Same as m9
Go to This thread :good:
Good luck
Yes its sim unlock able
Lussardi said:
Yes its sim unlock able
Click to expand...
Click to collapse
So it worked for you ?
be free said:
So it worked for you ?
Click to expand...
Click to collapse
yes works fine!
Worked for me, used an inactive tmobile sim but the phone recognized it fine
holofractal said:
Worked for me, used an inactive tmobile sim but the phone recognized it fine
Click to expand...
Click to collapse
Hi I am concern for LTE support after Sprint unlock.
Its will support LTE band 3 (1900) on T Mobile?
Thanks
So will it have the same issues with the LTE bands as the M9? Getting a sprint HTC 10 is tempting, but need LTE (1800 and 2700)
Thanks for this. I acquired a Sprint HTC 10 and was able to SIM unlock using this method. To my surprise the phone picked up LTE on my AT&T SIM card.
Hi. after my phone is unlocked. can it still use with Sprint network normally?
@stifilz, what's up with the HTC 10 unlock?
freeza said:
@stifilz, what's up with the HTC 10 unlock?
Click to expand...
Click to collapse
No longer needed to be done remotely. NV unlock works fine
I did the NV method but some times I need to reset all the setting and set up my phone again to get service again
Sent from my HTC 10 using Tapatalk
I done SIM unlock of my HTC 10 Sprint but NO data - only calls
I'm from Ukraine , Kiev
I too have unlocked my sprint HTC 10 using the NV method (a thanks to the author of that method) and call and texts work fine but no data. APN settings are all filled in but still no data connection. Can anyone shine some light as to what my problem could be?
---------- Post added at 01:26 AM ---------- Previous post was at 01:24 AM ----------
vsemoney said:
I done SIM unlock of my HTC 10 Sprint but NO data - only calls
I'm from Ukraine , Kiev
Click to expand...
Click to collapse
Did you ever get your data working? I have the same problem.
Hi, can you please explain the process your phone went through when booted back up with new SIM the first time? I have a Sprint HTC 10 trying to activate on ATT. I got an unlock code and it still said SIMlock Enabled. So I was instructed to go get a new SIM card and had it activated while in the device powered off. Problem is the same when powered back on. Also, if I select GSM mode, it says GSM mode not supported in US, only foreign SIM. Does this mean I was given an unlock code that wasn't a US unlock code? I'd really appreciate any help, this is going on two weeks now trying to get this to work.
kjack3410 said:
I too have unlocked my sprint HTC 10 using the NV method (a thanks to the author of that method) and call and texts work fine but no data. APN settings are all filled in but still no data connection. Can anyone shine some light as to what my problem could be?
---------- Post added at 01:26 AM ---------- Previous post was at 01:24 AM ----------
Did you ever get your data working? I have the same problem.
Click to expand...
Click to collapse
Yes, resolved!
I flashed custom ROM Viper 10_3.5.0 and 2G/3G data is working right now , but you should filled a wrong APN string (any words at all )
vsemoney said:
Yes, resolved!
I flashed custom ROM Viper 10_3.5.0 and 2G/3G data is working right now , but you should filled a wrong APN string (any words at all )
Click to expand...
Click to collapse
I finally got it working but thanks for the reply. Do you get LTE data speeds with the ROM you're using or just 3G/4G ?
kjack3410 said:
I too have unlocked my sprint HTC 10 using the NV method (a thanks to the author of that method) and call and texts work fine but no data. APN settings are all filled in but still no data connection. Can anyone shine some light as to what my problem could be?
---------- Post added at 01:26 AM ---------- Previous post was at 01:24 AM ----------
Did you ever get your data working? I have the same problem.
Click to expand...
Click to collapse
kjack3410 said:
I finally got it working but thanks for the reply. Do you get LTE data speeds with the ROM you're using or just 3G/4G ?
Click to expand...
Click to collapse
as yet NO 4G LTE in our country (I'm from Ukraine )
I use only 2G/3G data
I can confirm this does work to unlock sprint HTC 10. First few runs failed, then I purchased Sunshine and ran it. But I think what really did the trick was going into the file you save and changing first two numbers from 01 to 00, save, then write to device with NV. Worked like a charm! And that's with LTE on ATT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am on a Sprint HTC 10 here in the states. Any chance I can use this method to get service/data when I travel to Qatar/India? Thanks all, this is new to me.
Related
hi there,
I have some problem with my APN because its not working with 2g or 3g, what can i do ?
medo18 said:
hi there,
I have some problem with my APN because its not working with 2g or 3g, what can i do ?
Click to expand...
Click to collapse
Did you insert it manually?
