my xperia sp rebooted with faded colours after flashing latest doomkernel - Xperia SP Q&A, Help & Troubleshooting

as related to the topic, recently i flashed the kernel using fastboot as the developer told to do so... and after the process finished, the phone rebooted and as normal, the intro logo will pop up but my xperia's colours become faded to black and restarting... now it is likely happening in loops because it keeps repeating... help me pls :crying:

I have a similar problem after I flashed nayakkernel on cm11.My phone reboots normally but the screen is crazy - its only red and green or pink and green and the DPI is set very high.Im also unable to boot in recovery.

It was the same with mine too..but then I flashed CM13 and now the phone runs smoother

Related

[Solved]Phone not booting or charging or going into recovery

Recenty I flashed latest nightly Avatar and NX kernel
And I was texting and the battery died. Screen went blank like its supposed to on battery drain but I could hear a low sound (notification) for a few secs then it died. Now phone won't boot . It passes the samsung logo then goes blank. So I flashed safe kernel to get stable rom but can't boot into recovery mode. DOWNLOAD mode is working.
Also it won't charge. The charging icon is just stuck on loading symbol but not showing green bar progress.
I don't understand what happened
How do I fix this?
help! :crying:
Solved
....
titus1 said:
....
Click to expand...
Click to collapse
What?
How did you solve this? I'm running NXT kernel and Rootbox. My phone went flat ,tried charging but just shows empty battery logo. Just wont boot or go into recovery

[Q] Untypical Xperia Z brick, urgent help needed

Hi, I know there were many similar topics but this case looks different. I've tried to update my xperia Z using PcCompanion (to newest available kitkat) during flashing i got an error and all I saw after turning it on was grey triangle with warning. PC companion see my phone but cannot repair it (I got error 100), during flashing three different OFW in flashtool it always stucks on kernel or system flashing (excluding them in installation make possible for flashtool to finish the job) It gives constant blue light in fastbot mode but when i'm connecting it in flash mode it only blinks green and then red for a second each and remains black. I can make force shutdown only when it's in charger and being in charger it only blinks with red light and when I want to turn it on it only vibrate once and do and show nothing. It was not rooted, has locked bootloader and battery over 60 % full. Now after a long fight it has unlocked bootloader, custom kernel with recovery acces and installed (i think) custom rom, but when i turn the phone on (what happens only when it's connected to charger) i see grey warning triangle and I'm stuck. Does anyone can help ?

[Q] NEW black screen of ...death ??

Hi guys I have a stock xperia z1 I havent done anything with it except rooting it when it was in Kitkat
After updating it today to Lolipop through the Sony Pc Companion, I have the following issue:
When i turn on the phone nothing happens, the screen is black... I Can hear the startup sound of the boot screen or sony logo whatever...
But the screen is absoluteley black till it finishes loading and boots into android then the screen comes back to life and everything works normally !!!
I do not understand how come it is black for the whole bootup process then normal once it is in android! I tried to do a repair/ factory reset etc... but i still get the same thing either way...
Any Ideas?
firas1886 said:
Hi guys I have a stock xperia z1 I havent done anything with it except rooting it when it was in Kitkat
After updating it today to Lolipop through the Sony Pc Companion, I have the following issue:
When i turn on the phone nothing happens, the screen is black... I Can hear the startup sound of the boot screen or sony logo whatever...
But the screen is absoluteley black till it finishes loading and boots into android then the screen comes back to life and everything works normally !!!
I do not understand how come it is black for the whole bootup process then normal once it is in android! I tried to do a repair/ factory reset etc... but i still get the same thing either way...
Any Ideas?
Click to expand...
Click to collapse
Try to flash 5.0.2 ftf for your phone via flash tool...

[Q] S3 Mini | No Recovery Mode | No Bootup logo but colors instead

Hey guys, i had lollipop 5.0 (CWM12) on my phone, but it was kinda slow for me (only 200mb ram) and i wanted to do a factory reset (from settings) and my whole phone ****ed up after it, it was looping the TWRP screen, kinda bootloop but for recovery mode, after hardly i could reflash a rom from PC with odin (same 5.0 rom) but now, when i start the phone, i don't see the basic startup logo just some ****ed up colors like red, blue, yellow etc, after it disappears and phones start up, after startup i get a lot of "Stopped Working" errors (maybe because i didn't install google apps, cuz i cant). When i wan't to boot into recovery mod, i only see those ****ed up colors stuck, and nothing happens. Any idea? I would really really appreciate it!
CoreyHUN said:
Hey guys, i had lollipop 5.0 (CWM12) on my phone, but it was kinda slow for me (only 200mb ram) and i wanted to do a factory reset (from settings) and my whole phone ****ed up after it, it was looping the TWRP screen, kinda bootloop but for recovery mode, after hardly i could reflash a rom from PC with odin (same 5.0 rom) but now, when i start the phone, i don't see the basic startup logo just some ****ed up colors like red, blue, yellow etc, after it disappears and phones start up, after startup i get a lot of "Stopped Working" errors (maybe because i didn't install google apps, cuz i cant). When i wan't to boot into recovery mod, i only see those ****ed up colors stuck, and nothing happens. Any idea? I would really really appreciate it!
Click to expand...
Click to collapse
Flash the original bootlogo, here

Black screen after factory reset

Hi all. I have Honor 3c international version with official Kit-Kat rom. I factory reset it using TWRP v 2.8.6.0 and after rebooting, phone showed my huawei logo and then after some time the screen went black. Almost 10 minutes later a white box appeared showing that it is upgrading and the files are being optimized but the phone got stuck on "Finishing Boot". Then the screen went black again. Phone didn't vibrate or reboot during all this. Its been happening since yesterday and i can't get past this black screen. Help please.
Flash stock rom via spft

Categories

Resources