I tried to change the phone to the original rom and in the middle of the process it failed and a screen with a message appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.". I saw some videos saying that you can enter the download mode and fix it with odin but I can't enter. Also I read that if you can't enter the download mode is because of the bootloader, I found a rom with the PIT, PDA, CSC, BOOTLOADER and PHONE files but the problem is that when I plug it to the pc it doesn't even recognize the phone, not even a message saying that windows couldn't recognize it and I have all the drivers installed or the typical sound that the pc makes when you plug something in the usb port. I don't know what to do.
Related
[Q] Phone Dead after kies restarted PC while updating then using Odin3 to "recover"
So my PC suddenly restarted while installing 2.2 on my phone. When I started up again it could not use its "emergency recovery". I searched for help and found a place where they had the exact same problem fixed it via "Odin3 Flasher" (google "Stock Firmware Odin3 Flasher" to get the exact guide I followed)
My phone is from Norway so I do NOT have at&t but now that i followed those instructions, all my phone does is flash on and off "at&t world phone", and I cannot get into download mode again. When I plug in the USB the at&t logo stops flashing and it goes completly black.
How can I get into download mode or fix this?
same thing happen with me today
the same thing is happened with me today when i used the ODIN3 v1.00.... Please help me...
you will need to make or purchase a usb jig : http://www.1giftbuy.com/p-10279-i9000-i9100-micro-usb-download-mode-jig-/?currency=GBP , then you will be able to use odin to flash a stock rom
Search on the forum, you can install android SDK, set usb debugging and then do an adb reboot quickly from computer after attaching the uab cable. I had the same brick problem, and I fixed it without usb jig.
Sent from my GT-I9000 using XDA App
Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck
Hi all,
I read somewhere that you can enter PDA mode in order to connect your device to your PC via USB
in case you have problems with kies or Samsung drivers.
They say that all you have to do is dial this *#7284# and then go to
USB -> Modem and then USB -> PDA mode
Well, the thing is that I get an error that says something like "connection error or invalid MMI code"
Can someone drop me a hand?. I want to connect my device to my PC. Please help! :crying:
Hello,
I am having trouble retrieving my bricked phone, it is a Samsumg Galaxy Ace GT-S5830.
I had placed a cyanogen rom, just not followed the steps properly and even managed to install, but some features such as camera and file manager were not working.
So I decided to try to return to the original rom, installed ROM Manager and tried to install Clockworkmod Recovery for him, but when I went for a recovery reboot the phone would not connect more, is restarting the screen samsumg.
There are many tutorials on the internet about how unbrick? this phone model, but all use Odin, just that I'm having trouble using the Odin because when I enter the Download mode on my phone and try to connect it via USB cable to the computer, a message appears saying that not computer recognizes, "uSB device not recognized", already tried everything to fix this error, installed Kies, drivers, went up on the computer's power options and continue with the same error.
So my problem is this, or I fix the problem "USB device not recognized" and recover the bricked phone, or is there another way to recover the cell without being by Odin?
Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box