Does it save? (does it show up under APNs?)
DoubleYouPee said:
Did you insert it manually?
Does it save? (does it show up under APNs?)
Click to expand...
Click to collapse
Yes, but the problem now i can get IP .
look this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try turning on airplane mode on, wait 5 seconds, turn it off again
DoubleYouPee said:
Try turning on airplane mode on, wait 5 seconds, turn it off again
Click to expand...
Click to collapse
Not working too
Any solution ? plz my phone is useless .
medo18 said:
Any solution ? plz my phone is useless .
Click to expand...
Click to collapse
Did you try the app apnmanager?
DoubleYouPee said:
Did you try the app apnmanager?
Click to expand...
Click to collapse
yes i think i should be to do something in build.prop for active 2g or 3g, maybe verizon is disable (GSM-UMTS).
medo18 said:
yes i think i should be to do something in build.prop for active 2g or 3g, maybe verizon is disable (GSM-UMTS).
Click to expand...
Click to collapse
I don't know.. :/
1) set to GSM only
2) try forum.xda-developers.com/showthread.php?t=1326310
Else try other sim-card or somesthing
DoubleYouPee said:
I don't know.. :/
1) set to GSM only
2) try forum.xda-developers.com/showthread.php?t=1326310
Else try other sim-card or somesthing
Click to expand...
Click to collapse
Thank you but this is for signal only .
This may sound silly and basic, but after you save your APN info, and you are back at the list of APN's, is the little round button on the far right in green? It should be green to show that your phone is using that APN.
Also what is all the info you're putting into the fields of that APN? Maybe there's a typo you're not seeing?
LaZiODROID said:
This may sound silly and basic, but after you save your APN info, and you are back at the list of APN's, is the little round button on the far right in green? It should be green to show that your phone is using that APN.
Also what is all the info you're putting into the fields of that APN? Maybe there's a typo you're not seeing?
Click to expand...
Click to collapse
Thank you, yes i saw that is green but not working.
I just switched to my new provider with simcard and I might have the same problem now! APNs there and selected but nothing happens
---------- Post added at 01:29 PM ---------- Previous post was at 12:57 PM ----------
I fixed it. Can you post your APN settings?
DoubleYouPee said:
I just switched to my new provider with simcard and I might have the same problem now! APNs there and selected but nothing happens
---------- Post added at 01:29 PM ---------- Previous post was at 12:57 PM ----------
I fixed it. Can you post your APN settings?
Click to expand...
Click to collapse
Same problem LOL
my APN to Saudia Arabia - Mobily
======================
Name : Mobily
Apn : web1
APN type : default
Apn protocol : IPV4
======================
Try web2
Then reboot or on/off airplane mode
DoubleYouPee said:
Try web2
Then reboot or on/off airplane mode
Click to expand...
Click to collapse
not working too
web1 to postpaid ( ME )
web2 to prepaid
medo18 said:
not working too
web1 to postpaid ( ME )
web2 to prepaid
Click to expand...
Click to collapse
Then I don't know my provider lists:
APN-type: internet
However it does not work. When I put it on 'default' it was fixed.
Are you sure you have enough signal? Without the GSM-fix I provided in post #9 it might think it doesn't have enough signal and it disables 3G.
Good luck
DoubleYouPee said:
Then I don't know my provider lists:
APN-type: internet
However it does not work. When I put it on 'default' it was fixed.
Are you sure you have enough signal? Without the GSM-fix I provided in post #9 it might think it doesn't have enough signal and it disables 3G.
Good luck
Click to expand...
Click to collapse
i tried . it didn't work with me .
thank you a lot .
medo18 said:
Yes, but the problem now i can get IP .
look this
Click to expand...
Click to collapse
I think your current ROM is not a stock ROM.
May be custom rom using. (Battery indicator is custom rom indicaor on indicator bar)
If you were used at stock rom, Internet/MMS were possible?
I think the custom ROMS not support GSM DATA connection.
For example, previous global model droid 2 global's a few custom roms are
currently not support GSM data connection.
May be , It's same with Droid 3.
I recommend that you revert to stock ROM and set APN and re-check it.
Did you have to enter anything in the username/password field on your APN?
If so, you could take a look at the /system/etc/ppp/peers/ppp-ril.options and change the 'NotUsed' with your username and password. This fixed it for me with my provider.
Hi friends !
I have such problems with data connection on my Sprint M8. 3g doesn't work at all. and there is not roaming settings. I ve read some topics that says I have to update my profile and PRL but I have told without CMDA its impossible. I really need these functions ? so please help me to fix these. problems. and sorry my english
Check my guide in my sig... It's old but should still work.
gunfromsako said:
Check my guide in my sig... It's old but should still work.
