After an update with fastboot I restart and do not turn on, no recovery no fastboot mode.
please help!!!
the pc recognizes it as Qualcomm HS-USB QDLoader 9008
First, you need to wait for the battery to drain completely.
Then you need to prepare an sd card and boot from it.
......
Hi Mates. Please help!!!
I have the same issue. Moto e4 plus xt1776 completely dead after trying stock rom installation. Even I tried with sd boot image but y failed. I'm not clear enough about battery affair, can anybody help? I mean can you be enough specific with some solution or some step by step. Please help me I can't believe my phone is dead
i have the same issue but with the xt1775 moddel, do not turn on, no recovery no fastboot mode nothing, and dont know how to start to make alive again, and the pc only said unknown usb device (device descriptor request error)
.
Will you ever try to download another version of the rom or are you insisting on trying to install the same rom?
My device is the XT1773 if I have a version of my rom that when I try to flash it it leaves my device "dead".
and when i try another version my phone starts
normally.
Remember, you need to have your device drivers installed correctly.
Related
i try to flash my device but fast boot recovery bricked now i cant open droid boot or android Os. when i try to power on device an USB logo show in the screen and device powered off in 1 second. in my device connect to computer via USB cable ,USB logo remain in screen for a few minutes. fastboot and adb cant find my device. any one can help me?? tanks
Sorry for the Long wait
I hope u receive this before going off to buy a new tablet.Or did u send it to Asus warranty and did they give u a new one for free.(Plzz reply and tell me. Also I found this procudure in how to get adb and fastboot to work again. Go to this fourm http://forum.xda-developers.com/memo-pad-7/general/howto-unbrick-hardbricked-memo-pad-t3105945 and follow the instrucftions. it works with the me170cx well but with other versions not so much. i'm going to try this and hopefully this works:laugh:
Does anyone know how to unlock me170c bootloader and have custom recovery installed?
Bricked Asus Me70cx
I am having the exact same problem. Tried using Intel flash tool and keep getting windriver error timeout. I have tried starting flash before usb screen comes and waiting for screen to load. I have loaded all usb drivers like other post state and still can't get tablet working. Please someone help!
Hello,
few days ago i unlocked bootloader and installed twrp on my l90 d405n. Unfortunetly, something went wrong and now my phone is fully bricked. Windows see the phone only as 60mb disc with two folders, on phone screen is still black.
I tried this: (remove space)
ht tp://android forums.com /threads/guide-unbrick-lg-l70-no-download-mode-no-recovery-mode-no-fastboot.893311/
but main problem is that idk what version of software i've got (10a, 10b, 20b, etc.), only remember it was rooted android 5.0.2. I tried few aboot's, but effect is still the same - nothing happens.
it may be due to bad recovery version o rbad aboot? What can i do?
Plz help and sry for bad English
check private
TreQUS said:
check private
Click to expand...
Click to collapse
So did you find out!?!?!? I need help, I have the same problem, I am missing loader.img for D405n!
same problem
almost same problem, no download mode or anything else just as same as first reply when connecting to pc there are two folders. pls fully explain.
I have the exact problemm as well.. EXPLAIN!!
I had the same problem, but then i tried the guide with replaceing aboot boot recovery files and now my pc doesnt even see the 60mb disk. When i plug my phone to charger or pc without battery in it shows that its missing but when i put t back in nothing happens the screen just stays balack or shows 0% for a sec. When i connect it to pc nothing happens and when i hold the power button the sound of conecting a device is playd and after a sec the disconection sound plays.
Is there any hope for my device??
come on guys we need a fix please help
If your computer still recognizes it, you may be in a soft-brick. Try flashing your stock ROM onto your LG L70 and wipe caches.
Sent from my LG-D415
Hello
Have you found the solution? I have same problem
Please guys ! this happens to now...me... anyone can help me whit the solution? I have no phone now :/
Is there a TOT File for LG L90 D405n?I cant find it.Mobile phone of my 13yold son is hard brick now.Device manager shows as Qualcomm HS-USB QDLoader 9008 .
Can someone help me please? Im willing to donate him if the device unbrick.
Im trying and looking for solution 3 days now but no result.
Finaly i unbrick the device
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
cyrusct82 said:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
Click to expand...
Click to collapse
u can download updates using adb sideload command and thats what i did
HS-USB Diagnostics 9008 ? In windows device manager?
What do you see in Windows device manager?
Do you see Fastboot, or HS-USB Diagnostics 9008 ?
Did you unlock_critical?
If you see HS-USB Diagnostics 9008, then your bootloader have to be bind to one slot.
