Delte this, please.
http://forum.xda-developers.com/att...sion-6-0-1-t3419016/post67758643#post67758643
Alguien que ya haya podido actualizar android 6.0
buenos días amigos del grupo alguien que ya haya conseguido el link de descarga de android 6.0 para este modelo g900a que nos haga el favor de compartirlo de ante mano gracias !!:angel::good:
ronalgogare said:
buenos días amigos del grupo alguien que ya haya conseguido el link de descarga de android 6.0 para este modelo g900a que nos haga el favor de compartirlo de ante mano gracias !!:angel::good:
Click to expand...
Click to collapse
Sí mi amigo, esperar a que el espejo :good:
yo estoy en el OC4 como llego a PA2 y como llegar al MARSHMALLOW
iondelox said:
yo estoy en el OC4 como llego a PA2 y como llegar al MARSHMALLOW
Click to expand...
Click to collapse
ir aquí http://forum.xda-developers.com/att-galaxy-s5/general/galaxy-s5-android-version-6-0-1-t3419016
PA2 instalar en Odin
descarga de Marshmallow en la tarjeta SD en el teléfono
apague el teléfono
VOL UP + HOME + POWER
instalación de externo
I have PA2 installed and this is not working.
I keep on getting errors on the installation just before it formats and wipes.
Curious Chloride said:
I have PA2 installed and this is not working.
I keep on getting errors on the installation just before it formats and wipes.
Click to expand...
Click to collapse
Did you load BL when flashing pa2?
Sent from my SAMSUNG-SM-G900A using Tapatalk
Curious Chloride said:
I have PA2 installed and this is not working.
I keep on getting errors on the installation just before it formats and wipes.
Click to expand...
Click to collapse
You have to flash bl as well...
Then flash the rom if you're getting errors then most probably the file is corrupt
I am on marshmallow right now
morphfxf said:
You have to flash bl as well...
Then flash the rom if you're getting errors then most probably the file is corrupt
I am on marshmallow right now
Click to expand...
Click to collapse
I just checked the ROM I downloaded. It appears it only downloaded 0.97GB of the file, and the full size should be around 1.07GB.
Where do I find the boot loader? I was already on PA2 so I assume I didn't have to do anything else other than load up the Marshmallow ROM.
This is was a while back but I believe I went from OI5 to PA2 through stock recovery.
Curious Chloride said:
I just checked the ROM I downloaded. It appears it only downloaded 0.97GB of the file, and the full size should be around 1.07GB.
Where do I find the boot loader? I was already on PA2 so I assume I didn't have to do anything else other than load up the Marshmallow ROM.
This is was a while back but I believe I went from OI5 to PA2 through stock recovery.
Click to expand...
Click to collapse
yeah you only need to flash the boot loader if you're upgrading or downgrading to PA2, otherwise its just the .bin file.
this is how I did mine since i was on PA4,
flashed PA2 including bootloader,
immediately went into recovery and flashed PE3 from SD card.
what size is the file supposed to be? mine is 0.97GB but is someone getting 1.07GB?
sensei22 said:
what size is the file supposed to be? mine is 0.97GB but is someone getting 1.07GB?
Click to expand...
Click to collapse
Finally got it to work. Yes, the actual file is 0.97GB.
I had to download the firmware on my phone, transfer it onto my memory card, transfer it onto my computer, change the ".bin" ending to ".zip", transfer it back onto the card, and select it in stock recovery.
Curious Chloride said:
Finally got it to work. Yes, the actual file is 0.97GB.
I had to download the firmware on my phone, transfer it onto my memory card, transfer it onto my computer, change the ".bin" ending to ".zip", transfer it back onto the card, and select it in stock recovery.
Click to expand...
Click to collapse
is up to date!
I'm currently on stock 5.1.1 Baseband Version G900AUCU4CPA1
Can I apply this update or do I need to be on PA2?
