Hi.
I'm just wondering if anybody can help me please?
I have a UK Huawei P9 EVA-L09 with Marshmallow currently on it (B166) build I think. It is unlocked and has TWRP 3.0.2.0 Recovery installed on it.
I would like to upgrade to Nougat 7.0 and EMUI 5.0, but most of my attempts have failed and I have had to use the rollback method to get back to Marshmallow.
I have tried to do it by flashing an Update.zip and subsequent EU_Apps package.zip through TWRP to no avail.
I have also tried the 'Dload' folder method, also to no avail. The closest I've gotten is to build no B378, but it shows up as NRD90M Test-Keys on the Build No in the phone settings instead and all apps such as camera, NFC, Bluetooth are missing / not working etc. Trying to then flash the EU_Apps package through 'Dload' method doesn't alleviate the problem of missing apps.
Does anybody have any tips for what I could try to get it onto a working Nougat build with apps please?
Also, if anybody has any links to any relevant firmware etc, then that would be very helpful too.
I'm pulling my hair our trying to get this to work. Surely it's can't be that hard can it??
Many thanks, Bill.
Is your phone branded? For a particular UK network I mean? And if so are you flashing ROMs for that network?
I don't know if that's the problem but I was on Vodafone UK B137 (which is Marshmallow) and flashed the 2 update zips for a Vodafone Nougat ROM thru TWRP and it was successful. I then flashed an updated zip using the "dload method" and that was successful too.
When you say you flashed the zips in TWRP "to no avail", what exactly was the end result?
Also might help if you give the full version of your starting ROM, and what zips you were trying to flash, ie full names and sources.
I'm kinda new to this device forum but seems like people get varying results with different flashing methods, for no particular reason either!
Peace.
chris5s said:
Is your phone branded? For a particular UK network I mean? And if so are you flashing ROMs for that network?
I don't know if that's the problem but I was on Vodafone UK B137 (which is Marshmallow) and flashed the 2 update zips for a Vodafone Nougat ROM thru TWRP and it was successful. I then flashed an updated zip using the "dload method" and that was successful too.
When you say you flashed the zips in TWRP "to no avail", what exactly was the end result?
Also might help if you give the full version of your starting ROM, and what zips you were trying to flash, ie full names and sources.
I'm kinda new to this device forum but seems like people get varying results with different flashing methods, for no particular reason either!
Peace.
Click to expand...
Click to collapse
Hi. Thanks for your reply.
When I tried to flash .Zips through TWRP it kept coming up with errors and didn't flash them (something about being umnable to mount /System).
I was on EE UK, but found a method yesterday for debranding my phone and setting it to C432. I also managed to successfully flash C432B182 firmware on it.
I have since attempted to flash Nougat B360 using the 'Dload' method and now my phone keeps asking me to enter my password to decrypt storage. Multiple attempts to reset my phone and wipe cache partitian don't seem to be working. Do you have any idea how I can get around this?
It's so hard and it's so annoying how other people seem to be getting it right and mine is proving to be a swine. Makes me want to get rid of it to be honest and get something easier.
Thanks again, Bill.
I'm concerned that this may be bricked right now. No amount of using eRecovery to reset the phone will stop it from going onto the dreaded 'enter password to decrypt storage' screen! I will see if I can re flash it using Fastboot, but I'm a bit concerned right now...
I have an O2 Branded one. I'm too chicken to mess with it in case I brick it!
Just waiting for the official UK O2 OTA update to arrive &
tmohammad said:
I have an O2 Branded one. I'm too chicken to mess with it in case I brick it!
Just waiting for the official UK O2 OTA update to arrive &
Click to expand...
Click to collapse
Probably advisable unless you absolutely know what you're doing and don't mind taking the risk. I'm a bit annoyed with Huawei and my carrier, they are always so slow with providing updates and Hmui 5.0 is only what Hmui 4.0 should have been in the first place. I'm done with these manufacturer's stupid over bloated overlays and will be going to an official Google phone in future!
If you can get it into fastboot mode, flash TWRP, then you should be able to progress from there, hopefully by at least formatting data to get rid of the encryption! Sounds like.a royal pita tho to be honest.
When I flashed to Nougat from MM using TWRP I got a bunch of error messages too, but it (eventually) booted up ok....
chris5s said:
If you can get it into fastboot mode, flash TWRP, then you should be able to progress from there, hopefully by at least formatting data to get rid of the encryption! Sounds like.a royal pita tho to be honest.
When I flashed to Nougat from MM using TWRP I got a bunch of error messages too, but it (eventually) booted up ok....
Click to expand...
Click to collapse
Hi again all.
Success! I finally managed to crack it.
I downloaded MM Firmware version C432B136 and used Huawei Extractor to extract the Boot.img, Recovery.img and System.img files and was able to boot into Fastboot mode fortunately. I used a Command Prompt to unlock the Bootloader again and flashed each .img file in line.
