Database Develop

How to install a modded kernel on a motoX2 with a broken screen ?

Hello,
I bought a used Motox 2014 with a broken screen on ebay and I was going to buy a new screen ...
My problem is that the screen will come to me in a month and in the meantime I want to use my phone, but I can not because I do not see anything...
Then I saw that there are programs like this: http://forum.xda-developers.com/showthread.php?t=2786395
I tried this program but to work requires USB DEBUGGING active and I've got them off.
The autor of program says: "for people who dont have adb enabled, i suggest you contact a kernel developer to automatically enable it in the default.prop and sideload the kernel in recovery!
i broke my S3 on stock so nothing was enabled.
i enabled adb via the default.prop and compiled the kernel and flashed in recovery(sideload).
now i have full control over the device"
Now ... where I find a modded kernel with usb debugging enabled, and how do I flash it in recovery if not see anything ?
Someone has a modded kernel ? I can flash it from adb shell fastboot or Motorola RDS lite ?
My version is lollipop 5.0 or 5.1 and doing a screenshot (with power and vol down) I can only see the screen but no touch screen or keyboard can not do anything, and then I would connect to the PC with the program for remote viewing..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me thanks. (sorry for bad english i'm italian)

any suggestion ?..

USB OTG + Mouse...

No, this is too easy but don't work form me...i need to view my phone from PC , and for to do this i need to install a custom kernel...how i can flash it ?

OPO stuck on recovery mode loop and PC won't recognise it in order for me to flash it

So recently I did a stupid and accidentally switched off my OPO during an update installation and completely screwed it all up. I tried switching it back on only to find that it was stuck in a recovery mode loop. I then hit factory reset in a last ditch attempt to save the poor bugger without flashing it and even that didn't work.
I've then had to resort to flashing it using the OPO toolkit software on my PC however when connecting to the PC, my OPO only shows up as an MTP USB Device and nothing else. I have tried installing recommended Samsung drivers for the phone but I wasn't able to as it the "update drivers" button was greyed out on the MTP USB Device properties window.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Basically, the OPO toolkit will not work as no android devices are recognised by the PC even though an android device is showing up in the control panel.
There is no way I can currently access the settings on my phone due to recovery mode loop obviously.
The last thing I want to do here is end up with being forced to use the OnePlus support which I hope most of you understand why.
Thanks for any suggestions!

Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!

Put it in downloading mode and then use adb to use the toolkit since bow u don't have a os on the OPO happened with me too but I fixed it this way
Sent from my A0001 using Tapatalk

Flash Without usb port? (BRICKED) s3 GT-I9300

I have an old Galaxy S3 GT-I9300 device
it got bricked and the charging port is broken .
the recovery will not open and will go back to splash screen
to charge the device i use a battery charger dock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how can i flash and unbrick it?
please help...

musicmate said:
As far as you described the circumstances, there is no Option to Unbrick it.
But Why?
Except from the Recovery Mode there is the Download Mode to Flash Software/Tools (e.g. Bootloader, Recovery, ROM):
-> One Option ist to access the I9300 via Download Mode and ADB/Odin, but without a working USB-Port... .
-> Another Option is to access via Wireless-ADB (Network-IP-based ADB), but to activate it, you'll have to get into the ROM's Settings (Developers-Options). Therefore you'll need an working ROM, which didn't seem so... .
-> Last possible Solution: Get in touch with Microelectronics and solder a new Micro USB Port to your Phone.
Otherwise you'll now have new opportunities to use your I9300 as:
Decorative Night Light/ Paperweight/ Doorstopper...
(Annotation: The Battery Charging Dock won't help, 'cause it's construed for standalone loading accumulators.)
Click to expand...
Click to collapse
mega oof

i hope put this to work today
AmberKat said:
mega oof
Click to expand...
Click to collapse
i hope put this to work today, and post here for you and others

board swap it

URGENT : Stuck in fastboot mode, volume buttons stuck inside

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]I dropped by Asus ROG Phone II and the volume buttons are stuck inside. The phone is now stuck at the fastboot mode and if I keep the power button held then it still reboots into fastboot mode and for some reason I cannot select the start option too ( and cannot toggle options either because the volume buttons are smashed in ).
I attempted using minimal adb and fastboot but to no avail. It rebooted right into fastboot mode. I used the following commands -
fastboot devices
fastboot reboot
I cannot dislodge the volume buttons and cannot open the phone. Repairing it is not an option due to the quarantine. Need a fix very urgently, all my business is on my phone. Any help will be heavily appreciated.

Omg... it happened something similar to me, but with the time, the volume button it's going better. I was unlocking it just hitting it with my phalanx/midjoint of some finger (3rd, normally), and it worked.
Let us know how are you going. Try the hit in different directions/strength vectors... it sounds a joke, but it's true xD

uriii13 said:
Omg... it happened something similar to me, but with the time, the volume button it's going better. I was unlocking it just hitting it with my phalanx/midjoint of some finger (3rd, normally), and it worked.
Let us know how are you going. Try the hit in different directions/strength vectors... it sounds a joke, but it's true xD
Click to expand...
Click to collapse
Tried that already, not working, mine's smashed in for good. Need a software fix.

Extracting data from a dead Pixel 5 with fastboot only??

Hi guys,
My pixel 5 died recently while playing a video. It will not turn on, nor make any sound. There is no haptic feedback as well when I start the device. The only time it is detected is when I boot it up in fastboot mode (Press and hold Power and Vol Down). It is detected as Pixel 5 on windows pc. It is detected under fastboot devices but I can't seem to do anything else with it. I am unable to get an adb connection. I don't remember if usb debugging was turned on or not on my device before it died, it most likely was enabled but can't get it connected via adb.
Note: The phone is bootloader locked
My question is can I recover my data from the phone through fastboot only without a working display?
Thanks.

Perhaps you could try booting into twrp and see if you can access the data that way?

Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nabeeltariq said:
Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
Click to expand...
Click to collapse
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.

swangjang said:
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.
Click to expand...
Click to collapse
This. Without bootloader unlock, your chances of dumping partitions are zero.
@nabeeltariq Are you able to access stock recovery? You may be able to sideload an OTA package to get working again.