Related
Hi, I have a GT-I8190 and from one day to another not grab wifi. I tried to update and upgrade KIES was performed but stick with boot loop. I have flashed several images of the box but still even with the same problem. I can enter Download mode but not recovery or stock or CWM or TWRP.
HELP!
Sorry for my bad English
-------------------------------------------------------------------------------------------------------
Hola, tengo un GT-I8190 y de un dia para otro no agarro wifi. Lo intente actualizar por KIES y se realizo la actualizacion pero quedo con boot loop. He flashed varias imagenes de fabrica pero sigue aun con el mismo problema. Puedo entrar a Download mode pero no a recovery ni stock ni TWRP o CWM.
AYUDA!
Perdon por mi mal ingles
AlbertoJOG said:
Hi, I have a GT-I8190 and from one day to another not grab wifi. I tried to update and upgrade KIES was performed but stick with boot loop. I have flashed several images of the box but still even with the same problem. I can enter Download mode but not recovery or stock or CWM or TWRP.
HELP!
Sorry for my bad English
-------------------------------------------------------------------------------------------------------
Hola, tengo un GT-I8190 y de un dia para otro no agarro wifi. Lo intente actualizar por KIES y se realizo la actualizacion pero quedo con boot loop. He flashed varias imagenes de fabrica pero sigue aun con el mismo problema. Puedo entrar a Download mode pero no a recovery ni stock ni TWRP o CWM.
AYUDA!
Perdon por mi mal ingles
Click to expand...
Click to collapse
flash a completely stock firmware via odin
Ahmed.ragab said:
flash a completely stock firmware via odin
Click to expand...
Click to collapse
I've done more than 10 times
AlbertoJOG said:
I've done more than 10 times
Click to expand...
Click to collapse
flash the oldest you can get for your country then
search www.sammobile.com or here http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
AlbertoJOG said:
I've done more than 10 times
Click to expand...
Click to collapse
Screw that, just return it to your seller. The contract of sales lies with the seller, not for you to send it to the manufacturer. I fully drained the battery of my bricked S3 mini before sending it back to Amazon (my seller) and they never found out it was rooted! This is when the download mode of a bricked S3 mini comes to use
Extracted from htc_vivid_att_RUU_3.26.502.56_R23_US, untouched and unmodified. Flashable from bootloader off sdcard. As usual, it will wipe everything. I don't think anyone has uploaded this before, so i'll leave this here.
PH39IMG.zip - 437.48 MB
Remember to check md5sum before flashing
npz said:
Extracted from htc_vivid_att_RUU_3.26.502.56_R23_US, untouched and unmodified. Flashable from bootloader off sdcard. As usual, it will wipe everything. I don't think anyone has uploaded this before, so i'll leave this here.
PH39IMG.zip - 437.48 MB
Remember to check md5sum before flashing
Click to expand...
Click to collapse
Many have... But the download links have all expired...
Thanks...
Also... Could you edit your thread title to make it easier to search...
Sent from my Vivid 4G using Tapatalk
duda
hola, quisiera saber si puedes ayudarme, mi vivid no reinicio luego de cambiar el estilo de letra con la app font installer. y mi duda es que si puedo flashear este archivo para resolver mi problema?
mi vivid esta desbloqueado y era root con ice cream ... gracias
Hi all!
I wanna update my p7-L12 EMUI 2.3 to EMUI 3.0.. and i don't see where is this UPDATE.APP in this page emui .com /plugin.php?id=hwdownload
Only i found L00, L05-07, L09 but not L12...
Anyone know about this?
Thx 4 advance!
Change P-12 to P-10 first
Roldanhollow said:
Hi all!
I wanna update my p7-L12 EMUI 2.3 to EMUI 3.0.. and i don't see where is this UPDATE.APP in this page emui .com /plugin.php?id=hwdownload
Only i found L00, L05-07, L09 but not L12...
Anyone know about this?
Thx 4 advance!
Click to expand...
