Alright guys, so this is a strange issue. My Nexus 6 tends to freeze and reboot right after turning the device on if I shut off the screen right away, it doesn't freeze if I leave the screen on long enough for SuperSU to give my usual apps the permissions. It's kind of strange because it seems to not do this with a fresh factory image installed, but over time it slowly starts doing this, leading me to think it may be an app I have. I had another member tell me it was the bootloader being glitchy and it could be fixed with the next software release. Anyone else have this happen to them on their devices? I'll get a logcat if it's needed, just let me know! Thanks all and happy flashing! :angel:
H4X0R46 said:
Alright guys, so this is a strange issue. My Nexus 6 tends to freeze and reboot right after turning the device on if I shut off the screen right away, it doesn't freeze if I leave the screen on long enough for SuperSU to give my usual apps the permissions. It's kind of strange because it seems to not do this with a fresh factory image installed, but over time it slowly starts doing this, leading me to think it may be an app I have. I had another member tell me it was the bootloader being glitchy and it could be fixed with the next software release. Anyone else have this happen to them on their devices? I'll get a logcat if it's needed, just let me know! Thanks all and happy flashing! :angel:
Click to expand...
Click to collapse
What custom rom are you running? Custom kernel? Did you add xposed framework? Did you make any under the hood manual changes to it like build.prop? What radio and kernel are you currently running? Could you provide me a logcat?
biggiesmalls657 said:
What custom rom are you running? Custom kernel? Did you add xposed framework? Did you make any under the hood manual changes to it like build.prop? What radio and kernel are you currently running? Could you provide me a logcat?
Click to expand...
Click to collapse
It's stock Android, Elite kernel (Elemental X also seems to do this), xposed IS installed, and I just removed docs, sheets, and slides from the system with a root explorer. I'll get ya a logcat and see if I can get the device to do it again.
H4X0R46 said:
It's stock Android, Elite kernel (Elemental X also seems to do this), xposed IS installed, and I just removed docs, sheets, and slides from the system with a root explorer. I'll get ya a logcat and see if I can get the device to do it again.
Click to expand...
Click to collapse
I am pretty sure its not the kernel level, it booted into android. Try fresh install of android and if it still does it then provide me a logcat.
biggiesmalls657 said:
I am pretty sure its not the kernel level, it booted into android. Try fresh install of android and if it still does it then provide me a logcat.
Click to expand...
Click to collapse
Is there a way to get a logcat on boot without unlocking the device and changing the usb mode to PTP? The device seems to do this if I let the screen go off after first boot without unlocking it, and after about a minute or two. Or is PTP the only way to get it to log with adb?
H4X0R46 said:
Is there a way to get a logcat on boot without unlocking the device and changing the usb mode to PTP? The device seems to do this if I let the screen go off after first boot without unlocking it, and after about a minute or two. Or is PTP the only way to get it to log with adb?
Click to expand...
Click to collapse
Just download a decent rated logcat from the play store. Just download Catlog and you need root or aLogcat
biggiesmalls657 said:
Just download a decent rated logcat from the play store. Just download Catlog and you need root or aLogcat
Click to expand...
Click to collapse
I have catlog installed actually, does it get wiped if the device freezes?
H4X0R46 said:
I have catlog installed actually, does it get wiped if the device freezes?
Click to expand...
Click to collapse
No there should be a way to set it. I would just run it for like 5 minutes and i can see what its doing. Like I said before worse case scenario you would fastboot back to stock and wipe data/cache to see if flashing stock doesnt fix it but the easy/quick way first especially with your apps on there
---------- Post added at 02:03 AM ---------- Previous post was at 02:00 AM ----------
I just flashed full stock today with a full wipe to reinstall a rom and kernel so i know its a clean install. This way when i setup my phone I will back up a clean ROM not a rom that has had a few miles on her. lmao
H4X0R46 said:
I have catlog installed actually, does it get wiped if the device freezes?
