Database Develop

HELP!!!!!!!!!!! pc rebooted during flash!

omg wtf do i do now?! my pc rebooted 31% into the flash.. it blue screened out of no where!

now its stuck on a IPL 2.21 screen!

this happened to me a few times as well. I just re-tried the flash from another machine and it worked fine.

but i cant establish a active-sync connection because the phone wont start it just stays at the 2.21 screen thats red/green/blue/white! omg im about to cry what do i do lol

I have seen the same screen, and have also had the computer blue screen on me probably 3 or 4 times now. When i plugged it into another machine with activesync, i ran the updater and it worked fine.

im trying it right now on 2nd pc still downloading the rom file tho

ok i was able to flash using another computer thank god!

:lol:

Can you post the steps of reflashing the wizard? I've tried a flash on another system, but it still doesn't work...
My steps:
1. Install Active Sync 4.1
2. Connect the wizard on usb
I've tried to downgrade the wizard with wizbackup. wizbackup need to flash IPL/SPL 1.01. The flash was ended without errors. But now the wizard starts and I only see the three colors and the version of IPL/SPL. Then I connect the wizard, Active Sync doesn't get a connection to the phone.
UPDATE:
In another thread I read that the wizard can't be flashed in IPL/SPL 1.01 without an OS. Can anyone verify this information or help me?
UPDATE II:
I finaly found out, that the phone can be restored with an image from the sd-card.
1. Put an image from the system to sd-card with psdwrite.exe
2. Power Off the phone and put in the sd-card
3. Power on the phone holding the camera key
4. Then the bootloader is coming up, press the voice key during 3s
5. The bootloader upgrades your phone from sd-card
Good luck!

that **** happens to me all the time, it always crashes to the boot loader and once its there you can just restart the upgrade no problem. if you need to boot into the boot loader then simply, from a turned off state, hit the wifi button, voice command button and power button, then release the power only and it will boot into the tri colored boot loader. then reinstall your image and soon you will be kickin it with your **** in it once again! booyakasha!
actually now that i think about it that will just go to the hard reset screen. you really just want to stick the stylus in the reset hole if you need to get to boot loader i think. i dont remember off hand.. just mess with it. if you break it just say you got it that way and exchange that ****

PHONE STUCK-white triangle with a screwdriver in it and a blue bar below (resolved)

hello all!
my phone was working properly (rooted but not boot unlocked)
pc companion told me there were a new version availlable (.253) I accepted, install, reboot, everything was fine.
I tried to backup my data in order to change the sd card to a bigger one...then it told me there was a problem while backuping so I did a reboot
this is where the problem begins:
now I have a white triangle with a screwdriver in it and a blue bar below it with an animation inside and it's stuck there...what does it mean for a start?
can you please help?
I'd like to recover it in order to get back my data (photos and video I wanted to put on the new sd card)
tried flashtool but it doesn't recognise the phone...
note: before doing all that, free space was low on my XZ internal storage (like 300 megs)

dave_id said:
hello all!
my phone was working properly (rooted but not boot unlocked)
pc companion told me there were a new version availlable (.253) I accepted, install, reboot, everything was fine.
I tried to backup my data in order to change the sd card to a bigger one...then it told me there was a problem while backuping so I did a reboot
this is where the problem begins:
now I have a white triangle with a screwdriver in it and a blue bar below it with an animation inside and it's stuck there...what does it mean for a start?
can you please help?
I'd like to recover it in order to get back my data (photos and video I wanted to put on the new sd card)
tried flashtool but it doesn't recognise the phone...
note: before doing all that, free space was low on my XZ internal storage (like 300 megs)
Click to expand...
Click to collapse
Unplug your phone from the USB cable and then start, see if that helps

This is exactly what I've encountered, can't find much help in the web, re-flash with wipe cache no joy, in the end re-flash with wipe data boot normally, last backup was 4 days old, restore and lost 4 days game progress...
Sent from my C6603 using XDA Premium HD app

That's strange.
Also had the same.
I updated to the .253 ROM and firmware etc and everything working fine.
I then rebooted after removing some system apps and got this.
I left it for a while and still stuck there.
Pressed a few buttons and still nothing then it suddenly rebooted (not sure if related to pressing the buttons or not) and everything was fine.
Then when it booted up it did the NFC firmware update so maybe related to that.
Not had it since and rebooted a few times.
Phil

thanks for replying guys.
problem really is that I can't use flashtool, for some reason I can't go in flashboot mode (green led right?)
and in fact I don't know all the key pressing procedures (if someone can post them all)
...but I think I got the press down and connect right, problem is that I have the green led for less than one second and then nothing...

