CyanogenMod 13.1 Stable Builds (Unofficial)
STATUS: Abandoned, but heavily stable.
ROM Features:
Stable, clean, fast
Odexed, quicker boot
November 5 security update
Archived Downloads
Sources - Kernel Source
Reserved
Reserved
Oh boy your back!! Awesome man!
Great one @dgadelha.
What's new in this build?
FaizK said:
Great one @dgadelha.
What's new in this build?
Click to expand...
Click to collapse
Hi @FaizK,
This build includes the latest may security updates and many optimizations by myself for battery, performance, faster boot and stability.
Thanks!
dgadelha said:
Hi @FaizK,
This build includes the latest may security updates and many optimizations by myself for battery, performance, faster boot and stability.
Thanks!
Click to expand...
Click to collapse
Doze mode included?
FaizK said:
Doze mode included?
Click to expand...
Click to collapse
Hi @FaizK,
I can't confirm but Doze mode is set to be enabled once screen turns off.
Thanks.
Hi
Do i still need to use L speed app to optimize rom?
The optimizations is same with app?
Thank you
Can i dirty flash over your previous cm13.1 ?
sim is not detected,i did a clean flash
Nice @dgadelha you're back! Do i need to flash gapps in this rom? I will flash it now. Thanks!
simcard is not detected. many fc like media gapps even installing it clean.
shobint7 said:
simcard is not detected. many fc like media gapps even installing it clean.
Click to expand...
Click to collapse
I am not commenting against you, but did u check screenshots of 1st post. it clearlyshows signals in both sim. So something is wrong i ur procedure.
try to wipe system data and cache , flash rom , gapps , xposed then after boot by pass setup wizard without inserting sim. may b then it recognizes.
regards
herecomesmaggi said:
I am not commenting against you, but did u check screenshots of 1st post. it clearlyshows signals in both sim. So something is wrong i ur procedure.
try to wipe system data and cache , flash rom , gapps , xposed then after boot by pass setup wizard without inserting sim. may b then it recognizes.
regards
Click to expand...
Click to collapse
Ya i did this all but still no simcard detection and facing gapps error. so Im back to old cm13 build of dgadelha.
Everything works perfectly.
I don't have any FC's. SIM also is OK.
Finally. CyanogenMod ??
Sent from my ASUS_T00F using XDA-Developers mobile app
Thanks For developing for Zenfone 5!
One small question will you update Temasek Rom since it has more custom features than CM.
rkj911 said:
Thanks For developing for Zenfone 5!
One small question will you update Temasek Rom since it has more custom features than CM.
Click to expand...
Click to collapse
Hi @rkj911,
Due to the low download amount of Temasek, I'll not update it.
And, I'm just working on this CM13 on free times.
Thanks.
whats the free system space after flashing rom and gapps???and can i flash this on the older build of cm13.1 build by you?
systemCM-13.1-20160419.img
and
bootCM-13.1-20160504.img
Related
Warning! Please read before flashing!
Hi everyone, I wanted to test a rom for your device just to challenge myself so I built PA 4.4.4, I do not own the P970, and have not Idea if it even boots or flashes, any bricking or damage caused to your phone is your fault alone.
Instructions:
1. Full wipe
2. Flash ROM
3. Flash Gapps either micro or nano
4. reboot
5. Enjoy
What's working
Everything(?)
What's NOT working
You tell me (comments or PM)
Download:
ROM
PA GAPPS
Source
Device
Kernel
Updates
30/10: Fixed mobile data thanks to washbeer and nameless ROM team
28/10: Fixed boot/network/sound issues in build (I hope), switched vendor files to @Jelixis Repo's
27/10: Fixed flash issue thank to @washbeer
Credits: rac00n from github, its his device sources, all the PA dev team its, their rom.
If someone could post some screenshots, that would be great, or a video If it boots that is.
