Related
Hi,
I followed the instructions to convert L09 to Middle Eastern & North and South Africa version and it all worked well for me, but I'm wondering how do I convert to Chinese version? Can anyone help with some information?
Like do i just need to edit the build.prop and have the correct regions update.app file? or is something else necessary.
Thanks in advance
Gavin
brumgav said:
Hi,
I followed the instructions to convert L09 to Middle Eastern & North and South Africa version and it all worked well for me, but I'm wondering how do I convert to Chinese version? Can anyone help with some information?
Like do i just need to edit the build.prop and have the correct regions update.app file? or is something else necessary.
Thanks in advance
Gavin
Click to expand...
Click to collapse
So I managed to convert to Chinese version. This is how I did it.
While fresh in the memory, instructions on how to change the region+ firmware to UL00
What do you need (links in 004's original post earlier in the thread or here:
1. Firmware UL00-C433B114 (Middle East, North and South Africa)
2. The oeminfo.img program to change the locale (45.69 KB) Anti-Virus may or complain, so disable it)
3. Mounted on the phone ES Explorer (Solid or Root Explorer will not work !!!)
4. You need a copy of your existing ROM versions recovery.img. You can get this using the Huawei ROM extractor tool.
What to do:
1. Flash TWRP Recovery through Fastboot (Bootloader must be unlocked)
2..Get Root (install SuperSU.zip through TWRP), reboot.
3. Install and enable root in settings of ES Explorer and go to the folder /dev/block/platform/hi_mci.0/by-name/
4. Copy oeminfo file and transfer it to your computer
5. On your computer, unpack the oeminfo.exe program from the RAR. Put your oeminfo file in the same folder.
6. Rename oeminfo in oeminfo.img
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
8. Rename oeminfo.img back to oeminfo and copy to your mobile phone
9. Replace the original file in the phone to change (overwrite)
10. Go to the phone / system / and open the file build.prop
11. Find the line ro.build.displey.id = change your version to "=" CRR-UL00C433B000 and save changes
EDIT ?: These steps (10/11) MUST be completed or it will not allow you to update later with new regions ROM
12. Extract the new ROM file on your computer with the firmware.
13. Copy dload folder with the Update.app file and copy it to the phone's internal memory or MicroSD card
14. Flash back stock recovery from your existing ROM (use the extractor tool if needed). You can do this now or at the end before flashing but you must remove TWRP and ROOT before attempting to flash new rom.
15. On the phone go Settings - Update.
16. Select Menu - Local update
I then ensured Google Play was installed.
After doing this, flashed TWRP again and Rooted the phone, I then edited the oeminfo file using the above method, changing the attribute back to "dualcu/cn". After this I edited the build.prop to using the above method but this time I changed "ro.build.display.id=CRR-UL00C00B131".
I then removed root and flashed the original Huawei recovery, and then rebooted and went to update settings. I searched for update and a new file was found however a modified system was detected so it offered to download a full version which was the B160 build. This downloaded and then updated and now I have CRR-UL00C00B160 version
Whats the advantage of this Version?
There are more updates to the Chinese version..they are on build B160 whereas UK still on build B144.
Some other features like dual SIM should work however I haven't tested this.
Other things like build in virus scanner, permissions manager and also the ability to set the date of your mobile data plan to help keep track of data usage and allowance.
Pressure sensitive screen is also featured although not yet used in any apps but maybe it will be enabled soon by Huawei
brumgav said:
So I managed to convert to Chinese version. This is how I did it.
While fresh in the memory, instructions on how to change the region+ firmware to UL00
What do you need (links in 004's original post earlier in the thread or here:
1. Firmware UL00-C433B114 (Middle East, North and South Africa)
2. The oeminfo.img program to change the locale (45.69 KB) Anti-Virus may or complain, so disable it)
3. Mounted on the phone ES Explorer (Solid or Root Explorer will not work !!!)
4. You need a copy of your existing ROM versions recovery.img. You can get this using the Huawei ROM extractor tool.
What to do:
1. Flash TWRP Recovery through Fastboot (Bootloader must be unlocked)
2..Get Root (install SuperSU.zip through TWRP), reboot.
