Database Develop

[MOD] bLED button LED notification for Galaxy Note

Update 14/12/2011
Watch it in action here http://www.youtube.com/watch?v=OojU0REhrL0.
Update 13/12/2011
bLED kernel module updated to 0.2. Should fix the random crash occuring. Not sure how many of you guys checked the dmesg and found out plenty of stack traces on 0.1
Grab your copy bled-0.2-lkm-update.zip and flash with Clockworkmod. Leave the bled-0.1.apk installed as is, no update is available for that yet
Original post
bLED touchkey button notification for GALAXY Note, version 0.1-EA
The wait is over.
Introducing bLED, my version of blinking notification through touchkey button LEDs. It's still on its early access version 0.1, and there are still some known inconveniences or bugs. Please refer to the known problems section for more info.
After applying the patch and installing the apk, your GALAXY Note will blink any notification found on the status bar, including missed calls and (TouchWiz) SMS
This MOD has been tested on KKA kernel, but it should support all stock kernels (seems like none of custom kernels are supported). But if anything happens, you can restore with the nandroid backup of (just) your system image.
eybee1970 said:
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
Click to expand...
Click to collapse
I could be wrong, it could possibly be another issue rather than stock touchkey driver.
angelom said:
I entered the stock touchkey drivers but bled still does not work.
At this point I do not think it's a driver issue.
And then FM 1.4 does not have the modified drivers
Click to expand...
Click to collapse
Prerequisites
- You'll need a clockworkmod-enabled GALAXY Note. Some advanced users can also load the kernel module by him/herselves.
Installation
0) Do nandroid backups!
Will not held responsible for bricking your phone if you don't backup first
1) Install the MOD
1.a) Download the update.zip (updated to bled-0.2-lkm-update.zip) and copy over to your SD card
1.b) Reboot in CWM to flash the update.zip. Go to "install zip from sdcard", "choose zip from sdcard", navigate and select the bled-0.2-lkm-update.zip.
1.c) Power off the phone, and start it again (obviously)
2) Install the bLED accessibility service
2.a) Go to "Settings", "Applications". Tick on "Unknown Sources" option.
2.b) Download bled-0.1.apk and install it on your phone. Don't look for it afterwards on your drawer menu as it does not contain real Activity-based application.
2.c) Go to "Settings", "Accessibility". Tick "Accessibility" and "bLED". Just ignore the warning when ticking "bLED", as I'm not interested on your personal details
Lock your phone. Have missed calls, SMSes, Whatsapp messages, GMail, whatever. They're all going to be blinked by bLED
Known issue
- Duration of blinking is currently limited to 15 minutes
- There will be several seconds of delay before it will blink sms and missed calls. It happens due to the currenlty implemented notification logic. More of a workaround instead of elegant solution. Hope will have better logic for next releases on handling them.
- There are still some mutex locking bugs on KKA kernel. Very ironic, there seems to be some struggle to support PMIC on the currently best SoC in the world, by looking at the kernel codes.
Enjoy

apk link dosen't work!

Let´s try it out

yeahhhh....great man!!!

madguylb said:
apk link dosen't work!
Click to expand...
Click to collapse
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk

watch_mania said:
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
no, works...
Did you discover any negative side effects on e.g. battery life?

eybee1970 said:
no, works...
Did you discover any negative side effects on e.g. battery life?
Click to expand...
Click to collapse
Well I just got the kernel module working by last night and the accessibility service earlier today. Not enough time to tell yet
Will try blinking it tonight and see how much battery it would drain
But you can always disable the bLED accessibility service when you don't need it
Sent from my GT-N7000 using Tapatalk

THANK YOU MAN !
This was such an anoying point that made me not love my Note !
Please keep developing, you are doing great work for all Note Users !
I hope MIUI and Cyanogen will make a Note-Port soon and integrate your LED Notification MOD

Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help

brockyneo said:
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
Click to expand...
Click to collapse
try switching to latest Abyss Kernel 2.0

eybee1970 said:
try switching to latest Abyss Kernel 2.0
Click to expand...
Click to collapse
Hi sorry I should of said I'm already on the abyss 2.0

reset
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good

Main concern:
How is the power management on this ?

PATLEN said:
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Click to expand...
Click to collapse
Which kernel and version are you using? Yes there circumstances where the mutex crashes the system. It happened once on my KKA, but never afterwards. I think I have to consider some other ways for doing semaphores for bLED

brockyneo said:
Hi sorry I should of said I'm already on the abyss 2.0
Click to expand...
Click to collapse
Ok the Abyss kernel had BLN mod patched on the melfas touchkey driver. You needs kernels with stock melfas touchkey driver, left intact. Seems that BLN is not functional yet on the Abyss kernel anyway? Maybe you can ask him to revert to original melfas touchkey driver from Samsung

i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928

PATLEN said:
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
Click to expand...
Click to collapse
That one is stock ones right? Then I believe it should work. But please post the results here

waste of time. It does not work!

ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting

vuhongduong said:
waste of time. It does not work!
Click to expand...
Click to collapse
Well at least I wasted much more time than you did! But guess what, it worked on mine

[Mod][4.1.2] AOSP Locksceen Toggle for TW Roms

I made an AOSP Lockscreen Toggle Made for the Note II and ported it over to the Note 10.1.
Let me know how it goes for you and I will try to work out any bugs and any mods I make for the Note II I will try to add to this as well if possible.
You need to flash both files for it to work. and don't forget to Backup.

Reserved

Works
It works, I just wish that we can edit function on the lock Screen, instead of being confined to unlock, Camera, and google .
a. addition to Our great device anyway ,
Thank you very much

screenshot ?

http://forum.xda-developers.com/showthread.php?t=2059567

Once I perform a nandroid, I will flash these

After testing this for awhile on Resurrection Rom, I can say that it freezes my tablet 40% of the time, so I disable it. I use HOLO lock screen now to mimic AOSP lock screen.

Not working on Dr. Akrim's v8 rom (4.1.2)
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM

bert269 said:
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM
Click to expand...
Click to collapse
You have to go into your system settings and enable it, it should be under lock screen options.

Thanks for this I hope to see some new moods here like this one thank you:thumbup:
Sent from my GT-N8013 using Tapatalk HD

Thank you
Sent from my GT-N8013 using Xparent Purple Tapatalk 2

I flashed this running on N8013-UEUCMA3-ARCMA3-XAR-deodexed ROM
After I flashed it, I'm getting some weird things like
Manage Accounts have "Push Subscriptions" instead of Gmail syncing
When changing fonts its says "More Fonts" for setting the fonts
I'm curious if anyone else is experiencing this issue
is there a certain order that these zips need to be flashed in? Do I have to reboot after each flash or can I flash both at the same time?
I really like this MOD, seems I don't know how to acurately unlock using the stock unlock method haha
EDIT:
Wiped, clean flashed the rom, checked and everything was good
Flashed the AOSP Lockscreen MOD and everything I mented before was broken
I also have this MOD installed N8013UEUCMA3-UnlimitedAppsMod just to let you know
Thank you in advance for letting me know if this is a me problem or a bug with this mod...

Any chance of getting this ported for XXCMC5?

Unlocking is not working. Im on ARHD rom. Weird.

[Closed] - Reduce intensity vibration

Hi guys
I'm probably not the only one that has some remarks with the vibration of the HTC One.
When I am on the lowest volume setting, other people can hear my phone vibrate out of my pocket.
It's even more horrible that I can only head the vibration instead of the noticiation sound when I recieve a text.
Does anybody have a solution to fix this issue or do I have to live with it?

MattProductions said:
Hi guys
I'm probably not the only one that has some remarks with the vibration of the HTC One.
When I am on the lowest volume setting, other people can hear my phone vibrate out of my pocket.
It's even more horrible that I can only head the vibration instead of the noticiation sound when I recieve a text.
Does anybody have a solution to fix this issue or do I have to live with it?
Click to expand...
Click to collapse
You need a custom kernel like Elementalx, Faux with the support at this mod and the Faux app for edit the density of the vibration

And I guess I'll lose all the data when installing a custom kernel?

MattProductions said:
And I guess I'll lose all the data when installing a custom kernel?
Click to expand...
Click to collapse
You won't lose anything if your phone is already modded.
If it isn't already modded you will lose data unlocking the bootloader.

Well, my phone has an unlocked bootloader + root access.
So that means that I can freely change the kernel without any consequences?

MattProductions said:
Well, my phone has an unlocked bootloader + root access.
So that means that I can freely change the kernel without any consequences?
Click to expand...
Click to collapse
Yup, you can flash any kernel compatible with your android version and phone version

Phone version, how do you mean?
Is that just the HTC One (as phone version) or the UL/Sprint/ATT version?

MattProductions said:
Phone version, how do you mean?
Is that just the HTC One (as phone version) or the UL/Sprint/ATT version?
Click to expand...
Click to collapse
For example, don't flash a Sprint kernel on a GSM phone

Allright, awesome!
Guess I'll be flashing kernels today

MattProductions said:
Allright, awesome!
Guess I'll be flashing kernels today
Click to expand...
Click to collapse
Good luck

I just flashed the ElementalX kernel (http://forum.xda-developers.com/showthread.php?t=2249774)
But apparantly, the vibration didn't reduce (or I coudn't find an option to do it).
Is that kernel able to modify the intensity?