Click to collapse
First you must change the variant of your P-12 to P-10 with EMUI 2.3. There are some people who have already done this change, I also had P-12 installed in my cell phone, "Latinoamerican version" and I took the risk of changing ROM, it is very simple, you can find many roms to download, I started with B126, then B-133, B135, B136, B138 and B602 which works with 3.0 EMUI. HTCMANIA provides a good list of roms but I recommend you to read first XDA and HTCMANIA forums just before Performing any change to your cell phone. http://www.htcmania.com/showthread.php?t=876021
http://www.htcmania.com/showthread.php?t=928344
AFTER changing your variant rom from L-12 TO L-10 I recommend you to read this thread that explains to update from 2.3 to 3.0. Remember this update is in beta phase since final version has not released yet. http://forum.xda-developers.com/ascend-p7/general/ascend-p7-b602-emui-3-0-international-t2971697
Gracias por contestar!
Oye espera!!!
Veo que tu sabes español!!
Mira mejor hablemos en español.. me comentas que mejor cambie la variante de P7-L12 a P7-L10... Pero en la pagina solo aparecen para L00, L05-L07 y L09...
Ya tu lo hiciste con el tuyo?
Que pierdo con bajarme del L12 al L10? sabes algo de eso?
It is not possible.....
Roldanhollow said:
Oye espera!!!
Veo que tu sabes español!!
Mira mejor hablemos en español.. me comentas que mejor cambie la variante de P7-L12 a P7-L10... Pero en la pagina solo aparecen para L00, L05-L07 y L09...
Ya tu lo hiciste con el tuyo?
Que pierdo con bajarme del L12 al L10? sabes algo de eso?
Click to expand...
Click to collapse
It is not possible to talk in spanish despite that I am LatinoAmerican, but the thing is this forum is only in English and one of the mandatory rules to post here in XDADEVELOPERS is to write in English, otherwise the information you put here will be deleted and you might be banned. No pierdes nada, antes mejor pues el L-12 esta muy desactualizado y al pasarte a la version L-10 antes se actualiza y va más rapido y estable, te recomiendo buscar la ROM con la versión general sin operadora. If you need ROMS for our device, go here and it is in spanish: http://www.htcmania.com/showthread.php?t=876021
Be careful, never install ROMS with L-00 variant since these roms are for Chinese versions with double sim card.. Good luck and remember read first before performing any change and do it at your own risk...
Ok English so! hehe
Ok don't worry.. i'll talking english
Well.. I'm downloading C_Temp_Sophia-L10 L10V100R001C00B133SP01 Android 4.4.2, Emotion UI 2.3 General Version of Europe..
i decided download this because not are associate to enterprise telephony.
Comming soon, i'll install this UPDATE.app but for HiSuite program and next i'll install B602...
Wish me luck hehe!
Good luck!!!!
Roldanhollow said:
Ok don't worry.. i'll talking english
Well.. I'm downloading C_Temp_Sophia-L10 L10V100R001C00B133SP01 Android 4.4.2, Emotion UI 2.3 General Version of Europe..
i decided download this because not are associate to enterprise telephony.
Comming soon, i'll install this UPDATE.app but for HiSuite program and next i'll install B602...
Wish me luck hehe!
Click to expand...
Click to collapse
Good luck, do not forget to do a nandroid backup just is case.
b602 update.zip
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Roldanhollow said:
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Click to expand...
Click to collapse
copy update.zip (don't extract it) in your sdcard/dload folder and then open updater app and choose update from local
Wrong
Roldanhollow said:
hi again..
another question...
The update file (b602) have extension .zip and not .app...
how flash this?
This update.zip contain a UPDATE.APP but is only 32 mb...
Click to expand...
Click to collapse
You do not need to uncompress the FOLDER UPDATE.ZIP, just put it in the /dload folder and UPDATE with ACTUALIZACIONES Y ACTUALIZACION LOCAL del propio menu del celular, no lo hagas por los 3 botones porque cuando lo instales te saldrán errores. The zip file must be 600mb.
