Relock bootloader. (this will change bootloader unlocked status to relocked ) - P8lite General

Hy everyone.
in this post am going to show you how to relock huawei bootloader. ( this is the method is given in huawei official website. do it in your own risk. proceeding with this method wil format your device, make sure that you backup .)
lets start.
1.Download your device firmware.
2. From that copy dload file to sd card.
3. poweroff your device and insert sd card.
4. turn on the device by pressing power button and volume up and down buttton
5. Now this will install huawei firmware and it will take some time to bootup.
6. when you finish installing put your device in fastboot mode.
7. then connect your device to pc and openup adb.
8. Type this commands.
#. fastboot devices
#. fastboot oem unlock *******************
(*********** :- refers to 16 digit unlock code )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After this your device will reboot and unlock status will be changed to relocked .
macbeth

Related

[Tool] EDL Tool for Mi MIX 2

Today I bring you a tool to put the Mi Mix 2 in EDL mode.
With this tool you do not need EDL cable, nor open the terminal to make Test point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then they load the system with miflash
You need to have the bootloader unlocked.
Instructions
1 - Go to Developer Options and enable USB debugging Mode (Optional)
2 - Turn off your Mi MIX 2
3 - Go to fastboot Mode by holding VOL(-) and Power key
4 - Connect your device to PC using USB cable
Download
https://mega.nz/#!BscDjIRZ!YmNlAppi4KVlrjEFvNZvvgxAWdjSp-ZECfMhnv4Cnv4​
Can't you use any fastboot rom in Mi Flash anyways?
Thx. Worked for me!
Will it work with locked bootloader? Phone is bricked already , it comes with Chinese, unlocked to install global and lock.
Thanks for your work
whats the different from typing fastboot oem edl on adb?
It does not work for me. After hitting enter, it shuts down, the LED is on, but device manager does not recognise is.
MY phone is locked, unfortunately (MIUS lock)
unbelievable, you saved my device!

Ale-L21 real brick help

I tested different rom's and one of them brick my phone, I think because of flash some ram partition or wrong phone version rom something like that.
I have unlocked bootloader but can't boot in recovery, when boot normal or vol + show me Rescue mode with errors :
Func NO: 9 (dsp image)
Error NO: 1 (security verify failed)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with fastboot, I tried update command with official rom but give me an error
try flash recovery with twrp and complete successfully and all .img from official rom - boot, system, .... and they finished successfully and still can't boot normal or recovery
try with sdcard with update.zip and dload folder again boot rescue mode
try some tools like Multi-Tool 8, windroid toolkit and others. And cant boot in recovery from vol + or fastboot command
also adb not working
sorry for my English
can anyone help me? Thank you

Emui recovery does not allow to wipe data/factory reset

Hello!
Mom of my friend tried the fingerprint lock method on her phone, and she has forgotten that it requires remembering PIN code that has been set.
For now, we’ve tried to manage a factory reset from System Recovery, but this piece of electronics does not allow us to select that option.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have any one go an idea how to manage factory reset at this point?
I think that even if u do reset ur device it will ask for PIN again.
Since when factory reset keeps user data?
I don't know if other way is available for recovery pin code. For now I suggest to reinstall the firmware using network metod.
-Turn off the mobile device
-Press up and down volume
-Connect the mobile to PC using a cable
in this way you can dowload the last firmware and reinstall it
Another way is using the dload metod.
you can download the prolerly firmware from:
https://androidhost.ru/search.html
then copy the dload folder on SD card
and restart the phone with volume up and volume down and power on
I will do a guide how to reinstall original firmware or remove brand from phone.

Question FLASH GUIDE

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I posted two Screenshots, One is my current one and the other one is which i want to install, I want to make sure if it is ok to move directly from. Miui a11 to a13, or there will be some other process, it would be great if you guide me with the steps in both cases
Thanks
Yes you can directly move to A13 Custom ROM.
But before you can do that, you have to do the following:
1. Enable Developer Option.
2. Unlock bootloader (OEM unlocking)
3. Create MI account and follow instructions for unlocking request.
3. Wait for one week. Xiaomi will authorize the unlocking.
4. Use the Xiaomi unlock tool.
5. Enable USB debugging.
6. copy the rom.zip in your SDCard.
6. Using ADB , boot to TWRP.
7. from TWRP, install the TWRP recovery image (optional)
8. follow the instructions for flashing A13. Normally you need to wipe DATA partition.

Bootloader

Hello, people of the Xiaomi Mi 9.
I have owned this device for a while now and I have a problem that I would like to share with you.
A short time ago, I closed the phone's bootloader to make it like new... And it was a serious mistake.
I bought a new mobile and thought about using the old one as a backup.
This endorsement should have:
- Bootloader unlocked
- Root activated.
I must add that that device had a Mi account that belonged to me and I deleted it.
After doing that, and closing the bootloader, using the precious command of:
- fastboot oem unlock
Appears the next message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried to use the Mi Unlock software but when I enter my new Mi account and press the Unlock Now button, I get the following (What is covered was the ID of my old Mi account)
I have tried to insert my SIM card, add the new account, activate the OEM unlock option and try to unlock the bootloader using Fastboot... But I get what I indicated...

Categories

Resources