Hi,
i've got a rooted ivy with unlocked bootloader. Now the phone shows me that there is an update.
Can i update without any fear?
Or do i have to root the new kernel like i did with the old one (i only have rooted kernel with drm-fix, ric disabled an TWRP)
Streetrayzer said:
Hi,
i've got a rooted ivy with unlocked bootloader. Now the phone shows me that there is an update.
Can i update without any fear?
Or do i have to root the new kernel like i did with the old one (i only have rooted kernel with drm-fix, ric disabled an TWRP)
Click to expand...
Click to collapse
Hi Streetrayzer:
I just try to update my phone but got an error, however I unroot my z3+ and try again with the same result, finally y flash the last firmware 32.2.A.0.253 it's nice, but i don't have root again do you find some kernel to root in this firmware? thank you!
I've found a solution in the Z5 forum, will try it a soon as possible....
http://forum.xda-developers.com/showpost.php?p=67712881&postcount=9
By the way, i've seen that Trilliard uses the old .244 kernel in his SuperSlimRom v1.2.
http://forum.xda-developers.com/xperia-z4/development/rom-superslim-stock224v1-0-t3413919
Streetrayzer said:
I've found a solution in the Z5 forum, will try it a soon as possible....
http://forum.xda-developers.com/showpost.php?p=67712881&postcount=9
By the way, i've seen that Trilliard uses the old .244 kernel in his SuperSlimRom v1.2.
http://forum.xda-developers.com/xperia-z4/development/rom-superslim-stock224v1-0-t3413919
Click to expand...
Click to collapse
Let me try it, thanks again
By the way, i've seen that Trilliard uses the old .244 kernel in his SuperSlimRom v1.2.
http://forum.xda-developers.com/xperia-z4/development/rom-superslim-stock224v1-0-t3413919
Click to expand...
Click to collapse
Updated to .253 in v1.3
Related
I know TiMiN8R made a Stock Rooted Deodexed rom for everyone but some people asked for just a Stock rom that wasn't deodexed so that's what I have made here. This is a stock firmware with only root added. Please note the kernel and CWM are not packed into this rom (though the reboot fix is) Please read the note at the bottom regarding bootloop issues.
Here you go: http://d-h.st/tAn
Installation for Unlocked Bootloader
* Make a backup - Always backup just in case you ****up (Data backed up through Sony's Backup & Restore app can be restored without issue)
* Flash any kernel you want to use that has built in recovery.
* Enter recovery
* Factory reset
* Flash rom.
Installation for Locked Bootloader
* Make a backup - Always backup just in case you ****up (Data backed up through Sony's Backup & Restore app can be restored without issue)
* Use flashtool to flash any generic ftf that can be rooted using Bin4ry's method. If you are already on a LT30 ICS/JB firmware that is rooted you can ignore this step.
* Root using Bin4ry's method.
* Install CWM for Xperia T Locked bootloaders
* Enter recovery, factory reset and flash the ROM.
* Flash the stock ftf (same version as the rom used ftf available in my signature) in Flashtool but uncheck Wipe Data, Wipe Cache, Wipe app Log. Also exclude everything except for Kernel. (This is needed to update the Kernel to the latest stock version otherwise you may get a bootloop.)
**Keep LTE**
If you have a LT30at or LT30a and would like LTE with the LT30p rom then once you have flashed the above go back into Flashtool and flash the latest LT30at or LT30a ftf. UNCHECK Wipe Data, Wipe Cache, Wipe app Log, and exclude everything EXCEPT for baseband. This should put LTE support back on the phone but keep the LT30p system.
*If you started on a rooted LT30at or LT30a firmware and flashed this rom straight from that you do not have to reflash the baseband as it is not overwritten by this rom.
You will need to reinstall CWM after flashing this rom if you want it. CWM is not baked into this rom.
**NOTE**
If going from ICS to JB you will get a bootloop after flashing and rebooting phone. Hold the power and Volume up button until the phone vibrates three times (simulated pulling of battery for non-removable batteries). You can then flash the JB kernel through flashtools to fix the bootloop.
You can also flash kernel from cwm.
http://d-h.st/wye
It's just a stock kernel with no cwm. It's especially for locked bootloader but unlocked bootloaders can use it as well.