Click to expand...
Click to collapse
Did you get a logcat?
raise your voltage for your highest cpu speed by 10mV
biggiesmalls657 said:
Did you get a logcat?
Click to expand...
Click to collapse
I have not been able to recreate the issue for some reason. It chooses to do it a lot sometimes and other times not at all. Go figure, when I make a thread I can't recreate it :/ I'll keep trying though! Hopefully I can.
simms22 said:
raise your voltage for your highest cpu speed by 10mV
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which do I change and to what? This is ex kernel manager, I'm using elite kernel. I never messed with the voltage because I have no idea what any of this is to be honest [emoji14] thanks Simms!
H4X0R46 said:
Which do I change and to what? This is ex kernel manager, I'm using elite kernel. I never messed with the voltage because I have no idea what any of this is to be honest [emoji14] thanks Simms!
Click to expand...
Click to collapse
raise your top cpu speed(probably 2649mhz) by 10mV up, to 1130mV.
---------- Post added at 05:10 PM ---------- Previous post was at 05:05 PM ----------
H4X0R46 said:
Which do I change and to what? This is ex kernel manager, I'm using elite kernel. I never messed with the voltage because I have no idea what any of this is to be honest [emoji14] thanks Simms!
Click to expand...
Click to collapse
many people randomly lower their voltages, to "save" battery. but, this doesn't save battery. most are just believing what pwople who think wrong tell them. but.. raising your voltage a little can bring mire stability. which is what i do when i oc to 3033mhz, i raise my voltage by 25mV.
Related
Ok, I am having all sorts of trouble. It doesn't seem to matter what I do, I cannot get beyond a stable installation of Cyanogen Mod 4.0.2 on my T-Mobile G1. I am going to post all the specifics of my current setup:
ROM: Cyanogen Mod 4.0.2
SPL: DangerSPL
Radio: 2.22.19.26I
Firmware Version: 1.5
Now, I was under the impression, that if I wanted to go to Cyanogen Mod 4.2.15.1, I would simply need to wipe, and then reinstall the ROM right over this one, and I may need to fix_permissions to resolve any force close issues.
But no matter how many times I try, it seems to indefinitely hang at the first splash screen (T-Mobile) and will not boot, so I end up having to wipe and reflash 4.0.2 to get it functional again.
What am I doing wrong, and what would be the end-all, ideal way to flash up from 4.02 to 4.2.15.1?
Also, once I do this, in the future, I hope to flash to the 5.07 once we get the stable ok from Cyanogen, what would be the ideal steps then?
PS I've done a LOT of searching on these forums, AND others forums via Google, and when it comes specifically down to my exact, current situation, things get vague and nebulous. I would appreciate loads, if someone could weigh in and straighten me out.
Ninjineer said:
Now, I was under the impression, that if I wanted to go to Cyanogen Mod 4.2.15.1, I would simply need to wipe, and then reinstall the ROM right over this one, and I may need to fix_permissions to resolve any force close issues.
Click to expand...
Click to collapse
No. You need to flash the base-defanged... one sec for link...
http://dx.infernix.net/DRC83_base_defanged.zip
Flash that, then the CM update. He went legal after that 4.0.4 C&D.
Edit: Looked as his thread on his forums, and no link to it in it.
However, it's in the wiki....
http://wiki.cyanogenmod.com/index.p...G/Magic_Firmware_to_CyanogenMod#File_Download
Oh, that's right! I completely forgot about that. So, wipe, flash Defanged, then flash 4.2.15.1 right over it. Thanks a million.
Ninjineer said:
Oh, that's right! I completely forgot about that. So, wipe, flash Defanged, then flash 4.2.15.1 right over it. Thanks a million.
Click to expand...
Click to collapse
I am currently at the same point as you, what level of wiping is recommended?
gper78 said:
what level of wiping is recommended?
Click to expand...
