I have just found out that if you hold all three buttons on the device that it recalibrates itself to fresh new start. will update you when i do it as my phone is stuck on facebook logo. Stock Rom
Related
MODS - PLEASE DELETE, SEE BELOW
Hello all,
I was working with my gf's CDMA Hero and I think that I have turned it into a brick. Here's the rundown of what will and will not happen...
WILL:
- power up to HTC logo screen. Occasionally will reboot on its own to HTC logo screen.
WON'T
- boot into recovery ROM by holding down HOME button when powering up. Was using Clockwork 3.0.0.5.
- boot into fastboot mode by holding down VOL DOWN button when powering up.
- boot into hboot mode by holding down VOL UP button when powering up.
- boot into OS. Was using CyanogenMod 6.1.0.
- initiate factory reset by holding down HOME and BACK buttons when powering up.
- restore via HTC Sprint RUU installer.
- appear as visible to ADB.
All the threads I've looked through so far seem to indicate that if you get an HTC screen, you aren't bricked. On the other hand, none of those threads have described the situation I'm in. Please help!
UPDATE - Moments after posting this, I was able to get back into the recovery mode and RUU'd the lil' bastard.
My dad's phone suddenly stopped working. It would start up, load the HTC logo and just stayed there until the battery died. As far as I know, he hasn't done anything to the phone that would cause this kind of error. I started looking into solution, I ran Recovery and Factory Reset from the Fastboot menu. Both didn't affect the device, it would still stay on the HTC logo. I recently tried upgrading the ROM using HTC's RUU exe to fix any Rom issue. I downloaded the ROM from their official site. The exe ran all the way through and even said finished at the end, but the phone now has a black screen. No lights at all and no LEDs are lit up. I tried restarting the phone by pressing and hoding the PWR button, PWR + Vol down, PWR + Vol up, and PWR + Vol up + Vol down and I get nothing. If anybody could help, I would greatly appreciate it. Thanks in advanced.
i have root my phone and install a custom rom on it and it was successfully installed and also work properly.
After some time i just want to format my phone ,so i gototo the backup and reset option in settings and factory reset my phone.
After hitting reset , phone will going to restart but not started.
now when i try start the phone,it will show xolo logo and after that android logo appear (like android logo with loading bar under it) and restart again and again infinitely but did not start properly.
also recovery option(either stock or cwm installed at the time of flashing) did not open by pressing the volume + power keys.
kindly suggest me, so that i can start my phone which now seems to be soft brick or dead.
I have a Samsung Galaxy s6 on 5.1.1 (Sprint SM-G920P)
I tried downloading and failing to install xposed stupidly. So then it was stuck on a bootloop. I then again stupidly did a factory reset thinking that it'll fix the problem (but it only got worst in my opinion) i then flashed twrp and tried to install the uninstall for xposed but i couldnt uninstall it because it wasnt any data folder to put it in since i ****ing did a factory reset. Anyways then i got frustrated and did an advanced wipe and cleared all the data... I am now just stuck on the "samsung galaxy s6 ... Powered by android" screen and i need help . I literarlly tried everything
Black and white Samsung logo showed up.
Initially I could only get to blue Downloading screen
By observing and trying various described ways I finally got to the Android recovery menu.
My current procedure to get there is here:
Turn off holding Down+Power
The b/w Samsung logo will automatically come up and stay that way forever
Hold Down+Power+Home until screen goes black and move finder from Down to UP while still holding the Power+Home
as soon as black and white Samsung logo comes up AND continue holding UP+Power+Home until Android flashes and recovery menu comes up.
Then I did go through the described wipe cash, and factory reset and some more wipe cash with reboot system in various combinations and always ended on black and white Samsung logo screen.
Tried to flash sboot but failed.
Then the new firmware showed up for sprint and i tried flashing 2 firmwares (G920PVPU3BOJ7_G920PSPT3BOJ7_SPR and G920PVPU3BOI1_G920PSPT3BOI1_SPR)but both succeeded but is still on the samsung logo screen
From the recovery menu only power down selection is useful as it does turn the phone off until I turn it on. The power button does not power off – it just boots back on.
Apply update from cache gives yellow text in the bottom of the scree: “APPLY_CHEK is deprecate.”
I have no clue how to use e.g. first 3 menu items.
Reboot to bootloader – just brings the b/w logo .
View log displays row upon row of things I have no clue about – pages of it.
On the very bottom of the screen – in yellow – there are two lines:
“dm-verification failed…
Need to check DRK first…”
Please help. — Max
Soo i have an infinix hot 4 pro android 6.0 and i was trying to get in it TWRP and SuperSU
and after several time i got stuck on the boot logo "infinix" and the buttons VOLUME UP + DOWN + POWER could not do anything to get me to fastboot or recovery mode or smth!!
and i'am trying to use ADB and it always says ERROR: device not connected
i tried to install drivers
i tried to use adb
and now i just want to get to the recovery to i can install stock rom on it again;
any suggestion abt how could I .???
Helllp
any replies plizzz
Android getting bricked seems to be bad luck to few Android users who roots their phone, when their phone stuck after the logo screen or could not boot beyond the device logo, it seems to be a bad omen anyway but there still a way out. If you are using infinix such as infinix hot, infinix hot note, infinix pro and it got bricked probably while you were trying to upgrade your device firmware or trying to install apps that finally seem to have bricked your infinx, then this post will guide you on how to unbrick infinix phone of any brand.
To unbrick infinix phone that got stuck after the boot logo or that could not go beyond the boot logo when trying to power it on, then you have to put some necessary things in place and then with this post you will be able to unbrick it.

When your infinix device is brick, in a simply language it means your device the OS is crash and could not perform its real function which might result from the fact that you are try to update your infinix OTA while you have a flash custom ROM running on it. If your infinix is rooted before upgrade the device, there is nothing bad in it but it.
Nevertheless, to unbrick infiinx phone that got stuck at the logo screen, we have two different procedures that will help you out to resolve the issue after the first attempt.
How To Unbrick Infinix Phone That Stuck After Logo
Here we will be sharing four different ways you can follow to unbrick an infinix phone and that could not go beyond logo screen when you try to power it on.
Do Factory Reset
Under this method, it is assumed that your infinix phone does not have root access, and you probably do not tampered with the phone and the phone just got stuck. Or before the phone bricked, you install an app and found that the device could no longer boot beyond logo screen when you try to power it on.
Switch of the phonePress and hold the volume up button (don’t release it)press and hold the power button, meaning now that you are holding the two button simultaneouslyHold the two buttons until you found yourself in the recovery mode which should either be ClockworkMod or android lying on its back.If your screen displays a robot lying on its back, you are definitely in stock recovery, and then press either of the two buttons you held to proceed further.If its show stock recovery, use the