Related
Here is what I had to do to get ROOT on Lollipop.
-
Upgrade to Lollipop ( I did it the ODIN method but shouldn't matter if you do OTA)
- ODIN Flash CF-AutoRoot from the first thread. http://forum.xda-developers.com/show...34&postcount=1
- Let Device Reboot
- Go to Download Mode Again
- ODIN flash the latest TWRP. http://twrp.me/devices/samsunggalaxytabs105.html
- Let device reboot.
- Download latest SuperSU here and store it in your device. http://download.chainfire.eu/696/Sup...erSU-v2.46.zip
- Go into Recover by Power+Home+Volume Up.
- Instal the SuperSU zip you downloaded.
You should be good.
Took me a while to get this figured out so just sharing what i found.
If this helped please hit the thanks button.
dadanepal said:
Here is what I had to do to get ROOT on Lollipop.
-
Upgrade to Lollipop ( I did it the ODIN method but shouldn't matter if you do OTA)
- ODIN Flash CF-AutoRoot from the first thread. http://forum.xda-developers.com/show...34&postcount=1
- Let Device Reboot
- Go to Download Mode Again
- ODIN flash the latest TWRP. http://twrp.me/devices/samsunggalaxytabs105.html
- Let device reboot.
- Download latest SuperSU here and store it in your device. http://download.chainfire.eu/696/Sup...erSU-v2.46.zip
- Go into Recover by Power+Home+Volume Up.
- Instal the SuperSU zip you downloaded.
You should be good.
Took me a while to get this figured out so just sharing what i found.
If this helped please hit the thanks button.
Click to expand...
Click to collapse
I can confirm that this process does work. It's the method I went through when I upgraded my Tab S.
Tbh that is a long winded way to achieve something much easier. The Cf-autoroot step was totally unnecessary. It only does what the supersu zip does or twrp does itself.
Just flash TWRP from the first post. It will root your device with the latest binary.
http://forum.xda-developers.com/galaxy-tab-s/development/test-twrp-2-8-60-recovery-mod-t3066372
ashyx said:
Tbh that is a long winded way to achieve something much easier. The Cf-autoroot step was totally unnecessary. It only does what the supersu zip does or twrp does itself.
Just flash TWRP from the first post. It will root your device with the latest binary.
http://forum.xda-developers.com/galaxy-tab-s/development/test-twrp-2-8-60-recovery-mod-t3066372
Click to expand...
Click to collapse
Thanks for the update. Are you going to keep up with every new SU updated binaries and update TWRP every time the binaries are update. That would be great if you are willing to do that. I rather rely on the actual TWRP and SuperSU Developers to give me the zips etc. and flash my self as long winded as that may seem but people can choose.
Twrp is updated more often than the super su binary, but team win never seem to update the binary, so I'll just update it myself with each release. Not only that, each new twrp release has the same problems as mentioned in my original post.
I'm also looking for a way to get MTP working properly as that is the only issue now.
Regarding cf-autoroot. I don't think people realise there is nothing special about how it roots.
It basically does the same thing that twrp does itself or flashing a super su zip.
Cf-autoroot simply installs a modified stock recovery which runs a script to Install root then flashes back stock recovery.
If someone intends to install a custom recovery anyway then there is no point in running cf-autoroot.
Twrp will do exactly the same thing and so does installing a super su zip.
They all accomplish the same thing using a slightly different method.
The only difference will be that chainfire may keep each cf-autroot updated with the latest binary.
The reason chainfire created it is for people who want to stick with stock recovery instead of custom
ashyx said:
Twrp is updated more often than the super su binary, but team win never seem to update the binary, so I'll just update it myself with each release. Not only that, each new twrp release has the same problems as mentioned in my original post.
I'm also looking for a way to get MTP working properly as that is the only issue n
So i tried the auto root no luck, what mode do i flash twrp in odin?
Click to expand...
