My g800h has qualcomm secureboot (csb) after downgrade to kitkat. It show AP SWREV: S1, T1, R1, A1, P1<br />
SECURE DOWNLOAD: ENABLE<br />
UOC START<br />
While I flash modded kernel, security setting menu force close and fingerprint scanner has issues. But I use stock kernel and root, it work normal.<br />
I try flash CM13, it has same error.<br />
I think bootloader cause this so I want to come back stock bootloader or anybody help me another way. Can anyone use Flash app from Chainfire to backup all stock partition and send it to me. It is very easy. This is that app http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
Sent from my SM-G800H using XDA-Developers mobile app
I would strongly assume that the bootloader is locked to your device, at it has some kind of encryption. Blindly flashing another bootloader enrypted with a different serial number for sure will result in something very nasty.
Related
Ok the galaxy s4 active SGH-I537 are all the bootloaders locked or not as i have read some post here and else where that say some are and others are not when I go into Odin Mode i get
Odin Mode
Product Name: SGH-I537
Current Binary: Samsung Offical
System Status: Offical
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSD-Config-Lsb:0x30
Write Protection: Enable
eMC Burst Mode enabled
Now judging by reading this i am assuming that it is locked just looking for confirmation. The Reason I ask is i am wanting to dual boot the Phone with this http://www.efytimes.com/e1/fullnews.asp?edid=125119. For ubuntu touch although it says i need to have an unlocked phone and rooted which mine is rooted however they do not specifiy whether or not the mean sim unlocked or bootloader unlocked and i am going to take a shot in the dark and say they are meaning bootloader unlocked. if so would there be a possability to load the dual boot under safestrap ?
The_Fallen_angel said:
Ok the galaxy s4 active SGH-I537 are all the bootloaders locked or not as i have read some post here and else where that say some are and others are not when I go into Odin Mode i get
Odin Mode
Product Name: SGH-I537
Current Binary: Samsung Offical
System Status: Offical
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSD-Config-Lsb:0x30
Write Protection: Enable
eMC Burst Mode enabled
Now judging by reading this i am assuming that it is locked just looking for confirmation. The Reason I ask is i am wanting to dual boot the Phone with this http://www.efytimes.com/e1/fullnews.asp?edid=125119. For ubuntu touch although it says i need to have an unlocked phone and rooted which mine is rooted however they do not specifiy whether or not the mean sim unlocked or bootloader unlocked and i am going to take a shot in the dark and say they are meaning bootloader unlocked. if so would there be a possability to load the dual boot under safestrap ?
Click to expand...
Click to collapse
The i537 has a locked bootloader, the i9295 does not. You cannot flash ROMs on the i537 like you can on the i9295.
Devo7v said:
The i537 has a locked bootloader, the i9295 does not. You cannot flash ROMs on the i537 like you can on the i9295.
Click to expand...
Click to collapse
That is what I thought thank you for the reply i guess teh Ubuntu touch dual boot is out of the question untill unlocked bootloaders become a reality for use g4 user lol
Just like the title says
Do you guys think the ATT S6 Edge variant would be root able? I'm trying to decide if I should just over to T-Mobile and have less coverage for a more friendly rom experience or stick with ATT and pray to the gods for root /unlocked bootloader.
Have to wait and see if the guys that got their phones today have locked bootloaders. Ive been waiting for someone to confirm this all day
My phone arrives Wednesday, and even if it has a locked bootloader, it can still be rooted (see below, S5 is locked and rooted), but I'm still curious about being able to root this thing.... Has the AT&T Note Edge been rooted? Haven't found anything saying it has yet, so that puts added pressure on finding out about this phone, theoretically
I have my Edge... The recovery log says it is bootloader G925AUCU1AOCE. Isn't that the same as the G4?
Any one been able to validate this yet?
doug0365 said:
Any one been able to validate this yet?
Click to expand...
Click to collapse
I can post a screenie if that will help...
