I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks
RafaySid said:
I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks
Click to expand...
Click to collapse
Band support on the 2013 X relies on hardware and software(rom/radio code), BOTH have to support the bands you want to use. If the hardware doesn't support it, flashing a rom/radio that does wont help.
Hello,
Now with bootloader unlock & Root is it possible to Unlock Band 20 for 4G ?( actually i saw it used to cdma (800mhz) )
I live in France so i don't need CDMA , only 4G and GSM Band.
Regards,
X7ss said:
Hello,
Now with bootloader unlock & Root is it possible to Unlock Band 20 for 4G ?( actually i saw it used to cdma (800mhz) )
I live in France so i don't need CDMA , only 4G and GSM Band.
Regards,
Click to expand...
Click to collapse
Probably, search for those threads that show how to install the HTC modem driver and use QXDM to change the LTE bands. This is assuming that there is hardware support.
You can use NV Calculator or LTE Band Calculator to get the needed value.
You'll have to boot into bootloader and boot to BP Tools in order to install the modem driver on your computer.
hi tell me the spc code what u using I'm qxdm .. ?? mine 000000 is not working pls help me .. how to get spc code
aneeshmbabu said:
hi tell me the spc code what u using I'm qxdm .. ?? mine 000000 is not working pls help me .. how to get spc code
Click to expand...
Click to collapse
I don't think I've ever been prompted to enter a code in QXDM. Everything is done from the PC after booting BP Tools on the phone.
OK I will try
X7ss said:
Hello,
Now with bootloader unlock & Root is it possible to Unlock Band 20 for 4G ?( actually i saw it used to cdma (800mhz) )
I live in France so i don't need CDMA , only 4G and GSM Band.
Regards,
Click to expand...
Click to collapse
Sorry to disappoint you, but can't be done. Many people have tried to enable LTE band 20 on the Moto XT1225 (and it would be seemingly be more possible with that Quark variant which was sold internationally, rather than the U.S. XT1254)
Using NV calculator, QXDM, QPST, etc, the software changes will show LTE band 20 is enabled but you still won't actually receive/send any signal.
...
Samsung s5 support LTE-A
LTE band lock & Rat lock..
...
Anyone please confirm me
Zuk z1 support LTE - A ?
Send the srceenshot of 2-tab in network guru app..
Because my telecom operator not have Lte-A..
jiojio said:
3.lte band locking possible by help of NETWORK SIGNAL GURU app
Screenshot below..
Click to expand...
Click to collapse
Is it worki'g to unlock lte band ? Thanks
meibourne said:
Is it worki'g to unlock lte band ? Thanks
Click to expand...
Click to collapse
i am not have time
but
procedure is available for one plus one
http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
Hi! 4G isnt working on my Mi9 with A1 network but they use the suported frequencies. I tried reseting APN and some other changes in developer options nothing worked. Any idea?
I'm gona try and flash the ROM when I unlock it from CN to global or EEA. which one should I chose if there is any big difference?
urbyx said:
Hi! 4G isnt working on my Mi9 with A1 network but they use the suported frequencies. I tried reseting APN and some other changes in developer options nothing worked. Any idea?
I'm gona try and flash the ROM when I unlock it from CN to global or EEA. which one should I chose if there is any big difference?
Click to expand...
Click to collapse
Which variant do you have? if it's the alita / explorer / transparent edition (8/256GB or 12/256GB) then there's NO BAND 20, which is LTE for many providers. Have you checked this?
EDIT: see here, perhaps you're in an area that doesn't use band 7 and only band 20? If this is the case... No ROM you flash can alter that, it's hardware related. ONLY global devices (64/128GB) support band 20
reg66 said:
Which variant do you have? if it's the alita / explorer / transparent edition (8/256GB or 12/256GB) then there's NO BAND 20, which is LTE for many providers. Have you checked this?
EDIT: perhaps you're in an area that doesn't use band 7 and only band 20? If this is the case... No ROM you flash can alter that, it's hardware related. ONLY global devices (64/128GB) support band 20
Click to expand...
Click to collapse
I have transparet ediotion 8/256gb. Checked there is no band 20 in my area but 4g works everywhere else
Should I still flash the ROM to global or eea? Can I relock it after or is it gona brick..
urbyx said:
I have transparet ediotion 8/256gb. Checked there is no band 20 in my area but 4g works everywhere else
Should I still flash the ROM to global or eea? Can I relock it after or is it gona brick..
Click to expand...
Click to collapse
Do not relock bootloader after flashing rom, it will most likely brick your device. Flash another ROM if you like but you won't get band 20
May I ask, why do you want to relock bootloader after flashing a new ROM?
Hello. 5G network is comming soon . I make today method for unlock 5G on 700mhz for this device . Problematic is only icon od network because 5G network is visible as 4G (have only 4G icon , but work in 5G mode , speedtest say the same) . Unlock method to avalaible soon , and publish in this thread . This method unlock all bands supported by device . Avalaible info about device is on frequencycheck.com with all bands . Unlocked all bands is visible on screenshot's in atach . What do you think about 5G on this device ???? Unlock 5G working only in european region devices and global . Devices from other regions have only unlocked new bands , I don't test this method on devices from other regions .
