I have been testing the N1 for a few days, and just making sure there aren't any hardware issues before I void the warranty (possibly) through unlocking the bootloader and flashing a ROM. I would like to know if it is possible to revert to a factory settings ROM with exactly the "out of the box" settings and OS.
Backup: Unlock, install a RA-nexus recovery, save current ROM to SD, save settings with a backup app.
Restore: Start RA-nexus, recover ROM from SD, do factory settings wipe.
Is this correct?
Currently you can't relock the bootloader, you can revert everything apart from this. It does void your warranty but apparently HTC have been decent about fixing rooted N1s with hardware defects anyhow.
justin2net said:
I have been testing the N1 for a few days, and just making sure there aren't any hardware issues before I void the warranty (possibly) through unlocking the bootloader and flashing a ROM. I would like to know if it is possible to revert to a factory settings ROM with exactly the "out of the box" settings and OS.
Backup: Unlock, install a RA-nexus recovery, save current ROM to SD, save settings with a backup app.
Restore: Start RA-nexus, recover ROM from SD, do factory settings wipe.
Is this correct?
Click to expand...
Click to collapse
As @nDrg said, you can't relock the bootloader, but you can restore the phone completely to the stock ROM... download the EPE54B stock ROM, rename it to PASSIMG.zip, copy it to the SD card, enter bootloader mode. The phone will find the zip and ask you if you want to apply the update... this will restore everything to the stock EPE54B ROM
Didn't work for me, please help...
Hello,
I tried to place the above listed file on my SD (tried the one from the link on your sig, and one from another source) and could not get it to recognize the file from bootloader, nor could I flash it from zip (via recovery).
I have been searching for a way to revert to stock ROM for days now (and I have been researching) and I can't seem to find a way that I can get to work. (I am running both cyanogenmod 5.06, and modaco's sense - switch back and forth with the RA revovery screen). I can't connect reliably to wifi on either, and want the option to go back to stock.
I'm very much new to Android (and the Nexus) thus I'm probably just missing some things that are obvious to more advanced users.
I was hoping that you might be willing to post a step by step guide to reverting to stock for newbies? (Explain each step, eg. I barely know what fastboot is). Or, do you know of a guide that you could point me (and others I'm sure) to?
One might ask why I rooted and modded my device when I did not understand enough of what I was undertaking to reverse the process. One would be absolutely correct in such a question! That being said, if anyone is willing to help, it would be much appreciated.
Thanks so much,
Randy
Just curious why you'd want to go back to stock?
prettyboy85712 said:
Just curious why you'd want to go back to stock?
Click to expand...
Click to collapse
@prettyboy85712:
I do love both cyanogenmod and modaco's sense rom, but I haven't been able to connect via wifi on either for quite awhile (though normal network connection works fine). To be more specific, if I have been able to connect via wifi without the sim card in the phone, but not with it inserted.
As well, it seems like a good idea to be able to revert to stock if I did need to (stock updates, etc.) and I'd like to try wifi with stock, to see if it's the phone or the ROM. (My fault for not figuring out how to do this before I modded )
Thanks so much,
Randy
if u want to go completely back where u still receive ota (minus the locked bootloader that u can't change that its unlocked) u can download the signed secure nexus 1 Rom from modaco and then flash the boot,system,and recovery.img though fast boot go to nexus one forum and search rolling back to stock Rom it gives detailed instructions on how to do it I did it to make sure it works and was simple it is and u even get ota updates from Google hope this helps if u need any help just send me a pm good luck let us know how it goes
-------------------------------------
Sent from my Nexus One
Okay i have a sprint cdma hero i sm running 2.1 sense. I started out wanting froyo i knew i had to root so i did with universal androot and then got rom manager i didn't partition sd card because i thought it wasn't needed i still dont know if it is? but anyway after that i rooted the phone then went into rom manager, made a clockwork backup then I did what i was suposed to too root it then it was about to boot up and instead of froyo it was back to sense and had restored to factory. I repeated the same thing multiple times and tried different roms it still didn't work. After all this i restored my phone and its back to normal but google "can't establish sever connection" so mail, market, talk and all that does not work! I dont know what to do. I have tried hard reset, clearing data, cache, force stop, adding another account, signing out of talk and going back in and nothing has worked. and now in my notification bar it says sign in error! with my google name and then if i touch that it will bring me to a sign in screen, i enter the password but nothing works. I dont know what i should do help! by the way I live in america, internet works, phone calls work, sms works just not google apps, I have sprint to. And if there is any way you could help me root and run froyo the easitest way please help. I am kind of new at all this.
Thanks again- Luke
Did you make a nandroid backup? If so, restore the phone. I am pretty new to this too but maybe you can try to flash the google apps, you can find the zip on here with a search.
Did you do "wipe all data" before installing? You have to do that.
Make sure you also "nandroid" and make a backup in case you need to restore.
Ok put the cm6 rom on your sd and also google gaps .
make a nanidroid back up then wipe your phone then flash the rom then the google gaps. Then reboot
i did make a clockwork mod backup and restored my phone to that that is how it is the way know i will try and get google apps and reinstall them and if that works i will do the cm6 rom but where should i get it and do i need to partition sd card? thanks
I have recently flashed the JVS firmware from samsung firmware, and then followed that up with this CF-Root-XX_OXA_JVS-v4.1-CWM3RFS, flashing via the PDA section in ODIN. My phone has been working perfectly for a few days, no problems at all, until right now when I've gone to restart the phone.. I was having troubles with the market, and I turned my phone off mid-download of an app.. I'm pretty sure it was mid-download and not mid-installation of it..
However, when I turn my phone back on, it'll show the Galaxy S I9000 screen, then go to the next screen with the glowing S, however after that, it just gives a quick, short vibration, and seems to turn off, then do it all over again..
