My cousin tried to hard reset his Myphone UNO using recovery mode. Then the phone suddenly turned off. I tried to turn it on using the power button and nothing happens, tried to go recovery mode but no luck. When I charge it the phone will turn on after a minute showing the battery (its like charging) then less than a minute the screen will go off and flashes once or twice then off, few minutes again it will show the battery then off and flash it will be in loop. I tried to flash it on my PC but the tools even my PC cant detect the phone and it will be on the loop again just like I use the charger. I cant still get to boot menu, after the screen turn off it will flash then i tried to press power up key it will enter boot menu it shows:
[Recovery Mode]
[Fastboot Mode]
[Normal Boot]
[Normal Boot +ftrace]
[Normal slub debug off]
whatever i select or even if i dont select any option it will turn off automatically then the loop will keep going. Is there any chance to make this phone work again? Thank you in advance!
i'm no professional, but i would call that a hard brick. i wanted to do the exact same with my SP, but it got a hard brick. and the fact it lets your there means nothing, (probably) my phone did that also but still looped.
try:
getting into fastboot, (download adb, drivers for the device, and find an official way to FORCE it into fastboot or other ways you can access it from adb)
using flash programs: if it's a mediatek chip, it can get a new system flashed via SP flash tool. get a rom, and if it has a scatter file, you can flash it with SP flash tool. find a guide for it: my guide is only to get a STOCK ROM (important, kinda) get the scatter file, make sure the phone IS OFF (VERY IMPORTANT)!! and press download. you can double check with online guides and if it's not a mediatek, screw this option entirely.
go to a professional or get a ****ing expensive tool for hard brick recovery.
or try the soft brick methods.
also, get a new phone. myphone uno is ****, and you can find better stuff than Myphone. it's not worth the work most likely.
this post is probably very outdated, but i tried.
Related
Trying to avoid buying a new phone to replace my really slow bionic by flashing the rom. I screwed up somewhere (maybe several somewheres). Anyway, where I am now is: I installed TWRP 2.6.0.0 installed (with SafeStrap 3.11). I created a Titanium backup and then tried to flash Flying Jelly 1.1 without wiping the stock slot. It was downhill from there. Right now, when I power up, if I go straight to boot, after the Motorola M, the screen goes dark with a glowing backlight and stays that way. If I go into SafeStrap/TWRP, I get all the right options. I tried Factory Reset, it completes almost immediately and nothing changes (still hangs in boot). I tried Install to flash stock 4.1.2 but that didn't work. I tried using RSD Lite but if I plug in (USB) and let it go through boot, when it hangs, USB communication doesn't work. I tried RSD Lite in SafeStrap with USB mounted but that doesn't work either. I can still get to the internal storage in SafeStrap (and have saved a copy to my pc). Is there anything else I can do before I surrender and toss the phone?
Have you tried manual install though stock recovery?
It's equivalent to fastboot FXZ, but you install via ext_sd card rather than usb cable.
You get into the stock recovery similar way as fastboot, but you choose revoery instead of fastboot.
You'll need a different zip to install by sd that's different from the FXZ file.
bobdole said:
Have you tried manual install though stock recovery?
It's equivalent to fastboot FXZ, but you install via ext_sd card rather than usb cable.
You get into the stock recovery similar way as fastboot, but you choose revoery instead of fastboot.
You'll need a different zip to install by sd that's different from the FXZ file.
Click to expand...
Click to collapse
I too have a similar issue..I was running Blurred effects JB ROM and it was giving me issues. I took out the battery and put it back in. It loaded this boot menu loader and I couldn't go back to my main JB system. So I deleted the system file that kept sending me to stock rom thinking it would send me back to my jelly bean side. Now it remains black... I can do the whole up/down vol keys but AP fastboot doesn't work. When I plug into my computer is like the phone doesnt connect. I go in device manager and nothing is there. I cant go to recovery either... it give me the android logo with a red caution sign. I cant do moto helper or RSD lite if the phone is not on the system
phantomprime said:
I too have a similar issue..I was running Blurred effects JB ROM and it was giving me issues. I took out the battery and put it back in. It loaded this boot menu loader and I couldn't go back to my main JB system. So I deleted the system file that kept sending me to stock rom thinking it would send me back to my jelly bean side. Now it remains black... I can do the whole up/down vol keys but AP fastboot doesn't work. When I plug into my computer is like the phone doesnt connect. I go in device manager and nothing is there. I cant go to recovery either... it give me the android logo with a red caution sign. I cant do moto helper or RSD lite if the phone is not on the system
Click to expand...
Click to collapse
Are you saying that you can't get into AP fastboot mode, or that when you are in fastboot mode, your phone won't connect to your PC?
If you can't get into AP fastboot, take out your battery wait for 3 sec. Push all 3 buttons (pwr, vol up, vol down) all together then put the battery back.
As for recovery mode, once you get the robot with the caution sign, you need to press vol up/down together for the recovery menu to show up.
You might have to do it a few time before it shows up.
bobdole said:
Are you saying that you can't get into AP fastboot mode, or that when you are in fastboot mode, your phone won't connect to your PC?
