Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Connect phone to computer.
Take off battery. And wait.
Is your pc can detect your device on bootloader mode?
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Or google "Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 (if you have the right kind of rom)"
And use that method.
Yes
nhmanas said:
Is your pc can detect your device on bootloader mode?
Click to expand...
Click to collapse
My pc sees the phone in QDLoader 9008 mode
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
I don't know what that is but flash stock rom again via fastboot
General Mobile 4G Dual cihazımdan Tapatalk kullanılarak gönderildi
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
I shall try but I pray it works. I am literally stuck in Android Development without my phone, Emulators aren't good enough
My dear sir you are a freaking genius
You my friend are a genius. I dont know where you acquired these files. It works like brand new. Thank you sir. Thank you thank you thank you!!!!!!!!!!!!!!!!
One Problem.
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
The phone wont turn on with battery in. It only turns on when I use usb without battery
yasteellutch said:
The phone wont turn on with battery in. It only turns on when I use usb without battery
Click to expand...
Click to collapse
Try flash stock rom via fastboot from here
http://builds.cyngn.com/factory/crackling/cm-12.1-YOG4PAS33J-crackling-signed-fastboot.zip
FindYanot said:
Open https://cloud.mail.ru/public/NExC/qxFwsmmmV/Wileyfox Swift/Recover SW/
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction https://mega.nz/#!YUFiXRwI!PlPCplXY31Rje57IfmWucTbRY6d56nSU6de46cQxIqU
Click to expand...
Click to collapse
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
dabotsonline said:
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
Click to expand...
Click to collapse
Would you mind posting those files, why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Sent from my SM-N920I using Tapatalk
hmsq said:
... why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Click to expand...
Click to collapse
I have those files as well, and get the same problem even when removing the battery.
hmsq said:
Would you mind posting those files...
Click to expand...
Click to collapse
Will do when I have a chance!
i tried to figure out how to enter into download or qualcomm mode 9008 by just removing the battery and connecting it to usb.
by this can we create a package for QFIL flashing or any other qualcomm tools just to debrick our device.?
kaustick said:
i tried to figure out how to enter into download or qualcomm mode 9008 by just removing the battery and connecting it to usb.
by this can we create a package for QFIL flashing or any other qualcomm tools just to debrick our device.?
Click to expand...
Click to collapse
Hello,
I think you haven't found this one: https://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
As for how to boot into EDL mode, you can check this: https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
Not sure it will work though...
Some phone requires you to press volume up or down and plug the battery and things like that. Not sure it will work either...
Good luck...
LG G2 Lite D295F
CHIPSET: MSM8812
I tried using BoardDiag and the phone passed all 3 tests. Then someone told me it didnt work for my chipset.
I tried to use a Loader.img to go to download mode. However it didnt work for me. My phone show 0% battery and do not start from SD at all. I'm afraid i used the wrong .img but i can't find the right one. The one I tried was from 4Pda LG L Fino page.
The brick was caused by a bad ROM installation. It shows as QLoader 9008, no partitions detected (still it passes the eMMC test from BoardDiag. ) When the bootable SD card is inside it. it shows as LGE Androidnet.
I would really appreciate any help with this problem. I don't think the phone has any hardware problem, because a friend of mine installed the same ROM and is with the same problem..
Help me!
Thiagopm26 said:
LG G2 Lite D295F
CHIPSET: MSM8812
I tried using BoardDiag and the phone passed all 3 tests. Then someone told me it didnt work for my chipset.
I tried to use a Loader.img to go to download mode. However it didnt work for me. My phone show 0% battery and do not start from SD at all. I'm afraid i used the wrong .img but i can't find the right one. The one I tried was from 4Pda LG L Fino page.
The brick was caused by a bad ROM installation. It shows as QLoader 9008, no partitions detected (still it passes the eMMC test from BoardDiag. ) When the bootable SD card is inside it. it shows as LGE Androidnet.
I would really appreciate any help with this problem. I don't think the phone has any hardware problem, because a friend of mine installed the same ROM and is with the same problem..
Click to expand...
Click to collapse
I have a LG G2 Lite D295F and it only stays in Qualcomm HS-USB QDLOADER 9008 (COM4).
I was able to flash him through QFIL successfully, but he does not care the same way.
In BoardDiag the same thing, he can flash in the rom, passes all tests (AP, EMMC, SDRAM) but does not turn on. Sometimes it comes back as QS-USB BULK, but it does not get even 20 seconds and it goes back to HS-USB QDLOADER 9008.
If I write the loader of it in img on an SD card, it appears that it is loading but not for a second it already disconnects and stays in it the whole time. Sometimes it mounts as removable (Qualcomm MMC Storage).
The battery is charged, but not the life signal. I can flash without the battery, however, without result.
can anybody help me?
After an update with fastboot I restart and do not turn on, no recovery no fastboot mode.
please help!!!
the pc recognizes it as Qualcomm HS-USB QDLoader 9008
First, you need to wait for the battery to drain completely.
Then you need to prepare an sd card and boot from it.
......
Hi Mates. Please help!!!
I have the same issue. Moto e4 plus xt1776 completely dead after trying stock rom installation. Even I tried with sd boot image but y failed. I'm not clear enough about battery affair, can anybody help? I mean can you be enough specific with some solution or some step by step. Please help me I can't believe my phone is dead
i have the same issue but with the xt1775 moddel, do not turn on, no recovery no fastboot mode nothing, and dont know how to start to make alive again, and the pc only said unknown usb device (device descriptor request error)
.
Will you ever try to download another version of the rom or are you insisting on trying to install the same rom?
My device is the XT1773 if I have a version of my rom that when I try to flash it it leaves my device "dead".
and when i try another version my phone starts
normally.
Remember, you need to have your device drivers installed correctly.
I have a hard bricked (i tried to flash it once because it was stuck in bootloop and i did it wrong) galaxy s 3 mini that shows up as a Qualcomm HS USB QDLoader 9008 (COM5) when i plug it into my computer, after some looking around i figured out this meant i could do emergency download mode on it through the Qualcomm product support tool (technically the QFIL portion). The issue is the firmware i get isnt in the format the program takes and im not sure how im supposed to do it because of this. It wants me to do things concerning firehose programmer, .elf, .mbn, and .hex but the firmware file i have is MD5. If theres somewhere in specific im meant to get the stock firmware from so its the correct format please let me know, i originally got mine from sfirmware.
xBabyxBluex said:
I have a hard bricked (i tried to flash it once because it was stuck in bootloop and i did it wrong) galaxy s 3 mini that shows up as a Qualcomm HS USB QDLoader 9008 (COM5) when i plug it into my computer, after some looking around i figured out this meant i could do emergency download mode on it through the Qualcomm product support tool (technically the QFIL portion). The issue is the firmware i get isnt in the format the program takes and im not sure how im supposed to do it because of this. It wants me to do things concerning firehose programmer, .elf, .mbn, and .hex but the firmware file i have is MD5. If theres somewhere in specific im meant to get the stock firmware from so its the correct format please let me know, i originally got mine from sfirmware.
Click to expand...
Click to collapse
I also have same issue