Related
Just wondering, since some of the newer tablets let you hook up mini usb devices to it and so. Was wondering if there had been any adapters yet or so for us streak 7 users? Would be cool to get a wired controller hooked up and so.
You would need an OTG cable to do that, as dell doesnt make any you will have to make your own or use the HDMI dock.
Well I have the HDMI Dock, so I could use the dock then insert the usb device to that? Was thinking about getting that Logitech F710 with that usb dongle, heard it had support for android. What else would I need? Or hows that work fully.
As for the non dock part, has anyone made a cable yet to work?
if your device had a usb-a connector you have no choice then but to make a cable.
the sixaxis/ds3 uses a mini usb connector and might work though usb,
I know it and the wiimote will work over bt, with the wiimote being the easier to pair one.
Well I have the wiimote working fine, Issue there is.. Yea.. Battery drain on that remote. So figured maybe getting a adapter. I guess I need a USB to Mini micro usb? (The new style mini usb thing.. man I miss the old big RAZR size ones) How many of you have used a HID device or so on android or the streak 7?
you'd need to splice together the dock connector to preferably a USB-A female port, it'd be the most useful as you'd have a cable that could accept anything, but it'd mean you'd always need a minimum of 2 cables.
You'd also have to dissemble to dock connector itself i believe as the OTG pins are different from what's wired in the normal sync/charge cables, you cant simply cut the cable and rewire it, you'd prob have to cut the dock connector open and resolder
If you made a dock to micro usb connector it'd only accept devices that have a micro usb port on it.
Keep in mind usb mode means that the controller would be drawing power from the device itself, while controllers dont draw that much, it's still something to point out
Wouldnt this be all I need?
http://www.amazon.com/USB-Female-Mini-Male-Adapter/dp/B0016RNX2I/ref=pd_sbs_e_4
Would take the normal size usb dongle or cord, fits into the USB slot of the dock itself.
I havnt actually tried it but it sounds like that should work, i know that port is designed for otg connections so i'd assume it'd take care of the hard work.
When on 2.2.2 Did I need a special program for this to work? I know 3.x had native support. Just wondering. =) (Or can any game/emulator with key remapping auto detect)
if it's anything like the hoops needed for the s5 on 2.2.x yes, unless dell included their own code stuff to make it work, then i'm not sure.
I've never attached a controller to anything, wired or not so I can only say that much
Wonder what the app would be called or so, anyone know? I mean I ordered the part, should be here in a few days, then I can report any tests I have with a Rumblepad 2.
Ok tested it out, So far nada. Dont know if its even supposed to work.
Has anyone here hooked a wired controller up to their android? Running Honeycomb now too.
I know people talk about the F710, which I wonder if that works cause its battery powered?
So what's the verdict guys? Can a controller or other USB device be connected to the mini USB port on the docking station and work? If not, will it work if you plug in a mini USB OTG cable (like this one http://www.ebay.com/itm/Mini-USB-Re...757?pt=LH_DefaultDomain_0&hash=item3a6edf5335) into the docking station and then plug the controller into the OTG cable?
So far my verdict is nada.. dont think its supplying power to the usb ports. Now its been said that adapter based ones may work, something where controller is powered by batteries. Tho again. No one ever gives a real confirm.
My next area to branch out is http://www.onlive.com/controller 50$ but you can use a adapter for the pc. However it also works with bluetooth, something that the tablet DOES support and no adapter needed. Since I have the onlive app, least it will work 100% for THAT. Once my tax money comes in, Ill order the controller and see if it can work on emulators and so too. least then we will have 1 solid answer that has some good use. (Since honestly, onlive on the tablet really isnt bad at all!)
Why not bluetooth your ps3 controller though the sixaxis app on the market thats what I've done works great
Sent from my Dell Streak 7 using xda app-developers app
I have used my Wii remote that way
Sent from my Nexus 7 using Tapatalk 2
To answer both. If I am not mistaken. PS3 controllers have to be "paired". Which means when you wanna play PS3 or Tablet.. got to re-pair them all the time, correct?
