Hello...im new here
Im with a xt1064 with bootloader unlocked, i can start on fastboot and flash a new rom with adb, the problem is:
It stucks on warning bootloader, i can't access recovery or any of the options on fastboot because it goes to warning bootloader message and still there until battery runs out.
Ps: i can flash a new rom without problem, but when the device reboot, it stills on warning. Is there any way to solve this? Thanks and sorry for the bad english.
ur able to into fastboot thats good try restoring to original stock firmwire and than if it goes succesful try to try the procedure again.. mayb u missed some step or so?
Sent from my Moto G 2014 using Tapatalk
Related
Good people, help:
Trying to install a mod from the camera of Nexus, rebooted, I see the icon lying android.
Tried to install xenonhd (4.2.2), reboot, and see the inscription on a black background:
Device is LOCKED. Status code: 0
Battery OK
Connect USB
Data Cable
failed to hab check for boot: 0x56
fastboot reason: boot failure
Please help me!
Sorry for bad English
Well you tried to flash a rom through stock recovery with a locked bootloader. Not the best decision. Go look at the tutorial in general.
Sent from my PACMAN MATRIX HD MAXX
iv-med said:
Good people, help:
Trying to install a mod from the camera of Nexus, rebooted, I see the icon lying android.
Tried to install xenonhd (4.2.2), reboot, and see the inscription on a black background:
Device is LOCKED. Status code: 0
Battery OK
Connect USB
Data Cable
failed to hab check for boot: 0x56
fastboot reason: boot failure
Please help me!
Sorry for bad English
Click to expand...
Click to collapse
Flash your stock rom with RSD....about all you can do.
Not true, but I'm not gonna write up a tutorial on how to dd back to the correct bootloader or make a stock bootloader in a flashable zip, etc. Not when the solution is plug phone into PC, Open RSD, click, click, clickity, click, reboot, and done.
//Unlock your bootloader and you won't have issues like this. If you don't wanna do that, ya gotta use the old roms, all the new ones are for unlocked devices.
skeevydude said:
Flash your stock rom with RSD....about all you can do.
Not true, but I'm not gonna write up a tutorial on how to dd back to the correct bootloader or make a stock bootloader in a flashable zip, etc. Not when the solution is plug phone into PC, Open RSD, click, click, clickity, click, reboot, and done.
//Unlock your bootloader and you won't have issues like this. If you don't wanna do that, ya gotta use the old roms, all the new ones are for unlocked devices.
Click to expand...
Click to collapse
i have the same problem but flashing back to stock rom with rsd will not work
I get a 1/23 partition type erro
and myth will now work due to fastboot, adb and attrib is not known as and internal or external command
skeevydude said:
Flash your stock rom with RSD....about all you can do.
Not true, but I'm not gonna write up a tutorial on how to dd back to the correct bootloader or make a stock bootloader in a flashable zip, etc. Not when the solution is plug phone into PC, Open RSD, click, click, clickity, click, reboot, and done.
//Unlock your bootloader and you won't have issues like this. If you don't wanna do that, ya gotta use the old roms, all the new ones are for unlocked devices.
Click to expand...
Click to collapse
Having this same problem when trying ota Kit Kat update from T-Mobile. The only way I can get back into 4.2.2 is to use Minimal Fastboot and give the command 'fastboot erase cache'. Even when I do this the phone never says if the cache erasure is complete but Minimal Fastboot says that it is. I have RSD lite installed on my CPU but can't seem to find a working link to the stock T-Mo images. Any help would be appreciated.
Just to add...if I attempt ota I get 'failed to hab check boot'. When trying to boot into recovery I get 'failed to hab check recovery'.
Edit: could I just unlock and root to solve this problem? If so, would someone point me to a different method than the Moto Toolkit found here? It doesn't recognize my moto even though all drivers and Motorola Device Manager are installed.
Sent from my XT1053 using Tapatalk
Ota KitKat update?
What phone do you have?
I have the T Mobile motomaker. Solved the problem with RSD Lite and factory Kit Kat images.
Sent from my Galaxy Nexus using Tapatalk
hi, i have a problem:
i tried to unlock my boot loader and instal a recovery (specifically the PhilZ Touch Advanced CWM Recovery), apparently the unlock did't work, i did not see that and i proceeded to install the recovery, the device reboot on the AP fastboot flash mode and says:
Device is LOCKED. Status Code 0
Battery OK
Connect USB
Data Cable
Fastboot Reason Flash Failure
now when always i press the button on, the device boot on the AP fastboot flash mode.
I can boot normally acceding to the boot menu pressing the 3 side buttons (+/- on) , but i want to solve that problem because i really want to unlock the boot loader
help please and thanks
(sorry for my english)
How did you try to unlock your bootloader?
Sent from my ATRIX HD using XDA Free mobile app
First off, would you kindly give us more information? We need to know what method you used to unlock your bootloader, your operating system, and your phone's original carrier to fully assist you. As it stands, you best bet is to ensure you have to correct drivers for adb and fastboot, then use RSDlite or Mythtools to flash the correct fastboot file to your phone.
I use the motopocalypse method for unlock the bootloader (but apparently didn't work), i have jelly bean and orignally is from nextel (mexican carrier) but a change it to telcel (also mexican)
Have you tried reflashing the stock jb Mexican sbf files? You can find them in the help and troubleshooting section.
there is no problem if i try to flash it when i have the bootloader locked?
You can flash stock roms even when bootloader is locked....
Sent from my ATRIX HD using XDA Free mobile app
can i flash it whit myth tools? (sorry for the noob question)
edit: i download the stock rom and extract the recovery, i flash it with myth tools and now everything is ok
Tthanks for the help
another problem
now i tried to unlock the boot loader but before the process start, in the console appears the message "TrustZone Write Failed -11"
exist a solution for that?
Hello Friends ! I tried to install CyanogenMod for Atrix HD, but I forgot to unlock the Bootloader and now my phone shows me the message FASTBOOT can not load the Boot. Someone can help me with this problem to retrieve my phone ? Thank you very much for the prompt help from everyone .
Reinitialize fastboot and rsdlite to stock and start over again with unlocking BL and rooting the phone by flashing a recovery.
Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer
I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://
I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks
How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...
I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks
Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????
I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution
Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..
koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:
How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.
my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.
How did you resolve this problem.
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.