Click to expand...
Click to collapse
thankyou very much . i got entered here ##3282# (Data) but what am i suppose to change to enable 3g ?
and when i try to restore my data profil it says your custom data profil will erased do you want to continuie ? shal i continue ?
there is a lot of information for exaple user name. would i have any problems with simcard ?
Are you on sprint services?
gunfromsako said:
Are you on sprint services?
Click to expand...
Click to collapse
unfortunately no. there is no sprint service or any cdma
by the way my device doest have roaming settings either.
which network operator are you using ?
Vcek said:
which network operator are you using ?
Click to expand...
Click to collapse
Life and it just relased 3g but i can not use it
try enabling 3g/UMTS frequency with QPST, should fix your problem if there is UMTS coverage
I've tried but can do it. from where it is there is a lot of options
make a screenshot which options you have to choose and I can help.
Vcek said:
make a screenshot which options you have to choose and I can help.
Click to expand...
Click to collapse
thank you very much
i have just did read from phone this options are on the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
your umts frequencies are all enabled (your QPST settings are fine), maybe it is APN problem or signal problem from operator
---------- Post added at 01:45 AM ---------- Previous post was at 01:41 AM ----------
dial *#*#4636#*#* choose "phone information" then scroll down it will show "Network type: ........."
Vcek said:
your umts frequencies are all enabled (your QPST settings are fine), maybe it is APN problem
---------- Post added at 01:45 AM ---------- Previous post was at 01:41 AM ----------
dial *#*#4636#*#* choose "phone information" then scroll down it will show "Network type: ........."
Click to expand...
Click to collapse
it seems there no problem at all yeap ? my device is sim free i think. is it possible that sprint does not allow 3g for my device ?
Scroll up like this
you are connected to EDGE network (2G), if you use other phone can you connect to 3G(H) ? because it seems like its problem from signal
Vcek said:
you are connected to EDGE network (2G), if you use other phone can you connect to 3G(H) ? because it seems like its problem from signal
Click to expand...
Click to collapse
yes even when i put my sim card to the other device it seems 3g top of the screen. by the way there are no roaming settings is it possible that depend on this ? because when i travel to other countries i can not use roaming internet.
i don't know why settings don't appear but i advise to install 5.1 lollipop GPE it have much less problems with gsm network because its ported from gsm rom.
Make a full backup and install it (you cannot restore data even with titanium backup, you will have to install everything again because of ART runtime), or make multiboot if you have enough storage memory and test it.
Vcek said:
i don't know why settings don't appear but i advise to install 5.1 lollipop GPE it have much less problems with gsm network because its ported from gsm rom.
Make a full backup and install it (you cannot restore data even with titanium backup, you will have to install everything again because of ART runtime), or make multiboot if you have enough storage memory and test it.
Click to expand...
Click to collapse
Ok thank you very much i will try. Any idea how can get the missing roaming settings ?
try changing sku_id to 42 (i forgot which file)
Just Updated to Android 6.0 ZV9 OTA
GSM Data is not working,
I am Using it with GSM sim outside USA
APn is set perfectly Still no Signs of Data Can Any body help
parinbhai, does this work for CDMA / evdo after updating to Marshmallow ? please let me know if you have tried.
i have same problem ,can u help me
Data not working on CDMA after updating to MM
Sent from my LGLS991 using Tapatalk 2
Did GSM data works after MM upgrade?
SAME HERE ...after update to ZV6
Possibly want to revert to ZV4... Its will be hard brick ?
Yes, don't downgrade to zv4.
Sent from my ONE A2003 using Tapatalk
parin11 said:
Just Updated to Android 6.0 ZV9 OTA
GSM Data is not working,
I am Using it with GSM sim outside USA
APn is set perfectly Still no Signs of Data Can Any body help
Click to expand...
Click to collapse
I Have the same problem, did you found any solution to this issue?
thanks!
have you found a solution please?
yes just do some setting in band. thats it voila it works..... pm me for solution will tell u in brief. easy soln works with all indian gsm sim
samratunlock said:
yes just do some setting in band. thats it voila it works..... pm me for solution will tell u in brief. easy soln works with all indian gsm sim
Click to expand...
Click to collapse
someone can help me, I lost the mobiles data since upgrade to 6.0 ZVA not up 3G I'm using it outside the United States in GSM mode or simply globally . in the names of the access point you are in the apn one that just says ! ota sn ! the cause of this will not raise the mobile internet ?, someone has found the solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just downgraded to zv6 and rooted and installed custom Rom and it's fully working now
Sent from my iPhone using Tapatalk
I am using zv6. Reliance GSM call text fine but no data can you help please?
harshp94 said:
I am using zv6. Reliance GSM call text fine but no data can you help please?