Click to collapse
code red wiping.
supremeteam256 said:
code red wiping.
Click to expand...
Click to collapse
I did a search on "code red wiping", can't find anything. Could you explain this. Thanks for your help. (Using RA-dream v1.5.2)
He's a troll, don't listen to a word he is. 4.02 was from before the CnD letter Cyan received to remove Google apps from his package. You need to flash the Defanged base, and immediately flash 4.2.15.1 over it.
If you are having trouble with force closes, then run fix_permissions in the recovery console.
Ninjineer said:
He's a troll, don't listen to a word he is. 4.02 was from before the CnD letter Cyan received to remove Google apps from his package. You need to flash the Defanged base, and immediately flash 4.2.15.1 over it.
If you are having trouble with force closes, then run fix_permissions in the recovery console.
Click to expand...
Click to collapse
No. This is a troll
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I may be a troll, but a troll with alot of experience and knowledge.
supremeteam256 said:
No. This is a troll
I may be a troll, but a troll with alot of experience and knowledge.
Click to expand...
Click to collapse
Dang..tht looks like my baby mama
jacsonmoore3 said:
Dang..tht looks like my baby mama
Click to expand...
Click to collapse
Kinda like my ex wife too. lol
supremeteam256 said:
I may be a troll, but a troll with alot of experience and knowledge.
Click to expand...
Click to collapse
Your experience and knowledge amount to nothing, if you aren't intent on sharing them. This is Q&A, you've answered nothing, so GTFO?
Ninjineer said:
Your experience and knowledge amount to nothing, if you aren't intent on sharing them. This is Q&A, you've answered nothing, so GTFO?
Click to expand...
Click to collapse
Agreed, as I still don't have an explanation as. to what "code red wipe" is. Is that a full wipe, wipe data, or wipe dalvik? Please, can somebody explain!
gper78 said:
Agreed, as I still don't have an explanation as. to what "code red wipe" is. Is that a full wipe, wipe data, or wipe dalvik? Please, can somebody explain!
Click to expand...
Click to collapse
lol dude he was giving you a smartass response. Just wipe (alt-W I believe) in Recovery and you should be good. If you get forceclose errors, run fix_permissions.
It wouldn't hurt to wipe all of the categories. Can't hurt unless you have data to lose. If you have data to lose, then it gets a little more advanced than I have the patience to address today. :/
Ninjineer said:
It wouldn't hurt to wipe all of the categories. Can't hurt unless you have data to lose. If you have data to lose, then it gets a little more advanced than I have the patience to address today. :/
Click to expand...
Click to collapse
He does not need to wipe battery stats or rotate settings. Those two options are for a completely different cause.
Edit: If you have data to loose, back it up. Use Titanium Backup for all applications + app data. If you can't get titanium backup - don't bother ever rooting again.
r3s-rt said:
He does not need to wipe battery stats or rotate settings. Those two options are for a completely different cause.
Edit: If you have data to loose, back it up. Use Titanium Backup for all applications + app data. If you can't get titanium backup - don't bother ever rooting again.
Click to expand...
Click to collapse
No he doesn't, but it can't hurt anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenies
Changelog
Revised Edition
NO Reboots now, not even one!
SIM bug fixed!!!
Themes apply great ( you need to reboot once manually after applying a theme)
Battery Drain Fixed!
Added UMS app
Made it faster and more stable
Updated sources
V1
Initial build
Based on Rohan007's Cm10
3 way reboot
Themes fixed
SU fixed
Bugs
Graphical glitches in Gallery
Native UMS not working(use 3rd party app)
V3
http://www.mediafire.com/?ca22af6wdncv5fe/
Click to expand...
Click to collapse
V2
http://www.techgeekal.com/2013/01/16/downloads/
Click to expand...
Click to collapse
V 1
http://www.techgeekal.com/2013/01/16/downloads/
Click to expand...
Click to collapse
Credits
Rohan007 for CM10
ayushrox for helping always!
reserved ...again!