Wii-Motes I know you dont have to re-pair them. However.. one thing I hate... that to use the classic controller.. you need to have the Wiimote laying around somewhere.. then the cable for classic. Seems bulky for normal use.
Both controllers all are battery too. Would be nice for wired solutions. If I do anything wireless, I may as well get that Onlive controller with BT support.
If you have a sixaxis/DS3 dedicated to non-ps3 use: you only have to re-pair it every time you want to use it on a different device.
The sixaxis/ds3 do work in usb mode, at least on pcs. I dont recall if there's a solution to use it in usb mode on android (though i'd imagine it should, as usb mode is trivial to enable)
If you only have a single device to use it with, you only ever need to pair it once and then you're done.
Well, I finally went and tried hooking up a usb hub to my S7, and my results were absolute failures.
I bought an OTG <-> dell 30 pin a while back and a standard OTG <-> dock cable.
I dont have a baseline as I dont know offhand which kernels are specifically tested to work.
It seems to enable the hub (by enable I mean it powers up on detection of a host, it's wall powered)
on my S5 with ICS/Phoenix kernal (which is known to support usb hosting), but nada on my S7 with ICS B4/mod and stock 514.
Can anyone explicitly confirm that the b4 and stock kernals work with host?
I'm pretty sure nothing is happening on either of those, and as it works fine on my S7 it's definitely not bad cables/hardware.
Edit: at least the S5 is even capable of powering the hub itself, and with a dock it can charge at the same time. If it wernt for the terrible HDMI out on it, it would be a full on android pc with the dock.
The S7 on the other hand: I still cant get anything, remotely powered or self powered: it gives no response
I can tell you, yes, ICS kernel does have otg drivers but may not provide power to those devices.
Sent from my Nexus 7 using Tapatalk 2
like most MHL cables that include the charging port (where you just plug in from wall), is there anything like this for OTG??
tried finding and searching but nothing.....
If you're looking for power going to the USB device, then you can use this.
If you want to charge your Note while using the OTG feature, then I've not yet come across anything like that.
Just wondering if it is possible to charge the Note 2 while using the OTG yet? I'm in my car all the time and use an external SD card. My 64gig internal card is already full.
cajunflavoredbob said:
If you're looking for power going to the USB device, then you can use this.
If you want to charge your Note while using the OTG feature, then I've not yet come across anything like that.
Click to expand...
Click to collapse
How about a scenario where I have External Battery charger and OTG adapter with usb stick. I want to watch the movie on usb stick while also have External battery connected charging the phone. I guess it's the same problem as not being able to charge up phone from any external source while using another device connected to OTG?
vectron said:
How about a scenario where I have External Battery charger and OTG adapter with usb stick. I want to watch the movie on usb stick while also have External battery connected charging the phone. I guess it's the same problem as not being able to charge up phone from any external source while using another device connected to OTG?
Click to expand...
Click to collapse
You could make your own micro USB OTG cable. I still haven't seen one for sale anywhere.
cajunflavoredbob said:
You could make your own micro USB OTG cable. I still haven't seen one for sale anywhere.
Click to expand...
Click to collapse
Oh, I don't have issues with OTG cables. I have adapter and cables, and modified cables before: http://forum.xda-developers.com/showthread.php?t=2107985
I just want to figure out how I can watch movie from usb-stick while charging my phone at the same time. There seems to be no solution for that yet? Or are you suggesting there is a way to make a custom cable to do that? I think once you attach OTG cable to connect a peripheral device, you turn Note 2 into host and it will not accept charging from micro-usb port. No way around it
vectron said:
Oh, I don't have issues with OTG cables. I have adapter and cables, and modified cables before: http://forum.xda-developers.com/showthread.php?t=2107985
I just want to figure out how I can watch movie from usb-stick while charging my phone at the same time. There seems to be no solution for that yet? Or are you suggesting there is a way to make a custom cable to do that? I think once you attach OTG cable to connect a peripheral device, you turn Note 2 into host and it will not accept charging from micro-usb port. No way around it
Click to expand...