XDA:DevDB Information
[UNOFFICIAL][ROM] [4.4.4] [P970]ParanoidAndroid [10/30], ROM for the LG Optimus Black
Contributors
sooti, washbeer, Evisceration, dhiru1602
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Testing
Created 2014-10-21
Last Updated 2014-10-30
sooti said:
Warning! Please read before flashing!
Hi everyone, I wanted to test a rom for your device just to challenge myself so I built PA 4.4.4, I do not own the P970, and have not Idea if it even boots or flashes, any bricking or damage caused to your phone is your fault alone.
Instructions:
1. Full wipe
2. Flash ROM
3. Flash Gapps either micro or nano
4. reboot
5. Enjoy
Download:
ROM
PA GAPPS
Source
Device
Kernel
Credits: rac00n from github, its his device sources, all the PA dev team its, their rom.
If someone could post some screenshots, that would be great, or a video If it boots that is.
XDA:DevDB Information
[UNOFFICIAL][ROM] [4.4.4] [P970]ParanoidAndroid [10/21], ROM for the LG Optimus Black
Contributors
sooti
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Testing
Created 2014-10-21
Last Updated 2014-10-21
Click to expand...
Click to collapse
hello,
won't install (error 7)
thanks anyway. could you see what's happening?
nice, let me know if you need some help.
also thank mainly Evisceration and dhiru1602, they did a ton of work for this device
ptxpaulo said:
hello,
won't install (error 7)
thanks anyway. could you see what's happening?
Click to expand...
Click to collapse
OK, washbeer helped me out, compiling new one, should fix the issue
OK, I think I fixed it, new fixed ROM will be uploaded within 2 hours, please flash it and post screenshots ASAP if it works
sooti said:
OK, I think I fixed it, new fixed ROM will be uploaded within 2 hours, please flash it and post screenshots ASAP if it works
Click to expand...
Click to collapse
Any news? Sorry to ask but I'm waiting since you anounced upload...
ptxpaulo said:
Any news? Sorry to ask but I'm waiting since you anounced upload...
Click to expand...
Click to collapse
Seems like we have another build error, I'll have to look into it again, don't know why... sorry
sooti said:
Seems like we have another build error, I'll have to look into it again, don't know why... sorry
Click to expand...
Click to collapse
ok, thanks
ptxpaulo said:
ok, thanks
Click to expand...
Click to collapse
OK I believe I fixed it thanks to washbeer
New link
EDIT: Could someone post some screenshots? or at least say if this works? if so ill build you guys some more roms
sooti said:
OK I believe I fixed it thanks to washbeer
New link
EDIT: Could someone post some screenshots? or at least say if this works? if so ill build you guys some more roms
Click to expand...
Click to collapse
hmm looks like it bootloops. scumbag mediaserver
edit: well i got it booting.
i simply deleted all audio libs from the zip in /system/lib/hw.
so yes, it's alive but without sound.
what works:
*bluetooth
*wifi
*camera
*automatic brightness
not working:
*audio
*mobile network
some screens attached
edit2: looks like the vendor tree was outdated, sooti is taking care of it
washbeer said:
hmm looks like it bootloops. scumbag mediaserver
edit: well i got it booting.
i simply deleted all audio libs from the zip in /system/lib/hw.
so yes, it's alive but without sound.
what works:
*bluetooth
*wifi
*camera
*automatic brightness
not working:
*audio
*mobile network
some screens attached
Click to expand...
Click to collapse
glad to hear it works, any idea why no mobile network?
EDIT: I think I found the issue,
Uploading new build now, should fix sound and network issue
Gah! You beat me to it. XD I was porting PA too XD good luck and cheers on the new rom! Looking forward to working with you on the near future
well....
ROM boots after 1 hour...
No sd card (maybe hardware problem has I have mixed with my phone hardware because of hardware buttons don't work).
Now I can't reboot into recovery nor having sd card).
But I can tell that it boots (hardly). and it works .