Good, this deserves a thanks.
Great, now let's wait for miui jb with working extended settings/control panel/miui toolbox
yackovsky said:
Great, now let's wait for miui jb with working extended settings/control panel/miui toolbox
Click to expand...
Click to collapse
ok, i know what is miui toolbox and what is for...but how about control panel? is that for status bar???
Nixoman said:
ok, i know what is miui toolbox and what is for...but how about control panel? is that for status bar???
Click to expand...
Click to collapse
MIUI Toolbox / Control Panel is just like CM Settings.
F4uzan said:
MIUI Toolbox / Control Panel is just like CM Settings.
Click to expand...
Click to collapse
and extended settings are for status bar??? cause i need from miui its theme and cpu manager, nothing else...i asking before downloading
Problem: After booting I have about 10 seconds, then reboot. Tried to reflash/wipe.
ast00 said:
Problem: After booting I have about 10 seconds, then reboot. Tried to reflash/wipe.
Click to expand...
Click to collapse
yeah that happened with me once too..just allow it to reboot itself once..after that its going to be great
adityalahiri13 said:
yeah that happened with me once too..just allow it to reboot itself once..after that its going to be great
Click to expand...
Click to collapse
It isn't I let it rebooting for 15 minutes and still the same.
ast00 said:
It isn't I let it rebooting for 15 minutes and still the same.
Click to expand...
Click to collapse
try a fresh install...i know its a bit tough in starting but after that its real smooth and beautiful
guys we are tring to fix screen glitches ASAP
for get ums u can use this 3rd party app : http://www.mediafire.com/?ykt6lz4pjq61iid
its basically a widget so whenever ya want to use ums just tap on the widget.
adityalahiri13 said:
try a fresh install...i know its a bit tough in starting but after that its real smooth and beautiful
Click to expand...
Click to collapse
Pfffffffffffffffffff... Got it working... Method: Pull battery out, put it back, connect USB, start ADB boot logcat, wait.
It only works if I logcat the boot??? Lol I know it's just a random fail, now it's booting any time I try, but that's slightly mad.
EDIT: Fail... Not working again. Starting logcat
I have a bootloop logcat (so now I'm stuck again), but it's 612Kb. Can't upload it to pastebin or xda as attachment
Can someone tell me where can I put it?
ast00 said:
Pfffffffffffffffffff... Got it working... Method: Pull battery out, put it back, connect USB, start ADB boot logcat, wait.
It only works if I logcat the boot??? Lol I know it's just a random fail, now it's booting any time I try, but that's slightly mad.
EDIT: Fail... Not working again. Starting logcat
I have a bootloop logcat (so now I'm stuck again), but it's 612Kb. Can't upload it to pastebin or xda as attachment
Can someone tell me where can I put it?
Click to expand...
Click to collapse
i dont know whats going wrong with you..boots up easily for me..ry re-downloading the build and do a real fresh and clean install
anyone else tested?
ast00 said:
Pfffffffffffffffffff... Got it working... Method: Pull battery out, put it back, connect USB, start ADB boot logcat, wait.
It only works if I logcat the boot??? Lol I know it's just a random fail, now it's booting any time I try, but that's slightly mad.
EDIT: Fail... Not working again. Starting logcat
I have a bootloop logcat (so now I'm stuck again), but it's 612Kb. Can't upload it to pastebin or xda as attachment
Can someone tell me where can I put it?
Click to expand...
Click to collapse
Check the md5 sums after downloading again of it doesn't work tell us
Thaks 4 testing .....anyway
but i tried it works 4 me
ayushrox said:
Check the md5 sums after downloading again of it doesn't work tell us
Thaks 4 testing .....anyway
but i tried it works 4 me
Click to expand...