Solution: Follow steps of LG qualcomm. You have a hard way a head you, because there or no ready model-files yet that "someone" extracted from our firmware-binary-files.
https://forum.xda-developers.com/verizon-lg-g3/general/fix-unbrick-hard-bricked-lg-g3-vs985-t3467067
You need drivers for Qualcomm installed on windows Qualcomm QDLoader_HS-USB_Driver 32 and 64bit Link is in the link above
Follow internet with these keywords when you search "unbrick HS-USB Diagnostics 9008 " on google. Also there is defferense between in partiotions mountspoint because of different GB-size 64GB 128GB
Don't follow this unless you know your thing: Warning! https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319
This is my partiotion that I flashed and theyr size, size isn't important information but when flashing through Qualcom there is need for specifik hex-code, start-sector to end-block for each partition in the EMMC (phone-harddrive)
PHP:
274*432 abl.img
405*504 bluetooth.img
53*161*984 boot.img
8*388*608 cda.img
225*280 cmnlib.img
294*912 cmnlib64.img
61*440 devcfg.img
16*777*216 dsp.img
41*943*040 hidden.img
262*144 hyp.img
380*928 keymaster.img
17*809*408 mdtp.img
1*081*344 mdtpsecapp.img
114*331*648 modem.img
2*326*528 nvdef.img
53*248 pmic.img
237*568 rpm.img
11*079*680 splash.img
3*758*096*384 system.img
45*056 systeminfo.img
1*945*600 tz.img
3*006*464 xbl.img
22 File(s) 4*032*188*416 bytes
I am almost in the same situation, maybe yours is easier, dependes on the details we don't know exactly, but this Qualcomm Com port is the last resort. I trouble when I did flash everything when I dumped/extracted the firmware, maybe the software-hack-tools I used where not perfect, Or me dum for flashing every img and
Now my fastboot don't work with a black dead phone. I working it out. And will share the solution by time.
kurdi9132 said:
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
Click to expand...
Click to collapse
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Shabbirkt said:
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Click to expand...
Click to collapse
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Dr.Csoo said:
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Click to expand...
Click to collapse
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Shabbirkt said:
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Click to expand...
Click to collapse
Do you know if they can or not notice if device was hard bricked by software mistakes?
@kurdi9132
Plug your phone to your computer via. USB, and leave it for 15-16mins, you should hear a notification sound, then check Device Manager to see if Qualcomm 9008 comes up.
Please let us know!
well... doing some stuff with t-virus and my curiosity led to situation like what is mentioned here. everything was fine untill I pressed reboot>edl from recovery. Phone went down and went down deep!
PC makes sound when I connect the phone. but nothing more than that.
Device manager shows HS-USB Diagnostics 9008.
It looks like that the phone does not even charge. I cant feel any warming while connected to power adapter.
So...?
hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:
anderssx1 said:
hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:
Click to expand...
Click to collapse
Likely you have too much power coming from your usb ports, use a usb hub such as this: https://www.amazon.com/BYEASY-Porta...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Now try Mi Flash again, make sure that the lock bootloader (which is checked by default) is unchecked.
Now it should work, be sure that you are using a fastboot rom and not a recovery rom. ( a recovery rom will not work)
Make sure that it is a fast boot for your device : If you have a global device here is a link with quite a few fastboot roms :https://c.mi.com/thread-1899815-1-0.html
If you still have trouble let me know, and tell me specifically how you arrived at your brick, I helped someone with this exact issue a couple of weeks ago, and I was going to link you to that thread. But i can't find it at the moment.
I get the same error " cannot receive hello packet" with hub USB.
MY xioami mi 8 is global version, i unlock the bootloader and make a downgrade with twrp to a older version of stable rom, and when the phone start ,its all ok and login my mi account, and the phone goes down and never more boot. Always in the pc i get qualcom port (edl mode) . Sorry for my bad english.:crying:
I think i need account with EDL authorization to flash any rom. And i can't found anyone to save me..
Try https://forum.xda-developers.com/mi-8/how-to/unbrick-mi8-edl-authorized-account-t3896677
Thank you .. i try this metod but no success
About s-unlock .. anyone knows if the service is online?
anderssx1 said:
About s-unlock .. anyone knows if the service is online?
Click to expand...
Click to collapse
Maybe try this site : MOD EDIT: link removed
I dont have his name but one of the techs from this site is a frequent XDA user and supposedly legit.
In the end there is a risk of losing $12. Seems to be worth $12 to me.
I send message to this brother , and it's 40 dollars .. i'm thinking about
thanks for reply