MattProductions said:
I just flashed the ElementalX kernel (http://forum.xda-developers.com/showthread.php?t=2249774)
But apparantly, the vibration didn't reduce (or I coudn't find an option to do it).
Is that kernel able to modify the intensity?
Click to expand...
Click to collapse
I remeber that i edited it with Faux app.
You can try with it.

I can't seem to find a kernel for the 4.3 Sense version.
Is it just me over doesn't it exist?
http://rootzwiki.com/topic/100338-k...intelliplugdfsyncfauxsounds2wlinux-34-aug-15/

Nevermind, guess I found it
http://forum.xda-developers.com/showthread.php?t=2255900

***Easier method*** ***NO ROOT***
If you want to get rid of vibration completely, but without putting your phone on silent, just use App Ops! You need something to launch the activity, there are App-ops launchers in Play Store or you could just use a Tasker task. Once you're in, just go through all your apps and untick the "Vibration" permission!
No root required!!!
<<< Please say thanks if I was of help!

[Q] overclocking and interface editing exhibit T599n?[supernoob]

Hello, I am brand new to rooting. This is the first phone I have rooted. I am trying to improve its performance and and possibly change the boot animation and stuff. I used rom toolbox but it wouldn't change my boot. And all overclocking apps cqn only underclock it. Does anyone know if it cqn be overclocked? And how to change the boot animation? I already improved space using gl to sd, but I haven't found any forums on overclocking qnd and boot animation. Please help this noob. And thank you

You can use Boot Box (look it up on Google Play) to change your boot animation. To overclock your CPU, you're going to need a supported kernel, which isn't available at the moment. Overclocking won't be possible on your device unless someone releases a kernel which supports it.
By the way, you have posted this thread in the wrong forum section.

GXGOW said:
You can use Boot Box (look it up on Google Play) to change your boot animation. To overclock your CPU, you're going to need a supported kernel, which isn't available at the moment. Overclocking won't be possible on your device unless someone releases a kernel which supports it.
By the way, you have posted this thread in the wrong forum section.
Click to expand...
Click to collapse
Oh, im sorry, where would I post this? And thank you btw

boot box isn't working. Do you kbow the correct install locarion? I didn't doanything tothe rom. It's metro pcs t599n

coocoocahoo said:
boot box isn't working. Do you kbow the correct install locarion? I didn't doanything tothe rom. It's metro pcs t599n
Click to expand...
Click to collapse
The device is already rooted, right? Are you still using the stock Samsung ROM?

GXGOW said:
The device is already rooted, right? Are you still using the stock Samsung ROM?
Click to expand...
Click to collapse
Yes, the device is rooted, I have supersu enabled. And my device is currently stock rom. However I can't seem to change much. I tried to change the notification background using rom toolbox and that also didn't work. It seems as though my Device uses qmg files

coocoocahoo said:
Yes, the device is rooted, I have supersu enabled. And my device is currently stock rom. However I can't seem to change much. I tried to change the notification background using rom toolbox and that also didn't work. It seems as though my Device uses qmg files
Click to expand...
Click to collapse
If you are rooted, then install xposed framework & modules. It's the best way to customize. Use the search bar to find them.

mauam said:
If you are rooted, then install xposed framework & modules. It's the best way to customize. Use the search bar to find them.
Click to expand...
Click to collapse
Most of the mods are for 4.2 and 4.3. I have 4.1.2. It's still jellybean., but will it work on these mods? I don't to end up with a bricked phone.

coocoocahoo said:
Most of the mods are for 4.2 and 4.3. I have 4.1.2. It's still jellybean., but will it work on these mods? I don't to end up with a bricked phone.
Click to expand...
Click to collapse
Of course not. If it says 4.2, it's for 4.2 (always read the OP carefully) & so on. If you know what you're doing, you won't brick your phone, for sure

[Q&A] PopRocks Rom V1: TW Rom Based On Tmo Stock LP Base Cod6

Q&A for PopRocks Rom V1: TW Rom Based On Tmo Stock LP Base Cod6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PopRocks Rom V1: TW Rom Based On Tmo Stock LP Base Cod6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

mcdavid said:
Congrats on the new rom Mega. I haven't flashed it yet. But, I'm 99.99999999% sure you won't be able to get permissive mode on stock kernel. I've tried odined COD6 stock and a COD6 custom rom (both with stock kernel) and permissive was unobtainable. I then installed Bioshock 3.6 kernel on the custom rom and permissive is enabled by default. So, I'm sure it is a stock kernel issue. I strongly prefer using a stock kernel. So, I am hoping there is some other workaround to permissive mode. I can live without WLD (which needs permissive mode). But, I really really like Viper (which also requires permissive mode to work right.
Click to expand...
Click to collapse
YES me too!! I really love using kitkat from you ! I am hoping and hoping that once this whole permissive mode is solved, I can get back to using Viper. Without viper, I feel like I am missing something on my phone. Thank you again for your hard work , dedication, and love for andriod!