Click to collapse
deno24 said:
ashyx said:
Twrp is updated more often than the super su binary, but team win never seem to update the binary, so I'll just update it myself with each release. Not only that, each new twrp release has the same problems as mentioned in my original post.
I'm also looking for a way to get MTP working properly as that is the only issue n
So i tried the auto root no luck, what mode do i flash twrp in odin?
Click to expand...
Click to collapse
Mode? Just load it and flash it.
Click to expand...
Click to collapse
ashyx said:
deno24 said:
Mode? Just load it and flash it.
Click to expand...
Click to collapse
yeah in AP mode?
im trying to root this
Click to expand...
Click to collapse
deno24 said:
ashyx said:
yeah in AP mode?
im trying to root this
Click to expand...
Click to collapse
That's the one.
Click to expand...
Click to collapse
ashyx said:
deno24 said:
That's the one.
Click to expand...
Click to collapse
cool so i flash twrp and ill have root? been a cpl oif years since ive done this last root was note2
Click to expand...
Click to collapse
Just flash twrp, boot into it then hit reboot. Twrp will give you the option to root.
If doesn't then you are already rooted and probably just need to update the super su app.
ashyx said:
Just flash twrp, boot into it then hit reboot. Twrp will give you the option to root.
If doesn't then you are already rooted and probably just need to update the super su app.
Click to expand...
Click to collapse
I did that and I can't boot into twrp, samsung recovery is shown. Looks like it can't rewrite the original recovery. Used your version from 30th March with Odin 10.6.
Thanks
d3xtr0 said:
I did that and I can't boot into twrp, samsung recovery is shown. Looks like it can't rewrite the original recovery. Used your version from 30th March with Odin 10.6.
Thanks
Click to expand...
Click to collapse
That's a feature of lollipop. It overwrites with stock recovery. Happens on many devices. You need to boot into recovery immediately after flashing twrp, twrp will then patch it so stock recovery can't replace it.
When flashing uncheck auto reboot in odin. When it finishes flashing hold power + vol down + home. As soon as the screen goes blank hold power +vol up + home to boot into recovery.
Thanks for the information, but now I've flashed your new package root+twrp and it's working great
Thanks again.
Sent from my MI 4W
Whith this method, what is the knox value?
Knox is one ( .. )
Newer thread opened yesterday.
Edit:
http://forum.xda-developers.com/showthread.php?t=3079488
[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805 [Tab S 10.5 ]
Sent from my MI 4W
Hi,
I'am failing to update SU binary. Tried flashing through TWRP, tried normal and scripted variant but it just fails and still shows that i need to update SuperSU binary. I have root because I'am able to allow root access to apps and ADB through developer settings, but I can't manage to get SuperSU working. And if I try to do scripted variant, not normal, then I even get bootloop for some reason. I even tried full wipe and step by step getting SuperSU working but still nothing.
I need to mention that in the logchat after flashing SuperSU zip, in one part it says:
*****Boot image patcher*****
- Finding boot image
--- Boot image: /dev/block/mmcb1k0p33
- Extracting ramdisk
- Decompressing ramdisk
--- Failure, aborting
Maybe there's some indicator of whats wrong ? I don't really know.
More info:
Moto X2 XT1092(latest victara nightly), TWRP(twrp-3.0.2-2-victara.img), tried flashing SuperSU(UPDATE-SuperSU-v2.76-20160630161323).
I hope somebody can help,
Thanks.
KabalLV said:
Hi,
I'am failing to update SU binary. Tried flashing through TWRP, tried normal and scripted variant but it just fails and still shows that i need to update SuperSU binary. I have root because I'am able to allow root access to apps and ADB through developer settings, but I can't manage to get SuperSU working. And if I try to do scripted variant, not normal, then I even get bootloop for some reason. I even tried full wipe and step by step getting SuperSU working but still nothing.
