I replaced my Moto X Pure screen with one from a 3rd party vendor to save some $ and now I'm regretting that decision. Took my time and made sure to get it all back together correctly and now upon pushing the power button, it won't turn on. The screen lights up and shows it's charging with the % when it's plugged in to the wall, but that's all it's giving me. Took it apart and checked the screen's ribbon cable - the connector clicks in positively. Could the screen be defective? Any other ideas?
bretbretterson said:
I replaced my Moto X Pure screen with one from a 3rd party vendor to save some $ and now I'm regretting that decision. Took my time and made sure to get it all back together correctly and now upon pushing the power button, it won't turn on. The screen lights up and shows it's charging with the % when it's plugged in to the wall, but that's all it's giving me. Took it apart and checked the screen's ribbon cable - the connector clicks in positively. Could the screen be defective? Any other ideas?
Click to expand...
Click to collapse
Did you ever figure this out? I'm having the same issue.
Anyone find an answer to this??? Have the same issue except my screen won't light up at all. It just vibrates like it's about to turn on when I hold the power button.
This forum is for Moto X 2013 only, check Moto X Style/Pure subforum for help
Related
Hey guys, my LCD broke, It was a AMOLED not SLCD, I bought this piece off ebay:
http://www.ebay.com/itm/260900702599?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I put everything back for the second time now, first of all the device doesn't come on, but when I plug the AC power it shows charging light.
I'm pretty sure my old screen is AMOLED..
I made sure all the connectors where tight on the board. any help?
It wont power on, did I break something?
I'm pretty screwed guys, been at it for like 5 hours I'm done for tonight
Here is what I've conluded. I detached the digitizer from the lcd I made a mistake and removed the factory "tape"
Is and in the process the little power button came off.
So what are my chances now?
Can the digitizer be taped back to the lcd? or Do I need to get a new digitizer which includes an LCD? so as to preserve the factory tape?
As far as the power button goes, I'm not talking about the plastic bit, I'm talking about the actual button underneath. It seemed to be holding on my a little thread anything. Is that "thread" a connector or the button functions fine without it? I put iit back and sealed the phone up, it seems to be pressing. But of course the phone wont still come on
Not even 1 person?
So I recently cracked the screen on my HTC One m7. I bought a replacement screen and front housing. The screen was so far beyond repair that I couldn't shut off the phone prior to starting the replacement. I tried waiting for the phone to die but after two days I became impatient and did it anyway (essentially the phone lost power when I disconnected the battery). After transferring all parts into the new housing and being what I though as diligent putting all parts and connections back in their place, tried to power the phone back on. all that happens is that the back and home buttons flash and then I hear what sounds like the audio for when the phone powers on. The screen stays black and then phone doesn't technically turn on. I know this because I have missed messages and the green led light would be flashing if it was. Therefore, at this point I'm not certain that the new screen works or if I've connected it right. I've tried the numerous boot tricks with the volume buttons, nadda. I have had the phone on a charger for a full day and the same problems. (Disclaimer: I don't have the original charger, but I have been using this one for a long time). I do see the red charging led if I wiggle the charger in the input, but also just recently I saw a green led when doing this, which when the phone was working was a sign that it was fully charged. If anyone has a solution to my problem that would be great. I'm also interested on what's wrong, why this is happening, what might have caused this behavior? What do the flashing home and back buttons mean?
Howdy,
I've had the same problem, but my phone was shutdown allready. When I replaced the front screen, the phone won't boot. I would like to know if its anyway to get the files from sdcard down?
Thanks for the support!
I bought this Lumia 1020 off eBay with a broken screen. When I got it the LCD didn't work so I ordered an all in one piece thinking that would fix everything. I put the screen in last night plugged it into the charger and the windows home button blinked until it buzzed but the screen never lit up. I can hold the camera button and the camera will make noise and the flash will go off but nothing else. I can push the screen buttons and they will vibrate but the screen wont light up. I plugged it into the computer and saw that I was charging and had 20% battery power and climbing. I tried to use the windows phone desktop app but it just told me the phone was locked. I took the phone back apart and realized the proximity sensor ribbon was separated from the front camera ribbon. Could the phone shut the screen down if it doesn't get a signal from the proximity sensor? Any and all help is appreciated and thank you in advance.
I bought this Lumia 1020 off eBay with a broken screen. When I got it the LCD didn't work so I ordered an all in one piece thinking that would fix everything. I put the screen in last night plugged it into the charger and the windows home button blinked until it buzzed but the screen never lit up. I can hold the camera button and the camera will make noise and the flash will go off but nothing else. I can push the screen buttons and they will vibrate but the screen wont light up. I plugged it into the computer and saw that I was charging and had 20% battery power and climbing. I tried to use the windows phone desktop app but it just told me the phone was locked. I took the phone back apart and realized the proximity sensor ribbon was separated from the front camera ribbon. Could the phone shut the screen down if it doesn't get a signal from the proximity sensor? Any and all help is appreciated and thank you in advance.
Hellboy22 said:
I bought this Lumia 1020 off eBay with a broken screen. When I got it the LCD didn't work so I ordered an all in one piece thinking that would fix everything. I put the screen in last night plugged it into the charger and the windows home button blinked until it buzzed but the screen never lit up. I can hold the camera button and the camera will make noise and the flash will go off but nothing else. I can push the screen buttons and they will vibrate but the screen wont light up. I plugged it into the computer and saw that I was charging and had 20% battery power and climbing. I tried to use the windows phone desktop app but it just told me the phone was locked. I took the phone back apart and realized the proximity sensor ribbon was separated from the front camera ribbon. Could the phone shut the screen down if it doesn't get a signal from the proximity sensor? Any and all help is appreciated and thank you in advance.
Click to expand...
Click to collapse
Can you press the hardware buttons (back/home/search) and it vibrates? I suppose the screen/touch panel is not correctly connected to the device somehow...
Hello,
So I got a replacement display for the Moto X 2014, touch and everything is working fine on it.
However, when I try to fit the display into the phone's panel / back housing, the display shuts off.
If I remove it from that panel and press the power button, display lights up again.
Video: https://www.youtube.com/watch?v=xX-1vN3geQo
As I said, the display stop working when it's fit into the screen. However, in such a case, if the phone it off and I try to power it on, I get the bootloader unlocked screen for 2 seconds and then display powers off again so I am guessing this is a software bug?
Video: https://www.youtube.com/watch?v=qqdA-bwjgWM
What is triggering the display to power off?
Requesting assistance.