The phone booted up into the B136 firmware and I was then able to update OTA to B166, but not B182 strangely. So I downloaded a B182 version firmware and placed it in the 'dload' folder of the phone's S.D Card, before forcibly flashing it by holding volume up, volume down and the power button on boot up.
I subsequently used the below link, which showed me how to use Huawei Updater and HiSuite to update to B361 firmware.
https://forum.xda-developers.com/showpost.php?p=70594380&postcount=2
Once on Nougat B361 firmware, my phone's update setting prompted me to update to the latest B378 firmware OTA.
Finally, to achieve Root status I followed the below guide and am now running root with SuperUser and BusyBox installed. I'm happy to report that both Nougat 7.0 and HMUI 5.0 are running smoothly on my phone and all features are working (i.e. Bluetooth, Camera and NFC) and performance and battery life are all noticeably better than ever.
https://forum.xda-developers.com/showpost.php?p=70927601&postcount=456
Be aware that my phone is EVA-L09, so I followed all guides and downloaded all firmware that related to my specific phone model.
Phew! Thanks for all of your help and good luck to those who are attempting to get this working.
Bill.
Hi guys, I am only a very junior user who randomly flash his phone but most of the time I want my phone to be stable for work. I have had the situation since the recent OTA available, suffered a lot, would like to seek any help or advice.
I have a L09C635B361, Japan version. I updated to Android 7 via OTA, then unlocked / rooted under the instructions in this forum, forgot which exact thread though. Never thought of flashing any customized rom so I haven't realized the update problem until the recent OTA update (from B361 to B382) released. I got the push, downloaded B382 OTA package, restart to TWRP, then the flash was failed in TWRP screen. Restart again, the system notified there was a recent update failure. Then I installed Firmware Finder, downloaded the 3 update zip files, restart back to TWRP, still failed installing. Please refer to the failure screenshot for detailed reson. I have no idea what it said and how I should do differently.
No other way to go, I backed up my system, then wiped my phone, reset to factory mode, but brand new system was very strange: only voice input, no keyboard, missing several key functions such as camera. So I have to restore to my previous system, everything worked well except I can't open "clock".
Right now I am looking at system notification of B382 all the time, but I can't figure out how to get it updated, I don't mind if there's a way enables me go back to stock rom, but it's really hard to find the stock firmware for C635......
Thanks, appreciate your help in advance.
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
xMrTROLLIPOPx said:
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
Click to expand...
Click to collapse
Thanks bro. I will try the entire process when I have a backup phone.
One more thing is when I first tried to wipe phone, failed for several times. Plus the TWRP flashing error, I have suspect that there's something wrong with my partition information or format error. Can anyone help me to eliminate the possibility by the screenshot please?
On the other hand, I found 3 zip files on Firmware for same version update. Which one should I flash? If I need to flash all of the 3, is there a sequence?
The screenshot for the 3 zip files.
oushouseki said:
The screenshot for the 3 zip files.
Click to expand...
Click to collapse
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
lostunsunghero said:
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
Click to expand...
Click to collapse
Well, it ended up with paying 20USD to some "pro"s on taobao.com to unbrick my P9...sigh...am I too old to do this :crying:
Hi,
Sorry of this is a bit of a newbie question but:
What is the purpose of each of the 3 different update zip files ?
And do I have to apply them all - and in what order ?
In my case, I am about to update to B389, and I have downloaded 3 files for VIE-L29C636B389 (currently on VIE-L29C636B130), and I have an update.zip, an update_full_VIE-L29_hw_spcseas.zip and an update_data_full_public.zip.
I was planning on doing the first two by the dload method (with reboots in between), but the update_data_full_public.zip doesn't appear to have an update.app, so how do I load that ? (I do have TWRP on my phone, so could probably figure it out - eventually).
Cheers,
SZ
same question
I read somewhere that it should be flashed in that exact order. i'm guessing that is the same procedure as with auto OTA updates, except now we have rooted phones, so bye-bye to auto updates. I am currently on VIE-L29CB636B387 and i received an automatic Huawei notification of a new version (VIE-L29CB636B388) about a week ago. I tried to update to that version in System Update-Quick Update, but that didn't work (surprise!). There was no issue though as when I rebooted it just went back to 387. However, I now have a red "New Version" notification in my System Update. Please tell me how your upgrade went if you went ahead and flashed 389. I have the three files already from filefinder, i also have TWRP and/or I could use adb fastboot to install. Thanks in advance.
Hey,
I am not sure I want to proceed on the basis of something that somebody 'read somewhere' ....
Anyhow - I've not run these updates yet, as I wanted to backup my phone first, but TWRP keeps blowing up with an error in the middle of the backup, so I am not going to try anything until I get to the bottom of that.
Will let you know if/when I ever go ahead!