I need to mention that in the logchat after flashing SuperSU zip, in one part it says:
*****Boot image patcher*****
- Finding boot image
--- Boot image: /dev/block/mmcb1k0p33
- Extracting ramdisk
- Decompressing ramdisk
--- Failure, aborting
Maybe there's some indicator of whats wrong ? I don't really know.
More info:
Moto X2 XT1092(latest victara nightly), TWRP(twrp-3.0.2-2-victara.img), tried flashing SuperSU(UPDATE-SuperSU-v2.76-20160630161323).
I hope somebody can help,
Thanks.
Click to expand...
Click to collapse
I am also getting the same message... But I am using htc desire 820U. I guess our problems are the same .... Hope someone here helps us
Why should you use SuperSU when CM integrates root in dev settings?
Flipz77 said:
Why should you use SuperSU when CM integrates root in dev settings?
Click to expand...
Click to collapse
The hashtag root indicator wont be in status bar when i have my SuperSU working and there are multiple apps not working since my SuperSU is not up (Substratum, layers theme and more)
Are you trying to use layers with cm?
Same problem here. Same cellphone too, I tried to install SuperSU because a lot of apps don't work even garanting root access.
Flipz77 said:
Are you trying to use layers with cm?
Click to expand...
Click to collapse
Yes and it doesn't work without SuperSU and substratum too. Clean master power clean doesn't work too. I tried full unroot, then flashed root.boot image and right after that i flashed SuperSU 2.78 zip. No errors in logcat but bootloop after that.
I should have been clearer from the start... CM doesn't support layers/substratum. You have to use their Theme Engine if you want themes.
Hi,
Android 7.0 is coming (rumors said this Christmas) :
link
link2
Update is alive: http://community.umidigi.com/thread-5751-1-1.html
But got many problems saving files son internal SD and the bartery is draining fast. LTE is working good.
nougat on umi plus
mafury said:
Update is alive: http://community.umidigi.com/thread-5751-1-1.html
But got many problems saving files son internal SD and the bartery is draining fast. LTE is working good.
Click to expand...
Click to collapse
my experience is very good .ive rooted the phone and flashed also adblock gps is working good internet very fast lte for the price just amazing
After Update Bootloop
After the 7.0 Update, i have an issue. If my Umi Plus is connected to my WLAN AP (with other devices no such error), it is rebooting every 10 seconds. If i turn my Access Point off, it stops rebooting itself and if i turn it on again, it is restarting after 5 seconds over and over again. My mobile carrier internet works fine, without any such errors.
I dont want to use my mobile carrier with limit, but my home wlan.
Anyone has similiar issues? If anyone knows the solution please write it
Preisschild said:
After the 7.0 Update, i have an issue. If my Umi Plus is connected to my WLAN AP (with other devices no such error), it is rebooting every 10 seconds. If i turn my Access Point off, it stops rebooting itself and if i turn it on again, it is restarting after 5 seconds over and over again. My mobile carrier internet works fine, without any such errors.
I dont want to use my mobile carrier with limit, but my home wlan.
Anyone has similiar issues? If anyone knows the solution please write it
Click to expand...
Click to collapse
Use flashtool to reflash firmware.
New UMI Super Android 7.0 beta update
New UMI Super Android 7.0 beta V7.01_20170114 update
Flashing through SP Flash Tool.
Camera, flash LED and on-screen buttons fixed!
The list of known bugs:
The camera still needs some adjustments
No standby Harlequin LED (only basic notification LED settings)
Other minor bugs
ROM link(UMi_SUPER_Android_N_beta_20170114_c239v55_kw_u1.rar):
mediafire.com/file/hpzw37aca481bvc/UMi_SUPER_Android_N_beta_20170114_c239v55_kw_u1.rar
SPFT link (SP_Flash_Tool_v5.1648.rar):
mediafire.com/file/2g6qau85a7fvnjq/SP_Flash_Tool_v5.1648.rar
Original post:
community.umidigi.com/thread-6169-1-1.html
Aditional IMPORTANT update info:
community.umidigi.com/thread-5265-1-1.html
Sorry, I can't attach links
This version should be stable with the mentioned minor bugs but please, post your feedback to check the correct performance, if there is any issue found, let us know!