Keep trying
Cheers
Jelixis said:
Gah! You beat me to it. XD I was porting PA too XD good luck and cheers on the new rom! Looking forward to working with you on the near future
Click to expand...
Click to collapse
talk to me in private, we are trying to get data to work and can't
ptxpaulo said:
well....
ROM boots after 1 hour...
No sd card (maybe hardware problem has I have mixed with my phone hardware because of hardware buttons don't work).
Now I can't reboot into recovery nor having sd card).
But I can tell that it boots (hardly). and it works .
Keep trying
Cheers
Click to expand...
Click to collapse
Strange.. are you sure you flashed correctly? full wipe? others said everything works smooth except the data (3G/2G)
sooti said:
talk to me in private, we are trying to get data to work and can't
Strange.. are you sure you flashed correctly? full wipe? others said everything works smooth except the data (3G/2G)
Click to expand...
Click to collapse
Aeroi is in the same boat, no data. I'm looking for commits on the Nameless gerrit cause it seems to be working there.
Jelixis said:
Aeroi is in the same boat, no data. I'm looking for commits on the Nameless gerrit cause it seems to be working there.
Click to expand...
Click to collapse
Mobile data is fixed, pm
washbeer said:
Mobile data is fixed, pm
Click to expand...
Click to collapse
Thank you saw it, building fixed (hopefuly) build now, I will post a link when its done
EDIT: link is up in the first page, please let me know if it all works
BUG's & FC's
- Hey guys thanks for the work that you're doing for the old LG Optimus Black. I ported the rom on my Korean OB Lg KU5900. I flashed KU5900_V30I_00_CP.fls together with [PATCHED]V20B using Smart flash tool to make it P970 and have the Open Recovery. It's amazing because it works. However, I just noticed that the rom is a little bit laggy even no apps have been installed yet. It became more laggy when I installed my other apps. By the way, we're hoping that you'll fix it especially the memory management of the rom coz the phone is only 512MB of ram. Keep it up and waiting for your further developments. Thanks a lot!^^
what works:
*bluetooth
*wifi
*camera [Only in taking pictures]
*automatic brightness
*audio
*mobile network
working but with bugs:
*CAMCORDER's Audio and Video were not synchronize. There's a delay on movements.
*The ROM lags a lot while gaming and sometimes black screen occurs while you're browsing. You have to remove and re-attach the battery to turn back on.
FC's
*Kernel Tweaker always not responding
*Incompatible on some apps
Nice ROM)
This is an unofficial SlimKat 9.1 build with patch for "Stagefright" - Bugs
CVE-2015-1538,
CVE-2015-3824,
CVE-2015-3827,
CVE-2015-3828,
CVE-2015-3829,
CVE-2015-3864,
CVE-2015-3876,
CVE-2015-6575,
CVE-2015-6602
included.
see also
- https://blog.zimperium.com/stagefright-vulnerability-details-stagefright-detector-tool-released/
Update: 2016.04.03
- clean fresh Build from SlimRoms Repo from GITHUB
Downloads
ROM: Slim-i9300-4.4.4.build.9.1-UNOFFICIAL-20160403-0846.zip - 142.48 MB UPDATE
GAPPs: LINK
Optional: Custom Kernel
Important
- You will need an current version of Google Play Services - I backed up the apk from my unpachted slimkat 9.0 system.
but you can get it also from here:
http://www.apkmirror.com/apk/google-inc/google-play-services/
Instructions- for an update from official SlimKat 9.0:
1.) Flash ROM
2.) Flash GAPPs
3.) Optional: Flash Custom Kernel
4.) Reboot - Ignore Warnings about missing Google Play Services
5.) Manual install Google Play Services - use your backed up apk!
6.) Reboot -> Ingore "GPS FC" Message, i get this warning after each reboot for a long time with slimkat ...
All credits to SlimRoms and CyanogenMod !
I'm not sure what else you did to the ROM, apart from adding the patches, but it feels significantly faster than the official Slimkat 9.0, which wasn't exactly a slouch. Good work!