3. Install and enable root in settings of ES Explorer and go to the folder /dev/block/platform/hi_mci.0/by-name/
4. Copy oeminfo file and transfer it to your computer
5. On your computer, unpack the oeminfo.exe program from the RAR. Put your oeminfo file in the same folder.
6. Rename oeminfo in oeminfo.img
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
8. Rename oeminfo.img back to oeminfo and copy to your mobile phone
9. Replace the original file in the phone to change (overwrite)
10. Go to the phone / system / and open the file build.prop
11. Find the line ro.build.displey.id = change your version to "=" CRR-UL00C433B000 and save changes
EDIT ?: These steps (10/11) MUST be completed or it will not allow you to update later with new regions ROM
12. Extract the new ROM file on your computer with the firmware.
13. Copy dload folder with the Update.app file and copy it to the phone's internal memory or MicroSD card
14. Flash back stock recovery from your existing ROM (use the extractor tool if needed). You can do this now or at the end before flashing but you must remove TWRP and ROOT before attempting to flash new rom.
15. On the phone go Settings - Update.
16. Select Menu - Local update
I then ensured Google Play was installed.
After doing this, flashed TWRP again and Rooted the phone, I then edited the oeminfo file using the above method, changing the attribute back to "dualcu/cn". After this I edited the build.prop to using the above method but this time I changed "ro.build.display.id=CRR-UL00C00B131".
I then removed root and flashed the original Huawei recovery, and then rebooted and went to update settings. I searched for update and a new file was found however a modified system was detected so it offered to download a full version which was the B160 build. This downloaded and then updated and now I have CRR-UL00C00B160 version
Click to expand...
Click to collapse
Hello, could you please tell me why do you write (type) in step 11. CRR-UL00C433B000 instead of CRR-UL00C433B114? Thanks for your answer.
MoritzSu said:
Hello, could you please tell me why do you write (type) in step 11. CRR-UL00C433B000 instead of CRR-UL00C433B114? Thanks for your answer.
Click to expand...
Click to collapse
you need to set your build.id to B000 so you can update to B114 with an full update package in the EMUI Update app
Tuerkay said:
you need to set your build.id to B000 so you can update to B114 with an full update package in the EMUI Update app
Click to expand...
Click to collapse
Thanks for your soon answer. To say the truth, i have just completed the process. Unfortunately, i wrote (in my case) CRR-L09C432B114 instead of CRR-L09C432B000; my device ist just running with this B114 Rom. I was running the B119 Rom before, what should i do now in order to receive the updates?
MoritzSu said:
Thanks for your soon answer. To say the truth, i have just completed the process. Unfortunately, i wrote (in my case) CRR-L09C432B114 instead of CRR-L09C432B000; my device ist just running with this B114 Rom. I was running the B119 Rom before, what should i do now in order to receive the updates?
Click to expand...
Click to collapse
if you have changed your localization ( the "Cxxx" part) then you won´t receive any updates. You have to manualy update via Update.APP files.
Your IMEI is linked to you Build/Localization. This way, Huawei makes sure that every phone receives the right update file. If you change one of both, you won´t receive OTA updates anymore, since the update system can´t assign the "right" update file.
Anyone can confirm the dual sim function work after this procedure?? This I want a dual sim active dfsa
it does not, EU Mate S does not have dual-dim hardware
brumgav said:
7. Run oeminfo.img.exe and type hw / meafnaf replacing dualcu / cn - click apply
Click to expand...
Click to collapse
Anybody know, where to get this information from?
if I want to change to any other region where can I find the correct information for the OEMINFO.IMG?
Sventastic said:
Anybody know, where to get this information from?
if I want to change to any other region where can I find the correct information for the OEMINFO.IMG?
Click to expand...
Click to collapse
Sorry I don't know
Please share file oeminfo Dual Sim CRR-UL00 any region (hw/meafnaf or dualcu/cn)
Hi My friends
Can anybody suggest any update file for CRR-UL00C433B114 version.. When we get the marshmallow upadate...:crying:
..
deleted
abishrajan said:
Hi My friends
Can anybody suggest any update file for CRR-UL00C433B114 version.. When we get the marshmallow upadate...:crying:
Click to expand...
Click to collapse
First of all thanks ,
Finally I got the update for CRR-UL00C433B114
Do the following steps
1) Download this file from the link below :
http://consumer.huawei.com/ae/support/downloads/detail/index.htm?id=71483
(May be just wait few seconds for the file need to display on site )
2) Extract that file and you get UPDATE.APP
3) Put UPDATE.APP file inside the dload folder of your SD card (If there is no dload folder create one folder and rename that to dload)
4) Go to settings - update and select local update. It will restart your mobile and install the updates
5) Now you are on CRR-UL00, Android5.1, EMUI 3.1, C433B146,
6) Now Go to your setting > updater > check for updates > you will be able to see the Android 6.0 OTA file and you can download and update to marshmallow.... Good luck :laugh::laugh::laugh:
abishrajan said:
First of all thanks ,
Finally I got the update for CRR-UL00C433B114
Do the following steps
1) Download this file from the link below :
http://consumer.huawei.com/ae/support/downloads/detail/index.htm?id=71483
(May be just wait few seconds for the file need to display on site )
2) Extract that file and you get UPDATE.APP
3) Put UPDATE.APP file inside the dload folder of your SD card (If there is no dload folder create one folder and rename that to dload)
4) Go to settings - update and select local update. It will restart your mobile and install the updates
5) Now you are on CRR-UL00, Android5.1, EMUI 3.1, C433B146,
6) Now Go to your setting > updater > check for updates > you will be able to see the Android 6.0 OTA file and you can download and update to marshmallow.... Good luck :laugh::laugh::laugh:
Click to expand...