Click to collapse
What should be the MD5? I post mine in 10 mins.
when I select language and click start it says wait a sec and phone turns off......... no service in network also
---------- Post added at 12:43 AM ---------- Previous post was at 12:23 AM ----------
Facing Bootloop while setting up google account tried almost 10 times
rupesh1718 said:
when I select language and click start it says wait a sec and phone turns off......... no service in network also
---------- Post added at 12:43 AM ---------- Previous post was at 12:23 AM ----------
Facing Bootloop while setting up google account tried almost 10 times
Click to expand...
Click to collapse
Then it's not just my problem...
Delete please
This looks really slick. Thanks for the hard work I want a Razr because of this rom
Sent from Motorola Droid X2
Awesome rom. So far, bluetooth streaming and phone appear to be working. Any way to get the nav bar back? I am not a fan of PIE and would love to see if I can get the bar back.
Thanks for you hard work.
sunkim50 said:
Awesome rom. So far, bluetooth streaming and phone appear to be working. Any way to get the nav bar back? I am not a fan of PIE and would love to see if I can get the bar back.
Thanks for you hard work.
Click to expand...
Click to collapse
Yep, go Into developer options and make sure root access is set to apps and adb. Reboot. Go into hybrid properties and set to tablet mode. Then set back to phone and boom! There they are.
timpohladthomas said:
Yep, go Into developer options and make sure root access is set to apps and adb. Reboot. Go into hybrid properties and set to tablet mode. Then set back to phone and boom! There they are.
Click to expand...
Click to collapse
Awesome! worked as described. I will be running this for bit and will report any bugs. Thanks for prompt response.
edit: I've been running this heavily with bluetooth streaming and appears to be rock-solid. Only issues so far are some random force closes but a reboot seems to have cleared up most of the issues.
edit 2: I've had 1 soft reboot so far. I was streaming bluetooth, then made a call, then when call ended the phone soft rebooted. The phone loaded fine and was not stuck on logo.
edit 3: Small bug found. When root access is granted to a program, it takes me back to the setup section and NOT the last program that requested the root privilege. Also calendar and Google search have force closes. Ended up uninstalling calendar and reinstalling from backup. For Google search, just restored a backup which fixed the issue.
Do I need to install GAPPS at all?
Shamrock13 said:
Do I need to install GAPPS at all?
Click to expand...
Click to collapse
No sir.
timpohladthomas said:
No sir.
Click to expand...
Click to collapse
All right. Awesome. I'm going to install this now.
Are there any bugs I should know about? I want to run an AOSP/AOKP/CM-based ROM while on vacation this upcoming week. I don't want to deal with the stock ROM since it's so freaking slow and laggy.
One more question! Have you tested the battery life? If so, is it good, bad, the same?
Shamrock13 said:
All right. Awesome. I'm going to install this now.
Are there any bugs I should know about? I want to run an AOSP/AOKP/CM-based ROM while on vacation this upcoming week. I don't want to deal with the stock ROM since it's so freaking slow and laggy.
One more question! Have you tested the battery life? If so, is it good, bad, the same?
Click to expand...
Click to collapse
There are not bugs that I have noticed and I have been running it for a couple of days... The battery is on par with all of the others... If you want even better battery search for code kernel on droidrzr. It is built for performance and battery life.
Never mind. I'm dumb. I figured it out.
Looks like a very nice ROM. Anyone know if dock line-level audio out (analog, over the USB port) works on this build?
Huh, just saw this thread.
Nice to see ProBAM, built for other devices.
If you needed anything regarding the ROM, feel free to PM me or codexc.
Keep up the good work. :good:
Does Global function work?
