Cwm recovery not instaling - Verizon LG G2

Hello everyone I am using a lg g2 Verizon phone (vs980)
I tried to install cwm recovery tool many. Times but it doesn't install when I try to boot into recovery it boots into stock recovery. I have used rom manager,flashify and myuncletool to install it plz someone help me

Same here. I have tried flashify to install TWRP but somehow stock lollipop rom recovers the android recovery after reboot. I have searched around but unable to find a proper solution. If someone can help, would highly appreciate.

Related

[Q] Recovery won't boot into system

I got UB and recovery, Installed cm10.1
and i wan't to try camera mod for clear video
but after flash the zip
recovery wont boot into system
keep me in recovery
i on CWM touch recovery
help me how to past this recovery
tried to restore backup
tried to flash another rom
tried to wipe system+data+cache+mount system anything
still stucked on recovery
any help would be good
thanks in advance
At first please don't post links to your question in other threads.
You may have a soft brick due to the .zip you installed (may was corrupt). Search in the forum for installing .kdz (stock LG firmware) manually and do it. Then repeat the whole unlock etc and try it again.
Sent from my 4X HD via XDA Premium
You need to update recovery, you most likely flashed an old version since this used to happen to me on first releases of cwm

[N910C][TUTORIAL]TWRP Recovery on 5.1.1. (No root)

Hi guys Recently Samsung released 5.1.1 for our devices! So I decided to make a easy tutorial on how to install TWRP on our devices (unfortunately without root).
1. Download newest odin from Here!
2. Reboot to download mode.
3. Download this file TWRP RECOVERY
4.Flash it with AP option.
5. Done! Now You should be able to boot into TWRP Recovery.
Info
Can I restore my previous custom rom now?
Yes and no. I tried restoring two roms. AOSP and TW, aosp had a bootloop then successfully booted, and TW didn't seem to boot at all.
Does it root my device/Can I root my device now?
Nope, not yet. I tried to make a custom rom with root built in but it was stuck in a bootloop.
Why would I need this?
Well. Now You can restore Your rom, and flash other roms(Some may fail due to a newer bootloader).
Any bugs?
Sometimes first boot after flashing this recovery might bootloop, but just remove Your battery and turn on Your phone again.(Happened only once to me)
Click to expand...
Click to collapse
Yes... I did manage to restore the backup image of 5.1 as I ended up in bootloop while trying for the root access. So far OK with at least TWRP is working.
I have a question, If I'm on 5.1.1 and I've installed this TWRP, By using this TWRP RECOVERY, can I install 5.0.1 custom rom via zip file?
I do not mean to restore my backup rom. I mean I do a fresh installation
vodanhdaisu said:
I have a question, If I'm on 5.1.1 and I've installed this TWRP, By using this TWRP RECOVERY, can I install 5.0.1 custom rom via zip file?
I do not mean to restore my backup rom. I mean I do a fresh installation
Click to expand...
Click to collapse
Some people have reported issues flashing a 5.01 rom without using odin to downgrade first
Sent from my SM-N910C using Tapatalk
vodanhdaisu said:
I have a question, If I'm on 5.1.1 and I've installed this TWRP, By using this TWRP RECOVERY, can I install 5.0.1 custom rom via zip file?
I do not mean to restore my backup rom. I mean I do a fresh installation
Click to expand...
Click to collapse
It seems to bootloop roms that need 5.0 bootloader. But AOSP rom that runs on 5.1.1 boots up without any problems. Just during boot You might see message "kernel is not seandroid enforcing" and then the rom should boot up.
I flashed twrp via odin and it says pass then reboot after that when i try to enter recovery it get me to stock recovery any clue why is that and how to solve this ? v.v
Thanks a ton bro.
thank u so much guys
Not working
Hi there
I have tried it several times but didn´t work. It always come back to stock recovery. My N910C is on 5.1.1 non rooted.
Any hint ?
jefflryb said:
Hi there
I have tried it several times but didn´t work. It always come back to stock recovery. My N910C is on 5.1.1 non rooted.
Any hint ?
Click to expand...
Click to collapse
Just after installation goes into recovery mod before starting.. Do not let the phone boot
Thanks
Recovery & Kernel not seandroid reinforcing
Hi after i installed the custom recovery whenever i boot up and see the boot screen a red text shows up the top left corner of the screen that says recovery or kernel not seandroid reinforcing. Please help.
Which version of twrp is this?
after installing via of in twrp it fails to come up all I get is the standard recover
Hi I could really use some help here my phone had some trouble so I had to wipe it out and reinstall the 5.1.1 lollipop when I did so however I lost the recovery partition I was using TW RP I have since tried to reinstall it and Odin says that it is successful yet when I try to boot into the recovery partition I get to default recovery partition that comes with the phone I've also tried using the CWM recovery image and it does the same thing says its successful but I can't boot into it because it boots into the default one any idea what is going on and what I can do. I should also note that I've tried reinstalling the 5.0.1 version of lollipop and that has failed in Odin any ideas would be greatly appreciated because at the moment I have no way to root my phone I can't flash the custom kernel that's needed for 5.1.1 or anything else for that matter please help thank you
jereny.taylor6969 said:
Hi I could really use some help here my phone had some trouble so I had to wipe it out and reinstall the 5.1.1 lollipop when I did so however I lost the recovery partition I was using TW RP I have since tried to reinstall it and Odin says that it is successful yet when I try to boot into the recovery partition I get to default recovery partition that comes with the phone I've also tried using the CWM recovery image and it does the same thing says its successful but I can't boot into it because it boots into the default one any idea what is going on and what I can do. I should also note that I've tried reinstalling the 5.0.1 version of lollipop and that has failed in Odin any ideas would be greatly appreciated because at the moment I have no way to root my phone I can't flash the custom kernel that's needed for 5.1.1 or anything else for that matter please help thank you
Click to expand...
Click to collapse
Easiest way on odin is make sure auto reboot is unchecked. When its done unplug the cable pull the battery put it back in boot into twrp Let me know how it works out for you.
azizski said:
I flashed twrp via odin and it says pass then reboot after that when i try to enter recovery it get me to stock recovery any clue why is that and how to solve this ? v.v
Click to expand...
Click to collapse
keep pressing vol up + home + power as soon as u press start button............in odin
Should this be in any conflict with the kernel with http://forum.xda-developers.com/note-4/development/n910c-kernel-5-1-1-stock-tw-permissive-t3206548 ? When I try to use both, i end up in a bootloop
Backup please help
Guys do you have a Back-Up?a backup of lollipop 5.1.1 a backup from twrp can i have back up or any just a backup from recovery mode because my firmware 5.1.1 wont work the only that i know that works is a backup from recovery mode can someone give me a backup pleaseee thank you . sorry for my bad english :3
aejaz_ally said:
keep pressing vol up + home + power as soon as u press start button............in odin
Click to expand...
Click to collapse
This one worked. Thanks!