Just use that link and you will find it
Sent from my phone using XDA Premium
Thanks a lot, was waiting for that !
Edit : I already flashed TiMiN8R Deodexed JB ROM, so I'll be fine if I only flash your rom over it, Right ?
babylonbwoy said:
Thanks a lot, was waiting for that !
Edit : I already flashed TiMiN8R Deodexed JB ROM, so I'll be fine if I only flash your rom over it, Right ?
Click to expand...
Click to collapse
Yep
Hello Spectre51.
So, if I flash this ROM, it will use the Kernel I used to get into Recovery?
I'm coming from HTC devices, so Sony is new to me...
I would prefer to keep the stock kernel for now. In EMMA I do not see the option only to flash a kernel? I see the ICS stock .195 rom and then the JB Alpha build. Is that the .489 version?
I'm currently on the .489... Like the ROM but only need root on it.
Thx,
j
Download flashtool from the dev section. You can flash kernel s using that
Sent from my LT30p using xda app-developers app
Deodexed or Odexed
I flashed your rom last night. Flased overon TiMi8R. Still, I have a lingering question. Is Odexed faster than Deodexed?
babylonbwoy said:
Thanks a lot, was waiting for that !
Edit : I already flashed TiMiN8R Deodexed JB ROM, so I'll be fine if I only flash your rom over it, Right ?
Click to expand...
Click to collapse
inteltecra1700 said:
I flashed your rom last night. Flased overon TiMi8R. Still, I have a lingering question. Is Odexed faster than Deodexed?
Click to expand...
Click to collapse
5 second google search
http://www.redmondpie.com/odexed-vs-deodexed-the-difference-between-the-two-android-roms-explained/
Basically deodexed roms are easier to modify. Odexed roms boot up quicker (On first boot only)
Spectre51 said:
Yep
Click to expand...
Click to collapse
HI, i flashed your rom and when i start up i see the xperia logo flashing on and off PLEASE HELP ME !!!
Mardinio said:
HI, i flashed your rom and when i start up i see the xperia logo flashing on and off PLEASE HELP ME !!!
Click to expand...
Click to collapse
There is some warnings at the end of the post about bootloop if you move from ICS. Have you read it. Perhaps you need to flash a JB kernel to solve it.
Hi, any chance to get the same flashable .140 zip ? Tried OTA update to keep root but it didn't install...
forest1971 said:
There is some warnings at the end of the post about bootloop if you move from ICS. Have you read it. Perhaps you need to flash a JB kernel to solve it.
Click to expand...
Click to collapse
I was on JB! Will using DoomKernel maybe work better?
EDIT: It worked, but now the camera isnt working -_- any tips? it says memory error. I had this error before too by the way. I also cant seem to delete songs or stuff..
Mardinio said:
I was on JB! Will using DoomKernel maybe work better?
EDIT: It worked, but now the camera isnt working -_- any tips? it says memory error. I had this error before too by the way. I also cant seem to delete songs or stuff..
Click to expand...
Click to collapse
Back up your sd card, then delete/format it in storage settings or format it in cmw, then restore your data
babylonbwoy said:
Hi, any chance to get the same flashable .140 zip ? Tried OTA update to keep root but it didn't install...
Click to expand...
Click to collapse
I'll see if I can make one sometime this week.
Sent from my Sony Xperia™ Z
babylonbwoy said:
Hi, any chance to get the same flashable .140 zip ? Tried OTA update to keep root but it didn't install...
Click to expand...
Click to collapse
The firmware I am using only has .140 as a small ota update not available through sus. Is there a specific region ftf you want me to make a prerooted version of?
Sent from my Sony Xperia™ Z
Hi, thanks for the offert, don't waist your time I already updated it and the root methode with screen display still works on this firmware.
Sony released open source zip for XT fw number .141 did you heard about ? Country specific or little bug fix ?
open-source-archive-for-build-9-1-a-1-141/
babylonbwoy said:
Hi, thanks for the offert, don't waist your time I already updated it and the root methode with screen display still works on this firmware.
Sony released open source zip for XT fw number .141 did you heard about ? Country specific or little bug fix ?
open-source-archive-for-build-9-1-a-1-141/
Click to expand...