Dora te quierooooooooo
So far so good. Android 7 has made a big improvement to my Super.
Does anyone know if root is possible with this beta and / or whether there's a version of TWRP that will work with it?
Thanks,
Steve
steveharman said:
So far so good. Android 7 has made a big improvement to my Super.
Does anyone know if root is possible with this beta and / or whether there's a version of TWRP that will work with it?
Thanks,
Steve
Click to expand...
Click to collapse
Root is possible using TWRP 3.0.2 for umi.
I've attached a zip file of the TWRP version below, unzip it and flash using SPT flashtool, you need to untick all the other boxes and just tick the recovery and direct it to where you unpacked the zip file.
I've also attached the Super su i used to root the beta 2 for the umi super. Flash it in TWRP.
Brilliant, thanks for that @Creedo4Life.
Can you remind my poof befuddled brain please - does flashing TWRP / recovery wipe the device? I should know this but can't remember.
Thanks again.
Steve
steveharman said:
Brilliant, thanks for that @Creedo4Life.
Can you remind my poof befuddled brain please - does flashing TWRP / recovery wipe the device? I should know this but can't remember.
Thanks again.
Steve
Click to expand...
Click to collapse
No worries. There's no need to wipe anything after you flashed Supersu in TWRP. One of the best things about Nougat 7 is that it use a different file system then Lollipop and Marshmallow, so you will never again sit and wait while the OS optimize apps (sometimes hundreds if you had a lot of apps installed!!) Just reboot after flash and you good to go. The first boot might bootloop once or twice, no need to do anything it will di everything on its own. Enjoy full root mate.
Creedo4Life said:
No worries. There's no need to wipe anything after you flashed Supersu in TWRP. One of the best things about Nougat 7 is that it use a different file system then Lollipop and Marshmallow, so you will never again sit and wait while the OS optimize apps (sometimes hundreds if you had a lot of apps installed!!) Just reboot after flash and you good to go. The first boot might bootloop once or twice, no need to do anything it will di everything on its own. Enjoy full root mate.
Click to expand...
Click to collapse
Quick question - I've only flashed recoveries using adb before, how do I point SPFlashTool at the recovery .img file?
Do I replace the recovery.img file inside the UMI ROM folder, with the TWRP .img file?
And then tick 'Recovery' inside SPFlashTool per your instructions?
Thanks,
Steve
steveharman said:
Quick question - I've only flashed recoveries using adb before, how do I point SPFlashTool at the recovery .img file?
Do I replace the recovery.img file inside the UMI ROM folder, with the TWRP .img file?
And then tick 'Recovery' inside SPFlashTool per your instructions?
Thanks,
Steve
Click to expand...
Click to collapse
That's correct, you browse the img file on the ticket recovery (the only one that should be ticked.) click on "download only" while your phone is switched off and then connect it through the usb. It will then flash TWRP and let you know when its done. Now disconnect your phone and hold in power button and volume up simultaneously. When you see the umi logo let go of the power button but keep holding volume up. When you see the TWRP logo you can let go. The first time you boot into TWRP you need to swipe the bar which will allow modifications, you will only have to do that once, the system will then remember it. Good luck and happy rooting.
Thanks.
Hmm, this is odd though. I managed to get TWRP flashed but whenever I flash that SuperSU and reboot, all my apps complain and keep quitting when I try to launch them. I've been careful to wipe cache after flashing, as usual.
In fact I've rried wiping everything cache, dalvik, - even started again from an entirely factory-wiped device, including data.
Flashed a fresh copy of the Nougat beta ROM, booted up fine. Flashed TWRP, booted up fine but then I reboot to recovery, flash SuperSU and bingo - on my next reboot all the apps starts complainin that they have stopped - even Launcher.
Weird...