dave_id said:
thanks for replying guys.
problem really is that I can't use flashtool, for some reason I can't go in flashboot mode (green led right?)
and in fact I don't know all the key pressing procedures (if someone can post them all)
...but I think I got the press down and connect right, problem is that I have the green led for less than one second and then nothing...
Click to expand...
Click to collapse
Hi,
I also encountered this when I tried to use the old root method of .253. (yah, stupid of me but managed to salvage)
Just let it run for like 20 minutes or so and it will reboot subsequently. (As long as the progress bar still move, you should be ok)
Seems like a self-recovery process in place I guess.

yeah I guess you're right , but the first time was so long (more than 20 minutes ) so I thought it was dead...it is obviously some kind of self repair,
because now after a lot of reboots it suddenly started correctly after 5minutes of this blue bar moving....and now working? WTF?
things that I did in case it could help:
-used flashtool beta 4
-flashed a base .434 in blind mode (choosed xperia Z in the list)
-went into flashboot (press down and then plug usb) I had the green light for just a second...(I also installed EMMA drivers from sony , don't know if it helped)
-reboot then wait (I put it also on the docking bay , don't know if it helped as well but it made the blue bar go faster it seems, not sure tho...)
I used "hard boot" also : just jkeep pressing up and the power button until it vibrates 3 times.
maybe just puting it on the dock and then wait (quite some time) is enough (and makes sense)

I just had the same issue - WTF!!!
I just let it sit there for a while and it automatically started.

This is f*** crazy smart (stupid) phone.
DOn't know exactly what my wife did, but I doubt she flashed anything:laugh:
The battery died, she conncted to the charger, most probably with pushing some of the volume buttons and phone booted into Triange mode. Now it's stuk in this mode since an our.
I did Hard reset, but after phone is plug into wall charger it automatically boots in Triange mode.
This is in stock ROM without any modifications, unlocking, anything.

esselite said:
This is f*** crazy smart (stupid) phone.
DOn't know exactly what my wife did, but I doubt she flashed anything:laugh:
The battery died, she conncted to the charger, most probably with pushing some of the volume buttons and phone booted into Triange mode. Now it's stuk in this mode since an our.
I did Hard reset, but after phone is plug into wall charger it automatically boots in Triange mode.
This is in stock ROM without any modifications, unlocking, anything.
Click to expand...
Click to collapse
Just wait - sometimes it takes a while but it'll eventually boot up.

I think [NUT] said somewhere that this is a repair of certain permissions by the phone itself. I've only ever had this for some minutes - but it is possible if the battery an out it could invoke this. Shouldn't be anything to worry about.
And I think fastboot is blue led - you could try flashmode.

I tend to do lots and lots of flashing and mods so I've seen it several times. The first time caught me by surprise and lasted for a long time...now I'm just used to it ..

In my case waiting in triangle mode did not helped. Was waiting 5 hours at work. I flashed with flashtool again stock ROM without wiping data and still no response.
FInally flashed with wipe and phone is running but all data gone. What a crap.

Dumb, Dumber and me

N900A (AT&T so no custom recovery).
Rom de la Vega worked fine, got root. Loaded some apps, some needing root, some not. Didn't trigger the 0x1, it''s still 0x0.
Everything worked fine until ... well, I don't remember exactly what I did, but it wasn't anything close to "stupidest move ever made". Phone now boots to the Samsung logo with the circles orbiting each other, then goes to the AT&T symbol with a few (about 4) bars of music, and stops. No soft keys (they do flash on for about half a second) and the home key does nothing.
If I wait a few seconds, it reboots, back to the unlocked lock, the "Custom", the Samsung orbits, etc. I assume that's a boot loop.
ADB doesn't see a device. I can boot into recovery (standard AT&T thing), download or standard boot, but ADB doesn't see any device. (The computer is set up correctly - plug my wife's N900A into the same cable and Kies reads it immediately.)
I've tried N900AUCUBMI1_OneClickBin and it seems to run properly, running Odin 3.09 after about 5 minutes. Press Start and the files start downloading. (Port 22, but I''ve learned not to argue with Win7 serial port assignments.) It finishes with all files listed and a green "passed". The pnone boots into the little green guy, then into the boot loop. This is with the original 16GB microSD, a clean 2GB microSD or none at all. I've cleared cache/system or not - same results.
I can't finish the rest of the procedure, because I can't put anything into internal storage - because the computer doesn't see the phone.
I'm at the end of my knowledge. I don't know how things are laid out in Android, so I don't know what to flash or if there's anything I can flash to fix anything.,
Oh - nothing shows on the computer - no Phone and no Card. If USB debug got turned off, I don't know of any way to turn it on from outside. I can't run any Android apps, of course. It I have to, I can install Linux on a partition on this laptop, but is there something I can do to just get back a plain working (preferably rooted) Note 3?
If not, I'm going to have to go back to the big blue and yellow place and feign stupidity, and hope all the boot looping articles will convince them that this is just another one.