YEAH!
i did it!
Thax!!!
hey you have skype?
Yes, I have....
Roldanhollow said:
i did it!
Thax!!!
hey you have skype?
Click to expand...
Click to collapse
but I do not have installed since I prefer using LINE.
Godwarrior1 said:
but I do not have installed since I prefer using LINE.
Click to expand...
Click to collapse
Hello
i see this thread and i think i have the same problem but my p7 is australian version p7-l11
i don't get any updates and i'm still on EMUI 2.3 so i decided to change to global version p7-l10
could you help me please and tell me what i want to do this ?
Thanks
Try it
I'm im l12 variant an change it to l10 with b133 you can try the same. download the update, extract the update.app and put in sd root \dload, then just apply the local update from update menú.
Just to share a few tips for some L12 owners that purchased B119 devices (in my case also arrived unlocked). After try almost all ROMs unsuccessfully (FAIL message while verifying package) I tried a VENDOR CUST (from B133 package) and after a really long formatting phase it end the process (with a FAIL message but at the end). Reboot. After that the only ROM that worked was a B119 of L10 (I used SPAIN one) and it end the process (again with a FAIL message at the end). Reboot. After that I chose B133 (general) and it worked (again with a FAIL message at the end). Now I'm just waiting for B621 download to install. Thanks so much to all the guidance here and official ROMS located below. http://www.htcmania.com/showthread.php?t=876021
Update
Hola como puedo actualizar mi Huawei Advanced P7 L-12? He tratado pero siempre dice no hay,mi Android es 4.4.2 pero no se si es kit Kat o cual,y puedo actualizar a 5.5.1 lolilop? Gracias espero tu ayuda.Era administrator pero ya no es,como se si esta arraigado,rooteado?
Can I change my L-12 with b856 emui 3.1 Android 5.1.1 to L-10 emui 3.1 directly?
Hi!
i´m from México and i have a S4 active(sgh-i537) and my firmware is 4.3 with Telcel, but can´t update to 4.4.2 or 5.0.1, i check for updates and say me "the last udates have already been installed"
my baseband is I537UBUAMF1.
Help me plz.
GerryDC said:
Hi!
i´m from México and i have a S4 active(sgh-i537) and my firmware is 4.3 with Telcel, but can´t update to 4.4.2 or 5.0.1, i check for updates and say me "the last udates have already been installed"
my baseband is I537UBUAMF1.
Help me plz.
Click to expand...
Click to collapse
Use this guide to use Odin to manually update to NE3 kitkat, from which you can then update to lollipop if you wish
thisisapoorusernamechoice said:
Use this guide to use Odin to manually update to NE3 kitkat, from which you can then update to lollipop if you wish
Click to expand...
Click to collapse
Thaks but doent works,when Odin is ready with all files send me this errors http://imgur.com/pYdkIhE
File PIT
GerryDC said:
Thaks but doent works,when Odin is ready with all files send me this errors http://imgur.com/pYdkIhE
File PIT
Click to expand...
Click to collapse
You have the Telcel version of the i537, there is no firmware update for your phone. The files @thisisapoorusernamechoice linked to only work with the AT&T version of the i537. Sorry, but there's nothing you can do until Telcel updates your firmware.
UPDATE
yesterday , i update my S4A, i have 4.3 AT & T version, the problem is this: my S4A had not wifi.
Build Number: I537UCUBML2.
GerryDC said:
Thaks but doent works,when Odin is ready with all files send me this errors http://imgur.com/pYdkIhE
File PIT
Click to expand...
Click to collapse
el problema con tu telefono es que es la version para mexico y las actualizaciones de software son para la version de at&t de estados unidos.
lo podrias actualizar si le cambias el bootloader pero no es seguro podrias poner tu telefono en hardbrick. mejor vendelo y compra una version de at&t. eso hice yo .
