After i installed the recovery TeamWin (TWRP) (it was successful), i tried to flash Xposed Framework manually, i got again an massage "it was successful". But after that i can not start my Samsung Galaxy A5. It shows me only the Samsung Logo and nothing happened. When I try to hold Power + Vol Down buttons it reboot but it does the same . please help me.
Obviously you flashed a wrong version! What ROM is that A5 running? Gather that info first, then know what is its architecture, I mean 64 bit or 32 bit, then find the appropriate version of Xposed and flash. That version you flashed, whichever that is, it should have an uninstaller package, flash that to solve the loop issue first.
Make sure you're flashing the right version BEFORE you actually flash it. Flashing takes a few seconds, but reading doesn't, so please read carefully. Rushing will only make things worse.
Not sure.
I think I flashed the xposed rar as an image , xposed didnt installed because of it .
I really dont know much about phones ect..
You need the unofficial wanam xPosed. Found near the top of this board (xPosed General)
Related
Hello,
I am a noob trying to install a rom with aroma installer. But now it has been stuck at the page where it says: The installation wizard has successfully installed *********. Press next to exit.
What do i do? Power off?
Is it definitely stuck? Aroma doesn't always recognise touch events very accurately, and I usually have to tap the "next" button a few times before it registers. Failing that, if it's finished installing whatever you flashed, you should be fine to reboot manually anyway.
Yes,i have tried to push the next button many times but nothing happens. It has been like this for 30 minutes now. The successfully installed text appeared very fast, a second or two maybe after the previous screen. So if it has installed the rom, it was def a fast install.
Anyway, is it safe to try to reboot, even if it was in the middle of the install? Rebot to recovery and try again?
Well, there certainly isn't anything else to be done besides rebooting. I don't know what you were trying to install - if it was a several-hundred-MB ROM, as most things that use Aroma are, you would expect it to take a while. Smaller things can be flashed very quickly. If it _did_ go wrong somewhere, there are a few things:
1. What recovery, and what version thereof, are you using?
2. Did you wipe data before using the installer?
3. Most of all, what were you trying to install? There might be some known issue with certain configurations.
I wouldn't necessarily expect a working OS when you reboot, depending on what you were trying to install and how badly things went wrong, but you should be able to get back into recovery easily enough.
Thank you for your quick reply.
1. I use the CWM recovery in this http://forum.xda-developers.com/showthread.php?t=1914394 thread, not the newest, but 5.5 something i believe.
2. Yes, wiped all data + dalvik.
3. I was trying to install rXTREME on my SGS III lte i9305.
I've rebooted now, and everything works perfect as the phone was before i tried to do the install. No brick. I also tried to flash it one more time, but stuck at the same place again. Rebooted fine at stock rom again. Maybe i should take this as a hint that someone else should be put at the steering wheel.. :laugh:
EDIT: forgot link above
Found out what the problem was.
In Aroma Installer i selected EFS backup both times. The third time i tried i did not do this. And everything went fine. Runs smooth.
my galaxy s3 international version got stuck at 30% of formatting\data partition while trying to flash s4 revolution 4.1 rom
what should i do?
jehad.drarjeh said:
my galaxy s3 international version got stuck at 30% of formatting\data partition while trying to flash s4 revolution 4.1 rom
what should i do?
Click to expand...
Click to collapse
This is I9305 forum is this your phone ??
This thread is about Aroma installer is that your problem ???
Suggest you read the basic faqs and guides first looks like from your post you are either flashing wrong rom to your phone or have hijacked a thread in the wrong forum ./
jje
Hello all. Hoping I can get some quick help, as I'm leaving here soon for the rest of the week, and REALLY need my phone!
Running Dynamic Pop 6.0 Rom on my T-Mobile phone. I tried to install Xposed from this thread with TWRP....
http://forum.xda-developers.com/showthread.php?t=3034811
(installed the xposed-sdk21-arm-20150430.zip file)
It said it installed successfully, and to reboot. I rebooted, and now it boots to the Samsung screen and stalls there. It won't boot up any further. I can still pull battery and reboot into recovery and download mode. Any suggestions?
Try this one instead
http://forum.xda-developers.com/showthread.php?t=3113463
Also search for xposed talk in the PopRocks thread.
Thanks.
I ended up just flashing the stock rom and starting from scratch.
Hey everybody,
i hope so much, that anyone can help me. After i installed the recovery TeamWin (TWRP) (it was successful), i tried to flash Xposed Framework manually, i got again an massage "it was successful". But after that i can not start my Samsung Galaxy S5. It shows me only the Samsung Logo and nothing happened. Of course i tried via TeamWin an factory reset but i still can not boot my smartphone (Stop at the Samsung Logo). My S5 ist rooted, i`m using 5.0 (lollipop). Version of the TeamWin was 2.8.7.0 and of the Xposed Framework "xposed-v74-sdk21-arm". Has anybody an idea? I would be very happy. Should i delete the TeamWin recovery? But how? I want to install the standard recovery of Samsung, but how to do this? Where can i find the original Recovery from Samsung?
Xposed isn't supported on latest Android versions (r23). You should just remove Xposed from your phone, by using this tutorial:
Code:
http://forum.xda-developers.com/xposed/xposed-lollipop-stuck-bootloop-t3055816
Deadclysm said:
Xposed isn't supported on latest Android versions (r23). You should just remove Xposed from your phone, by using this tutorial:
Code:
http://forum.xda-developers.com/xposed/xposed-lollipop-stuck-bootloop-t3055816
Click to expand...
Click to collapse
Thank you, but i cant find the xposed folder...because i made a factory reset
Just delete the files and folders that you can see (those which are Xposed related). It should fix your problem.
Or just flash ovet your rom again (dirty, without wiping).