I'm interested in flashing the ROM. I'm currently here in Taiwan on business and using GSM feature to run a local SIM card while I'm here. I am currently running Eclipse ROM 1.4 and it's pretty stable and the Global feature works. I don't want to flash if the feature is not available. If it is and no one tested, then I might give it a shot while I'm here. Thanks for porting another ROM :good:
I'm using the XT926 on verizon
rudyo78427 said:
I'm interested in flashing the ROM. I'm currently here in Taiwan on business and using GSM feature to run a local SIM card while I'm here. I am currently running Eclipse ROM 1.4 and it's pretty stable and the Global feature works. I don't want to flash if the feature is not available. If it is and no one tested, then I might give it a shot while I'm here. Thanks for porting another ROM :good:
I'm using the XT926 on verizon
Click to expand...
Click to collapse
Does this help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
timpohladthomas said:
Does this help?
View attachment 2182809
Click to expand...
Click to collapse
Yes...that is helpful. I will download this today and flash it. Give it a test run while i'm here abroad. Will post my findings
rudyo78427 said:
Yes...that is helpful. I will download this today and flash it. Give it a test run while i'm here abroad. Will post my findings
Click to expand...
Click to collapse
Ok...so just flashed the ROM. The global function is working as the local sim card I'm using is recognized. I have a slight problem as I don't have any of the app menu icon on the screen. My rom loaded with a complete blank home screen, no widgits except for google bar. I can't seem to locate the feature to unhide the icons. Can you help with that? I currently can't add any widgets or even go to the app menu to long press them and add to my home screen. I've messed with the customization menu's but can't seem to find the setting. Also, I installed the Aug 11 build from the repository. I noticed there are 3 of them. I would assume the latest build was the one to load?
rudyo78427 said:
Ok...so just flashed the ROM. The global function is working as the local sim card I'm using is recognized. I have a slight problem as I don't have any of the app menu icon on the screen. My rom loaded with a complete blank home screen, no widgits except for google bar. I can't seem to locate the feature to unhide the icons. Can you help with that? I currently can't add any widgets or even go to the app menu to long press them and add to my home screen. I've messed with the customization menu's but can't seem to find the setting. Also, I installed the Aug 11 build from the repository. I noticed there are 3 of them. I would assume the latest build was the one to load?
Click to expand...
Click to collapse
Sounds like possibly a bad flash.
timpohladthomas said:
Sounds like possibly a bad flash.
Click to expand...
Click to collapse
You are correct. I did a factory reset and everything came back up. Although it was glitchy with regards to app performance. I am using TWRP and only did the factory reset w/ advanced wipe. I found that doing a whole system format of the internal storage corrected the issues. Thanks.:victory:
Download-Link is broken
Does that mean it has been pulled from working with our phones?
Q&A for [ROM][5.0.2][UNIFIED]The Titan Prime ROM
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][UNIFIED]The Titan Prime ROM. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Reserved
Nice! 1st question: Have you changed the dpi from stock or old TitanPrime builds?
OTA updates
does the OTA update work FINE in thi version (1.0.1 beta)? OTA updates need wipe data? tnk
fabh2o said:
does the OTA update work FINE in thi version (1.0.1 beta)? OTA updates need wipe data? tnk
Click to expand...
Click to collapse
No it does not. Shawn said it will be fixed in another update.
Shawn5162 said:
I've mentioned it (Bug Report Section) a million times...But no one seams to get it
Click to expand...
Click to collapse
@Shawn5162 I've actually been meaning to say something about that, everytime I try going into the bug report section or the feature request section the page times out. Every time. I know that is not your problem per se, I suppose I was also wondering whether that was also happening to anyone else?
Has anyone else got a continuous white line across the bottom of their screen? Since I started using Titan Rom (xt1068 1.1.1) I have had this problem. I don't think I had it while on stock. It didn't bother me at first, hence why I never said anything, but its kinda irritating me now. I've attached an image of it (click to enlarge).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Duck86 said:
Has anyone else got a continuous white line across the bottom of their screen? Since I started using Titan Rom (xt1068 1.1.1) I have had this problem. I don't think I had it while on stock. It didn't bother me at first, hence why I never said anything, but its kinda irritating me now. I've attached an image of it (click to enlarge).
View attachment 3204307
Click to expand...