This ROM is a keeper.
Sent from my GT-I9300 using XDA Free mobile app
downloading now...
acornkenya said:
I'm not sure what else you did to the ROM, apart from adding the patches, but it feels significantly faster than the official Slimkat 9.0, which wasn't exactly a slouch. Good work!
Click to expand...
Click to collapse
Alright agree wit this user. this rom feels swiftier than the official slim 9.0
Thank you so much for this! I've been using SlimKat on this device for months and it was fine as it is don't get me wrong but I'm really happy to be able to flash your updated version! I just tried SlimLP for one day and the single forced reboot I had immediately made me want to go back to SlimKat. In this case, your updated version
Vulnerable for me?
CVE-2015 6602
Nice ROM though.
Same here. CVE - 2015-6602
jikobutsu said:
Vulnerable for me?
CVE-2015 6602
Nice ROM though.
Click to expand...
Click to collapse
@Ping_2000
Me too.
This is a new vulnerability.
https://blog.zimperium.com/zimperiu...me-new-vulnerability-processing-mp3mp4-media/
But does it apply to KK rom?
If NCAS is correct there is no need to patch 2015 - 6602 for a KitKat Rom.
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
ansh1996 said:
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
No.
I have never had any problems with this ROM.
I use boeffla kernel.
I have Xposed installed.
I use some very heavy apps. For example watching streaming cricket test matches.
This version of boeffla
No, I've Never Experienced These Issues
ansh1996 said:
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Nope. I've never had problems with this ROM. I use it 'as-is,' stock kernel and all.
Hi,
just to clear things ... I don't change anything except the Stagefright related patches.
But it's nice to hear that the ROM feels often better.
I also had no complications till now.
Bye.
baltics said:
If NCAS is correct there is no need to patch 2015 - 6602 for a KitKat Rom.
Click to expand...
Click to collapse
is it safe to use this rom with that vulnerability ?????? are you sure ?????
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Ping_2000 said:
Hi,
just to clear things ... I don't change anything except the Stagefright related patches.
But it's nice to hear that the ROM feels often better.
I also had no complications till now.
Bye.
View attachment 3522246
Click to expand...
Click to collapse
can you please fix the last vulnerability '''' cve-2015-6602 '''' because the stagefright detector says my device is vulnerable ?????
hamza touati said:
is it safe to use this rom with that vulnerability ?????? are you sure ?????
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
can you please fix the last vulnerability '''' cve-2015-6602 '''' because the stagefright detector says my device is vulnerable ?????
Click to expand...
Click to collapse
Hi,
i did a build http://d-h.st/vwoB, please try it. I have actual no SGS III for testing.
I replaced frameworks/av with current version from cm11, last patches 26days ago ...
bye
Ping_2000 said:
Hi,
i did a build http://d-h.st/vwoB, please try it. I have actual no SGS III for testing.
I replaced frameworks/av with current version from cm11, last patches 26days ago ...
bye
Click to expand...
Click to collapse
Thanks @Ping_2000
I know you don't own this device but any chance you can update/optimize it? I can test the builds. Many i9300 still use this ROM and will appreciate this.
cokesucker said:
Thanks @Ping_2000
I know you don't own this device but any chance you can update/optimize it? I can test the builds. Many i9300 still use this ROM and will appreciate this.
Click to expand...
Click to collapse
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Ping_2000 said:
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Click to expand...
Click to collapse
Ok thanks, thought i would ask.
Yes the latest build is working great. Im using it now.patches seem to be in order
Ping_2000 said:
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Click to expand...
Click to collapse
Please can you make a fix for the last liquidsmooth 3.2 kk it should be easy because it is based on slimkat ??????
Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid
Reserved 1 (Screenshots)
Someone please share some screenshots!
FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.
yess i'v ben waiting for this rom to get MM
ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try
nice new rom for s3 thinks Dev
spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?