Steve
steveharman said:
Thanks.
Hmm, this is odd though. I managed to get TWRP flashed but whenever I flash that SuperSU and reboot, all my apps complain and keep quitting when I try to launch them. I've been careful to wipe cache after flashing, as usual.
In fact I've rried wiping everything cache, dalvik, - even started again from an entirely factory-wiped device, including data.
Flashed a fresh copy of the Nougat beta ROM, booted up fine. Flashed TWRP, booted up fine but then I reboot to recovery, flash SuperSU and bingo - on my next reboot all the apps starts complainin that they have stopped - even Launcher.
Weird...
Steve
Click to expand...
Click to collapse
That's very odd. I used the exact same supersu myself and never encountered that problem. That version is also compatible with Nougat. Try one of the other versions on https://www.chainfire.eu/
Maybe that solves your problem.
Creedo4Life said:
Root is possible using TWRP 3.0.2 for umi.
I've attached a zip file of the TWRP version below, unzip it and flash using SPT flashtool, you need to untick all the other boxes and just tick the recovery and direct it to where you unpacked the zip file.
I've also attached the Super su i used to root the beta 2 for the umi super. Flash it in TWRP.
Click to expand...
Click to collapse
I follow this procedure but I only obtain partial root. I cannot cut and paste in the system partition even though I can run some apks that require root. Is there a way I can obtain full root?
[email protected] said:
I follow this procedure but I only obtain partial root. I cannot cut and paste in the system partition even though I can run some apks that require root. Is there a way I can obtain full root?
Click to expand...
Click to collapse
You have full root, you just don't know it.
If you want to edit anything in any system folders you need to change r, rw permissions. I use file explorer for this. Look at the attached SS to understand what I mean.
TWRP Install
Hi,
I'm on 3.02-20161121 version and my phone is rooted: may I flash Nougat via TWRP, instead of using SP Flashtool?
Thanks
pollock49 said:
Hi,
I'm on 3.02-20161121 version and my phone is rooted: may I flash Nougat via TWRP, instead of using SP Flashtool?
Thanks
Click to expand...
Click to collapse
No, you need to flash beta 2 using SPFT, there is no zip file to use with TWRP for this.
http://community.umidigi.com/thread-6169-1-1.html
steveharman said:
Thanks.
Hmm, this is odd though. I managed to get TWRP flashed but whenever I flash that SuperSU and reboot, all my apps complain and keep quitting when I try to launch them. I've been careful to wipe cache after flashing, as usual.
In fact I've rried wiping everything cache, dalvik, - even started again from an entirely factory-wiped device, including data.
Flashed a fresh copy of the Nougat beta ROM, booted up fine. Flashed TWRP, booted up fine but then I reboot to recovery, flash SuperSU and bingo - on my next reboot all the apps starts complainin that they have stopped - even Launcher.
Weird...
Steve
Click to expand...
Click to collapse
I have a similar problems. However in my case many of the apk still working include play store. Just the apks that needs internet quit working.
Creedo4Life said:
Root is possible using TWRP 3.0.2 for umi.
I've attached a zip file of the TWRP version below, unzip it and flash using SPT flashtool, you need to untick all the other boxes and just tick the recovery and direct it to where you unpacked the zip file.
I've also attached the Super su i used to root the beta 2 for the umi super. Flash it in TWRP.
Click to expand...
Click to collapse
Hello,
I have the problem that SPFT shows me 100% wehn I am flashing TWRP to the UMI Super but still hangs at 100% and does nothing more.
I'm using the Android N V7.01_20170123.
I also tried an Android scatter from Android 6 before I flashed Android 7, but it also doenst work.
Hi,
I found it on web and i don't really remember from where i got it but its not my work so all credits to whom so ever it may be concerned.
##Please proceed at your own risk, i am note responsible for any damage to your device or any data loss.
Below is a zip file that will root nearly any version of MIUI on Redmi Note 4g.
Tried and tested on miui 7 & 8.
