Database Develop

Dualboot for i9295[a touch of Freedom] :)

IMPORTANT! This is NOT my work, all credits to the Genius chenxiaolong who made this available for all Galaxy S4 Variants
See original Thread [PATCHER][APP] Dual boot any ROM on all Galaxy S4 variants!
The Story:
I don´t like Touchwiz very much but for some Reasons I always have to come back to it. Maybe the Camera, sometimes the Allshare Features for Smart TV...Everybody has his Reasons to use/need it sometimes...
Untill today, I had to backup/restore between Sammy and Cyanogenmod a lot, It bugged me but I thought there is no choice till I found this Thread. First, I was a little afraid because there is a lot of Information in the OP and some stuff to do but then I thought, what may happen? Bootloop, Odin, Hard-brick,naaah, what´s Life without a little risk?
So I tried and it works !
If you want to do what I did, just follow these (very easy) Instructions.
Think about what your doing. This is your very own Device with your very own contract so please proceed at your very own risk! I have tested this exactly the way it is written down here and it worked. So if something goes wrong on your Device, don´t blame me or the Developer of this fantastic App!!
...Make sure your an owner of the international Samsung Galaxy S4 Active (i9295) (if not, tell me what happened )
...If your on a stock Sammy Rom, make sure that you are rooted and have a custom recovery installed...
...Also, you will need to delete some System Apps to free Space for secondary Rom but please don´t ask me which. There is enough Bloatware inside but a good start for me always is "HRS Hotels", "Google Maps/Mail/Plus" and so on...
1. Download the 3 Files from chenxiaolong´s Thread (not linked but you will find it...remember, this is NOT my work!)
- Dualboot Patcher
- Dualboot Switcher App
- Dualbootutility.zip
2. Download the custom Rom of your choice. In my case, I used
cm-10.2-20131227-UNOFFICIAL-jactiveltexx.zip
and official Gapps
3. Install the Dualboot Patcher and run it on your Device
4. Follow its Instructions to patch your custom Rom and, if needed, also the Gapps
5. Install the Dualboot Switcher App and run it
6. Set current Kernel as "Primary ROM´s Kernel"
7. Reboot into recovery
8. Flash your patched Rom File(s)
9. Reboot (the Device will NOW boot into secondary Rom!)
10. Install Dualboot Switcher App in 2nd Rom
11. Now you can choose between primary and secondary Rom to boot
12. Done
Please press THANKS in original Thread and, if you can, donate some to chenxiaolong because this is awesome!!!
Easy, isn´t it? Yes, it is. It is exactly what I was looking for because now I can use both worlds, the beautiful and the beast
English wasn´t my Mother´s language so please excuse me for mistakes you surely will find
Greetings
Thomas

I have uploaded patched Gapps and a patched Cyanogenmod Rom here. Feel free to use
cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
and
gapps-jb-20130813-signed_dualboot.zip
Greetings
Thomas

At what point to flash the 2nd ROM?
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much

marcelser said:
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much
Click to expand...
Click to collapse
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
This should be the 2nd step in OP then, so just continue with the list
But don´t forget to delete some Files from /system of the Stock Rom to have enough Space for both Rom inside the /system Folder of your Device.
I hope that helped ?
Greetings
Thomas

ohwarumbloss said:
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
I hope that helped ?
Greetings
Thomas
Click to expand...
Click to collapse
But i won't find a flashable zip of latest I9295XXUBML3 stock firmware in here? or can i make it myself (with Aroma)?

@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM10.2 somehow as Secondary ROM?
3. Flash your already patched CM10.2 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??

ZeroZorro said:
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM11 somehow as Secondary ROM?
3. Flash your already patched CM11 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??
Click to expand...
Click to collapse
Let's say you've set up a Sammy Rom completely including root and cwm recovery. The normal way as usual.
If you downloaded the already patched Files, place them somewhere you can find em.
Now, install and start the "Dualboot Switcher" app and set first Rom as primary.
Boot into Recovery.
Install the patched Files the normal way.
Reboot, phone will boot into second Rom now by default.
Once, second Rom has booted, install and run the "Dualboot Switcher" app again. Inside the App you can now choose which Rom to boot, then push reboot Button inside the App.
Done
I hope that helped but feel free to ask!
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere

ZeroZorro said:
Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere
Click to expand...
Click to collapse
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:

ZeroZorro said:
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:
Click to expand...
Click to collapse
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
LOL i think that won't work cause i put it on my Ext-SD so i first have to install the right CWM to access my Nandroid
But i will be fine, serious
I am just waiting for my apps to re-install...so i wondered...when i have 2 roms/dualboot, will the Samsung Update show me an update in the stock rom? So, like kitkat is coming next month? #ProbablyNot

Well... Back to single boot CM10.2 for now...
Didn't work out for me but I'll be back for a 2nd attempt soon.
Meanwhile: SammyStock won't update in dual boot setup (obvious)
Had to disable Knox along the way to be able to install some apps that required root privileges.
Sent from my GT-I9295 using Tapatalk 2

Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data

ZeroZorro said:
Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Click to expand...
Click to collapse
Yes, you are very close
I´d do it this way :
After a fresh install of your Sammy Stock Rom, let it set up. Then, turn of Device and restart into Download Mode
1. Root with Odin Flash this recovery with Odin
2. CWM-recovery with Odin After flash, Device will reboot, press Vol Up + Home, it will go into recovery
2a. Flash this from Recovery
2b. Reboot Device and Click on the SU App. Let it do it´s job (it will install stuff and disable KNOX)
3. Enable Developer-mode not needed
4. Disable Knox is done by SU App
5. Enable USB-debugging not needed
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?) not there in stock and not needed
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
10a. Apps like Google+, Maps, Samsung Bloat are good candidates for this as they are downloadable from store later or not needed at all
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Yes, there should be no Problems with TB even tho you´ll get warnings about SU. It works.
Good luck

Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9295.zip

ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Click to expand...
Click to collapse
Of course not, sorry, give me one Minute lol
Edit: This is step 2a http://www.mediafire.com/?b0yud9r9pwq79aw
Sorry I was in a hurry!
Sent from my GT-I9295 using xda app-developers app

ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9509.zip
Click to expand...
Click to collapse
I've corrected the link above now, too
Sent from my GT-I9295 using xda app-developers app

Step 11 now...almost there...
Aargh... when trying to install the patched zip CM10.2 i get a Status 7 error
Went back and flashed CWM 6.0.4.5
But again...
------
NOT INSTALLING AS PRIMARY
symlink: some symlinks failed
E:Error in /data/media/0/Download/cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
(Status 7)
Installation aborted
-----
Any clue?
EDIT: Installing CMW 6.0.4.8 did the trick for me

[Q] Doubts about Recovery

Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.

samnettt said:
Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
Click to expand...
Click to collapse
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.

installing custome rom
Gw|n said:
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
Click to expand...
Click to collapse
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks

samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now

samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.

Gw|n said:
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Click to expand...
Click to collapse
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.

Aronuser said:
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
Click to expand...
Click to collapse
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you

samnettt said:
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Click to expand...
Click to collapse
That's NANDROID backup

samnettt said:
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
Click to expand...
Click to collapse
Here I uploaded it for you
https://www.dropbox.com/s/9082qxym9ysukxc/cm11.0_golden.maclaw.20140323.zip

[Q] CM11 + CWM on GT-N7000

Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings

I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot

I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.

First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.

User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment

Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....

User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?

hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps

eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?

hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING

tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!

hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING

tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support

hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!

eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING

tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000

hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.

eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then

hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!

hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING

[ROM][Lollipop 5.0.1]Pure Stock LRX22C

...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror

This flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like TWRP/CWM) prevents me from using a PC,
If these zip flashes also the recovery back to stock, then we cant go back/revert back from Nandroid without a PC..
Just a simple question, but I put mu reasons why.. Heheh.
Thanks by the way for sharing the ROM..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________

yethz said:
this flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like twrp/cwm) prevents me from using a pc,
if these zip flashes also the recovery back to stock, then we cant go back/revert back from nandroid without a pc..
Just a simple question, but i put mu reasons why.. Heheh.
Thanks by the way for sharing the rom..
_________________________________________________
device: google nexus 4 (lg-e960) 16gb (mako)
rom: simpleaosp-l-rom (stable build 7)
kernel: stuxnet v4.5 (3.4.105)
gapps: pa-gapps-5.0.1-beta4 (mini)
________________________________________________
Click to expand...
Click to collapse
no, it does not

Can we get a different host? Its asking me to sign in through facebook/twitter/instagram etc if I want to download.
Thanks for the making it flashable though!

aidinvm_ultimate said:
no, it does not
Click to expand...
Click to collapse
I think it is necessary to remove recovery-from-boot.p from system

pincher65 said:
I think it is necessary to remove recovery-from-boot.p from system
Click to expand...
Click to collapse
this is safe to flash rom even without "recovery-from-boot" but all in all this Rom does not rewrite your current recovery

Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?

theo28 said:
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
Click to expand...
Click to collapse
Yes, as you said

aidinvm_ultimate said:
...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
Click to expand...
Click to collapse
Works exactly as mentioned and it took me about 9 minutes to reboot and maybe another 10 to do CF root. Good job!

Can I flash a custom kernel over this?

GorfDroid said:
Can I flash a custom kernel over this?
Click to expand...
Click to collapse
Yeap, you can treat It like any other rom, but for safty always do nandbackup of system before.

Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?

i'm getting battery usage data not available when i check the battery status in notifications

Many thanks
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.

swimma said:
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
Click to expand...
Click to collapse
No,there is no radio included, you have to flash it desperately
mynickname said:
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
Click to expand...
Click to collapse
you're welcome bro

ankuzero said:
i'm getting battery usage data not available when i check the battery status in notifications
Click to expand...
Click to collapse
plz do wipe cache (or even factory reset if you come from custom rom), every thing is Ok here

Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.

SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?

aidinvm_ultimate said:
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
Click to expand...
Click to collapse
I tried the other stock Lollipop floating around and had the same issue. Ended up having to pull the image directly from Google. It's good to go now.
No other mods were flashed.

SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
I had the same issue.
I updated to the latest TWRP, I then factory wiped. cleaned cache, and dalvik.
Then installed this stock rom from scratch with the instructions here and it fixed the issue.
Give it another go...
I am trying to remember the exact details. But this was almost 2 weeks ago, and I might be missing a step?
Hope not...

Format and Fresh Install GTi9070

Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf

wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070

Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.

DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.

kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?

DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.

kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone

DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.