What you need to do that:
1.Any Qualcomm device - with this guide you unlock only Qualcomm cpu devices
2.NV values
3.QPST and QXDM for edit values
4.Installed lineageos with magisk
5.Network guru app for enable new bands after correct programing
6.ADB and FASTBOOT - with drivers to device too
7.Minimum 1 hour for do that
OK. Let's go:
Download drivers and flash lineageos with twrp - you need to install magisk and lineageos - Method for unlock don't work with stock miui .
Install drivers and turn on developer settings in your device and check 3 adb options for correct set all .
If you have magisk and lineagos , you can start adb and write command adb shell , in shell you need to write and press enter this command setprop sys.usb.config diag .
Start QPST and add port
Start QXDM , and find nv values (look down)
Change values and press write - do the same for second sim card (look up on qxdm and check dual sim , set this values for 0 and 1 if no possible you brick your device without option recovery signal. Write values to 0 and 1 after write press read and check . Do that with all values . Make copy of your values to notepad txt file for your safety . Reboot device , install network signal guru and lock all bands in 2G,3G,CDMA,4G . Device find 5G network on 700mhz as ''4G'' network because radio don't have icon and name for 5G .
More info and know how soon if i find some time for do that.
NV values:
0441: 0x780
0946: 0x0FF8
1877: 3460734838925428608
2954: 268894208
6828: 17591112253439
6829: 17591112253439
For enable total all bands in this device or other device with qualcomm cpu you must enter this values:
NV values:
0441: 0xFFFF
0946: 0xFFFF
1877: 18446744073709551615
2954: 4294967295
Values for LTE is not changed (LTE 6828 and 6829)
6828: 17591112253439
6829: 17591112253439
This values working on all rooted devices with qualcomm cpu inside with all wariants of cpu. If you want to share or publish this values write to me pm.
IMPORTANT: You must disable unused bands in EU if you are in EU in this app by uncheck in lock bands option CDMA frequencies . If you don't do that , your device to be scan all bands next five minutes than find signal !! If you are in other country , you can find in google frequencies used in your country and enable it only .
If you use my guide please press thanks
reserved
Tweaked system and unlocked radio give better speed of internet.
Why aren't you posting this?
DebrupGhosh said:
Why aren't you posting this?
Click to expand...
Click to collapse
1.Mod move my thread here , from software development
2.I make test's with radio and calculations - possibly I unlock to 5G for 3,5Ghz+ if documentation of soc allow me for do that
3.I makeing know/how for users with instruction how to unlock radio
4.I make patched lineageos based on last available (look up) , with deodex for next unlocking
5.I need testers listen to me how to do all step by step , because one mistake, one point not do and you have hard brick radio and phone without signal ... i must end my work , users must have lineageos for correct unlock because magisk with stock rom not working and device don't have su libaries and busybox needed for unlock . Users and you bro must wait not too long . Say me what is your contry , i need to check bands for lte in your country and what is your model - I have from -EG series (backside phone have model) ????
MAREK10747 said:
1.Mod move my thread here , from software development
2.I make test's with radio and calculations - possibly I unlock to 5G for 3,5Ghz+ if documentation of soc allow me for do that
3.I makeing know/how for users with instruction how to unlock radio
4.I make patched lineageos based on last available (look up) , with deodex for next unlocking
5.I need testers listen to me how to do all step by step , because one mistake, one point not do and you have hard brick radio and phone without signal ... i must end my work , users must have lineageos for correct unlock because magisk with stock rom not working and device don't have su libaries and busybox needed for unlock . Users and you bro must wait not too long . Say me what is your contry , i need to check bands for lte in your country and what is your model - I have from -EG series (backside phone have model) ????
Click to expand...
Click to collapse
From india, I've EI series
DebrupGhosh said:
From india, I've EI series
Click to expand...
Click to collapse
Your device is fully support all bands in your country . https://www.frequencycheck.com/compatibility/05AZu0k/xiaomi-redmi-7a-dual-sim-td-lte-in-32gb-m1903c3ei-mzb7989in-mzb7800in-mzb8008in-xiaomi-pine/india .
Unlock bands for you don't do for you to much . But if you want to have option select band for faster internet do somthing for you . You need to install lineageos and to lineageos magisk and app guru network from play store .After unlock bands you find in network guru extra bands . You can try to check what what's band after select to be faster for you .
Soo... After update unlocked is all bands avalaible for this CPU . Actually soon I publish how to unlock all bands + 5Ghz Wi-Fi mode . All bands working correct.
MAREK10747 said:
Your device is fully support all bands in your country . https://www.frequencycheck.com/compatibility/05AZu0k/xiaomi-redmi-7a-dual-sim-td-lte-in-32gb-m1903c3ei-mzb7989in-mzb7800in-mzb8008in-xiaomi-pine/india .
