASK FOR NEW BUILDS!! I will update this rom "IF" I feel like it & "IF" I have the time. I am not trying to be rude here but many other devices I have that I own & support. Please be kind and appreciate this rom thread if you enjoy it. One last thing, let me know if it boots or not? This is just to give this device owner something new to flash. I believe you can somehow flash the quincyatt builds to this device, OR SO I'VE READ, I just don't know how to tell you to go about doing so.
Special thanks to CyanogenMod, SlimRoms,for making their source open. @NoSpamDan for helping with this device, hercules, & skyrocket. Be sure N thank him for getting Data working. Also I believe that @SultanXDA helped him with that a bit.
Sources:
CyanogenMod
SlimRoms
LiquidSmooth
XDA:DevDB Information
Candy5, ROM for the T-Mobile Samsung Galaxy Note
Contributors
gimmeitorilltell, gimmeitorilltell
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod, SlimRoms, BeanStalk, LiquidSmooth
Version Information
Status: Testing
Created 2015-03-03
Last Updated 2015-03-02
I can't believe that development is still so strong for this phone!!!! A very pleasant surprise. Thank you so much @ gimmeitorilltell
With this t-mo build do you know if the wifi calling app is included? I have flashed a t-mo build to this Att phone a couple years ago and it worked very well with the wifi calling working. I may just have to give it a try and see for myself!
sashusmom said:
I can't believe that development is still so strong for this phone!!!! A very pleasant surprise. Thank you so much @ gimmeitorilltell
With this t-mo build do you know if the wifi calling app is included? I have flashed a t-mo build to this Att phone a couple years ago and it worked very well with the wifi calling working. I may just have to give it a try and see for myself!
Click to expand...
Click to collapse
If you have the AT&T version then I have a few 5.0 roms over in the right section of development. Also have cm-12.0 in the original development section of AT&T devices. I am not sure about the wifi calling for T-mobile but I believe that all of my builds have wifi calling.
gimmeitorilltell said:
If you have the AT&T version then I have a few 5.0 roms over in the right section of development. Also have cm-12.0 in the original development section of AT&T devices. I am not sure about the wifi calling for T-mobile but I believe that all of my builds have wifi calling.
Click to expand...
Click to collapse
Yes, I have an att version- i717. I successfully flashed a tmobile rom with correct baseband changes when this phone was 6 months old-got it on launch day- and the official t-mobile wifi calling app was working.
I don't know of any other carrier that supports official wifi calling with your carrier number other than t-mo. Att is working on it, but it's still not out. Sometime in 2015 att will launch that official call over wifi with your att number. It comes in very handy when you are in a dead zone. Just turn on wifi calling and your phones works the same as over the 3g and lte connections, but on any wifi network with your native number.
I know voip over wifi works with 3rd party apps. Is that the kind of wifi calling you're referring to??
Either way, I will definitely check out your other 5.0 roms for the att Note. In the ATT side of development. My Note has been on the shelf for the past year or so!!!
Hi. I need help. I followed all the steps above but I can´t flash the rom. It always gets stuck at the goggle logo. I used CWM, because if I try WTRP I get a message error like " E:unknown volume for path. Any ideas? :crying:
Memocama said:
Hi. I need help. I followed all the steps above but I can´t flash the rom. It always gets stuck at the goggle logo. I used CWM, because if I try WTRP I get a message error like " E:unknown volume for path. Any ideas? :crying:
Click to expand...
Click to collapse
You NEED to wipe everything except the sdcard & internal sd. Try that to see what you get?
No luck. Did all the wipes and nothing. I'm considering do a dirty install.
I get this message: error executing updater binary in zip "/sdcard1/candy5
Memocama said:
No luck. Did all the wipes and nothing. I'm considering do a dirty install.
I get this message: error executing updater binary in zip "/sdcard1/candy5
Click to expand...
Click to collapse
Your recovery seems like it needs updated. I do not own this device so not sure which one will work. Do some research & see if you can flash my quincyatt roms to this device maybe? It has been done in the past & I keep those roms updated.
gimmeitorilltell said:
Your recovery seems like it needs updated. I do not own this device so not sure which one will work. Do some research & see if you can flash my quincyatt roms to this device maybe? It has been done in the past & I keep those roms updated.
Click to expand...
Click to collapse
Pollution used the patch for ROMs from att but he hasn't updated the patch to run 5.0 I have a busy day at work tomorrow but when u get home I'll give it a shot thanks gimme!!