---------- Post added at 06:24 PM ---------- Previous post was at 06:22 PM ----------
GerryDC said:
yesterday , i update my S4A, i have 4.3 AT & T version, the problem is this: my S4A had not wifi.
Build Number: I537UCUBML2.
Click to expand...
Click to collapse
you may find the solution for your phone on this thread
http://forum.xda-developers.com/showthread.php?t=2689218
GerryDC said:
yesterday , i update my S4A, i have 4.3 AT & T version, the problem is this: my S4A had not wifi.
Build Number: I537UCUBML2.
Click to expand...
Click to collapse
Hola. ¿Cómo lograste instalar la version de at&t? ¿Lograste arreglar el problema con el wifi? Tengo el mismo telefono y no he podido actualizarlo mas allá de la version 4.3. Espero puedas ayudarme, gracias.
AlanKH said:
Hola. ¿Cómo lograste instalar la version de at&t? ¿Lograste arreglar el problema con el wifi? Tengo el mismo telefono y no he podido actualizarlo mas allá de la version 4.3. Espero puedas ayudarme, gracias.
Click to expand...
Click to collapse
Tengo el mismo problema, tengo mucho tiempo buscando alguna actualizacion pero sin exito, ... ni custom ROMs existen para el S4 active de telcel.
IceClimberMx said:
Tengo el mismo problema, tengo mucho tiempo buscando alguna actualizacion pero sin exito, ... ni custom ROMs existen para el S4 active de telcel.
Click to expand...
Click to collapse
Parece que no tenemos un telefono muy popular. En fin, muchas gracias!
Just upgraded!! G870AUCU2DPH2
Downloading now! How you liking it so far?
Is it possible to get the flashable Odin file because I can't find it anywhere?
boyhonda5 said:
Downloading now! How you liking it so far?
Click to expand...
Click to collapse
Looks Good so far
berniesteven said:
Looks Good so far
Click to expand...
Click to collapse
Ah.. please someone figure out how to share the files for those of us out of the US!
Quien tiene la rom para instalarla por odin? No la encuentro por ningun lado :c
JoseMoreno27 said:
Quien tiene la rom para instalarla por odin? No la encuentro por ningun lado :c
Click to expand...
Click to collapse
y todavia no lo vas a encontrar amigo por que es nuevo el software
At least good new!!
Between Marshmallow and Good Lock, I can almost excuse the mess they've made of rooting. Almost.
tomelich said:
y todavia no lo vas a encontrar amigo por que es nuevo el software
Click to expand...
Click to collapse
Tenemos que estar al tanto todos haber cuando sale,a mi tb me interesaria,i mucho mas claro,esta si es pefecta sin fallos
Can anyone who updated try to find the proper links to download the ota manually?
If anyone can follow these steps after they updated, it could help those of us outside the US greatly!
---clearer directions from (http://forum.xda-developers.com/showpost.php?p=68425868&postcount=5)
The first boot after you take the OTA, dial *#8736364#. This brings up the firmware update menu. Click on 'Result'. There, you will see a screen that looks like the one attached.
Here is how things worked for G900A:
I went to the server URL in the attached image using stock Samsung browser. This downloaded a file named desc and then I got a prompt to download the OTA. I clicked OK and the download started and failed.
However, the failed download did create a file named desc.bin on my phone. I clicked on that file and to my surprise, I got a pop up menu that had a download option. I selected download and then finally the full 911mb file named desc.bin downloaded on my phone.
I renamed it, changed the extension to zip and uploaded it!
Click to expand...
Click to collapse
The AT&T site says the baseband must be PB1, PB3, or PB6. My device shows PB5. I'm on 5.1.1 (LMY47X) with the July 1 security updates. How do I get a different baseband? I assume I would flash with Odin, but do these exist outside of a full update package?
I'd love to get a flashable zip rather than relying on OTA. Don't mind doing a data wipe to get it.