Click to collapse
Hard to say. Could just be a regional bug fix.
Sent from my Sony Xperia™ Z
Spectre51 said:
The firmware I am using only has .140 as a small ota update not available through sus. Is there a specific region ftf you want me to make a prerooted version of?
Sent from my Sony Xperia™ Z
Click to expand...
Click to collapse
Could you make a prerooted US ATT ftf? I want to test and compare a couple things. I just don't have time to deodex and root the stock ftf that I have because of my job.
Sent from my LT30p using xda premium
jonchance_84 said:
Could you make a prerooted US ATT ftf? I want to test and compare a couple things. I just don't have time to deodex and root the stock ftf that I have because of my job.
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Yeah I can do that. prerooted and deodexed right? I'll try to get that done tonight.
Sent from my Sony Xperia™ Z
jonchance_84 said:
Could you make a prerooted US ATT ftf? I want to test and compare a couple things. I just don't have time to deodex and root the stock ftf that I have because of my job.
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Here you go: http://d-h.st/fqd Stock Rooted & DeOdexed AT&T firmware. Make sure you flash the kernel after if coming from ICS or another firmware if you experience issues.
Hello guys, i have been playing around with the new offical 4.3 rom, I have found a little way for now to get rooted, take a look below...
***Disclaimer, I am not responsible if you blow up your phone, loose data, or do anything silly, I am merely trying to help, and point people in the right direction***
Okay it's a long winded approach to get rooted, but i guess it will have to do for the time being... Until a new updated rooting tool is available.
Here we go then , you will need these things:
SuperSU Install zip
Doomkernel v08 kernel.elf file
Stock Sony 4.3 kernel, attached to this post.
UBL (Unlocked Boot Loader!)
A brain and common sense.
Lets go then, first install the stock android 4.3 FTF....
Once this is done disconnect your phone, put it into fastboot mode and install the Doomkernel. Now upon boot, go into recovery, and install the SuperSU zip normally.
Once this is done, power off your phone (Holding down the power and volume up)
Go into Fastboot mode again, and install the provided stock Sony 4.3 Kernel.
Unplug your phone, boot it, and there you go, rooted stock android 4.3.
If you have any questions ask, no question is too stupid, or PM me and i'll help you best I can.
Reserved for more information, FaQ ETC...
I guess its only for unlocked bootloaders, because after flashing custom kernel on locked BL xperia, it won't boot.
needmoney said:
I guess its only for unlocked bootloaders, because after flashing custom kernel on locked BL xperia, it won't boot.
Click to expand...
Click to collapse
Indeed.!! the writer of this thread should mention this..
Yeah it's only for UBLs Guys
who has the doomkernelv8.elf file for me
Thread Amended, Also I have attached the doomkernel elf to the main post.
russell664 said:
Thread Amended, Also I have attached the doomkernel elf to the main post.
Click to expand...
Click to collapse
sorry i only see the stock kernel as atachement
Cant we just flash everything except kernel on leaked 4.3 bro?
Sent from my LT30p using XDA Premium 4 mobile app
josephnero said:
Cant we just flash everything except kernel on leaked 4.3 bro?
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i think yes because the kernel its the same and i am using the leakead kernel with recovery in final version
quintas84 said:
i think yes because the kernel its the same and i am using the leakead kernel with recovery in final version
Click to expand...
Click to collapse
have you noticed any worth while change compared to leaked rom?
josephnero said:
have you noticed any worth while change compared to leaked rom?
Click to expand...
Click to collapse
really no big diferences ithink only some stability changes but i think its better install....
quintas84 said:
really no big diferences ithink only some stability changes but i think its better install....
Click to expand...
Click to collapse
Thanks mate.i want to relock my bootloader later so i'm waiting for a working recovery
Sent from my LT30p using XDA Premium 4 mobile app
Can this method use for xperia v?
If yes,
I can't find Doomkernel v08 kernel for xperia v
can I use v7
How can i root with locked bootloader? Can i use flashtool to root 4.3?
isko95 said:
How can i root with locked bootloader? Can i use flashtool to root 4.3?
Click to expand...
Click to collapse
No this method is only for Unlocked bootloader.