Cheers,
SZ
Hi,
TWRP blowing up during NAND backups? thats not a good thing. Upon the advice of a forum member (xzanium) I flashed TWRP 3.1.1-1 instead of TWRP-3.2.1-0-vienna. No hitches so far, solid backups and no hiccups in flashing SuperSU, also got xposed to work seamlessly and other stuff. I hope you are able to resolve the issue you mentioned and get around to getting VIE-L29CB636B389 on your phone.
Well good luck to you, and post here any progress if you would.
SZ,
I have an idea on what the purpose of each of the 3 different update zip files are for and whether you have to apply them all - and in what order.
Since I could make a NAND backup using TWRP without issues, and there was an OTA update notice for an upgrade to VIE-L29CB636B388 which I couldn't upgrade to while rooted, I decided to unroot in order to upgrade to that. First i did the requisite steps - uninstalled the xposed framework and proceeded with the full unroot with SuperSU. Then I performed the dload method to flash the update.app that I extracted from the update.zip.
It was here where i hit a snag. What followed was, I found out that Huawei needs a verified stock rom, meaning it has to be a fullOTA-MF-PV in order that the bootloader could be relocked. So I tried my luck and downloaded the stock ROM VIE-L29C636B370 and flashed that. Success! From there, and several auto upgrades later I was back to L29C636B370. Reinstalling my Google account also locked back FRP. At this point i am full stock EMUI 5
Now, to answer your question. When I tried to upgrade to VIE-L29C636B388 via system update quick update. I only saw one file - update.zip therefore this must the only one needed for incremental patches. The same holds true with update_data_full_public.zip as I later learned when I decided to use the proxy upgrade method in MT filefinder . It applied a 2nd patch. The third file, namely, update_full_VIE-L29_hw_spcseas.zip was not required for this incremental update. In fact, the update process was cut short and an error message appeared that the file could not be located, even though i copied that to the HwOUC folder. It appears that this was deleted before the fullOTA update could finish during the incremental update process. Clearly, this last zip is not necessary for incremental updates. So this must be the package which delivers the rest of the ROM, or the parts of it that needs to be changed.
So, obviously what "I read somewhere" was legit. I hope that answers your question.
cheers!
mm
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel
Hi all! So, you have a P8 lite in your pocket and you hate EMUI? Well, that was my case too, it's uncustomizable, ugly, and removes plenty of features from android stock. I do not like it one bit, and I like even less the fact that this phone is getting no more updates, ever. This sucks, it all sucks, luckily we can say "F all that" and do whatever we want with this device, provided you follow this guide.
I am making this guide because I want to condensate every single thing I know about this device in one single thread. One big guide to help all of you out installing custom ROMs. Without this, you would have to do research along multiple threads, often with conflicting information, and what's even worse, DEAD LINKS! There's nothing more frustrating than finally finding the solution to your problem, just one download away, just to be greeted by a dead link, and you would need to scout for another file that may or may not work... ugly stuff.
So, the point of this is to bring up to date info so you can make this device rock. This guide assumes you have Huawei's EMUI 4.0 installed which runs on Android 6.0. I'm also assuming you have your bootloader locked, and I will explain how to unlock it FOR FREE. No need to pay to some shady site in order to access what effectively belongs to you.
These are the requirements for this guide:
Code:
#USB cable
#A PC
#Some charge on the device to ensure nothing goes wrong
#An SD Card
#Patience
Before beggining, a quick disclaimer:
Code:
#It's not my objective to break your device, however there's always a risk when doing these kind of things.
#When you follow this guide's steps your are accepting the risks and are taking full responsiblity for whatever may happen to your device.
#Don't blame me for breaking your stuff if that happens, all I'm listing here worked for me, and should work for you.
#I won't be babysitting anybody to help solve their specific problems, don't PM me asking me why X doesn't work.
#I am unaware if this works in other versions of this device, but I'm positive this works on both ALE-L23 and ALE-L21
#If you have a "CAM-XXX" device, it's highly likely this works for you too, but as with everything, TRY AT YOUR OWN RISK.
#YOU HAVE BEEN WARNED!
Ok, so let's begin. As the title says, the guide is applicable to any custom ROM. However, I will be installing Lineage OS 14.1 which runs on (almost stock) Android 7.1.2. Regardless, the final step where we install the custom ROM is interchangable, and you can use whichever you please.
This process WILL wipe all of your data (except SD card). Make sure to make a backup of everything you want to save (app configs, photos, videos and whatever else).
1. DOWNGRADING TO ANDROID 5
As you may know, Huawei has stopped providing bootloader unlock codes for very stupid reasons. This has led to many unable to unlock their bootloader and having to pay for third party apps in hopes they don't get scammed. There are some trustworthy sites where you can get these at a fee tho (mainly DC Unlocker at 4 bucks), so if you want to pay up to avoid having to downgrade to Android 5, you can do so. However, I understand that you may not want to pay at all, I didn't want to either.
To get the bootloader unlock code, we need root, and to get root, we need Android 5. Why? Because getting root in Android 6 requires us to flash some zips, and for that we need TWRP, and for that we need an unlocked bootloader, everyhing closes up very nicely. So, we have no choice but to downgrade.