Att s6 bootloader
jroyalty7 said:
Have to wait and see if the guys that got their phones today have locked bootloaders. Ive been waiting for someone to confirm this all day
Click to expand...
Click to collapse
just to let everyone know that when i went into bootloader it gave me a warning about running custom roms to but the text in the bootloader says this
odin mode red letters
product name sm-g925a
current binary samsung offical
system status offical
reactivation lock on
Secure Download Enabled Blue Letters
knox Warrenty Void 0 (0x0000)
ap swrev: 1
Kernal AP SWREV: 1
dont know if this will tell if the bootloader is locked or not
daphantoms said:
just to let everyone know that when i went into bootloader it gave me a warning about running custom roms to but the text in the bootloader says this
odin mode red letters
product name sm-g925a
current binary samsung offical
system status offical
reactivation lock on
Secure Download Enabled Blue Letters
knox Warrenty Void 0 (0x0000)
ap swrev: 1
Kernal AP SWREV: 1
dont know if this will tell if the bootloader is locked or not
Click to expand...
Click to collapse
I dont think it does tell us. But im concerned about reactivation Lock ON!!
raineyland said:
I have my Edge... The recovery log says it is bootloader G925AUCU1AOCE. Isn't that the same as the G4?
Click to expand...
Click to collapse
Obviously I meant the S4...j/s
The reactivation lock is set by US when we setup phone. You can turn that off.
G9600ZHU2ARE6 debloated, deknoxed, RMM removed, Verity removed.
Make sure you run CROM and Enable OEM UNLOCK in developer settings.
You need to format data to remove encryption from the data partition. TWRP does not support data decryption on Samsung devices.
FLASHING ANY CUSTOM BINARY WILL TRIP THE KNOX COUNTER
PLEASE MAKE A COMPLETE SYSTEM BACKUP INCLUDING EFS SO YOU CAN RESTORE FROM ANY SITUATION. USE SOME COMMON SENSE PLEASE.
CROM: https://www.androidfilehost.com/?fid=818070582850505818
G9600ZHU2ARE6 Rom Download: https://drive.google.com/open?id=1bxpVr23Y5Mef11beLFxzAjUtke4CZ0aa (upated June,13th,2018)
Travis_Kernel 1.2: https://www.androidfilehost.com/?fid=890278863836293624 (upated June,16th,2018)
Combination Firmware G9600ZCU2ARC7: https://www.androidfilehost.com/?fid=674106145207493310 (frp or drk locked? than flash stock firmware after you factory reset) (Bootloader V2)
Regards,
Travis82
do you have something for FD models ?
and does this also bypass that oem lock jail?
work on S9 9600 snapdragon "128gb" ? "C9600ZCU1ARBE"
This work por root? Thanks.
travis82 said:
G9600ZHU2ARE6 debloated, deknoxed, RMM removed, Verity removed.
Make sure you run CROM and Enable OEM UNLOCK in developer settings.
You need to format data to remove encryption from the data partition. TWRP does not support data decryption on Samsung devices.
FLASHING ANY CUSTOM BINARY WILL TRIP THE KNOX COUNTER
PLEASE MAKE A COMPLETE SYSTEM BACKUP INCLUDING EFS SO YOU CAN RESTORE FROM ANY SITUATION. USE SOME COMMON SENSE PLEASE.
CROM: https://www.androidfilehost.com/?fid=818070582850505818
G9600ZHU2ARE6 Rom Download: https://drive.google.com/open?id=1bxpVr23Y5Mef11beLFxzAjUtke4CZ0aa (upated June,13th,2018)
Combination Firmware G9600ZCU2ARC7: https://www.androidfilehost.com/?fid=674106145207493310 (frp or drk locked? than flash stock firmware after you factory reset) (Bootloader V2)
Regards,
Travis82
Click to expand...