If you can't get into AP fastboot, take out your battery wait for 3 sec. Push all 3 buttons (pwr, vol up, vol down) all together then put the battery back.
As for recovery mode, once you get the robot with the caution sign, you need to press vol up/down together for the recovery menu to show up.
You might have to do it a few time before it shows up.
Click to expand...
Click to collapse
wow thank you...it was a major difference from laptop to PC..after I updated my systems usb drivers as well ad other key drivers for the mother board it recognized my phone ad cdma targa fastboot mode. I was able to get back to stock and reroot:highfive:
Ok, so there are a lot of threads about soft bricks and bootloops, I have answered in a lot of threads but it seems it needs separate thread to explain how to "revive" your phone from bootloops and soft bricks.
First of all, I don't guarantee that it will work but mostly this tricks do their job.
Tricks were tested and worked on many phones, but I don't take responsibility for hard bricked phones after performing tricks from this thread.
Sometimes you need to repeat process because everything must be done with perfect timing. Also if one method won't work try another.
1. Prepare your phone to press recovery combination and while plugging phone to USB or charger, hold keys and release when samsung logo appear. Do Factory reset in recovery
2. (the best) turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery
(3). Emergency download mode (when phone wib but don't turn on screen) - take off battery for few minutes, after that time hold download combination and insert battery, wait few seconds (so normally it would boot and enter dm), accept terms by pressing volume down, connect USB and flash stock Rom
4. usefull tip - Always have backup created in CWM on phone, you never know when it will be needed. What I do is creating backup every week/two weeks, also I have stock backup. I really recomend to create backup before flashing CM while you are on stock (it will guarantee everything will 100% work if something fails), it helped me a lot of times.
(recovery combination - volume up, volume down, power, home)
(download mode - volume down, home, power / accept terms volume down, decline - volume up)
In 1 and 2 "just in case" you can flash stock Rom, when it will start to reboot after Odin finish flashing, take off battery and insert again (to stop boot process) phone should boot into recovery normally but repeat point 2 to be sure.
Also, what is importiant, ALWAYS have turned on debug mode in your usb settings, first thing you should do after flashing CM, turn on debug mode.
===================================================================================================================================================
When you are switching from CM to stock, after flashing stock you will have almost 100% chance that you will have bootloop on samsung logo. You have to factory reset before first boot. So, after flashing stock, when odin will proceed reboot your phone, unplug phone and take off battery (take off battery cover before flashing, but be careful not to drop battery while flashing via odin, it would be really really bad for your phone, hold phone and battery all the time). After inserting battery back and assemble cover, go to recovery and do factory reset.
Share your thoughts and experience here.
Bump
You should contact a moderator and ask him/her to pin this thread.
help please
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:
yudha wira said:
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:
Click to expand...
Click to collapse
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me
Peky031 said:
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me
Click to expand...
Click to collapse
I had this problem. Reflash CWM. Then "turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery"
Thanx man it worked. Several attemps in 2 days.
Verzonden vanaf mijn GT-S6500D met behulp van Tapatalk now Free
Thank you for this ! The decline download mode agrements , press recovery combination trick worked , I managed to get to recovery ! I flashed stock rom 3 times and tried repartition with pit ...but this is the only thing that worked ! Thank you
Now I have a Idea about a Un-brick:
1. If you want to return (after a Forget a clean data/cache/dalvik) When You can downgrade with .md5 Stock ROM (or Custom)
2. If Recovery Doesn't works... You can only Download Mode (Volume Down + Home + Power) - Remember it's that's not with SIM/SD Card [Maybe that's optional if it forget but I will be recommend.]
3. Flash to Newest "ClockWorldMod"
4. After Restart - That's must be take off battery and Connect USB Cable to SGMII
5. Let's Turn On Recovery Mode with a "Samsung Logo" Before Input Battery [With a Battery it's doesn't does it Start,on Fortunately...]
6. And... Let's to clean data/cache/dalvik... And that's All of "Open source Unbrick"
What Did a get:
+ Downgrade ROM without a Additonal Box (Because that's Open source with a Easy-Root and Not Close-Source as a Self of Old Sony Ericsson Tuning - But I Like a Old Sony Ericsson's Too ... And "Sony" looks from a 2007 about a Modifications and Sony is not a blocked for Android - Fortunately... And for a Today Some users remembers about a Big Seasons Tunings from K310i or K550i [I had a Two phones... That's nice what I discovered about a ROM's Modifications... And Let's praise for Sony that's Not blocked for Androids... Thank you,Sony. ]
+ That's can be again to Upgrade eg. Cyanogenmod
And... A knowledge... Hope that's share a help.
might want to consider adding this
Hi OP, you might want to add this to your thread..
so, early this week, i faced a bad bootloop situation after the software update.. Even with a normal boot (no vol+,home button and power button pressing), my phone will still be stucked at CWM recovery..
Note that my phone was working fine, only the software update caused my phone to stuck in the CWM bootloop..