Sorry it took long time for me to answer.
Edit:
Read sticky, there's a script that uninstalls it automatically. This should work 100%
always make nandroid backup before flashing
Having the same problems
So I'm having the same problem. The Framework says it installs correctly, but after reboot, device gets stuck at the Samsung screen. I don't understand the comment android r23. I'm looking at the build info and I don't see this anywhere. Some explanation or assistance would be great.
I'm not sure why sdk 23 was even mentioned as Lolliopo 5.0 is sdk 21.
@LieberKerl, you got the xposed-v74-sdk21-arm.zip from Rovo89's thread, correct? If so this will not work on stock Samsung Touchwiz ROMs as mentioned in the first post of that thread.
There is no Xposed that will work on a stock Samsung Touchwiz ROM, it must be deodexed first and if you have a deodexed ROM, you need arter97's unofficial Xposed from this thread: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463.
If you don't know what deodexed is, there's a bit of reading ahead of you. If you don't want to deodex your Lollipop 5.0 ROM, then you're out of luck.
It takes longer to boot after the install, how long did you leave the samsung boot logo up? it took nearly 15 mins to boot after rom install and around 5 mins after xposed framework. I went through alot of hassle just to discover i was impatient.
Reflash stock ROM with Odin.
after flashing in my unite 3 notification bar disappeared and phone is restarting again and again
Nerotech11 said:
It takes longer to boot after the install, how long did you leave the samsung boot logo up? it took nearly 15 mins to boot after rom install and around 5 mins after xposed framework. I went through alot of hassle just to discover i was impatient.
Click to expand...
Click to collapse
Happened to me too on an Oukitel C4. After flasing it needs quite some time to boot.
Cannot Install Xposed in Samsung Galaxy S6
I have the same issue with a Samsung Galaxy S6. I tried installing "xposed-v87-sdk23-arm64.zip" using TWRP. But Every time I do it the phone either goes completely black or shows the Samsung Logo flickering permanently. To fix this I need to go into TWRP again and install "xposed-uninstaller-20160829-arm64.zip". I tried leaving the phone with the black screen/logo flickering for over 1 hour hoping it might be installing something but the only way to turn the phone back on is with the uninstaller.
I thought that it might be due to not having OEM unlock enabled, but I cannot find the option in "developer tools". Then I tried to do it through ADB command lines but when I enter the command "fastboot-windows oem unlock " it gets stuck with the message "waiting for device". So I also tried installing PdaNet both on my windows 7 PC and the phone itself (Android 6.0.1) and I made sure I have the phone drivers installed on my PC.
All I want is to use Xposed modules on my Galaxy S6. Is it even possible? If so, what should I do?
I appreciate any suggestions.
Thank you.
InfiniteSegovia said:
I have the same issue with a Samsung Galaxy S6. I tried installing "xposed-v87-sdk23-arm64.zip" using TWRP. But Every time I do it the phone either goes completely black or shows the Samsung Logo flickering permanently. To fix this I need to go into TWRP again and install "xposed-uninstaller-20160829-arm64.zip". I tried leaving the phone with the black screen/logo flickering for over 1 hour hoping it might be installing something but the only way to turn the phone back on is with the uninstaller.
I thought that it might be due to not having OEM unlock enabled, but I cannot find the option in "developer tools". Then I tried to do it through ADB command lines but when I enter the command "fastboot-windows oem unlock " it gets stuck with the message "waiting for device". So I also tried installing PdaNet both on my windows 7 PC and the phone itself (Android 6.0.1) and I made sure I have the phone drivers installed on my PC.
All I want is to use Xposed modules on my Galaxy S6. Is it even possible? If so, what should I do?
I appreciate any suggestions.
Thank you.
Click to expand...
Click to collapse
Most likely your issue is caused because you did not install the correct framework version. You need the one from wanam. Just search for "Xposed Samsung wanam" and you'll find your answer.
Hello guys,
I have a Samsung Galaxy S7 Edge (SM-G930F) - ARM64x which is Android 6.0.1 (Marshmallow).
I flashed the correct Xposed Framework following this thread: http://forum.xda-developers.com/showthread.php?t=3034811
Once I flashed, I could not boot my phone at all. It is stuck at the Android Logo when it starts up with a red error at the top stating: "kernel is not seandroid enforcing".
I can enter TWRP (Recovery) and I can enter the Downloading-Mode.
The huge issue is that I do not have the Uninstaller Zip in my storage anywhere (I did not know that I would need it in case something like this would happen).
I tried entering the Downloading-Mode to download the Uninstaller into my storage, but I could not even do that since the storage does not even show up at all, as if I have the USB Debugging off (it was not off, but I suppose it is off now).
I suppose I can use Odin. But I tried flashing TWRP again, nothing changed. I do not have a Stock ROM/Firmware, so I downloaded one and tried flashing it. It did not work.
I tried going to the Recovery to Wipe everything and such, and it still did not work.
What am I to do?
Please help me out!
Dozens of thanks!
I installed Xposed Framework for ARMv7 on my galaxy tab s2 on 6.0.1 marshmallow. I installed it through twrp and after i rebooted the phone wont boot up. now the screen is "on and off" hard to find ways to stop it, but sometimes it boots to download mode, but when i had to try to flash stock firmware and new custom recovery via odin it fails says " Can't open the serial(COM) port". any help or suggestion would be much appreciated. :crying:
For the recovery of your device it's probably best to go to your device's forum for help.
About Xposed causing this issue... I'm guessing you got the Xposed zip from official Xposed thread (stickied right at the top of the Xposed forum). If so it would have helped you to read the "Known issues" before continuing.
If and when you get your device up and running again, search for Wanam's Xposed for Samsung, instead of the official one.