Click to collapse
Oh, I understand what you mean now. In that case, you are correct. You cannot charge your phone and use an external thumb drive at the same time through the usb port. When you plug in an external drive, your phone switches the USB power cables to send the juice instead of receive it.
The only ways I know around that are to use a wireless charge stand or the desk dock.
cajunflavoredbob said:
Oh, I understand what you mean now. In that case, you are correct. You cannot charge your phone and use an external thumb drive at the same time through the usb port. When you plug in an external drive, your phone switches the USB power cables to send the juice instead of receive it.
The only ways I know around that are to use a wireless charge stand or the desk dock.
Click to expand...
Click to collapse
Isn't this exactly what sammys smartdock does? Charge and otg simultaneously?
farfromovin said:
Isn't this exactly what sammys smartdock does? Charge and otg simultaneously?
Click to expand...
Click to collapse
Yep. Not possible with just a cable. It needs a microprocessor to regulate the current in and out. Devices plugged into the dock are powered by the dock's power, not the phone's.
cajunflavoredbob said:
Yep. Not possible with just a cable. It needs a microprocessor to regulate the current in and out. Devices plugged into the dock are powered by the dock's power, not the phone's.
Click to expand...
Click to collapse
I hear what your saying, but looking at threads in the S3 section like this one: http://forum.xda-developers.com/showthread.php?t=1953061 got me thinking... I'm just trying to make an audio cable for my car that charges and has 3.5mm out to my radio. And I need it to work with every 4.1.X kernel and above, especially stock.
farfromovin said:
I hear what your saying, but looking at threads in the S3 section like this one: http://forum.xda-developers.com/showthread.php?t=1953061 got me thinking... I'm just trying to make an audio cable for my car that charges and has 3.5mm out to my radio. And I need it to work with every 4.1.X kernel and above, especially stock.
Click to expand...
Click to collapse
If you get a pinout for the s3, might be able to modify a cable to do both.
Hi,
As you know, the Nexus 4 doesn't support USB OTG, meaning you can't use it with USB drives, gamepads, etc.. One reason is that the device doesn't seem to provide the neccessary 5V, the other reason is that it's not supported by the kernel.
So, I've been digging a bit, and now I can claim partial success! It's possible to supply the 5V yourself, and then activate USB host mode manually. It's a bit cumbersome, but for the beginning better than nothing. I tried a mouse and USB drives.
I should warn you that this is just a proof of concept and nothing that you'll want to use on a daily basis. Regular USB doesn't work properly while running this kernel, and I haven't checked battery consumption. Also this is based on Android 4.2.1, and if you have 4.2.2 you might not be able to make calls. That shouldn't be a problem as this is for testing only, though. Just let me say, I can't guarantee for anything, and I'm not responsible if you brick or blow up your phone.
You'll need:
- A USB OTG cable
- A USB Y cable to provide the 5V (It has two USB-A plugs and one USB-A socket.)
- My custom kernel
- Unlocked bootloader
- Android developer tools (adb, fastboot)
Load the boot image on your phone (this is not permantent):
Code:
$ fastboot boot myboot.img
Connect everything as follows (should be obvious):
- Y cable power plug (typically red) to the PC or adapter
- Other Y cable plug into the OTG cable
- OTG cable into the phone
- USB device into the Y cable socket
You need a remote shell on your device. Use adbWireless or similar to enable ADB over WiFi, then do:
Code:
$ adb connect 192.168.0.108:5555
(or whatever your phone's IP is)
$ adb shell
Now you should be on your phone. Do
Code:
[email protected]:/ $ ls /sys/kernel/debug/msm_otg/
and you should see 'mode' if the new kernel works. Now become superuser and enable USB host mode:
Code:
[email protected]:/ $ su
[email protected]:/ $ echo host > /sys/kernel/debug/msm_otg/mode
To disable USB host mode, use "none" or "peripheral". Note that at this point, I couldn't get it to go into regular USB mode. This means that MTP and adb over USB doesn't work yet.
Connect a device, and you should see more than two entries under "lsusb". Congratulations, your Nexus 4 has just recognized it's first USB device! If you install Stickmount (you have to sideload it since it's marked as not compatible), you can mount USB flash drives. Nexus Media Importer doesn't seem to work, though.