Click to collapse
Thanks for Your Advice .
One question though does updating from B114 to B146 Wipe The data as in downloaded updates ??
andromodgod said:
Thanks for Your Advice .
One question though does updating from B114 to B146 Wipe The data as in downloaded updates ??
Click to expand...
Click to collapse
no it does not.
but this method not working for me (no Android 6.0 OTA)
jafarsalih said:
no it does not.
but this method not working for me (no Android 6.0 OTA)
Click to expand...
Click to collapse
if you have changed your localization, you won´t get the OTA Update.
Your IMEI is connected to one localization. This way every phone will receive the suitable update. If you have changed your localization (e.g. if you swapped from UL00C00BXXX to UL00C433BXXX) you won´t receive any OTA because the servers can´t find a suitable update for your IMEI/Build combination.
abishrajan said:
First of all thanks ,
Finally I got the update for CRR-UL00C433B114
5) Now you are on CRR-UL00, Android5.1, EMUI 3.1, C433B146,
6) Now Go to your setting > updater > check for updates > you will be able to see the Android 6.0 OTA file and you can download and update to marshmallow.... Good luck :laugh::laugh::laugh:
Click to expand...
Click to collapse
Can you share the OTA File ...
andromodgod said:
Can you share the OTA File ...
Click to expand...
Click to collapse
CRR-UL00 C433B146
http://consumer.huawei.com/ae/support/downloads/detail/index.htm?id=71483
i think he asked for the 6.0 ota file. not the B146
File step 1
Hi, please can you upload the file descriped in step 1. it is no longer available.
I've a Huawei P9 EVA-L19C185B220 and are on Android MM.
I REALLY want to update my phone's os to Android nogat..
Any tips?
And sorry for my bad English
how much u will pay me
spring80 said:
how much u will pay me
Click to expand...
Click to collapse
Oh no, common spring..
Don't get me wrong but I tried as hell to do what you said but it was pointless
there is new update now for L19C185 it is B385 last version of nougat.
download this :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v78896/f2/full/update.zip
extract Update.app file to dload folder and use the dload method to install it.
after finish and rebooting system.
download this:
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
extract update.app to dload folder and use the dload method to install it.
this is
dload method: put update.app into dload folder ,and use the code in the dialer :*#*#2846579#*#* and choose software upgrade
spring80 said:
there is new update now for L19C185 it is B385 last version of nougat.
download this :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v78896/f2/full/update.zip
extract Update.app file to dload folder and use the dload method to install it.
after finish and rebooting system.
download this:
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
extract update.app to dload folder and use the dload method to install it.
this is
dload method: put update.app into dload folder ,and use the code in the dialer :*#*#2846579#*#* and choose software upgrade
Click to expand...
Click to collapse
I tried to install the first file but it failed at 5%
hassan1111 said:
I tried to install the first file but it failed at 5%
Click to expand...
Click to collapse
me too failed at 5% (incompatibility)
I also using eva-l19c185b220
I'm finally on Android n!!
I used this link from frimware finder app
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73830/f1/full/update.zip
{Tools that you need}
1.A P9 lite
2.The files you want to flash (in my case L21C432B370+data files)
3.Firmware Finder
4. A brain
5.Patience
Steps:
1.Download the files
2.Launch firmware finder and start a proxy update on the same software as the downloaded packages. But after it goes to 1%, pause the update
3.Go to HwOUC/(the new folder) and paste the zips there
4.Resume the download
5.Update
6.???
7.Profit
I did this on my P9 lite and it's working.
This method is ONLY if you don't got the Nougat update and the proxy method doesn't work.
If you come here to call me a fgt or something, then don't comment here.
This is a NOOB friendly thread.
Thank you and have a nice day
Johnny TDN said:
{Tools that you need}
1.A P9 lite
2.The files you want to flash (in my case L21C432B370+data files)
3.Firmware Finder
4. A brain
5.Patience
Steps:
1.Download the files
2.Launch firmware finder and start a proxy update on the same software as the downloaded packages. But after it goes to 1%, pause the update
3.Go to HwOUC/(the new folder) and paste the zips there
4.Resume the download
5.Update
6.???