Are you maintaining this ROM now?
sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!
sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks
sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result
Hello there!
As you all know MIUI is a highly customizable ROM with an eye pleasing UI. I am here very happy to present for you the new MIUI 7 ROM for your OSPREY. I tried to make it boot. but even then lots of bugs may have crept in. So, I request the users to report the bugs here and help me in fixing them as I don't own this device and I will try to solve that in the next build.
Features
-------------------------------------------------------------------------------------------------
All MIUI 7 features including Notification Light settings, more Camera features like image filters, face detection, age & gender etc.
------------------------------------------------------------------------------------------------
Since it is itself a Alpha Port, it may have such bugs whiich can't be easily solved!
Finally there's a possibility for the eye-popping MIUI for Moto G 2015-osprey..
So Testers time to download rom and test it...If possible try fixing Bugs
-Added on 29/10/16
_Miui 7 based on 5.1.1
-based on stock moto rom
-Audio should work-test and report
-Booting build
Anyone can download this rom and continue bug fixing and if they succeed they can make their own thread of that rom!!
Download Link:http://d-h.st/ivW9
Link:- -MIUI-8-LINK-REMOVED-becuse-settings-FC
How to Install
-------------------------------------------------------------------------------------------------------------------------------
Download the MIUI ROM
Reboot into TWRP Recovery
Wipe data, system, cache and dalvik cache from Advanced Wipe menu
Flash the MIUI ROM
Then reboot your phone. The first boot may take up to 15~20 minutes and then u will be in setup wizard
Awesome,now we have a booting miui 7 -based on lollipop 5.1.1 ,thanks to @TestXenLuu for providing screenshots
What works
Boots
Storage
*maybe more
Bugs/what doesn't work:
Ril
Audio
Camera
Wifi
*maybe more
I hope some of you will come forward and help me in fixing bugs....
As I don't own this device I can't do much !
If you own this device you can flash this ROM and try fixing bugs by googling or by any other way.
I hope you successfully fix all the bugs....
I possible try to to give me logs
Now,don't ask me how to take logs Google it and give me logs I'll try to trace bug fixes!
Screenshots link:-
https://drive.google.com/drive/mobile/folders/0BytM-dsHWhj3NjB1NDJfRFNweHM?usp=drive_web
Thanks!
Credits(not in any order)
Huge thanks to MIUI Team for providing us the beautiful MIUI ROM.
Also a huge thanks to @ziwo for being my inspiration
Thanks to XDA forum members who apparently helped me in this project
Thanks to @TestXenLuu for testing ROM and providing screenshots
Thanks to @nitesh9 for making porting guide(osbusters)
Contributors
Innfinite4evr
ROM OS Version: Miui-V7 ,5.1.1 Lollipop
Required: TWRP-3.0.x, Unlocked bootloader
Version Information
Status: Alpha
Created 2016-10-22
Last Updated 2016-10-23
Reserved
Some tips for your MIUI v7 ROM
---------------------------------------------------------------------------------------
Turn off sync when not required since it drains much battery.
-------------------------------------------------------------------------------------------------------------------------------------------------
Auto brightness is calibrated somewhat low so increase the brightness slider according to your preference.
--------------------------------------------------------------------------------------------------------------------------------------------------
Give Autostart permissions to Kernel Adiutor and Color Control (if you are using it)
--------------------------------------------------------------------------------------------------------------------------------------------------------
It is pure MIUI so be careful while you flash anything or edit the build.prop
---------------------------------------------------------------------------------------------------------------------------------------------------------
Never update through OTA even if it shows available update since the update is meant only for redmi 2 prime device. Disable auto update in Updater app. Downloading and installing an OTA update will BRICK your phone.
------------------------------------------------------------------------------------------------------------------------------
Bug Fixes:
-----------------------------------------------
Yet to come
Very good work friend. I am here to help with testing and development, you can be sure that with the corrections, this will be my rom for daily use.