Click to expand...
Click to collapse
Did u setup your apn manually
TheMadScientist420 said:
Did u setup your apn manually
Click to expand...
Click to collapse
yes i did but no result.
parin11 said:
I just downgraded to zv6 and rooted and installed custom Rom and it's fully working now
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
downgrade from zv9 to zv6 no brick?
Mobile data not working in lg g4 ls991 after marshmallow update
Pla give me solution for mobile data not working after marshmallow update... Pls help....
trinidaddysan said:
someone can help me, I lost the mobiles data since upgrade to 6.0 ZVA not up 3G I'm using it outside the United States in GSM mode or simply globally . in the names of the access point you are in the apn one that just says ! ota sn ! the cause of this will not raise the mobile internet ?, someone has found the solution?
Click to expand...
Click to collapse
I have the same problem on zve :crying: please if you found a solution tell me :good:
ilyas1514 said:
I have the same problem on zve :crying: please if you found a solution tell me :good:
Click to expand...
Click to collapse
Check gen thread. Theres a link to a possible solution. Let me know if it works
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
anujjain1986 said:
Pla give me solution for mobile data not working after marshmallow update... Pls help....
Click to expand...
Click to collapse
Check gen thread got a link there for possible fix
Please let me know if it works
Trying to confirm it. Im a zv6 user with root so i cant try it
Hello
Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
mohsin-* said:
Hello
Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
Click to expand...
Click to collapse
dial *#*#4636#*#*, then choose gsm(wcdma i think, or something like that). or it could be that there is no 2g/3g in your area, so thats why it would pick lte. i dont even know if verizon actually has 2g/3g as its not really a gsm provider, its a cdma provider.
When was the last time you fastboot flashed the factory images for the version of Android you are using? Who carrier are you with? When did this problem start for you?
Sent from my Nexus 6 using XDA-Developers mobile app
---------- Post added at 05:43 PM ---------- Previous post was at 04:58 PM ----------
Verizon does not have the option to select 2G/3G. You can select global or LTE/CDMA. That is what is displayed on my N6 with a Verizon SIM card in it.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Verizon does not have the option to select 2G/3G. You can select global or LTE/CDMA. That is what is displayed on my N6 with a Verizon SIM card in it.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
---------- Post added at 02:50 PM ---------- Previous post was at 02:47 PM ----------
fast69mopar said:
When was the last time you fastboot flashed the factory images for the version of Android you are using? Who carrier are you with? When did this problem start for you?
Sent from my Nexus 6 using XDA-Developers mobile app
---------- Post added at 05:43 PM ---------- Previous post was at 04:58 PM ----------
Verizon does not have the option to select 2G/3G. You can select global or LTE/CDMA. That is what is displayed on my N6 with a Verizon SIM card in it.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
tmobile has the wcdma only(which is 2g/3g).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mohsin-* said:
.....Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
Click to expand...
Click to collapse
For the N6. there's a thread with TWRP flashable radio's.
http://forum.xda-developers.com/showthread.php?p=57411718/
this ia an older article, but it looks as verizon is killing off its 2G/3G networks.. http://money.cnn.com/2014/12/04/technology/mobile/verizon-killing-off-3g/
mohsin-* said:
Hello
Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
Click to expand...
Click to collapse
Flash modem and if you have a backup of your efs restore that... this worked for me to restore service.
Sent from my Nexus 6 using XDA-Developers mobile app
i was Flashed 6.0 than i was Able Select Gsm and all other but Phone was still No service ,
Badly i not have EFS Backup
I had this same problem, 2g or 3g would never stick, I installed gravity box through Xposed and if you go to smart radio section and set it to CDMA, it will give you 1x (2g ?) and if you set it to WCDMA it will give you 3g
mohsin-* said:
Hello
Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
Click to expand...
Click to collapse
Is CQAtest is running on your phone everytime you boot your phone
mohsin-* said:
Hello
Problem is No service , when i try Select 3g/2g it revert on LTE .
i have tried All Gsm and VZW Rom but issue is same , How to Fix it ?
Click to expand...
Click to collapse
Try this it helps me resolve my issue wich is same as yours go to settings and disable CQAtest in app manager and clear data then switch off you phone go to bootloader mode then select restart bootloader then start.
CQATest can't be disabled
This is a zombie thread. It been revived after 2 years
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers
I'm not getting VoWifi since the 4.03 update.. anyone else?
Tmobile US.
I've always had trouble at work, but it always worked at home.. seems to have stopped working @ home now too since I applied 4.0.3.