Installing Custom Rom on N7000

Hi All,
was trying to install cm11 and cm12 on n7000 bt it failed i had installed philwz custom recovery with that it gave me error
i had bricked my device bt now i have managed to install the stock rom
my device is rooted need help in installing cwm recovery so that i can install cm11 or cm12 or any other rom
how do i install cwm tried many ways.. need flash files to install it with odin
also i searched in forums bt am confused regarding kernal and all
Please need assistance
Thank u very much.
I think you're in the wrong section. anyway,
1. if you're still on stock recovery, try install Philz kernel(search in the forum) for your stock ROM, Install it using update function in the stock recovery.
2. reboot to recovery again, you'll have philz recovery (but it's outdated for flashing android KK and above ROM, but you have to install it first since it pass the stock recovery verification) then flash kernel that compatible with android KK n android L.
3. then reboot to recovery again, and finally install your cm11 or 12 ROM and the following Gapps they provide
I Tried that bt still not able to find the correct version for my mobile if you guide me for the proper link/ direct link i can provide all the information required
thanks
You can find it following this:
3.flash PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 (http://d-h.st/OTu) to get cwm recovery by using odin or mobile odin (To download click the blue Download now button)
hemanthemant300 said:
Hi All,
was trying to install cm11 and cm12 on n7000 bt it failed i had installed philwz custom recovery with that it gave me error
i had bricked my device bt now i have managed to install the stock rom
my device is rooted need help in installing cwm recovery so that i can install cm11 or cm12 or any other rom
how do i install cwm tried many ways.. need flash files to install it with odin
also i searched in forums bt am confused regarding kernal and all
Please need assistance
Thank u very much.
Click to expand...
Click to collapse
Here you can find "How to install" " The steps to install it from an stock samsung rom are:"
http://forum.xda-developers.com/galaxy-note/development/rom-t2938649
If you follow exactly the steps 1-7 you can install your desired rom in step 8
Hey thank u so much for the solution it worked now i am on cm11.. if u all suggest what is the best rom at present...?
Please I've tried d download link bt ain't working. Can someone help me out? Thanks in advance

LG L70 (MS323) - How to replace CWM with TWRP?

As the title suggests, I have an LG L70 (MS323) and I accidently installed CWM instead of TWRP. Because of this, a lot of the ROMS I am trying to install don't have complete functions installed, as I am currently running CWM 6.0.0.1, which seems to be an outdated version.
Since a lot of the ROMS recommend TWRP, is there any way to simply delete CWM, and install TWRP? I installed TWRP, and it worked for a while, but after a reboot, the device then went back to the normal CWM. I have no idea what to do here, and any pointers to fix this would be appreciated!

PLEASE HELP! Moto E5 Play [XT1920-18 PETTYL] freezes on logo

Hi, I'm new to this, could you help me?
I had a Moto E5 Play Pettyl, with custom recovery (TWRP).
I was testing ROMS and then I went back to the STOCK ROM, the problem is that it freezes at the logo, I had to install the stock rom from the pc because it gave me errors when installing it with TWRP (when installing the stock rom the recovery was installed original). I have tried some solutions but none works for me, such as wipe cache partition, start it in factory mode, or factory reset.
If you help me to install the STOCK ROM without problems it would be of great help
Hello, I also have this terminal (XT 1920-18). could you tell me the tutorial you followed to be able to be root user? what were the roms you tried? because I haven't found any, only variants and I really didn't dare to make modifications for the same reason. Apparently there is no development for this phone, I didn't even find a tutorial for debloater that inspires me the confidence to try it without having negative results. Thanks in advance
Use rescue & smart assistant tool from lenovo website
agusz.s said:
Hi, I'm new to this, could you help me?
I had a Moto E5 Play Pettyl, with custom recovery (TWRP).
I was testing ROMS and then I went back to the STOCK ROM, the problem is that it freezes at the logo, I had to install the stock rom from the pc because it gave me errors when installing it with TWRP (when installing the stock rom the recovery was installed original). I have tried some solutions but none works for me, such as wipe cache partition, start it in factory mode, or factory reset.
If you help me to install the STOCK ROM without problems it would be of great help
Click to expand...
Click to collapse

Categories

Resources