An SD card is not needed for this process, but it is going to be required at a later point, so why not use it now too?
NOTE: It may be a good idea to make a factory reset at this point, to avoid issues. For that, do the following:
Turn your phone off.
Boot the phone by holding the power button and the volume up button at the same time.
Wait untill the Huawei logo appears, then let go of both buttons.
You should be in recovery mode, navigate with the volume keys to the "Wipe data/factory reset" option.
Select it with the power button and wipe everything.
Reboot the device with the option in the menu.
Once the device has booted up, follow the guide.
Alright, once that's done, connect your phone to the PC to transfer some files:
NOTE: There's two Stock Android 5s downloads ("HW_Android_5_Transition.zip" and "HW_Stock_Android_5.zip"). One is a transition package, as the name implies, and the other is Huawei's EMUI 3.1 in all of it's glory. What's the difference? The transition package is a much smaller file that is designed to downgrade the phone from EMUI 4.0 (Android 6) to EMUI 3.1 (Android 5). If you are running EMUI 4.0 (which should be the case) then you can use the transition package which will take less to download. If you have another version (i.e. EMUI 4.1) you should use "HW_Stock_Android_5.zip". However, the latter is the safe bet. If you are not sure which one to use, use "HW_Stock_Android_5.zip". The process is exactly the same for both packages.
Extract the "UPDATE.APP" file from "HW_Stock_Android_5.zip" or "HW_Android_5_Transition.zip".
Navigate to your phone's internal memory or SD card (whichever you want to use) and locate a folder called "dload". If there's not one, create it.
Put the "UPDATE.APP" file inside of the "dload" folder.
Turn your phone off.
Once it's off, press the power button and the two volume buttons until you see the Huawei logo.
That should make the phone recognize the "update" and start flashing it. Once it finishes, it will try to boot by itself, so pressing those 3 buttons was your last input until the phone boots into Android 5. It will take a long time for it to both finish and boot, don't be afraid, the phone is not bricked. If you think the phone is indeed bricked because it has been stuck at the logo screen for way to long (longer than an hour) then proceed to the "Unbricking" section of this guide. However, it's highly unlikely that this will happen, as Huawei checks the file before flashing it, so if it's incompatible with your device it should not do anything and boot again into Android 6 with everything untouched.
2. ROOTING ON ANDROID 5 AND EXTRACTING BOOTLOADER UNLOCK CODE
Once you are in Android 5, we will need to root the device. Download KingRoot (proved to work) or another one click root app of your choice. I'm aware of KingRoot's bad reputation because of the spyware accusations, but the phone will be wiped anyway and we are sure it works, so it doesn't really harm at all. If you still don't want to use it, check with other apps, I haven't done so myself so I don't know what else works.
Once your phone is rooted, we will need to use the terminal for the first time. We will need to setup ADB and Fastboot, if you already have that, skip this step.
Extract the "platform-tools" folder from the zip and place it somewhere nice.
Shift right click on a blank space INSIDE of the "platform-tools" folder.
Select "Open command window here".
This should be enough to get ADB working, but we need to make some config on the phone itself too.
Go to Settings -> About Phone
Look for a line that says "Build Number" and tap it multiple times.
When the message saying "You are now a developer" pops up, go back and enter the new "Developer Options" menu.
In there, look for an option called "USB Debugging" and turn it on.
Connect the phone to your PC via USB cable.
A message should have popped up on the phone asking for permission to use USB Debugging, tap on "Always allow from this PC" and then on "Allow".
NOTE: If the message doesn't pop up, you can try a number of things. I prefer to tap the "Revoke USB debugging authorizations" button to ensure that no PC is authorized, so the message must pop up at some point. Once you revoked authorizations, disconnect and connect the phone again, if you still don't see it, try to select MTP as the transfer protocol. If not, then PTP, if you still don't see it install Hi Suite on your PC and open it, it should pop up now.
Once you have everything working, type the following in the terminal in your PC:
Code:
adb devices
If you see a serial number there, that's your phone, and that means everything is set up correctly (make sure you don't have any other device attached to your PC, or you could confuse the two and make bad stuff happen for that other device). If you don't see it, make sure USB Debugging is enabled. You can try to use different cables if you still have problems. Now type:
Code:
adb shell
And then:
Code:
su -c "grep -m1 -aoE 'WVLOCK.{14}[0-9]{16}' /dev/block/mmcblk0p7 |grep -aoE '[0-9]{16}'"
KingRoot (or the app you used to root) should prompt you (in your phone) if you want to give ADB root access, make sure to allow it to make this work. This should give you your unlock code. SAVE IT INTO A TXT FILE AND COPY THAT FILE TO ALL OF YOUR PCS, ALL OF YOUR CLOUD ACCOUNTS AND ALL OF YOUR MOBILE DEVICES.