##Need Someone to test on MIUI 6##
Its a superuser flashable zip rooting file for Redmi Note 4g only.
https://drive.google.com/file/d/0B8CWcCKLg4hraUZXMDVLc050TWM/view?usp=drivesdk
**To Root**
Please make a backup of your data before starting to root your device.
Recommended: Do not connect to any internet network such as wifi,gprs,3G/4G...
to avoid update searching issue till the process is over.
1)Download the above rooting .zip file from the above URL and save it into your internal/external SD Card(Recommend in your internal SD Card).
2) Now open Updater App of MIUI and open options.(3 dots in the right at the top)
3) Now choose the option "Choose Update Package". Now the file manager will get open.
4)Locate the .zip file that you downloaded in the file manager and click on it(For MIUI 8: After clicking on the file it gets selected and then click on ok).
5)Wait for the process to get over. Phone will restart and you will see the superuser app installed now.
6)Now open the app and a pop up will come to update su.Click on Ok and in that select Normal/CWM or TWRP as per the recovery you have installed on your device.
7) That's it now your device is successful rooted.
##Note: Its not a native root.
**To UNROOT**
1)Just Open The SuperSU App
2)Click on Settings. Then, click On Full Unroot option.
3)Then Click Continue, and the unrooting will begin.
4)After a reboot, your phone should be clean of the root.
I used KINGRoot. Just download the APK and run. So far no any issue seen
Schuan said:
I used KINGRoot. Just download the APK and run. So far no any issue seen
Click to expand...
Click to collapse
Ya its an alternative method to it but using kingroot my experience is not good.
It couldn't not help to fully unroot my device also if i needed to use super su it gave me problem.
If it's working for u then its well and good but if u like super su more then u can use the above method.
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Vivek Kantesaria said:
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Click to expand...
Click to collapse
Give a try to the method that i have mentioned...
Sry for late reply
nrathod3 said:
Give a try to the method that i have mentioned...
Sry for late reply
Click to expand...
Click to collapse
Okay brother not an issue
Vivek Kantesaria said:
Okay brother not an issue
Click to expand...
Click to collapse
Did it work for you?
nrathod3 said:
Did it work for you?
Click to expand...
Click to collapse
Yes then i flashed twrp and RR :angel:
Vivek Kantesaria said:
Yes then i flashed twrp and RR :angel:
Click to expand...
Click to collapse
Cool
iT may cause your phone no reaction while connecting to The Pc if you use The latest supersu version on supersu official website. I prefer phh's superuser . I rooted my mido perfectly With it.
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Is the file size 2.81 MB only?
Phone stuck/ Damaged
Im also having same problem.
After flashing Su, it asked for reboot. When i reboot, it is stuck in MI logo and not restarting. i observed this for more than 10 hrs. When i tried to start with recovery, again it is stuck is FASTBOOT screen and not progressing. My phone is not usable now. Please help
aadison said:
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Click to expand...
Click to collapse
How can i root my Xiaomi Redmi Note 4G with PC. Only fastboot mode is showing in my phone, no other option is coming.
Hi,
anyone tried to flash TWRP 3.1.0? https://dl.twrp.me/vienna/
Maybe succesfully rooted the P9+ with it?
Regards
Flashed on B360 but still unable to enter TWRP Recovery, just stuck on bootscreen "Your device has been unlocked..."
//Niklas
Any update for successful root ?????
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
nikjensie said:
FYI.... I'm on L29C636B362 and have full root, however I'm struggling to exchange the emojis to iOS 10.2 as I can't stand the android ones...
I used the EVA TWRP 3.1.0 and it works fine with the latest phh SuperUser ZIP and binary.
//Niklas
Click to expand...
Click to collapse
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Grlschia said:
Hello nikjensie, a favor I want to ask if you can post the procedure for granting that you made and the files you've used, because I on a P9 Plus VIE-L09C02334 have failed to have the root conn new TWRP, despite having tried to use latest SuperSu files, from 2.78 to 2.79. Thanks in advance and hope you can help me. See you soon
I hope that you understand their English translation.