How does this work?
Basically, I just added the following line to the beginning of msm_otg_debugfs_init in msm_otg.c:
Code:
motg->pdata->otg_control = OTG_USER_CONTROL;
This enables the mode file in debugfs I use for mode switching. The next step would be to enable manual mode switching while keeping regular USB support, which shouldn't be too hard. Later down the line we can think about switching automatically on cable insertion, and maybe event getting 5V out of the device, but that would be a lot harder.
So, try it out, let me know if it works for you, and feel free to tinker around and improve what I've got!
Nice to see some progress going. Only thing that irks me is the Y cable though, kinda defeats the purpose of OTG to me...
Thanks a bunch for your work though!
Sent from my Nexus 4 using xda premium
You are a genius. :good:
Just connected a powered USB-HUB and a mouse to my OTG cable, flashed the kernel and typed the commands directly with a terminal app on the device.
It simply works !!!
Awesome development, one of my biggest gripes was the lack of USB OTG, I just assumed it was included as stock, that's why part of the reason I purchased this device.
This is awesome. Going to have to order some cables now. Since we have to supply power anyway, is it possible to support usb-otg + charging? Figure the phone is "too thin" anyway... I'll probably be making a 64gb microsdxc + battery case for the phone. Hello extended battery life.
Great work, I was just looking for this yesterday. Would it work with a USB dac (Assuming I had a powered usb hub)? Just asking because I think usb audio is often overlooked, and I would really like to have it.
Nice!
It would also be interesting to see if the slimport adapter allows otg pass through (their website says it does)... Then that's HDMI +charging +mouse/keyboard. Even miracast + mouse/keyboard would be awesome
Sent from my Nexus 4 using Tapatalk 2
Flynny75 said:
Even miracast + mouse/keyboard would be awesome
Click to expand...
Click to collapse
we've already got that, haven't we?
Finally! Now I will get to use my 1TB Portable HDD!!
My 8 gig is FREE! Lol
Sent from my Nexus 4 using Tapatalk 2
I'd like to be sure I'm getting a good USB Y cable. I see a few on Amazon, some have the word 'Power' in them, some don't. Most don't have a red plug. Are there some specific characteristics I should look for in the description to know that it's suitable for this purpose?
Here's one example that does NOT say 'Power' in its description.
http://www.amazon.com/OEM-UTStarcom-USB-Adapter-Cable/dp/B002W8EDOM/ref=pd_sim_e_2
Thanks, CaptainMuon, for your terrific work!
EDIT: After reading Scorpio16v"s post (and watching his video...thank you!), I thought I would try with a powered hub, since I don't have the Y cable. Also, I used the terminal emulator instead of adb, as he suggested. YES! It worked with a USB micro sd card reader adapter (I had bought it from ebay specifically for this Nexus 4 since I knew there was no sd card slot). That required stickmount, as CaptainMuon mentioned. Then I tried a USB mouse, and that worked also. This is great!
I'd still like to know more about the Y cable, as I asked above, even though this other method worked well for me.
Wonderful!!
R: Manual USB OTG working
Can the USB hub be non powered?
Inviato dal mio Nexus 4
Cice96 said:
Can the USB hub be non powered?
Inviato dal mio Nexus 4
Click to expand...
Click to collapse
When I powered off my USB powered hub, neither the USB Micro SD or the USB mouse worked.
Greaaatt news and excellent development on this front sir.
I was eagerly waiting for someone to come up with a solution to this topic.
But coming back I've read in so many places that a kernel can be tweaked so as to supply 5V to the socket!!(I'm considering that is the problem here. With power supply its working).
??
Sent from my Nexus 4 using xda app-developers app
Awesome, my one gripe with the phone is now (almost) gone!:good:
Any chance it it'll work with non-OTG cables/adapters (The plain USB host ones which don't have that extra pin)?