Nice work bro. Hope you make more new ROMs through the guide.
Cool.. bro
Sent from my MotoG3 using XDA-Developers mobile app
u r the real MVP
i tried it and its cool and everything but for now is unusable as a daily driver. btw what base did you use for the rom?cause cyanogen will give you more rejects and bugs i heard
bluedragon12 said:
i tried it and its cool and everything but for now is unusable as a daily driver. btw what base did you use for the rom?cause cyanogen will give you more rejects and bugs i heard
Click to expand...
Click to collapse
this is not based on miui patchrom it is a port and based on lollipop stockrom
miui on moto g 3rd generation
brother, installed here does not take long, however nothing works! has as not enter the settings, the sim card does not work nothing works! but it was the intention.
I look forward to improvements to try to install again. :Boa:
ummm its miui 8 bro a lil typo
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
Then do better... 1st of all you should be happy to be able to use MIUI for FREE on your osprey, 2nd the "trash" that you flashed probably took loads of time from the developer's part and still is on ALPHA stage, and this kind of comment that you just puked doesn't help or motivate the developer on improving the ROM. Just GTFO and grow up you self centered ****.
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
get lost. no one claimed it was working. and no one invited you.
So it's miui 8 not 7... amazing. Thank you man...i can't try it because osprey is my Daily driver...but when it Will be stable it Will be my Daily rom [emoji2] [emoji106]
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
excuse my language but r your eyeballs in your butt hole used as a*** beads?
did u even bother to READ the OP ?
have u ever tired porting a rom ?
the developers work for FREE for HOURS
if u cannot appreciate the work then move your ass somewhere else or make rom yourself
@Innfinite4evr where is the link of alpha 2 as there is changelog of it? there is only alpha 1 link. What about alpha 2? Is it released?
sagar27691 said:
@Innfinite4evr where is the link of alpha 2 as there is changelog of it? there is only alpha 1 link. What about alpha 2? Is it released?
Click to expand...
Click to collapse
look carefully ..
now i highlighted link
flashing... editing this post after boots up
UPDATE: DOESN'T BOOT (osprey x1541 1gb ram)
Innfinite4evr said:
look carefully ..
now i highlighted link
Click to expand...
Click to collapse
Doesn't boot
sagar27691 said:
Doesn't boot
Click to expand...
Click to collapse
Phuck,One more person confirm this to me
Yes, Doesn't boot
[ROM][BIG Qs] Pixel Experience & EVOLUTION-X [03/22/20] from kenzo's developers lover
These are 2 big Q rom versions for kenzo phones:
- Pixel Experience, PE Plus
- EVOLUTION-X 4.1.69
Kernel source from Amol Amrit
Device tree: Amol, me, ...
Vendor: Amol, me, ...
Download:
- PE: https://www.androidfilehost.com/?w=files&flid=302856
- PE Plus: https://www.androidfilehost.com/?w=files&flid=306423
- Evo-X: https://www.androidfilehost.com/?w=files&flid=304880
Note: in Evo-x: removed RecorderPrebuilt bcz full system partition
How to:
- Backup your data
- Wipe: System, Cache, Dalvik-cache, and Data
- Flash the rom
DO NOT FLASH GAPPS, ALREADY INCLUDED
I'm blind here but I think it can work well with your kenzo! (my friends tested, confirmed)
Changelogs:
03/02/2020: first work for kenzo
03/09/2020 PE:
- Security patch 03/05/2020
- Update sources to r31
03/09/2020 EVO-X:
- Security patch 03/05/2020
- Update sources to r31
03/13/2020:
- fix goodix (thank @aranhid)
- revert back sources as first build
03/22/2020: Try boot PE Plus, Fix Navbar for EVO
06/5/2020:
- Evo-X 4.3 / Security patch 05/05/2020
How does the encryption work:
- Remove all PIN, Pattern, Password and Fingerprint locks
- Plug the charger to 80% power
- Select Encrypt Phone, ... the Phone will perform encrypt
- When encryption is complate, set Locks and use
All creadit Amol Amrit, magicxavi, Sagar Rokade, Abhishek Dubey,... and me !