Click to expand...
Click to collapse
Did you try to root using phh SuperSu?
cmexec said:
Did you try to root using phh SuperSu?
Click to expand...
Click to collapse
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Grlschia said:
No, can you give me the link or if there is any thread on the forums. I did the phone unlocked, loaded the new TWRP and then I tried to load the various SuperSu, with negative results. In fact, failing to have the root are returned to the previous version of Andorid (Marshmallow).
Click to expand...
Click to collapse
Wich TWRP did you used? im stuck in "your device is booting"
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
That downloaded from this link:
This https://dl.twrp.me/vienna/twrp-3.1.0-0-vienna.img.html of this link has blocked me too the phone. I reverted to another version that I downloaded through a link I always found on this forum, that I can not remember.
P.S.: Sorry if you copied it is not, just I find the load. Thank you
L29C636B362 wont boot to TWRP recovery...
matagatoz said:
Wich TWRP did you used? im stuck in "your device is booting"
Click to expand...
Click to collapse
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
cmexec said:
A previous poster said he used TWRP 3.1.0 for the P9 (EVA). I just tried that version, and although it seems to flash ok via fastboot, a boot into recovery does not advance past the "Your device is booting now..." screen. :crying:
Click to expand...
Click to collapse
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Grlschia said:
Go with the phone in bootloader and through the tool Universal_Fastboot_And_Adb_Tool loads the file that you find in this mega folder: mega:#fm/n5JlDJbT I shared. See that the language is Chinese and English.
You can also install it with command-ADB Fastboot if you back better.
Click to expand...
Click to collapse
im unable to open that mega folder can you re-share it ?
Try it: pan.baidu.com/s/1nvqbYNR
All credits to [email protected]
matagatoz said:
im unable to open that mega folder can you re-share it ?
Click to expand...
Click to collapse
Excuse me, I have some problem for sharing, I fix just put the link to download.
jvelasco said:
Try it: pan.baidu.com/s/1nvqbYNR
Click to expand...
Click to collapse
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Hello, I too with the new TWRP I managed to back up and restore her, but miss the fact that we can have the rott. I tried to install the various 'SuperSu', 'phh superuser' and not least 'Magisk', not get anything good. Now I left clean, no bootloader unlocked and no TWRP. but its original recovery, waiting for some of the many programmers and modders are able to find a winning combination in order to have the root on our phone. One reason for the only backup I am using the app 'Backup Huawei' already installed it does its job very well, in qunto also saves the settings that we do. See you soon and good navigation and use with this amazing phone.
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
cmexec said:
Okay I installed the TWRP from this package and was able to boot into TWRP (3.03) recovery and change the language to english. I tested a nandroid backup and all seems to work fine. I was not able to install phh superuser. The install fails with: "Updater process ended with Error 1". I guess I am missing a crucial step in rooting Nougat on the VIE-L29C636 ROM?
Click to expand...
Click to collapse
You need to use the phh version r275...
//Nik
jvelasco said:
Maybe try this: pan.baidu.com/s/1i5qQfm1
Original post: club.huawei.com/thread-12226302-1-1.html
All credits to [email protected]
Click to expand...
Click to collapse
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
cmexec said:
Thank you for the response. I did use the same TWRP version from the linked site. It's actually v3.0.3. It installs and works fine; to the extent that I was able to successfully complete a nandroid backup in TWRP. However, when I tried to install phh Superuser r2.75 it fails with message "Updater process ended with Error: 1". Is it possible that I needed to uninstall/remove the previous root (SuperSu) that existed before I upgraded from MM to Nougat?
-Paul
Click to expand...
Click to collapse
root can be achieved with systemless root. i think the version is 2.79 found in the p9 forums. i rooted my p9+ with the latest nougat earlier today. twrp is now 3.1.0.