Is there any module xposed except acdisplay,
Or trick to bring active display to custom rom?
I love active display like a stock rom.
Related
I just ordered my Moto X Dev Edition during the Cyber Monday madness sale. I can honestly say that this will be the only phone I could enjoy on stock firmware, but I was wanting to use Cyanogenmod on it just because it features WAY more convenient toggles and controls. I would hate to miss out on Active Display and Touchless Controls. My question is: has anyone tried going into the Play Store and instaling the Touchless Control apk on a custom ROM? Does it work? I know it's entirely based on it's "always listening" chip, and not software, but I'm worried Motorola might be restricting that feature to stock firmware.
trevorftard said:
I just ordered my Moto X Dev Edition during the Cyber Monday madness sale. I can honestly say that this will be the only phone I could enjoy on stock firmware, but I was wanting to use Cyanogenmod on it just because it features WAY more convenient toggles and controls. I would hate to miss out on Active Display and Touchless Controls. My question is: has anyone tried going into the Play Store and instaling the Touchless Control apk on a custom ROM? Does it work? I know it's entirely based on it's "always listening" chip, and not software, but I'm worried Motorola might be restricting that feature to stock firmware.
Click to expand...
Click to collapse
Cyanogenmod has some sound issues, specifically the head phone jack does not work, dialer only works as a speaker phone. The stock ROM with xposed frameworks functions better than any cm 10.2 or 11 or any custom ROM. You get all the customization available with almost any custom ROM but with all the perks that the stock ROM gives, touch less control and active notifications
Sent on my Moto X
flashallthetime said:
Cyanogenmod has some sound issues, specifically the head phone jack does not work, dialer only works as a speaker phone. The stock ROM with xposed frameworks functions better than any cm 10.2 or 11 or any custom ROM. You get all the customization available with almost any custom ROM but with all the perks that the stock ROM gives, touch less control and active notifications
Sent on my Moto X
Click to expand...
Click to collapse
People say that, but I've never seen Xposed mods that offer the convenient toggles and status bar brightness slider that CM offers. That, and I can't find anything better than the native theming. Any suggestions?
trevorftard said:
People say that, but I've never seen exposed mods that offer the convenient toggles and status bar brightness slider that CM offers. That, and I can't find anything better than the native theming. Any suggestions?
Click to expand...
Click to collapse
Gravity box has the brightness slider, toggles, center clock mods, battery mods, volume steps, power menu and more
Sent on my Moto X
flashallthetime said:
Gravity box has the brightness slider, toggles, center clock mods, battery mods, volume steps, power menu and more
Sent on my Moto X
Click to expand...
Click to collapse
Thank you. What about theming? I'm addicted to the HoloGlass theme.
trevorftard said:
Thank you. What about theming? I'm addicted to the HoloGlass theme.
Click to expand...
Click to collapse
Xtheme another module for xposed but you need to use themes that are ported or developed for xtheme engine
Sent on my Moto X
As the official update has arrived, I was Wondering how can I enable Ambient Display on this ROM 5.1 like Nexus 6?
It's really a cool feature and it will be a great addition to this ROM.
Thanks in Advance
prspuri9 said:
As the official update has arrived, I was Wondering how can I enable Ambient Display on this ROM 5.1 like Nexus 6?
It's really a cool feature and it will be a great addition to this ROM.
Thanks in Advance
Click to expand...
Click to collapse
I've seen a xposed module to enable that, but since xposed doesn't work on 5.1 yet, you'll have to wait. But even with it enabled pick up to display mode will not work. And because Android One devices doesn't have a AMOLED display, there will be a battery drain. So I don't see a up side with this.
Approach / Wave options work well on CM12 based ROM, meaning, when you wave your hand over the phone it wakes up and shows the google ambient display, but in stock if you disable motoDisplay to get AmbientDisplay, the approach/wave sensors sees to work.
Is there a mod to enable the CM12 Approach/Wave functions with AmbientDisplay turned on, and motoDisplay off?
Anyone know of a workaround for stock ROM?
Shemploo said:
Approach / Wave options work well on CM12 based ROM, meaning, when you wave your hand over the phone it wakes up and shows the google ambient display, but in stock if you disable motoDisplay to get AmbientDisplay, the approach/wave sensors sees to work.
Is there a mod to enable the CM12 Approach/Wave functions with AmbientDisplay turned on, and motoDisplay off?
Anyone know of a workaround for stock ROM?
Click to expand...
Click to collapse
No. Making the sensors work on CyanogenMod requires changes to the selinux policies and there is no way that you can install an app that will do that.