7.Profit
I did this on my P9 lite and it's working.
Click to expand...
Click to collapse
Well I have done exactly what you have described but when I resume the download , the update program keeps downloading the files , erasing the ones I did copy/paste in HwOUC/folder
kourkoubas1981 said:
Well I have done exactly what you have described but when I resume the download , the update program keeps downloading the files , erasing the ones I did copy/paste in HwOUC/folder
Click to expand...
Click to collapse
If the proxy method works for you, then that's great.
There are times when it works, or resumes the download (when it gets stuck on 0%)
Maybe you didn't placed the files with the correct names.
hi. iv'e been lookin in alot of threads but no luck so far. been doing about 200 dload updates without any more luck. first of all my bluetooth, nfc or nothing like that is working (the wifi is workin and the phone itself works otherwise) so i tried many times to install twpr without any luck. if i use fastboot it goes to the part where it should install the files. then it says : FAILED (remote: image verification error)
locked bootloader and guess i can't do much there now? all the pages i get send to is down. and read something about that it would be like taht for now?
i guess ive just worked myself blind now, so migh be easy, but i can't see it. so can anyone help here?
screenshot fro m the info about device attached
Let me help you, I have a mega folder just for that, gimme a sec
But first tell me what oeminfo have you had before? C432?
rupiec/ said:
Let me help you, I have a mega folder just for that, gimme a sec
But first tell me what oeminfo have you had before? C432?
Click to expand...
Click to collapse
not sure. u see i sold the phone, so did a wipe on it. then it just flipped. so i went and locked for a stock rom and installed that. booted up the phone and it worked. i did not check BT and all that. so the guy gave it back to me and asked if i could fix it.. so heh can't remember what was on it
Do you have any telegram/facebook/whatsapp anything? I could help you more hmm "live"
This way we'd also avoid making a mess in this thread
and if i input that code for project menu *#*#2846579#*#* it just goes back to dialer. nothing else.
kansel said:
hi. iv'e been lookin in alot of threads but no luck so far. been doing about 200 dload updates without any more luck. first of all my bluetooth, nfc or nothing like that is working (the wifi is workin and the phone itself works otherwise) so i tried many times to install twpr without any luck. if i use fastboot it goes to the part where it should install the files. then it says : FAILED (remote: image verification error)
locked bootloader and guess i can't do much there now? all the pages i get send to is down. and read something about that it would be like taht for now?
i guess ive just worked myself blind now, so migh be easy, but i can't see it. so can anyone help here?
screenshot fro m the info about device attached
Click to expand...
Click to collapse
See this :View attachment 4565599
Use only Step 4,Because you're already on C900B300
Dowload this:http://download-c.huawei.com/download/downloadCenter?downloadId=91706&version=358116&siteCode=cz,and unzip.
You're on Android 6 now, go to the settings, system update and Upgrade,There will be more upgrades.:good:
mrleja said:
See this :View attachment 4565599
Use only Step 4,Because you're already on C900B300
Dowload this:http://download-c.huawei.com/download/downloadCenter?downloadId=91706&version=358116&siteCode=cz,and unzip.
You're on Android 6 now, go to the settings, system update and Upgrade,There will be more upgrades.:good:
Click to expand...
Click to collapse
yeah did try this. whatever i do the install of the second one stops at 20% saying it can't complete update, download it again.. and all the files are correct in dload folder. so this phone is just special
kansel said:
yeah did try this. whatever i do the install of the second one stops at 20% saying it can't complete update, download it again.. and all the files are correct in dload folder. so this phone is just special
Click to expand...
Click to collapse
You say:all the files are correct in dload folder???????????
There should only be one file,UPDATE.APP
1- Install terminal emulator from google play
2- Run this command
Code:
getprop ro.hw.custPath
3- If the output is different from this => /cust/hw/eu => let us know
mrleja said:
You say:all the files are correct in dload folder???????????
There should only be one file,UPDATE.APP
Click to expand...
Click to collapse
yeah in that last one there was only update file. but did try different types. and some had more files. and then i also tried with only the update file. so did try everything there. just stops at 20%
Arnys said:
1- Install terminal emulator from google play
2- Run this command
Code:
getprop ro.hw.custPath
3- If the output is different from this => /cust/hw/eu => let us know
Click to expand...