So, what i did was, i updated my CWM 4.0.8.2 [ my bad, cause when i rooting my phone initially last few weeks, and i've been reading outdated threads].. So, i updated my CWM 4.0.8.2 to CWM 6.x through CWM recovery..
Then, after it rebooted, i go to download mode, connect my phone through ODIN and flashed stock rom.
Now, it is working fine like new..
Hey guys,
I've really been going through the forums and trying to find a fix for this, but most "unbrick" solutions require I put the phone in download mode. I've had plenty of times before where I had to do the whole button-combo to get into TWRP, but right now all that happens is my phone will boot into the LG logo for a split second, then die. The button combo leads to the factory reset screen, but just shuts off. Plugging in the phone while holding volume + (or not holding the volume up, this happens regardless) just leads to file explorer opening up ten windows prompting me to reformat a bunch of different drives.
How do I get back into recovery, or unbrick, when I can't get into download mode or recovery via factory reset screen?
Much appreciated for your help here.
I'm in the same boat, I'll leave a reply if I figure anything out. Did you try to install the 24a update?
gbakeriv said:
Hey guys,
I've really been going through the forums and trying to find a fix for this, but most "unbrick" solutions require I put the phone in download mode. I've had plenty of times before where I had to do the whole button-combo to get into TWRP, but right now all that happens is my phone will boot into the LG logo for a split second, then die. The button combo leads to the factory reset screen, but just shuts off. Plugging in the phone while holding volume + (or not holding the volume up, this happens regardless) just leads to file explorer opening up ten windows prompting me to reformat a bunch of different drives.
How do I get back into recovery, or unbrick, when I can't get into download mode or recovery via factory reset screen?
Much appreciated for your help here.
Click to expand...
Click to collapse
This helped me: http://forum.xda-developers.com/showthread.php?t=2448960
It also has instructions to restore download mode: http://forum.xda-developers.com/showthread.php?t=2451696
PM me if you need help...
If your stuck in fastboot with NO bootloader OR recovery this should help.
Before you start you need to be a bit familiar with LINUX and preferably Ubuntu in particular (since the guide uses that)
The last step is a bit confusing since hes using varibles for all the path names but here they are written out if your phone is located under sdb:
Code:
dd if=/home/med/Desktop/sbl1.img of=/dev/sdb2
dd if=/home/med/Desktop/aboot.img of=/dev/sdb5
dd if=/home/med/Desktop/rpm.img of=/dev/sdb6
dd if=/home/med/Desktop/tz.img of=/dev/sdb8
dd if=/home/med/Desktop/recovery.img of=/dev/sdb15
If your phone is located under sbc change sdb to sdc
Hope this helps and remember to use the 11A partitions as 10b and 1b WILL NOT WORK
I really need help.
I've got my phone bricked and I can't even boot to flash mode or to recovery mode.
The last thing I've done is boot to twrp and clear data because I am going to change rom. But there is a certain error that pops up. and forgot what was it. After that, I try to flash the rom. But the same error pops up. If I remember correctly. e:ex4ts is not found? Something like that? And now. When I turn on my phone. The xperia logo still pops up. Then after that its only black screen. I tried going to recovery (power + Vol up + vol down) and also tried flash mode but nothing really happens. Its like not being detected. And when I try to charge it. The xperia logo pops up and black screen appears. The charging icon/animation is not popping up. Is there anyway to fix this? Please help. Any help would be much appreciated. Thank you.
Your phone is now bricked and won't boot into recovery.You need to flash stock rom via flashtool to recover your phone.Is that your phone's bootloader Lock?Unable to boot into recovery always happen in locked bootloader phone.
Use Flashtool to flash stock rom. But be careful to connect phone only when prompted. It should boot after that, then you can root phone again and try to install recovery again.
I have unlocked bootloader already. I think there is something wrong with the phone. I can't boot to flash mode and recovery mode. The screen continues to go black light. I've tried for more than 20 times already. But still. I can't go to flash mode. Can I go to flash mode by only connecting my phone to my pc?
http://forum.xda-developers.com/showthread.php?t=1963961
use recovery img to flash via flashtool.you'll get your recovery back
Thank you so much for answering my query. I figured it out before reading this. Yes, I forgot how to use flashtool. I forgot how to boot into flash mode. I used the method in Samsung devices (All buttons must be pressed) which technically my mistake. Thanks again.
So my phone just got bootloop stuck, After I flash using ADB ( last option because other flash app won't work ), it is Stop at super then my pc accidentally blue screen, So when I turn on my phone, I got bootloop, I can't Go to fastboot, Bootrom, But I can go to recovery ( Cant Use The menu ) idk why, My volume only work when I want to go recovery, but won't work when I was in recovery, I can't go fastboot, or bootrom, can someone help me? My recovery won't work, Only Power Button work, Volume button won't work,I'll try to change volume button flexible,still the same
Bad grammar lmao
You can visit the Xiaomi certified technician and flash the device all back into stock. Well, no one is responsible for your bricked device and that your host device experienced a crash while flashing the critical partitions. I'm not sure how you managed to get the bootloader messed up it can't boot into the fastboot.
try using SP Flash Tool, it helped me today to restore atleast fastboot