Just posting to thank you for all the time and effort you must of put in.
ziddey said:
This is awesome. Going to have to order some cables now. Since we have to supply power anyway, is it possible to support usb-otg + charging? Figure the phone is "too thin" anyway... I'll probably be making a 64gb microsdxc + battery case for the phone. Hello extended battery life.
Click to expand...
Click to collapse
It seems to be charging in USB host mode. (In my Y cable, the +5V line connects all three plugs, so the phone gets juice too. Not sure if that's always the case.) We have to do some testing to see if it charges at normal speed, etc.
eiriklf said:
Great work, I was just looking for this yesterday. Would it work with a USB dac (Assuming I had a powered usb hub)? Just asking because I think usb audio is often overlooked, and I would really like to have it.
Click to expand...
Click to collapse
I guess, if it is supported on any other android device, it should be possible here. Would be great if someone with a DAC would try it!
Flynny75 said:
It would also be interesting to see if the slimport adapter allows otg pass through (their website says it does)... Then that's HDMI +charging +mouse/keyboard. Even miracast + mouse/keyboard would be awesome
Click to expand...
Click to collapse
Dito. If someone has such an adapter, I'd be excited to know if it works.
sga999 said:
I'd like to be sure I'm getting a good USB Y cable. I see a few on Amazon, some have the word 'Power' in them, some don't. Most don't have a red plug. Are there some specific characteristics I should look for in the description to know that it's suitable for this purpose?
Here's one example that does NOT say 'Power' in its description.
http://www.amazon.com/OEM-UTStarcom-USB-Adapter-Cable/dp/B002W8EDOM/ref=pd_sim_e_2
Click to expand...
Click to collapse
Hmm, I don't know how you could make a Y cable that doesn't provide power from one end, and data from the other . It should work, but I know there are a lot of scam/poor quality cables out there, so I can't guarantee it. I've got this one:
http://www.amazon.de/Delock-Adapter...=sr_1_4?s=ce-de&ie=UTF8&qid=1361096352&sr=1-4
Yes good through bro...well done
But ohhhh man...i hate to use extra stuff like y cable and a powersource....
F**k google
Sent from my Nexus 4 using Tapatalk 2
you should post this to development section ;
let's see if other dev can also contribute to make a nice working kernel with these stuff;
without any bugs you had mention above.
BTW ;
Nice work Bro. :good:
by the way ; i can use my powerbanks as the power source. so i don't need any land electric sources.
not yet try it, i will need to find the XY cable first ( non powered USB Hub will do fine, and powered by the 11000Mah Powerbanks )
Does the USB port have any other function other than power?
Don't think so, only power AFAIK.
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
UPDATE: The USB cable that comes with it may not work for data transfer, tried it with my phone and it didn't work. So I tried a normal microUSB cable but still nothing.
spunker88 said:
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
Click to expand...
Click to collapse
If we could plug a mouse or keyboard into it would be great!!
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
It has bluetooth... so in theory that could be a simple alternative... we just need to figure out how to access hidden menus.
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Universal Charger
Universal Charger:victory:
Examining board
Based on examining the photos of the motherboard on ifixit.com...
Component EM1 appears to be a USB Common Mode Choke. That goes on the D+/D- pair which you can see routed from the USB port, so it wouldn't be present if there wasn't some use for data communication over the USB port. (Cost sensitive equipment.) The flip side of the PCBA shows TP1-TP20 (Where TP19 and TP20 appear to be GND). My guess is in that mix you have a JTAG port for programming/testing the unit initially with a pogo pin rig (evidenced by the dimples observed in each of those locations), and there might be more high/low GPIO pins where one might allow the unit to enter its USB data mode.
-Jon
ften said:
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Click to expand...
Click to collapse
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
mustang_52 said:
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
OneAn9ryN00b said:
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
Click to expand...
Click to collapse
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
Click to expand...
Click to collapse
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
spunker88 said:
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
Click to expand...
Click to collapse
I ordered this cable http://r.ebay.com/QgwBIW Will report back if it works when I get it.
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
Click to expand...