You didn't update to the latest MJ 5 firmware, did you? ,accidentally and then try the one click to mi 1?
Sent from my SAMSUNG-SM-N900A using Tapatalk

tdamocles said:
You didn't update to the latest MJ 5 firmware, did you? ,accidentally and then try the one click to mi 1?
Click to expand...
Click to collapse
That's possible. I''ve been looking for links to MI5 and MI9 but with all the deleted links, I haven't been able to find any. All I have is MI1 and the MI9 file with the .tar.md5 files, which I'm reluctant to use, in case I cause a hard brick.

[Q] LG Optimus L90[LG DG415] stuck on logo

So I was just screwing around with my fonts folder(under system) and I replaced my custom font file for Roboto-Normal.ttf with the original Roboto font and when I rebooted my phone it got stuck on the LG logo and wouldn't advance after that. I also noticed while it was stuck on the LG logo if I hit any buttons in any combinations the phone would vibrate randomly. My phone is rooted with debugging on.

MrKidQuisine said:
So I was just screwing around with my fonts folder(under system) and I replaced my custom font file for Roboto-Normal.ttf with the original Roboto font and when I rebooted my phone it got stuck on the LG logo and wouldn't advance after that. I also noticed while it was stuck on the LG logo if I hit any buttons in any combinations the phone would vibrate randomly. My phone is rooted with debugging on.
Click to expand...
Click to collapse
Maybe the font was not compatible for your phone,If it was compatible for you it should apply and you should see it immeadiately,Rebooting is not required.
Try to connect the computer and Use the LG R&D Tool to flash the ROM.

androidvillage said:
Maybe the font was not compatible for your phone,If it was compatible for you it should apply and you should see it immeadiately,Rebooting is not required.
Try to connect the computer and Use the LG R&D Tool to flash the ROM.
Click to expand...
Click to collapse
No I wasn't using a custom font installer I was just putting a different font into the system root fonts folder and that ended up slowing down the phone so I restarted it and now its bootlooping.

MrKidQuisine said:
No I wasn't using a custom font installer I was just putting a different font into the system root fonts folder and that ended up slowing down the phone so I restarted it and now its bootlooping.
Click to expand...
Click to collapse
That's Because the font was written bad or the system cant render it because wrong format,that's why ended up slowing.
Turn off your phone,Hold Volume + And Plug it into USB.AndUse the LG Mobile Support Tool,Select CS_Emergency Mode and Flash...
Or if you could get into the phone into safemode,Fix it by replacing other font into the file.
That's only 2 way to fix your phone.

androidvillage said:
That's Because the font was written bad or the system cant render it because wrong format,that's why ended up slowing.
Turn off your phone,Hold Volume + And Plug it into USB.AndUse the LG Mobile Support Tool,Select CS_Emergency Mode and Flash...
Or if you could get into the phone into safemode,Fix it by replacing other font into the file.
That's only 2 way to fix your phone.
Click to expand...
Click to collapse
When I hold down volume up and power it just goes into the logo and if I continue to hold it it vibrates then immediately shuts off. Ive tried before to enter recovery mode on this phone but I think LG blocked it.

MrKidQuisine said:
When I hold down volume up and power it just goes into the logo and if I continue to hold it it vibrates then immediately shuts off. Ive tried before to enter recovery mode on this phone but I think LG blocked it.
Click to expand...
Click to collapse
Perform a factory reset. See this thread Q14.