I have a Note 3 which I'm looking to make into my backup phone/dedicated GPS. It's currently on 4.4.2 and I would like to believe that, in the intervening major versions, many of the missing (obvious) OS features which made Xposed so necessary are now available as stock system options. Being familiar with the awful, pervasive anti-customization/pro-simplicity/for-dummies mobile development philosophy that now threatens even PC software, I'm afraid I'm probably wrong.
Ideally, of course, I'd want Xposed on my yet-to-be-determined 7.x phone, but if that isn't going to happen, I'd like to know if there are built-in options now to partially replace great Xposed modules like:
NotifyClean - In Android N, can I set rules to totally block specific notifications?
NeverSleep - Set certain applications to disable sleep mode when active?
Wanam Xposed - Theming options (assuming I go with a Samsung phone)?
Xposed LED Control - Different LED colors per notification type?
DoubleTapToSleep - Sleep without using a hard button?
BootManager
Network Speed Indicator
If someone familiar with Android N could comment on the list above, I'd be very grateful. I'd rather buy a 'new' older phone than get an S8 or similar and find (assuming there's even a root exploit) that my phone is crippled versus my nearly 4 years old Note 3.
Notifiyclean can be substituted by power notification controls, which I don't know if it comes with stock rom, but I know it's there for the rom I'm using.
Neversleep can be substituted by the caffeine toggle, if your rom has it. I believe you can also find it on the play store to use if it's not built-in.
Wanam Xposed, I haven't used in ages. Can't even remember what it does...
LED Control should be built-in, if not custom roms.
DoubleTapToSleep should be your kernel.
Bootmanager, I'm unsure... Maybe alternatives with root?
Network Speed Indicator can be done with apps or built-in from custom roms.
http://cloud.tapatalk.com/s/58fb86661071a/Screenshot_20170422-120817.png?
http://cloud.tapatalk.com/s/58fb867bf37d6/Screenshot_20170422-122512.png?
http://cloud.tapatalk.com/s/58fb868630b93/Screenshot_20170422-122601.png?
Sent from my Nexus 6P using Tapatalk
Thanks... It sounds like I should be able to get by without Xposed, though I don't know if I'll ever be able to install a custom ROM considering I will probably end up with an AT&T phone. I guess first I need to find a rootable phone.
Is there an alternative to App Settings module, to allow for per-app dpi settings without Xposed, because android n?
thktanuki said:
Is there an alternative to App Settings module, to allow for per-app dpi settings without Xposed, because android n?
Click to expand...
Click to collapse
My first idea was Tasker, but I am not sure if you can modify the dpi value with Tasker itself. I guess with the help of an appropriate plugin, you should be able to set the dpi on a per-app base.
I've been reading here and there, and I've come upon that thread where you can enable DCI_P3 calibration for your display on your OP3T, only on OOS thou.
Why isn't it supported on any ROM where the Display Model doesn't even turn up, and why haven't any ROM Devs implemented it?
Cheers!
because not all 3/3T support dci-p3 color scheme ..
Only S6E3FA5 panel ID that supporting dci-p3
twentyfourinc said:
because not all 3/3T support dci-p3 color scheme ..
Only S6E3FA5 panel ID that supporting dci-p3
Click to expand...
Click to collapse
It's a simple thing to have the ROM detect the ID of the Panel, and then have ROM to choose whether to show the option in Calibration Settings under Settings.
thes3usa said:
It's a simple thing to have the ROM detect the ID of the Panel, and then have ROM to choose whether to show the option in Calibration Settings under Settings.
Click to expand...
Click to collapse
If you think simple enough, so make yourself...
It's added through the kernel not the ROM, Ex and Blu spark both have it in OOS and custom kernels. Lineage also have it in their kernels too.
It works really well in LineageOS, I like the not so over saturated coloring in this mode, it's really nice to the eyes.
A Magisk module is available for it. https://forum.xda-developers.com/showpost.php?p=72842349&postcount=11
@thes3usa DCI_P3 color profile is available in official Resurrrection Remix rom for OP3T
You can with this one:
https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384
It's in Live Display settings. Don't change the kernel though, or you won't have the option anymore.
Installed the Aug.31 build of Lineage on my 3T yesterday, and it's an option there in Live Display settings too. There also seems a bug where the selected colour profile reverts to default every time you turn the screen off and on though :/
Apparantly the dci-p3 should be available using Vertex OS. But since i dont have the supported panel(wierd, since i bougth it in June 2017, so probably didnt get the newer display).. But it should be possible to change even on the old display ?
EDIT:
I found out that i have the correct display which ends on a5, so it should be able. But cannot find the necessary files in the sys/devices/virtual/graphics/fb0 folder....