Click to collapse
nope, it's /cust/hw/eu
and the phone was never branded (not locked to any provider) so the locked part itself should not be any issue. the thing is that whatever updates i try, the first small update goes fine. but when i try the second one, it stops at 20% the debugging and everything is ok. and done it all as it should be. now i can't install twpr, i can't put in that dialcode for the project menu (did read that was another way to flash) the phone itself is working, but bluetooth is not. neither nfc and hmm, not sure if any more. now i did insert a SD in the phone, and formated it with the phone. so guess that should work. so im kinda clueless to why none of the updates are working.
kansel said:
nope, it's /cust/hw/eu
Click to expand...
Click to collapse
Edit: maybe first try dload method thease files, seperate, first from update.zip, second from update_full_hw_eu.zip (in dload folder only update.app and then restart phone holding volume + and -)
EVA-L09C432B378 update.zip, update_full_hw_eu.zip and only then try next writed
First, you need download and with dload method instal this https://forum.xda-developers.com/p9/how-to/huawei-p9-rollback-package-eva-l09-t3497882
there are direct download
this file are small, and will configure phone to be able return to android 6
Create backup all files, other things you need, kuz using b136 will wipe all you got there
to return back to android 6 use this package : https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
here shortcut to mega site, works well for me
need to work, before start dload charge phone around 70%.
edit: Some questions:
Do you know, how aply dload method? (can you step by step how to? )
Can you enter in fastboot, and send pic what is here ? need to be similar in this picture
Arnys said:
Edit: maybe first try dload method thease files, seperate, first from update.zip, second from update_full_hw_eu.zip (in dload folder only update.app and then restart phone holding volume + and -)
EVA-L09C432B378 update.zip, update_full_hw_eu.zip and only then try next writed
First, you need download and with dload method instal this https://forum.xda-developers.com/p9/how-to/huawei-p9-rollback-package-eva-l09-t3497882
there are direct download
this file are small, and will configure phone to be able return to android 6
Create backup all files, other things you need, kuz using b136 will wipe all you got there
to return back to android 6 use this package : https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
here shortcut to mega site, works well for me
need to work, before start dload charge phone around 70%.
edit: Some questions:
Do you know, how aply dload method? (can you step by step how to? )
Can you enter in fastboot, and send pic what is here ? need to be similar in this picture
Click to expand...
Click to collapse
yes fastboot look like that (frp is red if i let the oem lovk in developer settings be enabled) but can make it look just like that yes.
and i insertet a 32gb micro sd card. and made a dload folder in the root of that card. and i put the update file in that folder and i hold volume + and - and power for like 5-6 seconds. and the emui comes up and start the update package
managed to find a working b378 on that last link but can't innstall the update in the megafilelink. says it's not the correct one for my system. so guess i'll try another one. but the phone is garbage soon...
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Arnys said:
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Click to expand...
Click to collapse
the first update.zip stopped at 26% now. saying "failed to check the update pacage. please download the pacage again" and that happens all the time. never on the small files, so wonder if i might have to get another sdcard)might be something wrong with it?
so i get to the part where ive got b378 but the phone is still the same..
Arnys said:
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Click to expand...
Click to collapse
i get to the 378. i run full update hw (second one) and the rollback (third one) but it stops when i take the file from mega, 2 folders and the update total 4.4 gb unpacked. so wonder if there might be something with my SD card, it stops on 5% and says failed to check the update pacage, please download the package again. seems kinda like i don't have the right to write to the system or something, since i believe this should be the correct files so im gonna do a last try with different SDcard.
kansel said:
i get to the 378. i run full update hw (second one) and the rollback (third one) but it stops when i take the file from mega, 2 folders and the update total 4.4 gb unpacked. so wonder if there might be something with my SD card, it stops on 5% and says failed to check the update pacage, please download the package again. seems kinda like i don't have the right to write to the system or something, since i believe this should be the correct files so im gonna do a last try with different SDcard.
Click to expand...
Click to collapse
jeah, dont know anything more that culda help.
good luck with different SD.
ps. do you have bootloader code? maybe can try HuRUpdate in twrp or try HWOTA7
there are latest firmware for your phone EVA-L09C432B504: update.zip , update_data_full_public.zip and update_full_EVA-L09_hw_eu.zip
no need sd card for this, but need all files renamed , read and try.
Arnys said:
jeah, dont know anything more that culda help.
good luck with different SD.
ps. do you have bootloader code? maybe can try HuRUpdate in twrp or try HWOTA7
there are latest firmware for your phone EVA-L09C432B504: update.zip , update_data_full_public.zip and update_full_EVA-L09_hw_eu.zip
no need sd card for this, but need all files renamed , read and try.
Click to expand...
Click to collapse
if i could install twpr i guess that would helt. tried all the flash, just get error when i do it in fastboot