I had a very similar problem that stemmed from trying to install a new font. When I tried a hard key factory reset, it did nothing to fix the bootloop. Rather, I think it made the phone impossible to reach with ADB by resetting the "debugging mode" setting along with everything else. My advice to you, though I haven't actually tried this because of the above problem, is to try to access your phone through ADB.
If that doesn't work, what I ended up doing was sending my phone to an LG service facility with a note attached detailing the problem and cause. They were able to restore it, despite it being rooted.

Update
Ok so I left my phone out unplugged for about and hour on the logo and it popped on so Im trying the same thing again but with the sim card in and if it works Im going to see if I can make the thing load faster by updating the permissions on the font file or using a font installer all together.

MrKidQuisine said:
Ok so I left my phone out unplugged for about and hour on the logo and it popped on so Im trying the same thing again but with the sim card in and if it works Im going to see if I can make the thing load faster by updating the permissions on the font file or using a font installer all together.
Click to expand...
Click to collapse
Still stuck in bootloop no other activity since restarting and puting in sim, I also about two hours ago took out the sim and restarted

similar problem
i was messing with the app chainfire 3d was prompted to install a graphics driver which and gave me a warning that it might brick my phone if it was not compatible so i said what the hell and proceeded now im stuck at lg logo with no clue on how to get it back to normal i am currently trying lg mobile support tool which seems to only stay at 10% been at it for about 15 min now not sure if just copying files or what im clueless on what to do im running rooted d415 stock rom my phone is on download mode right now

Same problem, different cause
I was installing an update to CM. In the recovery it said something about symlinks failed. I restarted, and now phone will get past the LG logo, but black screen. I can't access recovery either. In adb, I see the device, but it is unauthorized, and I obviously have no way to authorize it. Any way to fix this without sending it back?
Thanks in advance

Fixed it
I found a way to recover, but you must have a custom recovery.
Use the button shortcut for force reset. It will take you to recovery. From there you can restore or reinstall a rom.

black screen ???

lg g2 vsw980
when i trun on my phone its coming black no logo nothing work
but
if i put it in pc its coming to me many drives
how i fix it ?
i cant see anything its fully black and cant do anythings
how its coming to me like this ?
i install custom recovery and i told twrp goto recovery mode its coming to me like this
please help me to fix it

any idea to fix it ?

What happens if you long press the power button?

if i click on the power its only light and black screen then i dont know be off or on becouse there is no logo

I'm having the same issue. I rooted my phone over a year ago and have been changing ROMs on it. The last one I installed was Cloudy and after a few weeks I noticed my 4g stopped working. Thought it was a SIM card, but it was replaced and Verizon said it's because I'm rooted. I was running some fast boot commands and after one of the(not sure which one) my phone only boots to a black screen. If you hold the power button down you can feel it vibrate like it's turning on but it doesn't, can't boot in to any mode. Once it connects to the pc it maps like 6 drives and it's asking me to Format. Under one drive it has an Image folder with some random files. If you go to device manager it show as qhsusb_bulk. I'm pretty sure I'm screwed. I tried running fastboot via command line, but every command says <waiting for device>. In the meantime I had to switch to my old Thunderbolt.

did you fix it and how to fix it please help me

http://forum.xda-developers.com/showthread.php?t=2582142

smr1619 said:
I'm having the same issue. I rooted my phone over a year ago and have been changing ROMs on it. The last one I installed was Cloudy and after a few weeks I noticed my 4g stopped working. Thought it was a SIM card, but it was replaced and Verizon said it's because I'm rooted. I was running some fast boot commands and after one of the(not sure which one) my phone only boots to a black screen. If you hold the power button down you can feel it vibrate like it's turning on but it doesn't, can't boot in to any mode. Once it connects to the pc it maps like 6 drives and it's asking me to Format. Under one drive it has an Image folder with some random files. If you go to device manager it show as qhsusb_bulk. I'm pretty sure I'm screwed. I tried running fastboot via command line, but every command says <waiting for device>. In the meantime I had to switch to my old Thunderbolt.
Click to expand...
Click to collapse
I'm in the same situation. My screen is black. pressing buttons the phone would vibrate and red led shows but can't get into download nor fastboot mode anymore.

http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627

smr1619 said:
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
Click to expand...
Click to collapse
Thanks for the link but I don't have linux pc

i followed these steps on my phone on a Windows pc. After I got my phone to come up I had to use the lg flash tool and then it updated my phone to the latest andriod OS

any other way to fix my problem ???
please iam doing everything but it not work for me
right now iam install new ubuntu to fix my problem