(Maybe the terminal gets stuck at this point, press CTRL + D (or C) to get it unstuck).
Seriusly tho, it didn't happen to me, but it is a possibility that your Bootloader can re lock after doing some of the things that follow, in which case you will need to unlock it again, and if you don't have that code... it's back to square one.
3. GOING BACK TO ANDROID 6
Now that we have done all that we wanted on Android 5, it's time to go back. The process is exactly the same.
Extract the "UPDATE.APP" file from the "HW_Stock_Android_6.zip" file and move it to the dload folder (SD card or Internal).
Turn off your phone and turn it on again with all three buttons pressed.
Wait.
???
Profit.
So, we're back on Android 6. Why did we go back you may ask? Why did we not just flash our precius custom ROM? Well, for once, this gives people the chance to stay on EMUI if all they wanted was to unlock the bootloader and maybe root on Android 6 (which I will explain how to do too, in case you want to). Another, more important reason, we need Android 6 to install the B895/B896 update, which is a requirement for any custom ROM (mainly Android 7.0+) if you don't want any problems with your SIM card (and others that may arise).
4. UNLOCKING BOOTLOADER AND FLASHING TWRP
Now, we need to turn on USB Debugging again, and to allow our PC... again. Do so, and check that everything is right with:
Code:
adb devices
If that's the case, then type the following:
Code:
adb reboot bootloader
Your phone will reboot, and you should see a white screen with a wasted android above a green text saying "PHONE LOCKED". If that's the case, take a moment to say goodbye to that green text, because it will soon turn very red. We will need to unlock the bootloader with the code you got from the previous steps, for that type the following:
Code:
fastboot oem unlock ****************
In place of the "****************" you must enter your code, of course. And that was it, now the green text is replaced with a red "PHONE UNLOCKED". This are good news. Now, we need to flash our custom recovery if we want to do anything fancy with the device. For that, extract the "recovery.img" file from the "TWRP_3.1.1.zip" file and paste it into the same folder where all of the ADB files are located (where "adb.exe" is). Now type:
Code:
fastboot flash recovery recovery.img
This will flash TWRP into your device, hooray! Now type:
Code:
fastboot reboot
And your device should turn back on, today is a bright day my son. Now you must take a decision, do you want to flash a custom ROM and get very nice and fancy features or do you want to stay with what you have? If you prefer Huawei's EMUI 4.0, then follow to the next step. If you want to flash custom ROMs, then skip the next one.
5. ROOTING ON ANDROID 6 (OPTIONAL)
I don't know why you would prefer EMUI over... anything else really, but it's your call. I'll tell you how to root it so you can at least take some advantage of it. You see that file called "HW_Android_6_Root.zip"? Extract it, inside there will be... another folder called Root... huh? Redundant. Anyway, inside of that there should be two zips. 1.zip and 2.zip. You will need to place the folder called "Root" inside of your SD card or your internal storage. Then, go back to the terminal and type:
Code:
adb reboot recovery
You should reboot into TWRP, isn't it nice? Anyway, we have to flash some zips! Go to "wipe" first and wipe the "Cache" partition and the "Dalvik" partition. Once that's done, go to install and navigate to the Root folder your placed... well, you know where. Select 1.zip and flash it, once it's finished reboot the device. If TWRP prompts you to install it's app, DO NOT DO IT. Once the phone has rebooted (it will take longer because of the cache and dalvik wipe), repeat the process but flash 2.zip this time, reboot and your phone should be rooted. This is the end of the line for you now, as you don't want to make anything else to the phone. However, you can go to the final chapter where I explain how to install Xposed framework, if you want more customization. EMUI doesn't like Xposed very much, so there's little you can do with it, but it's something I guess.
6. INSTALLING THE B895/B896 UPDATE
So, you followed the power user path, the one we all really want deep down. That's cool, I respect you. We gotta use that custom recovery we just flashed, but first we need to transfer some files into our phone's memory. We need to install an update to the phone, for which you need Android 6 (that you should already have anyway). There's two different updates, B895 and B896. As you may guess, B896 is newer. However, any of these two will (or rather should) work without issues. I personally used B896, but some people claim B895 is more stable. I can't find a difference really, but the process is the same regardless of which you choose. Once you have made that decision, move "B895_update.zip" or "B896_update.zip" to your phone's internal storage or SD card AS IS (don't extract it). Then type into the terminal:
Code:
adb reboot recovery
You should be in TWRP now. Go to wipe and select the "Cache" and "Dalvik" partitions ONLY, then wipe them. Once that's done, go to install and flash your update of choice. Once finished, reboot the device. If TWRP prompts you to install it's app, DO NOT DO IT. The boot should take longer than usual because of the "Cache" and "Dalvik" wipe... and because of the update too. Once booted, you should be in EMUI 4.1. Go to settings and into "About Phone". In there, look for a field called "IMEI". If you see a number, that means you did everything properly, if you see "unkown" or nothing at all, then that means you lost your IMEI... which means you will have connectivity issues. To fix this, you will need to do a full wipe (so, boot into recovery (we lost TWRP due to the update) and then go to wipe, in there select everything except SD card) and follow the steps again starting from 3, this time flashing the other update (so if you flashed B895, flash B896 this time and vice versa)).