Just an opinion, you should make the thread more informative such as are gapps included or not, the feature of the rom, known bugs, the screenshot,etc.
z1d4n21 said:
Just an opinion, you should make the thread more informative such as are gapps included or not, the feature of the rom, known bugs, the screenshot,etc.
Click to expand...
Click to collapse
Sorry. Im not having kenzo phone. I have hydrogen (Mi Max)
Yes Gapps is ALREADY INCLUDED and i think goodix fp is dead
Brother why you don't use magicxavi's tree? And if you update evo x monthly then i will flash your rom
How to delete gapps?
This ROM is great. Can you update it without gapps? Thank you
kof1ko said:
ROM's great, but I don't need gapps. How to delete them
Click to expand...
Click to collapse
Use a system app remover?
Hi, I just flashed the EvoX ROM and so far it's working well except that for some reason I can't access the double tap and long press settings for my hardware buttons. Any fix for that?
dungphp said:
Sorry. Im not having kenzo phone. I have hydrogen (Mi Max)
Yes Gapps is ALREADY INCLUDED and i think goodix fp is dead
Click to expand...
Click to collapse
Ok thanks for clarifying, the evo x one is really good tho.
MonirOfficial said:
Brother why you don't use magicxavi's tree? And if you update evo x monthly then i will flash your rom
Click to expand...
Click to collapse
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
kof1ko said:
This ROM is great. Can you update it without gapps? Thank you
Click to expand...
Click to collapse
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
AhmadKushairi said:
Hi, I just flashed the EvoX ROM and so far it's working well except that for some reason I can't access the double tap and long press settings for my hardware buttons. Any fix for that?
Click to expand...
Click to collapse
Find ít in Evo settings please
dungphp said:
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
Find
Click to expand...
Click to collapse
AhmadKushairi said:
dungphp said:
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
Find
Click to expand...
Click to collapse
Sorry for my bad English. I want to say if not, it will be like Havoc, ...
Click to expand...
Click to collapse
[Pixel Experience] Works great :) But...?
Will there be future updates for pixel experience and is it going to be official?
Ecabott said:
Will there be future updates for pixel experience and is it going to be official?
Click to expand...
Click to collapse
I will update but official is no
Hi bro rom is good but the network signal is unstable...
Hey @dungphp. I can't pass from setupwizard on evox. I've tried configure with wifi and mobile data, and in both of cases, I had to force reboot because config stoped at PIN or email.
By the way, tks for building evox and PE. I really like both.
snacs said:
Hey @dungphp. I can't pass from setupwizard on evox. I've tried configure with wifi and mobile data, and in both of cases, I had to force reboot because config stoped at PIN or email.
By the way, tks for building evox and PE. I really like both.
Click to expand...
Click to collapse
Clean flash friend !
dungphp said:
Clean flash friend !
Click to expand...
Click to collapse
Yes, clean flash with official TWRP. Factory reset -> advanced -> wipe dalvik, system, data, cache -> install rom -> reboot. At night I do again and grab logcat.
snacs said:
Yes, clean flash with official TWRP. Factory reset -> advanced -> wipe dalvik, system, data, cache -> install rom -> reboot. At night I do again and grab logcat.
Click to expand...
Click to collapse
Have you used any Q rom with TWRP office yet?
dungphp said:
Have you used any Q rom with TWRP office yet?
Click to expand...
Click to collapse
Yes. I'm now using MSM Extended v6
snacs said:
Yes. I'm now using MSM Extended v6
Click to expand...
Click to collapse
Get logcat here. But I think other people flash this rom no matter what, you ask more from those people.
How many Kenzo versions are there? Is the system capacity of 2 Gb?