Click to collapse
I also bought that powered OTG cable off Amazon and it will power the Chromecast as well as provide the means to flash the Chromecast via a USB thumbdrive. When you apply power to the Chromecast, it automatically flashed the bin from the USB drive. There was no interaction required (or even possible). Of course this was on the original firmware - if your Chromecast updated itself, you have lost the ability to root the device at this time.
Clearly the Chromecast does sense the USB drive and pulls data from it during the initial boot sequence. However I'm not sure if it would ever work for other devices such as keyboards or storage devices, etc.
I'm not sure why anyone would want to hook those types of devices up to the Chromecast however. Once you have root, you can telnet into the device, so adding a keyboard doesn't seem that important. The whole idea of the device is that you send it media from other devices and control it via that other device. Adding storage for example doesn't seem important since it can pull media off the network already (ie a NAS or another computer).
Anyway. That has been my experience with it so far. It's a long winded answer to more than just your question about the OTG plug.
I would personally love the ability to send audio out without having an hdmi TV be on through the usb somehow...
Sent from my Nexus 7 using Tapatalk 4
USB Tethering not working - SGH-i997
Hi all,
i have install Avatar 7.0 to my Samsung SGH-i997 from "http://forum.xda-developers.com/showthread.php?t=2174227". it's look cool.
But when i am trying to USB Tethering, the massage shows as "Unfortunately,Setting has Stopped".
how to Fix this issue.
Didn't know we had our own thread now.
Anyways so I've been trying to hook my active up to my monitor -- an ASUS VX238H -- and I finally got the correct MHL to HDMI adapter, but I still can't get it to work and I've tried three different HDMI cables. With this Sypder C Class cable and this Belkin cable I have the phone would detect being plugged up to the HDMI, but the monitor wouldn't recognize it, and with this off brand cable when I plug it in my monitor goes black (and it has two HDMI inputs with my computer plugged into HDMI1 and the phone plugged into HDMI2). Is there a specific cable I need or perhaps cables without a specific feature (such as Ethernet)?
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
From what I read that was only needed for wireless connections and that HDMI connections didn't need that. Guess I'll give it a shot after work and see if that is the issue, but still I don't understand why the one cable would cause my monitor to go black despite me not having selected the HDMI2 input...
I have a cable left over from my Motorola Atrix 4G. I will give it a try tonight to see if I get any better results.
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
Ok so I tried enabling Screen Mirroring but it told me to disconnect the HDMI cable first. Guess I'll just have to wait till I get paid again and get a different HDMI cable to try with (one without Ethernet) and see if I have better results.
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
dibeachdude said:
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
Click to expand...
Click to collapse
I had posted in the S4 QA section there are two different types of MHL-HDMI adapters.
A 5-pin variation for the older generation of phones like the S2 and the Infuse.
A 11-pin variation for the newer generation of phones like the S3 and S4.
The adapter does need some power to power it since it is an electronic device but not much. The rest of the power that's not used by the adapter is used to charge the phone.
I initially bought a 5-pin adapter because I didn't research enough before hand (it was a bit of an impulse buy) and so I didn't know there were two different types. I then bought an official Samsung MHL-HDMI 11-pin adpater which is what I've been using now.
I really think the issue is with the cables I'm trying to use so when I do get paid again I'm going to buy a HDMI cable with just the base A/V transfer and see if that works.
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. It has a completely different plug on it. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to get the proper cable and try it. I have always thought that it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
dibeachdude said:
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. The one that I have is an entirely different interface. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to the proper cable and try it. I have always that the it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
Click to expand...
Click to collapse
That's the one I have now.
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
dibeachdude said:
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
Click to expand...
Click to collapse
Are you using a HDMI cable with Ethernet or just an A/V HDMI cable? All the HDMI cables I have have Ethernet except maybe my 360 HDMI cable. I'm going to order this other cable online and try with that and if it doesn't work then I'm just going to assume my monitor is like what you said. Just a fyi it's supposed to support 1080p.
Ok just thought I'd provide an update. I got the Belkin A/V (no Ethernet) cable in today and it too didn't work so I'm just going to chalk it up to my monitor not supporting the MHL signal. I suppose I shouldn't be too surprised since it is a computer monitor after all.