Click to collapse
Hi, please... work on S9 9600 snapdragon "128gb" ? "C9600ZCU1ARBE"
RMM Locked
Hello, I'm with RMM in locked state, my model is the snapdragon G9600, can you help me to unlock the RMM? Thank you!
hi, have Secure Check Fail: recovery
i have applied everything (oem OFF, reactivation OFF, RMM prenormal)
Odin gives error, invalid binary
flash "Combination Firmware G9600ZCU2ARC7" - return read error on odim
EverCH said:
flash "Combination Firmware G9600ZCU2ARC7" - return read error on odim
Click to expand...
Click to collapse
Same here! :S
MCR31 said:
Same here! :S
Click to expand...
Click to collapse
Can you try this one: https://drive.google.com/uc?export=download&id=1MrkGoEI_QkhT3dO3o7t-4snTXjd6M65o
page: https://shell.boxwares.com/Download.aspx?L=6281
https://easy-firmware.com/home/browse/category/id/31504/
i flash the "Combination Firmware G9600ZCU2ARC7" but even so it does not accept install twrp error writing error , help! OEM IS UNLOCK AND USB DEBUG ON IN THE "Combination Firmware"
could it be used with G960U?
also, can we proceed rooting this rom?
---------- Post added at 07:24 PM ---------- Previous post was at 07:23 PM ----------
i tried this solution with G960U but even Crom is working on the device.
is there any work around to enable Oem unlocking for G960U?
hanymedic said:
could it be used with G960U?
also, can we proceed rooting this rom?
---------- Post added at 07:24 PM ---------- Previous post was at 07:23 PM ----------
i tried this solution with G960U but even Crom is working on the device.
is there any work around to enable Oem unlocking for G960U?
Click to expand...
Click to collapse
NO
NOT FOR 960U. You can hard brick (yes HARD BRICK) from flashing this on a 960U. We don't have the firehose programmer for these devices so you will have to send back to Samsung
Hi, I need to get everything clear until I reach the 7 days be prepare to unlock bootloader.
I from Mexico and have the G9600 model want to unlock bootloader to change CSC.
After we wait the 7 day to get oem unlock, first enable oem unlock and then CROM?
It's confuse because on others threads say if we wait 7 days and enable oem unlock the phone say need to factory reset and before reset boot on the OS and the oem unlock it's gone again and need wait another 7 days. So before enable oem unlock and factory reset when the phone boot to OS need to run CROM or wait other 7 days to enable oem unlock again and then run CROM? Or this particular model don't need to factory reset before enable oem unlock?
Dear ho do format the phone? On every of the attempts, got error 21 and also footer error.
travis82 said:
G9600ZHU2ARE6 debloated, deknoxed, RMM removed, Verity removed.
Make sure you run CROM and Enable OEM UNLOCK in developer settings.
You need to format data to remove encryption from the data partition. TWRP does not support data decryption on Samsung devices.
FLASHING ANY CUSTOM BINARY WILL TRIP THE KNOX COUNTER
PLEASE MAKE A COMPLETE SYSTEM BACKUP INCLUDING EFS SO YOU CAN RESTORE FROM ANY SITUATION. USE SOME COMMON SENSE PLEASE.
CROM: https://www.androidfilehost.com/?fid=818070582850505818
G9600ZHU2ARE6 Rom Download: https://drive.google.com/open?id=1bxpVr23Y5Mef11beLFxzAjUtke4CZ0aa (upated June,13th,2018)
Travis_Kernel 1.2: https://www.androidfilehost.com/?fid=890278863836293624 (upated June,16th,2018)
Combination Firmware G9600ZCU2ARC7: https://www.androidfilehost.com/?fid=674106145207493310 (frp or drk locked? than flash stock firmware after you factory reset) (Bootloader V2)
Regards,
Travis82
Click to expand...
Click to collapse
Is there a way to get wifi calling on this model (g9600) on the T-Mobile network without custom rom?
abecool56 said:
Is there a way to get wifi calling on this model (g9600) on the T-Mobile network without custom rom?