Click to collapse
On Nova, I've never seen it on my XT1064. Have you tried another launcher?
laureano97 said:
Nice! 1st question: Have you changed the dpi from stock or old TitanPrime builds?
Click to expand...
Click to collapse
I just tried making mine 320 (It's set to 300 by default it seems) and it actually looks more along the lines of what I remember stock KitKat was (Battery icon is now the same size). My eye sight is starting to waver so larger text and icons are better for me
Great job
CM Theme Chooser in TITAN PRIME UNIFIED???
Is anyone else having Google Play Services problems on the latest update? (1.0.2)
@Jackie CDP Reflash Gapps to fix
sengook said:
@Jackie CDP Reflash Gapps to fix
Click to expand...
Click to collapse
Thank you very much, this solved everything!
Jackie CDP said:
Thank you very much, this solved everything!
Click to expand...
Click to collapse
HI @Shawn5162, Can I flash the latest version of Unified over TP v1.2.1? Just asking for help.
Arny209 said:
HI @Shawn5162, Can I flash the latest version of Unified over TP v1.2.1? Just asking for help.
Click to expand...
Click to collapse
No. It is recommend to clean flash this one as a lot has changed over TP v1.2.1.
I'm having an issue with apps not being able to write to SD.
for example Swiftkey can't save language packs and Snapseed can't save photos after I have edited them. Any ideas? Couldn't find much in the main thread, one person seemed to have a similar issue but I didn't see any responses.
Buttons
ey there!
I really want to install a llolipop rom, but i think i am really going to miss the volume rocker wake and the double tap in statusbar to sleep.
Is this implemented in the titanprime? Is there any doubletap to wake implementation o progress update?
Thank you in advance
blackdaveth said:
I'm having an issue with apps not being able to write to SD.
for example Swiftkey can't save language packs and Snapseed can't save photos after I have edited them. Any ideas? Couldn't find much in the main thread, one person seemed to have a similar issue but I didn't see any responses.
Click to expand...
Click to collapse
There may be other ways but one way is to download TWRP Manager from Play if you're using TWRP Recovery. Open it and it will tell you it has problems with SD card permissions, tell it to fix it and reboot. If It does nothing then go to settings, scroll down to SD card patch and do it there. It will reboot automatically.
Tel864 said:
There may be other ways but one way is to download TWRP Manager from Play if you're using TWRP Recovery. Open it and it will tell you it has problems with SD card permissions, tell it to fix it and reboot. If It does nothing then go to settings, scroll down to SD card patch and do it there. It will reboot automatically.
Click to expand...
Click to collapse
it didn't tell me it needed to and Apply SD Card patch was greyed out, so I chose Undo and nothing had changed after the reboot.
then I applied the patch and still nothing had changed after the reboot.
Internal storage is listed as /storage/emulated/0 is that right?
blackdaveth said:
it didn't tell me it needed to and Apply SD Card patch was greyed out, so I chose Undo and nothing had changed after the reboot.
then I applied the patch and still nothing had changed after the reboot.
Internal storage is listed as /storage/emulated/0 is that right?
Click to expand...
Click to collapse
Yes and I'm curious, if you look at the permissions for your card, are they readable and writable?
This mod enables the Mobile Hotspot feature on your Xperia Z3V without checking for tether entitlement. (In other words, you can use the mobile hotspot feature even if you are not paying for it on your Verizon account.)
Prerequisites:
1. You must have a rooted Xperia Z3V on build 23.0.E.1.44.
2. You must have the XZ Dual Recovery installed. http://nut.xperia-files.com/
3. Reboot into either TWRP or PHILZ and flash the attached file. View attachment TetherNativeTWRP.zip
4. Reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Under settings--> About Phone--> Build Number it will show "XperiaPop 1.0" That's because this mod is from my XperiaPop Rom. This shouldn't affect anything.
If I helped you in any way, don't forget to THANK ME!