V7 should work just fine, all we are after is the recovery to flash the SuperSU
Thanks a lot it's working
Never did before on sony and the biggest problem for me was entering in recovery, so just in case, to enter recovery, when LED is pink press {vol up for 2012 models} or {vol down for 2011 models}
(used 1268-6904 Generic Nordic)
russell664 said:
V7 should work just fine, all we are after is the recovery to flash the SuperSU
Click to expand...
Click to collapse
I can have root with that? With locked bootloader?
HELP ME!
HELP ME!
I tried this method on my Xperia V. I flashed the kernel then accidentally booted into android. Soft bricked. So I flashed back Sony kernel.
Working now but now there is something wrong with the screen.
I'm not sure what's wrong but it looks like the gamma is too high. I'll post a picture.
So here's my request
If it's not much of a trouble, whoever managed to root their locked bootloader 4.3 and with experiences in making flashable zip can you guys like make a rooted 4.3 and make it available to flash it from 4.1.2? Later after flashing if needed, flash the 266 kernel through flashtool
Pure stock 4.3 from CE region would be nice (and deodexed as a bonus)
I don't know if this is possible tho
If it's not then tell me. I'll remove this thread immediately as it can cause annoyance :silly:
Patience guys the update has just rolled out. Let the developers work and give them some time!
Vanschtezla said:
So here's my request
If it's not much of a trouble, whoever managed to root their locked bootloader 4.3 and with experiences in making flashable zip can you guys like make a rooted 4.3 and make it available to flash it from 4.1.2? Later after flashing if needed, flash the 266 kernel through flashtool
Pure stock 4.3 from CE region would be nice (and deodexed as a bonus)
I don't know if this is possible tho
If it's not then tell me. I'll remove this thread immediately as it can cause annoyance :silly:
Click to expand...
Click to collapse
If you look for it, there is a 4.3 de-odexed available. you can flash it and then flash SuperSU zip... then flash 4.3 kernel ftf
I am on locked rooted 4.3.
mrjraider said:
Patience guys the update has just rolled out. Let the developers work and give them some time!
Click to expand...
Click to collapse
Ahaha sorry. Was just giving out idea since I think it's just another possible way to get rooted. Sorry for any inconvenience really :silly:
neXus PRIME said:
If you look for it, there is a 4.3 de-odexed available. you can flash it and then flash SuperSU zip... then flash 4.3 kernel ftf
I am on locked rooted 4.3.
Click to expand...
Click to collapse
You mean PuReStOcKdEoDeXeD 4.3 v2 rom? I've seen it but I just wanted a pure stock rom from CE. Nothing changed. Just rooted with an updated SU and deodexed. Nothing more. He changed the build number to 'PuReStOcKdEoDeXeD'. Not that it's wrong and dipesh1502 had done a great job. It's just me. It just that doesn't feel right
Or do you mean other rom I didn't notice?
Oh and not to mention jancsessz method didn't work for me. Think I did something wrong :silly: the SU ask me to re-root it and pretty busy so I don't have time to do it all over again. If someone just make one that'll be great :good:
hey, am not aNOOB but am xperia NOOB
rooting sony phones looking to be harder than sammy's!
any ways, there are suggestions to root FW 133 by flashing a rootable firmware then root after that flashing!
does it lag? or get heated by this process? or is there any better ways to root?
eraser0 said:
hey, am not aNOOB but am xperia NOOB
rooting sony phones looking to be harder than sammy's!
any ways, there are suggestions to root FW 133 by flashing a rootable firmware then root after that flashing!
does it lag? or get heated by this process? or is there any better ways to root?
Click to expand...
Click to collapse
Rooting an Xperia phone has never been as easy as now. I recommend using Easyroot Tool in Cross Development Section. I rooted my phone in 2 minutes and then installed dual recovery. Rooting itself doesn't cause any lag or heat issues, it depends on the Rom you install. Anyway it's very easy and as for Roms I'm using iHackers 4.1
FahmyAbou said:
Rooting an Xperia phone has never been as easy as now. I recommend using Easyroot Tool in Cross Development Section. I rooted my phone in 2 minutes and then installed dual recovery. Rooting itself doesn't cause any lag or heat issues, it depends on the Rom you install. Anyway it's very easy and as for Roms I'm using iHackers 4.1
Click to expand...