Curious to see if anyone else is having the same or different results.
thanks,
Mike
Was it ever there to begin with? I never got VoWifi to work
I have the same issue. I was able to get it working again but I needed to disable VoLTE and VoWiFi then reboot. Just enable VoWiFi and it seems to work now. Has for a couple days. For me WiFi calling was much more important than VoLTE. Hopefully the next release fixes it.
zim2dive said:
I'm not getting VoWifi since the 4.03 update.. anyone else?
Tmobile US.
I've always had trouble at work, but it always worked at home.. seems to have stopped working @ home now too since I applied 4.0.3.
Curious to see if anyone else is having the same or different results.
thanks,
Mike
Click to expand...
Click to collapse
I had the same issue Mike my phone was rooted running 4.0.2 and after flashing the 4.0.3 Through freedomos vowifi and volte stopped working, today I flash the OTA update 4.0.3 from the official 1+ web and I totally back to stock with stock recovery including, vowifi and volte working fine now and still working after rerooting
it works great for me... VoLTE and also VoWifi for Tmobile US. However, I think if you use unlocked bootloader and custom OOS roms, those might break the VoLTE and VoWifi features. Therefore now, i am back to stock, i need those more.
anhtin said:
it works great for me... VoLTE and also VoWifi for Tmobile US. However, I think if you use unlocked bootloader and custom OOS roms, those might break the VoLTE and VoWifi features. Therefore now, i am back to stock, i need those more.
Click to expand...
Click to collapse
why would bootloader matter? never had this issue with anyphone before , getting mine in a few days and want to know what to do
anhtin said:
it works great for me... VoLTE and also VoWifi for Tmobile US. However, I think if you use unlocked bootloader and custom OOS roms, those might break the VoLTE and VoWifi features. Therefore now, i am back to stock, i need those more.
Click to expand...
Click to collapse
My phone is rooted running 4.0.3 stock and ElementalX kernel with some modes everything works fine at the moment:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nevermind I just checked my settings and realized they're both disabled. it works but keeps switching between VoLTE and VoWIFI
okay.. let me try to unlock and root it again. Maybe cause of the custom Rom? FreedomOS?
UPDATE: WiFi calling on T-Mobile US is working after complete wipe and factory data reset.
I just got Oneplus 3T 5 days ago and not able to make WiFi calling works on T-Mobile US with Oxygen OS 4.0.3. I tried turning off VoLTE and WiFi Calling and then reboot, then turn on WiFi calling only as suggested in above post. It didn't work for me. Any other suggestion that I should try? Was it working on 4.0.2?
mine works fine on 4.0.3.. may be go to APN setting and reset to default and try again.
okay so my bootloader is unlocked and i was on stock rom, no root, vowifi works fine and i see the logo.
I installed supersu and i do not have vowifi logo anymore even tho it's enabled.
Does that mean that i'm not getting wifi calling?
I'm on freedomrom now, with T-Mobile US LTE APN selected and same behavior, vowifi is enabled but no logo
No issues here
joeyac02 said:
No issues here
Click to expand...
Click to collapse
are you rooted?
masri1987 said:
are you rooted?
Click to expand...
Click to collapse
Yes
joeyac02 said:
Yes
Click to expand...
Click to collapse
4.0.3? you get the wifi calling logo?
stock rom or freedom os?
Yes and yes
---------- Post added at 01:16 AM ---------- Previous post was at 01:16 AM ----------
masri1987 said:
are you rooted?
Click to expand...
Click to collapse
masri1987 said:
4.0.3? you get the wifi calling logo?
stock rom or freedom os?
Click to expand...
Click to collapse
Yes and yes
joeyac02 said:
Yes and yes
---------- Post added at 01:16 AM ---------- Previous post was at 01:16 AM ----------
Yes and yes
Click to expand...
Click to collapse
did you relock your bootloader?
I'm trying to figure out WTH, i stayed on stock rom rooted\with unlocked bootloader and TWRP for 2 full days and did not get a single icon for vowifi, any way i can verify i have it and it works?
4.0.3 Rooted with SuperSU, unlocked Bootloader, Franco Kernel (was working with the Stock Kernel)
Wifi Calling is working (with the logo showing, see attachment)
I can't seem to get it to work at all anymore..
unlocked bootloader, but never rooted, stock 4.0.3.
Last time I could get it to work by rebooting the phone.. but now that doesn't even work. I even have a Tmo supplied router (the AC1900 one) at home.
I am also getting constant MMS errors with 4.0.3 when I have Wifi enabled.
Sounds like I need to find time to save everything off and wipe the phone. Grrr.