Unlock bands for you don't do for you to much . But if you want to have option select band for faster internet do somthing for you . You need to install lineageos and to lineageos magisk and app guru network from play store .After unlock bands you find in network guru extra bands . You can try to check what what's band after select to be faster for you .
Click to expand...
Click to collapse
Can you enable carrier aggregation in this mobile???
And by 5g you meant 5ghz wifi or 5g mobile network? If it's 5g mobile network unlock then may i use your guide?
---------- Post added at 03:24 AM ---------- Previous post was at 03:19 AM ----------
MAREK10747 said:
Your device is fully support all bands in your country . https://www.frequencycheck.com/compatibility/05AZu0k/xiaomi-redmi-7a-dual-sim-td-lte-in-32gb-m1903c3ei-mzb7989in-mzb7800in-mzb8008in-xiaomi-pine/india .
Unlock bands for you don't do for you to much . But if you want to have option select band for faster internet do somthing for you . You need to install lineageos and to lineageos magisk and app guru network from play store .After unlock bands you find in network guru extra bands . You can try to check what what's band after select to be faster for you .
Click to expand...
Click to collapse
Did you say unlock bands won't be of much help to me because my device has all indian bands and 5g is yet unavailable in india?
DebrupGhosh said:
Can you enable carrier aggregation in this mobile???
And by 5g you meant 5ghz wifi or 5g mobile network? If it's 5g mobile network unlock then may i use your guide?
Did you say unlock bands won't be of much help to me because my device has all indian bands and 5g is yet unavailable in india?
Click to expand...
Click to collapse
On my device after little ''re-work'' agregation working , but i testing now it . Working stable .
5G network on 700mhz , but 700mhz working only in EU and maybe in US . 5 GHZ wifi , i plan to enable because CPU support that . I don't know why wifi on 5Ghz is disable , but I enable it later .
In india 5G network working , but i'm not sure band .
MAREK10747 said:
On my device after little ''re-work'' agregation working , but i testing now it . Working stable .
5G network on 700mhz , but 700mhz working only in EU and maybe in US . 5 GHZ wifi , i plan to enable because CPU support that . I don't know why wifi on 5Ghz is disable , but I enable it later .
In india 5G network working , but i'm not sure band .
Click to expand...
Click to collapse
How to activate carrier aggregation?
DebrupGhosh said:
How to activate carrier aggregation?
Click to expand...
Click to collapse
First try to use lineageos + network guru app and unlock all bands to values from second values and reboot . In guru app disable all cdma bands , activate all wcdma , gsm , lte and reboot . This possbile activate it automaticly , if not add comment .
Big thanks for that, I didn't know that is possible. Here in Germany we have Band 28 (700 MHz) for LTE (But also for 5G). Will it also be activated when I follow your instructions, or only for 5G? LTE B32 (1500 MHz) would be good too. Could you name the values for it? Or a guide on how to find them out?
xuxu1 said:
Big thanks for that, I didn't know that is possible. Here in Germany we have Band 28 (700 MHz) for LTE (But also for 5G). Will it also be activated when I follow your instructions, or only for 5G? LTE B32 (1500 MHz) would be good too. Could you name the values for it? Or a guide on how to find them out?
Click to expand...
Click to collapse
Soo... Possbile you activate 2 bands 4G and 5G for 700mhz . You need only lineageos because i'm not sure how it working in stock rom . First published values unlock all bands of LTE and 5G too . For correct working please install network app guru , gapps
if you need , magisk for correct working of network guru app and lock bands all after unlock and reboot . If you after reboot lock in app all bands of lte you activate too 5G working . You can see in app band actually working , 700mhz working correct after unlock . I waiting for 700mhz in Poland because we don't have this band but i test in germany 700mhz (travel to germany in moment of tests 700mhz ) . Soon i Publish fixed lineageos for 5G and 4G network speed . My result of speed test in Poland after patch system and modem is actually : https://www.speedtest.net/my-result/a/6179268278 In Germany your speed test result can be faster than I have in Poland. You decide what you want to do with your device . 50% of unlocked bands for this device is here: https://www.frequencycheck.com/mode...al-dual-sim-td-lte-32gb-m1903c3eg-xiaomi-pine
MAREK10747 said:
First try to use lineageos + network guru app and unlock all bands to values from second values and reboot . In guru app disable all cdma bands , activate all wcdma , gsm , lte and reboot . This possbile activate it automaticly , if not add comment .
Click to expand...
Click to collapse
I can disable lte band but there is no option to disable cdma bands in network signal guru app
DebrupGhosh said:
I can disable lte band but there is no option to disable cdma bands in network signal guru app
Click to expand...
Click to collapse
give me screen shots
(deleted)
MAREK10747 said:
give me screen shots
Click to expand...
Click to collapse
See
DebrupGhosh said:
See
Click to expand...
Click to collapse
ok. possible is ok . Give next screen shot form LTE .
MAREK10747 said:
ok. possible is ok . Give next screen shot form LTE .
Click to expand...
Click to collapse
Lte