Chance for lollipop update?
Also, this module was working for me on stock and updated 4.4 http://forum.xda-developers.com/moto-x/themes-apps/xposed-moto-x-4-4-native-tether-apk-t2601859
Testing now on lollipop as well without issue
Sorry, not to step on your thread by any means. Thanks so much for your time and development on the z3v
darker_slayer said:
Also, this module was working for me on stock and updated 4.4 http://forum.xda-developers.com/moto-x/themes-apps/xposed-moto-x-4-4-native-tether-apk-t2601859
Testing now on lollipop as well without issue
Sorry, not to step on your thread by any means. Thanks so much for your time and development on the z3v
Click to expand...
Click to collapse
I updated to lollipop a few weeks ago. Just today I booted into recovery to flash this file and I am now in a boot loop. Probably gonna have to factory reset now. Do not recommend flashing.
The file in the op or the xposed module I quoted?
darker_slayer said:
The file in the op or the xposed module I quoted?
Click to expand...
Click to collapse
The file in the OP. Took me hours to get my phone back... Guess I will have to revert to older firmware now, root, and then update to be lollipop rooted again. Dangit.
Go ahead and try the xposed module I linked next time around. Works for me, from the built in hotspot app as well as the power toggles homescreen widget by painless apps (which is what I regularly use)
please help... need mod for lollipop also.....
Just install xposed installer apk and download xtheter in the app........ Problem solved! Hit thanks
Does installing exposed cause any issues with 5.02 firmware?
Aphex33 said:
Does installing exposed cause any issues with 5.02 firmware?
Click to expand...
Click to collapse
No
GigaSPX said:
No
Click to expand...
Click to collapse
Hi, thanks for the confirmation. Can you send me a link to the compatible Xposed thread? Thx in advance.
Aphex33 said:
Hi, thanks for the confirmation. Can you send me a link to the compatible Xposed thread? Thx in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
Next time, just Google it yourself. As far as which file it is, it's one of them that's just "--arm" and no numbers following it. I don't remember.
Aphex33 said:
Does installing exposed cause any issues with 5.02 firmware?
Click to expand...
Click to collapse
no issues dude... working fine.
p.shashikiran94 said:
no issues dude... working fine.
Click to expand...
Click to collapse
Awesome, thanks. Gonna back up and flash!
did you solve the problem?? I did the same as you did and I even did Factory Reset and still unable to get out of the loop! did I break my Z3v???
---------- Post added at 09:33 PM ---------- Previous post was at 09:25 PM ----------
Jdelta9889 said:
I updated to lollipop a few weeks ago. Just today I booted into recovery to flash this file and I am now in a boot loop. Probably gonna have to factory reset now. Do not recommend flashing.
Click to expand...
Click to collapse
I going through the same problem. I even trying to Factory Reset and it's not working. Did you ever get out of the infinite loop??
salouri said:
did you solve the problem?? I did the same as you did and I even did Factory Reset and still unable to get out of the loop! did I break my Z3v???
---------- Post added at 09:33 PM ---------- Previous post was at 09:25 PM ----------
I going through the same problem. I even trying to Factory Reset and it's not working. Did you ever get out of the infinite loop??
Click to expand...
Click to collapse
I have a different phone now, but I believe I had to reset the phone while pressing the buttons to get it into download mode.. not to be confused with recovery mode. When you are in download mode use the flash tool to flash original firmware. Let me know if you need more help.
Worked it out
Jdelta9889 said:
I have a different phone now, but I believe I had to reset the phone while pressing the buttons to get it into download mode.. not to be confused with recovery mode. When you are in download mode use the flash tool to flash original firmware. Let me know if you need more help.
Click to expand...
Click to collapse
Luckily I had the stock firmware on my SD card so I flashed it. (after switching to recovery from the boot loop). I found another post about hacking the Hotspot and that one worked just fine for me.
Thanks.
can you provide the link?