Now, this last step we made has wiped our custom recovery... so sad. We have to flash it again, but we are almost finished!! Now it's time for you to move the custom ROM you want to your SD card (SD card is mandatory, as we will wipe internal storage). You should also move your custom ROM of choice. If you want root, also move the "SuperSUv82.zip" file.
OPTIONAL:
If you want Gapps, that means the Google apps, so PlayStore, Google services and such (and you really should want them, as Android without PlayStore is kinda rough), then you need to download them separately.
So, go to the Gapps website and select the pacakge you want. You NEED to choose the ARM64 platform, the android version depends on the ROM you are flashing, so check which version it runs, and the package itself is personal preference. Here you can see a comparison of each package, detailing what each one contains so you can make a decision. The aroma package is kinda bugged, I would avoid it. Choose wisely, as flashing another Gapps package once you have flashed a different one can and most likely will cause issues. If you want my opinion, I would stick to the nano package. It offers the basic Google functionality and allows you to download other Google apps you may need/use with the PlayStore once you are booted up.
Once you choose your package, move it to your phone's SD card along with the ROM and the SuperSU zip if you want it.
Check that USB Debugging is still enabled, and then type:
Code:
adb reboot bootloader
Once into the bootloader, flash the custom recovery once again with:
Code:
fastboot flash recovery recovery.img
Then:
Code:
fastboot reboot
Once booted up again, type:
Code:
adb reboot recovery
And now it's time to drop the bomb, say bye bye to EMUI, and say hello to... whatever it is you are installing.
7. FLASHING YOUR CUSTOM ROM OF CHOICE
MOST CUSTOM ROMS REQUIRE AN LTE CAPABLE SIM IN ORDER TO HAVE CELLULAR NETWROK WORKING CORRECTLY, THIS DEPENDS ON A ROM TO ROM BASIS, DO YOUR RESEARCH BEFORE FLASHING
Once in TWRP, go to wipe and check every box, I'm serius, check everything except the SD card. Once that's finished, the moment of glory has come. Go to install and flash your ROM. It will take a while, and when that's done reboot. The phone should boot into your ROM. If you want either Gapps or SuperSU, make a quick setup and enable USB Debugging again, then reboot to recovery with:
Code:
adb reboot recovery
Once in TWRP, go to install and flash the Gapps package and the SuperSU zip (in that order) if you want it. Reboot. That should be it! You are done!
8. UNBRICKING
I don't know why, but with all the flashing and the testing I've done you would have thinked that I should have suffered of a brick state at least once... that was, luckily, not the case. I haven't suffered a single brick. I don't know if I'm extremely lucky or if this phone is tremendously resilient, but the case is I haven't had any issues of this kind.
However, I can understand that it is a possibility, so if this happens to you my best advice is to do the following: Boot into recovery mode (either stock or TWRP depending on where in the whole process you got stuck), make a full wipe and apply the update from "HW_Stock_Android_6.zip" with the dload folder and the three buttons method. That should get it unstuck, if not... try the same with the "HW_Stock_Android_5.zip" 's "UPDATE.APP".
9. INSTALLING XPOSED FRAMEWORK (OPTIONAL)
What? A custom ROM is not enough for you? Getting freed from EMUI is not enough? Well fear not then, because there's one last step for the true power user, for that man who thinks that everything is not enough, the good old Xposed Framework *queue fireworks and trumpets.
So, you need to install the Xposed Installer apk. Get it from here, and ONLY THERE. I once installed an apk from another source... ended up being adware, not fun. The apk is at the very bottom of the thread. You will also need the framework itself, get it from here.
Get the latest (arm64) version for your ROM. This depends on what Android version it is running on:
Code:
SDK21 = Android 5.0
SDK22 = Android 5.1
SDK23 = Android 6.0
SDK24 = Android 7.0
SDK25 = Android 7.1
SDK26 = Android 8.0
SDK27 = Android 8.1
You should also get the uninstaller in case things go south.
Once you got the files, install the apk on your phone. Open the app once. Transfer the framework and the uninstaller into your SD or internal storage. Boot into TWRP recovery and install the framework, reboot the device.
NOTE: Android 6.0 takes about 20 mins to boot, wait about an hour before deciding that it's bricked. Android 7.1.2 took me about 2 mins. I'm unaware of the boot times of other versions, but be aware that it can take LONG. If you think it really got bricked, boot into TWRP again and flash the uninstaller. That should get it unstuck and you can either try again or leave it as is.