What does this mean? Is there a way I can get out of it without re-flashing the entire firmware? I am still able to get into download mode, but I don't want to lose messages that I have saved on my phone..
Any help is greatly appreciated..
Denno
Ok, so I let the phone go for a while (around 10 minutes), of the screens cycling through as mentioned above, but now it seems to have actually found a way into the phone, and has now loaded up properly.. However, I'm still interested in what the problem could be on the phone??
are u using new market app?
its happened to me once and i reflashed whole firmware starting from 2.1 to 2.3.5 lol just to avoid sh*t like that
When I had 2.2 on there, I had the new market app, however after flashing 2.3.5, it had the old market, so I was downloading apps from the old market at the time..
What do you mean you re-flashed whole firmware from 2.1?
Anyone else have any ideas?
Try to wipe factory reset and wipe cache or try to flash rom again
Wysłano z GT-I9000 z użyciem Tapatalk
Could be a corruption in the bootloader, if it happens again i would reflash. Otherwise just leave it i guess, maybe it was a one off
It happens pretty much all the time now.. I have reflashed the firmware a couple of times.. And it still seems to happen. What would wiping the cache remove? Will I lose any settings or anything that I have on the phone? I have been restoring backups made using titanium, however just apps and data, not system settings..
If it's the bootloader, is there any way of fixing that?
Thanks
Ah that could be the problem. Sometimes when you restore backup they can conflict and thus cause issues like this...
Try only return the data, that works for me. Get app list from the market and after a backup move to external sd. Format internal sd card. Then do an Odin flash with repartition checked. This is designed to get you back to factory state, so you will loose everything. Make sure your backups are not on your internal sd when you format. Also before you flash i think its a good idea to put a copy of your nandroid backup into the internal sd. Or just use a nandroid backup from when you phone was working fine.
Deleting cache does not delete your settings usually, however when deleting dalvick cache it can take up to 30 mins (max i think) to start you phone, but usually its 5/10 mins.
Yes bootloader can be fixed just find a flashable bootloader with a rom or the directions given. Use search for this
Ok thanks for the tips Talon.. Firstly, this nandroid backup that I keep hearing about.. What exactly is that? Is that the backup that I do through Clockwork Mod Recovery? I'm also unsure how to return just the data to apps? I had a look at Titanium Backup, and the only data recovery option is for system data.. Everything else I think I can handle..
Thanks
Yes nandroid backup is the backup through CWM. You should always do one BEFORE you flash anything on your phone. And keep them in a safe place and leave one in your internal sd card.
You should use titanium backup to backup up a single app at a time, not batch. This way you'll have more files and can choose which apps you want to return, and if you only want to return the data. (I have always done it this way, so i dont know if you can pick the apps you want to return if you do backup via batch.). Use the other app i suggested to keep the market links, so you download the app from market first then you install the data once its there.
I suggest you don't return any apps at first see how it goes, then add either a couple or one at a time, again only the app data. (Once you backuo the app individually, flash then, TB, backup/restore press on the app, restore, then pick data only...) If you go from froyo to GB i think you cant do it)
Thank you very much for your reply Talon. I am currently on JVS, and plan to re-flash this exact same firmware, which is the stock firmware, nothing custom..
As for what you've written, it's going to take me a few reads before I can get my head around it, but I just wanted to say thankyou for a quick and detailed reply. I think I might just bite the bullet and figure out which apps I actually use, and just work with them for now..
I'll post back soon hopefully with results.
After getting very frustrated with the phone, I've finally re-flashed back to a seemingly stock situation. Phone is running great, and all problems seem to be gone. Slowly re-downloading apps from the market as I feel that I need them, so I hopefully won't get any interference from the old backups I had..
One more question, how do you make your backups? If you say you don't use the batch mode in Titanium? I can't see any other way that's as easy..
Thanks for your help Talon.
As i said before, backup/restore click on the app you want to back up, and click backup. When you want to restore it, back to the menu, click on the app, click restore, then pick data only longer but safer
Change the location of TB to your exsd if you haven't already, then go to setting find, and it will make it default location
Ahk.. Sounds very time consuming.. lol..
Phone is running like a champ now . Thanks
Hi all,
I have been trolling through all the forums on the GT-I9300T then the 9305T, and found so far a heap of tips and tricks for tweaking my phone.
I've been happily Rooting and ROMing my 9305T for a month now all without issue. What I've noticed is that with each ROM i put on my phone, it accumulates more files, folders and other legacy junk from the previous ROM. Do that over four ROM's and you get the idea...
So i thought i would restore from backup, my factory ROM which i have on internal and external SD. Unfortunately the restore came up with an error saying it was missing a file during the data backup (The Boot, Cache etc. all restored without a hitch) so it went into a boot loop...
I got out of the boot loop OK, installed the correct factory ROM form SamMobile and all is well. The phone works and everything is intact, but i now have a lot of junk on my phone I'd like to get rid of to restore it to the day i bought it. With my backup image not working can a full wipe and re-install be done to accomplish this?
Hi,
Title pretty much says it all. Trying to go back to stock after ****ing something up using titanium backup. Phone still works, just a little buggy, tried undoing what I did using Titanium but it locks up. So I just want to essentially do a factory reset on the phone so I can try again. I have backups but they were from MM and as I understand it I can't go from Nougat to MM without potentially destroying my phone so i'd only use those as a last resort. Can't do a factory reset from within the phone because the file that got deleted was probably a system file and that won't be coming back unless I can find a way to restore it using Titanium which as I mentioned earlier won't work properly.
Alternatively a guide to resetting everything back to stock including recovery. As I would prefer to start completely over with the updated files.
Thanks