Click to collapse
I've dont it and deodexed and free'd
FahmyAbou said:
Rooting an Xperia phone has never been as easy as now. I recommend using Easyroot Tool in Cross Development Section. I rooted my phone in 2 minutes and then installed dual recovery. Rooting itself doesn't cause any lag or heat issues, it depends on the Rom you install. Anyway it's very easy and as for Roms I'm using iHackers 4.1
Click to expand...
Click to collapse
can easy root v12 root C6903 14.4.A.0.133?
thegios said:
can easy root v12 root C6903 14.4.A.0.133?
Click to expand...
Click to collapse
The Newroot method worked for me. Check this out!
http://forum.xda-developers.com/xperia-z1/development/newroot-z1-t2807092
binoyw said:
The Newroot method worked for me. Check this out!
http://forum.xda-developers.com/xperia-z1/development/newroot-z1-t2807092
Click to expand...
Click to collapse
Newroot work with all kitkat firmwares but doesn't work with latest kitkat .133 firmware
thegios said:
Newroot work with all kitkat firmwares but doesn't work with latest kitkat .133 firmware
Click to expand...
Click to collapse
It does if you flash the .108 kernel, then root, then flash the 133 kernel back.
As does @[NUT]'s method to install dual recovery on a non rooted device
Rooted N6 stock rom 6.0
I flashed the newest update of Franco Kernel only meant for 6.0.1 and now im in a boot loop.
please help!!! aaahhhhhh
Thanks in advance
nexus1ace said:
Rooted N6 stock rom 6.0
I flashed the newest update of Franco Kernel only meant for 6.0.1 and now im in a boot loop.
please help!!! aaahhhhhh
Thanks in advance
Click to expand...
Click to collapse
reflash your rom or push a 6.o kernel to your phone and flash it.
before you make anymore mods to your phone, you want to make a backup within twrp recovery, in case you end up like this. then you can always restore it.
nexus1ace said:
Rooted N6 stock rom 6.0
I flashed the newest update of Franco Kernel only meant for 6.0.1 and now im in a boot loop.
please help!!! aaahhhhhh
Thanks in advance
Click to expand...
Click to collapse
Its important to first flash the kernel and then the latest superSU.zip from here http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
gee2012 said:
Its important to first flash the kernel and then the latest superSU.zip from here http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
Click to expand...
Click to collapse
you do realize that when flashing kernels, that you dont have to reflash supersu(if you already have root)? :silly:
simms22 said:
you do realize that when flashing kernels, that you dont have to reflash supersu(if you already have root)? :silly:
Click to expand...
Click to collapse
I was (am) under the impression that after every kernel flash superSU had to be flashed too At least with 6.0.1.
gee2012 said:
I was (am) under the impression that after every kernel flash superSU had to be flashed too At least with 6.0.1.
Click to expand...
Click to collapse
well, im not on 6.0.1, im on 6.0, and i flashed a kernel yesterday without flashing supersu, and i still have root. in theory, on 6.0.1, it should still be the same, as your supersu doesnt get removed when you flash another kernel. but, im not perfect, so i guess i could be wrong when it comes to 6.0.1 :angel:
simms22 said:
well, im not on 6.0.1, im on 6.0, and i flashed a kernel yesterday without flashing supersu, and i still have root. in theory, on 6.0.1, it should still be the same, as your supersu doesnt get removed when you flash another kernel. but, im not perfect, so i guess i could be wrong when it comes to 6.0.1 :angel:
Click to expand...
Click to collapse
Thought i read it on Chainfire`s systemless root page, will look into it and post it here
BTW i could have missread.
Answered by @franciscofranco:
Quote:
Originally Posted by j4rp0
Should i flash the supersu zip always after a franco kernel update? Even if coming from systemless root?
Enviado desde mi Nexus 6 mediante Tapatalk
Yup.
gee2012 said:
Thought i read it on Chainfire`s systemless root page, will look into it and post it here
BTW i could have missread.
Click to expand...
Click to collapse
i havent even investigated any new info. i guess if there is something new, ill figure it out when the time comes.
maybe its about his new systemless root only? i still do it the old fashioned way.