----------------------------------------------------------------------------
Well guys, that's all I got, quite a big write up huh? I don't really have nothing else to say, just remember that what you are doing here is at your own risk and I don't want anybody blaming me for the bad things that can happen. I will proceed to leave you with the download links so you can try this yourself. I'm currently running Lineage OS 14.1 which features Android Nougat 7.1.2 on my Huawei P8 lite ALE-L23, I've never been happier to be free from the manufacturer's ROM.
DOWNLOADS
(The B895 and B896 update's links are not mine)
Huawei's Stock Android 5:
Android Filehost
Mediafire
Huawei's Android 5 Transition:
Android Filehost
Mediafire
Huawei's Stock Android 6:
Android Filehost
Mediafire
Huawei's Android 6 Root:
Android Filehost
Mediafire
EMUI 4.1 (B895):
Android Filehost
EMUI 4.1 (B896):
Android Filehost
Platform-Tools:
Android Filehost
Mediafire
TWRP 3.1.1:
Android Filehost
Mediafire
Gapps:
Open Gapps
SuperSU:
Android Filehost
Google Drive
Hi,
I didn't understand what do you mean whan you write: Once booted, you should be in EMUI 4.1. If you retained your IMEI, you are in good path, if not... then do a factory reset (wipe everything) and repeat the steps starting from 3.
Could you explain it better?
Thank you
ilmatte said:
Hi,
I didn't understand what do you mean whan you write: Once booted, you should be in EMUI 4.1. If you retained your IMEI, you are in good path, if not... then do a factory reset (wipe everything) and repeat the steps starting from 3.
Could you explain it better?
Thank you
Click to expand...
Click to collapse
Yes, it's basically this: If you go into the "About Phone" section you will see that there's a field detailing your IMEI. I won't lie, I don't know exactly what it is, but it's a unique number for every phone and has something to do with your cellular network connection.
If you messed up at some point, you can lose your IMEI (i.e. you won't see it in that field or it will say "unknown" or something of the sort). If that happens, then it means you did something wrong, and proceeding in this state will make you have problems with your connection. The signal would be really unstable and it would be practically unusable.
To make a simpler check, if you have a cellular network connection, and can make calls and send/receive SMS on EMUI 4.1, then you won't have any problems.
Ah ok it wasn't so clear but I know what an imei is luckily it didn't erase it in my case. Anyway, I don't know how to thank you bro! You saved my life. I beleived to be screwed when I learned that Huawei stopped releasing the bootloader unlock code. How stupid they are. I blamed them through the customer support. I'm running lineage now! Kiss my ass Huawei!
ilmatte said:
Ah ok it wasn't so clear but I know what an imei is luckily it didn't erase it in my case. Anyway, I don't know how to thank you bro! You saved my life. I beleived to be screwed when I learned that Huawei stopped releasing the bootloader unlock code. How stupid they are. I blamed them through the customer support. I'm running lineage now! Kiss my ass Huawei!
Click to expand...
Click to collapse
Glad to hear I helped! Mind dropping a thank on the main thread? Hope you enjoy your phone
Thanks <3 -notes
Thank you tralph3, you make my life so easy, great easy guide. I have a few suggestions for improving clarity:
Step 1. "Stock_Android_5.zip" contains "transitional" android 6.0 ALE-L21C900B500 firmware According to including Spanish documentation "3., 3.1 Download the Android5.0 update package" It must be downloaded another 5.0 firmware. I use this 5.0 firmware to make kingroot preform root.
Firmware: huaweidl.com/download/p8-lite/ale-l21/b204/
Look for a line that says "Compilation Number" and tap...
Click to expand...
Click to collapse
Step 2. second point 2. Change to "Build Number"
su -c "grep -m1 -aoE 'WVLOCK.{14}[0-9]{16}' /dev/block/mmcblk0p7 |grep -aoE '[0-9]{16}'"
Click to expand...
Click to collapse
Step 2. getting unlock code. After executing command. Add step -Kingsroot display root access prompt ALLOW it.
t
Thanks for your work.
BelisTT said:
Thank you tralph3, you make my life so easy, great easy guide. I have a few suggestions for improving clarity:
Step 1. "Stock_Android_5.zip" contains "transitional" android 6.0 ALE-L21C900B500 firmware According to including Spanish documentation "3., 3.1 Download the Android5.0 update package" It must be downloaded another 5.0 firmware. I use this 5.0 firmware to make kingroot preform root.
Firmware: huaweidl.com/download/p8-lite/ale-l21/b204/
Step 2. second point 2. Change to "Build Number"
Step 2. getting unlock code. After executing command. Add step -Kingsroot display root access prompt ALLOW it.
t
Thanks for your work.
Click to expand...
Click to collapse
Thanks for pointing this stuff out, I'll make those changes you suggested and try to fix some typos too. So, what I gather from what you told me about that Android 5 thing is that in order to correctly flash the update I'm providing you NEED to be in Android 6, right? Whereas with the one you are providing me it should boot into Android 5 regardless of what you currently have. If that's the case, I'll include both and tell people of the distinction between the two so they can use the one they want/need (after all, the transition package is much smaller and easier to download). I'll download the package and upload it to Android Filehost along with everything else. I think I'll keep the mediafire downloads as a mirror. I'll get to that, thanks.
tralph3 said:
.... in Android 6, right? Whereas with the one you are providing me it should boot into Android 5 regardless of what you currently have.