Home Button
I seem to be having some issues with my home button. It stops working and if I hit the menu key I can then hit the home button to go to the home screen. Any ideas?
Wiped full phone (including full internal data), then flashed, set up as a new device, wiped SD, and used Titanium Backup to load my apps.
SuperSU Prompt is turned off, and everything else is working great.

sd card access
i installed poprocks v1 yesterday. runs great. i made a nandroid in twrp but i cant see it in root explorer. im down to 500mb in internal storage. i need to move the backup to my sd card but cant. when i plug into my pc i see it there but says cant move it because folder is protected. what can i do here? thanks

re: home button
matt.b.powell said:
I seem to be having some issues with my home button. It stops working and if I hit the menu key I can then hit the home button to go to the home screen. Any ideas?
Wiped full phone (including full internal data), then flashed, set up as a new device, wiped SD, and used Titanium Backup to load my apps.
SuperSU Prompt is turned off, and everything else is working great.
Click to expand...
Click to collapse
If your home button is mechanically defective you can use a launcher
like Go Launcher or most any other launcher which has the option to
simulate the home button with swiping or double tapping the screen.
Most all the launchers like apex/go/adw and many others have the option.
Good luck!

Misterjunky said:
If your home button is mechanically defective you can use a launcher
like Go Launcher or most any other launcher which has the option to
simulate the home button with swiping or double tapping the screen.
Most all the launchers like apex/go/adw and many others have the option.
Good luck!
Click to expand...
Click to collapse
I wish it was mechanically defective but, it doesn't seem to be. At any rate a reboot seemed to clear up the issues I as having.

Every time I re root my phone after lollipop update, I can't get into twerp, it says something is causing it to be blocked, and every time I cf auto root or flash twerp, it fails, any light u can shine on me would greatly be appreciated. Thanks in advance.

question w its not exacly a rom question morr like if this version of tmo lolipop has multi user option cause idk were it is on this ver i do know google ver how to use multi users on lolipop. sorry for my english not my main (´-﹏-`；)

CousinMikeyP said:
Every time I re root my phone after lollipop update, I can't get into twerp, it says something is causing it to be blocked, and every time I cf auto root or flash twerp, it fails, any light u can shine on me would greatly be appreciated. Thanks in advance.
Click to expand...
Click to collapse
You gotta deactivate "reactivation lock" in settings > security

I think I did something wrong. I flashed pop rocks and I don't see a difference in photos between dynamic pop, teks rom and stock lollipop. Should I re-download and flash again? Or are there specific settings I need to change? Thanks

VeNuMuS said:
I think I did something wrong. I flashed pop rocks and I don't see a difference in photos between dynamic pop, teks rom and stock lollipop. Should I re-download and flash again? Or are there specific settings I need to change? Thanks
Click to expand...
Click to collapse
refering to picture quality?

mgbotoe said:
refering to picture quality?
Click to expand...
Click to collapse
Yeah. One reason I flashed it was because I take a ton of pictures. If anything helps take them better I try it. Says in the op that it was an overhauled camera. So I definitely wanted it. But if there is a difference I can't really notice it. Unless I'm using the wrong settings

VeNuMuS said:
Yeah. One reason I flashed it was because I take a ton of pictures. If anything helps take them better I try it. Says in the op that it was an overhauled camera. So I definitely wanted it. But if there is a difference I can't really notice it. Unless I'm using the wrong settings
Click to expand...
Click to collapse
I personally never noticed a difference in quality compare to other roms or stock. Im guessing to ask in the main thread...he is more active in there than the QnAs (Wont be surprise if he doesn't know xda even made one lol)

mgbotoe said:
I personally never noticed a difference in quality compare to other roms or stock. Im guessing to ask in the main thread...he is more active in there than the QnAs (Wont be surprise if he doesn't know xda even made one lol)
Click to expand...
Click to collapse
Great idea. Just didn't want to clutter the thread but I'll ask. Thanks

Stuck at Tmobile screen
Hi, i downloaded V2 and followed the instruction step by step. but after flashing the Rom V2 in TWRP and reboot the phone. it stuck at the white Tmobile screen. Any help with this please. Thanks

PopRocks VZ Dev Ed
Is PopRocks for the Verizon Developer Edition still being worked on?

wipe everything and reflash,working to me
Sent from my SM-N910T using XDA Free mobile app

mgbotoe said:
I personally never noticed a difference in quality compare to other roms or stock. Im guessing to ask in the main thread...he is more active in there than the QnAs (Wont be surprise if he doesn't know xda even made one lol)
Click to expand...
Click to collapse
I think the main difference that I've noticed is when you use the screen write function. The image is infinitely clearer.

Anyone still in this wasteland?...
Sent from my Palm Pilot

Zzzz...
Sent from my Palm Pilot