Click to expand...
Click to collapse
Flash T-Mobile CSC (?)
Vaughnn said:
Flash T-Mobile CSC (?)
Click to expand...
Click to collapse
That's all?
abecool56 said:
That's all?
Click to expand...
Click to collapse
I think so yeah
Problem with Secure Folder. It is not Signing in. It Reply me" Something went Wrong, if this problem persists, contact customer service." and samsung knox also not sign in. My Galaxy note 8 is not rooted. Please any solution.?
Was your Secure Folder working before this happened? Are you signed into your Samsung Account? As you need to sign into your Samsung Account before you can use the Secure Folder on your device
No Idea, because i brought in second hand but i signed in Samsung account. One thing more , there is not working Samsung health too.
arb_Dubai said:
No Idea, because i brought in second hand but i signed in Samsung account. One thing more , there is not working Samsung health too.
Click to expand...
Click to collapse
Looks like its rooted!
Go to Download mode and see if knox is 0x0 (NONROOT) or 0x1 (root). Also see if OEM LOCK IS ON or OFF.
Download Samsung phone info app from playstore to see if phone is rooted (knox tripped) as well.
If not sure post a screenshot of the download mode screen (the one that has the info on the top left corner and Download... on it, most of the time it's the second screen after the warning screen. )
Sceen Shot Of Downloading Mode Galaxy Note 8
As i Mentioned Below My Phone is not rooted,
Now what i need to do.?
Here are the details of downloading mode info!
CARRIER: SPR
RPMB fuse Blown
RPMB Provisioned
Current Binary: Samsung Official
FRP Lock: ON
KG Status: prenormal
Warranty void: 0×0
Qualcomm Secureboot: Enable
RP Swrev: B7(2,1,1,1,1) K5 S7
Secure Download: Enable
DID: 205EAE38F8F7
arb_Dubai said:
As i Mentioned Below My Phone is not rooted,
Now what i need to do.?
Here are the details of downloading mode info!
CARRIER: SPR
RPMB fuse Blown
RPMB Provisioned
Current Binary: Samsung Official
FRP Lock: ON
KG Status: prenormal
Warranty void: 0×0
Qualcomm Secureboot: Enable
RP Swrev: B7(2,1,1,1,1) K5 S7
Secure Download: Enable
DID: 205EAE38F8F7
Click to expand...
Click to collapse
What's your model? N950U/U1/W or N9500
Have you tried factory reset? Clearing both app data? Have you tried flashing the stock firmware again?
Why is KG Status is pernormal? Shouldn't it be normal? (Hopefully someone can answer that one. I have N950F. )
Curious you said second hand. Can you check to make sure your AP ,CP, and CSC has the same N950U (or whatever your model is) in them.
AP, N950U.....
CP N950U....
CSC N950U...
Normally can be found by *#1234# in dialer.
It's N950U
Yes, I have Done Factory Reset but no solution.
No Idea about KG Status.
AP: N9500
CP: N950U
CSC: N9500
arb_Dubai said:
It's N950U
Yes, I have Done Factory Reset but no solution.
No Idea about KG Status.
AP: N9500
CP: N950U
CSC: N9500
Click to expand...
Click to collapse
Return phone to seller!
Your phone is a mix and match of parts from N950U and N9500 you will have trouble flashing firmware and no OTA updates.
Thanks To All for Help
I'm newbie and have an have an old samsung s7 edge G935FXXU2DRC6 that is FRP locked and usb debugging is not enabled so I can't use TWRP. It is running Android 7.0 and I can't downgrade it to 6.0 using Odin because 6.0 is a U1 version not U2 version. How can I downgrade the phone, or is there another method to get past an FRP lock?
Any help is appreciated.
Thanks!
same here
There's is a zip posted somewhere on here that removes the frp lock but I'm not sure if it only works on snapdragon devices or if it would work just the same on the way now device you have
On the snapdragon device it has to be flashed in safestrap