Click to expand...
Click to collapse
Yes, exactly. Thanks for curating this additional download, good idea.
Does this also work for the PRA-LX1 version?
I have Android 8.0 on it and absolutely no idea what EMUI version or eben the firmware version.
I want to put crDroid on this phone because EMUI ... you know, it's bad.
Otherwise: I am ok with paying these 4€ if this payed unlock works.
WHICH of all these DC Unlocker Apps do I need for getting the unlock code?
Badoolo said:
Does this also work for the PRA-LX1 version?
I have Android 8.0 on it and absolutely no idea what EMUI version or eben the firmware version.
I want to put crDroid on this phone because EMUI ... you know, it's bad.
Otherwise: I am ok with paying these 4€ if this payed unlock works.
WHICH of all these DC Unlocker Apps do I need for getting the unlock code?
Click to expand...
Click to collapse
DON'T TRY ANY OF THIS. All of what I've detailed is for the P8 lite 2015, your phone is a different 2017 version that's basically another completely different phone with the same name, because Huawei doesn't know how to namr their devices. You have a different chipset, doing anything of what's described here will most likely brick your phone. With that said, maybe the bootloader unlock method works IF YOU FIND ANOTHER WAY TO ROOT YOUR PHONE. DON'T ROLL BACK TO ANDROID 5 WITH THE FILES I'M PROVIDING PLEASE.
This forum is dedicated to P8 lite 2015, you can see there's a different forum for 2017. Good luck.
Hello, I have ALE-L21 with EMUI 4.0.3 - MM 6.0 - version B633 and i can not downgrade to android 5, phone says : update failed, or stuck on 5%. could someone help me please ?
I tried a lot of stock ROMs, 5.0 , 6.0 etc, nothing worked for me.
Thanks,
Ax1qwer said:
Hello, I have ALE-L21 with EMUI 4.0.3 - MM 6.0 - version B633 and i can not downgrade to android 5, phone says : update failed, or stuck on 5%. could someone help me please ?
I tried a lot of stock ROMs, 5.0 , 6.0 etc, nothing worked for me.
Thanks,
Click to expand...
Click to collapse
Are you using the stock package or the transition package? If you are using the transition package, try stock.
I tried both, with no success. And many others.
I tried to update via internal storage and SDcard too, with no success.
If phone is connected to pc, updating stuck on 5%, if not connected to PC, update fails.
Ax1qwer said:
I tried both, with no success. And many others.
I tried to update via internal storage and SDcard too, with no success.
If phone is connected to pc, updating stuck on 5%, if not connected to PC, update fails.
Click to expand...
Click to collapse
Did you wipe all of your data with the stock recovery? If nothing works then I could suggest you to try to apply the downgrade with sideload. (Boot into recovery and select to apply update from adb, then you type adb sideload <filename>)
I'm clueless on why it doesn't work on your device, it should.
Also, you can try to flash the stock android 6 rom first, that's an older emui version (4.0). If you can flash that, then maybe you can flash android 5 after it.
i have tried intalling both the 5.0 stock roms but it always fails at 5%. i got ALE-L21C02B896 with emui 4.1 and android 6.0. i've been trying different guides but all lead me to dead ends. please help
thanks in advance
Wazu786 said:
i have tried intalling both the 5.0 stock roms but it always fails at 5%. i got ALE-L21C02B896 with emui 4.1 and android 6.0. i've been trying different guides but all lead me to dead ends. please help
thanks in advance
Click to expand...
Click to collapse
I have the exact same firmware(ALE-L21C02B896) that you have and I also cant downgrade to android 5.0 using any of the tutorials that I found in XDA Furum.
razorfancy said:
I have the exact same firmware(ALE-L21C02B896) that you have and I also cant downgrade to android 5.0 using any of the tutorials that I found in XDA Furum.
Click to expand...
Click to collapse
Yeah it very frustrating, please let me know if you find a way and ill do the same.
Wazu786 said:
Yeah it very frustrating, please let me know if you find a way and ill do the same.
Click to expand...
Click to collapse
Told you guys, try to flash android 6 and see if that works, afterwards you can flash android 5.
tralph3 said:
Told you guys, try to flash android 6 and see if that works, afterwards you can flash android 5.
Click to expand...
Click to collapse
I tried your Huawei's Stock Android 5, Huawei's Android 5 Transition and Huawei's Stock Android 6 and all failed to install giving error at 5 percent.
tralph3 said:
Told you guys, try to flash android 6 and see if that works, afterwards you can flash android 5.
Click to expand...
Click to collapse
i tried android 6 also and it also failed at 5%, please is there anything else i can try?