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
angelf82 said:
Pollution used the patch for ROMs from att but he hasn't updated the patch to run 5.0 I have a busy day at work tomorrow but when u get home I'll give it a shot thanks gimme!!
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im sure pollution is still around so maybe he would update things? If he isn't interest in this device any longer then maybe someone else could update his scripts, with permission from pollution of course.
i need help i get stuck at the goggle logo any idea ?? ?
i need help i get stuck at the goggle logo any idea ?? ? :crying::crying::crying::crying::crying:
What TWRP version do I use? I don't see one to download in post #2.
Boot into recovery (USE MY TWRP (ONLY) in second post or CWM if it's been updated)
gimmeitorilltell said:
Your recovery seems like it needs updated. I do not own this device so not sure which one will work. Do some research & see if you can flash my quincyatt roms to this device maybe? It has been done in the past & I keep those roms updated.
Click to expand...
Click to collapse
I used CWM 6.0.4.3 and your version of TWRP 2.8.3.0 whit no success. Until I find a solution, I´m using the Beanstalk ROM. But I wonder if there is conflict with the kernel.
---------- Post added at 12:19 AM ---------- Previous post was at 12:13 AM ----------
wgiddyup and nourmax64: I backed up my phone before flash the ROM. I wanna think you did so. If not, the only way to get your phone back is reflash the stock ROM with Odin. And then, if you want update your OS to KitKat, use the Beanstalk ROM, until we find a way to install this ROM.
wgiddyup said:
What TWRP version do I use? I don't see one to download in post #2.
Boot into recovery (USE MY TWRP (ONLY) in second post or CWM if it's been updated)
Click to expand...
Click to collapse
Memocama said:
I used CWM 6.0.4.3 and your version of TWRP 2.8.3.0 whit no success. Until I find a solution, I´m using the Beanstalk ROM. But I wonder if there is conflict with the kernel.
---------- Post added at 12:19 AM ---------- Previous post was at 12:13 AM ----------
wgiddyup and nourmax64: I backed up my phone before flash the ROM. I wanna think you did so. If not, the only way to get your phone back is reflash the stock ROM with Odin. And then, if you want update your OS to KitKat, use the Beanstalk ROM, until we find a way to install this ROM.
Click to expand...
Click to collapse
Sorry about the TWRP mishap. My OP is a C&P from my quincyatt thread which has the twrp for that device. This device would need someone to update recovery for it.
Hello.
Any news on how to install this rom without any problems. I tried and got stuck on flying dots.
I would like to try this rom.
Thanks.
gimmeitorilltell said:
Sorry about the TWRP mishap. My OP is a C&P from my quincyatt thread which has the twrp for that device. This device would need someone to update recovery for it.
Click to expand...
Click to collapse
Hey gimme any luck updating this Rom for us? I have beanstalk but it gives me at least 5 BSOD (blue screens of death) a day...thanks in advanve
angelf82 said:
Hey gimme any luck updating this Rom for us? I have beanstalk but it gives me at least 5 BSOD (blue screens of death) a day...thanks in advanve
Click to expand...
Click to collapse
Unfortunately work has me very tied up lately and I have not updated this rom. Maybe you and some others can see about flashing my quincyatt roms to this device? It has been done in the past & I really have no time to look into this currently. You may be able to kindly ask @pollution for some assistance or insight on what needs to be done. I believe he was the Dev that made this possible in the past?
gimmeitorilltell said:
Unfortunately work has me very tied up lately and I have not updated this rom. Maybe you and some others can see about flashing my quincyatt roms to this device? It has been done in the past & I really have no time to look into this currently. You may be able to kindly ask @pollution for some assistance or insight on what needs to be done. I believe he was the Dev that made this possible in the past?
Click to expand...
Click to collapse
Thank you I'll see if he would....
angelf82 said:
Thank you I'll see if he would....
Click to expand...
Click to collapse
Sounds good. If he is not able to help I would be willing to see what I can do when/if I get the time. Not sure when that would be but time is not on my side currently.
gimmeitorilltell said:
Sounds good. If he is not able to help I would be willing to see what I can do when/if I get the time. Not sure when that would be but time is not on my side currently.
Click to expand...
Click to collapse
No worries bro I have another question can I install a ROM through my internal sd card? My phone is not reading my micro sd card so I can not install anything and my USB port does not work so if I do a factory reset through custom recovery will it delete the rom I download it?