Flashing Radio for 4G LTE Bands - Moto X Q&A

I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks

RafaySid said:
I have an XT1058 in Pakistan on Rogers 5.1 ROM but the LTE band used here is band 3 (1800 MHz), which the XT1058 does not support. I haven't tried running LTE on it yet but can I flash XT1052 (Europe and Asia Retail) radios on my phone? Or flash whole SBF? Is there any way to unlock band 3? Would it brick my phone?
@KidJoe Please help.
Thanks
Click to expand...
Click to collapse
Band support on the 2013 X relies on hardware and software(rom/radio code), BOTH have to support the bands you want to use. If the hardware doesn't support it, flashing a rom/radio that does wont help.

Related

[Q]Flash XT056 to Verizon XT1060 Firmware

what Happens if I flash my XT1056 to Verizon firmware there is only one difference XT1056 supports LTE 1900 mHz and Verizon Supports LTE 850 mHz can I hard brick my Moto X ? or I can re-flash back on stock XT1056 after try ?

Tmobile 4.4.3 sbf don´t signal with XT1052 Europe Version.

Hello Guys.
I flashed Tmobile 4.4.3 sbf in my XT1052 europe.
Every is fine but I had signal.
The only solution that I see is flash baseband of sbf eu.
With this I have signal. LMT, 3G, Edge.... Etc.... But I´ll like use the radio original of tmobile ever that possible.
My operator in Spain is Vodafone.
I saw other thread but is no solution for me because, the People was run a simcard of tmobile and I want run rom tmobile sbf in my XT1052 with Vodafone Spain and I can´t it.
Thanks in advance.
Nothing? :/
Enviado desde mi XT1053 mediante Tapatalk
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
mandrsn1 said:
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
Click to expand...
Click to collapse
And prior to that probably adjust build.prop and set the correct APN for your provider.
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
isaakmg said:
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
Click to expand...
Click to collapse
I don't quite understand your situation. Do you have signal but no data transmission or there is no mobile signal at all? In the first case set APN. In the second case something went terrible wrong during flashing. Dirty flash is possible reason what caused impact of two different systems. I assume that you have bootloader unlocked. Go back to stock and make a clean flash.
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
isaakmg said:
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
Click to expand...
Click to collapse
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
piskr said:
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
Click to expand...
Click to collapse
Why don't ran radio tmobile in 2g por 3g for calls and data?
isaakmg said:
Why don't ran radio tmobile in 2g por 3g for calls and data?
Click to expand...
Click to collapse
As I said dirty flash is possible reason. Try to get back original entire system (if you're unlocked) and this time totally follow the instructions.
I have unlocker version.
Flash total clean with adb....
Nothing of signal.....
Enviado desde mi XT1053 mediante Tapatalk
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
ujoty said:
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Because in general the works most fine....

Modem/Radio

OK so I have the xt1050 variant, bootloader unlocked. LTE isn't fully supported on the GSM side of the phone and no CDMA carriers in my area will activate the phone, the only one that would doesn't exist anymore. I was wondering if I could flash the modem from another variant, could I use LTE on GSM? Or will it mess everything up? If I can do so, which variant do I need to take the NON-HLOS.bin from?
My device info=
My original OS: Android 4.4.2.
My original system version: 161.44.31.ghost_row.
ACG.en.US
Bootloader: 30.B4
Current OS: cm13 nightly 9/21
Another thing, will flashing/updating modem fix the speakerphone bug? Not sure where that comes in but I was reading the forums and saw that it would but I would have to update my bootloader also, and I can't ?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
OK so I have the xt1050 variant, bootloader unlocked. LTE isn't fully supported on the GSM side of the phone and no CDMA carriers in my area will activate the phone, the only one that would doesn't exist anymore. I was wondering if I could flash the modem from another variant, could I use LTE on GSM? Or will it mess everything up? If I can do so, which variant do I need to take the NON-HLOS.bin from?
My device info=
My original OS: Android 4.4.2.
My original system version: 161.44.31.ghost_row.
ACG.en.US
Bootloader: 30.B4
Current OS: cm13 nightly 9/21
Another thing, will flashing/updating modem fix the speakerphone bug? Not sure where that comes in but I was reading the forums and saw that it would but I would have to update my bootloader also, and I can't ?
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Salik Iqbal said:
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Click to expand...
Click to collapse
I'd rather stay away from the gpt partition, last time I messed with it, I ended up with a brick. But I will try the NON-HLOS from the xt1053 stock ROM. Thanks for the help ??
Sent from my Moto X using Tapatalk
Salik Iqbal said:
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Click to expand...
Click to collapse
Please reply back. I've tried everything I know to get LTE on GSM but it's still sticking with H+. And when trying to flash another variants modem and it still brings up CDMA on here. Any idea why when I'm grabbing the modem from the xt1053 and xt1058. Neither are CDMA.
I went ahead and flash the gpt so the speakerphone works now. That's the only good thing that's come out of me flashing this phone.
I've flashed NON-HLOS and the fsg. From both xt1053 and xt1058 variants. What should I do?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
What should I do?
Click to expand...
Click to collapse
Buy god damn XT1058 :laugh:
Modem exchange gives nothing. And when you speak about LTE, you don't say anything of the bands available on your carrier(s). Get this information first.
XT1050 LTE bands = 700, 1700 MHz (B13/B4)
XT1058 LTE bands = 1900, 1700, 850, 2600, 700 MHz (B2/4/5/7/17)
XT1052 LTE bands = 800, 1800, 2600 MHz (B20/B3/B7)
XT1053 LTE bands = 700, 1700 MHz (B13/B4)
etc.
s5610 said:
Buy god damn XT1058 [emoji23]
Modem exchange gives nothing. And when you speak about LTE, you don't say anything of the bands available on your carrier(s). Get this information first.
XT1050 LTE bands = 700, 1700 MHz (B13/B4)
XT1058 LTE bands = 1900, 1700, 850, 2600, 700 MHz (B2/4/5/7/17)
XT1052 LTE bands = 800, 1800, 2600 MHz (B20/B3/B7)
XT1053 LTE bands = 700, 1700 MHz (B13/B4)
etc.
Click to expand...
Click to collapse
It's straight talk att network.
Sent from my Moto X using Tapatalk
But oh well. I love my phone. I'll stick with H+
Sent from my Moto X using Tapatalk
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
s5610 said:
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
Click to expand...
Click to collapse
Mine is CDMA unlocked too. But straight talk wouldn't activate the CDMA side because it's not a Verizon or Sprint phone. I know Verizon works and it gets LTE on my phone. So why not on GSM. I noticed when switching to LTE only, it has a lock beside the network. Contacted them and they said it was a device issue. Is LTE locked on the GSM side? This is a weird phone but I love it bc it's bootloader unlocked.
Sent from my Moto X using Tapatalk
s5610 said:
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
Click to expand...
Click to collapse
And yes you're right, it's not too bad but it is slower than LTE especially in the browser.
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
Is LTE locked on the GSM side?
Click to expand...
Click to collapse
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
I've actually tried to flash the radio from different variants. Even the AT&T modem has the lock beside the network. I'm gonna get a new sim but the thing is, I just activated the phone 3 days ago...thanks ?
Sent from my Moto X using Tapatalk
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
And I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Sent from my Moto X using Tapatalk
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Click to expand...
Click to collapse
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
s5610 said:
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
Click to expand...
Click to collapse
Actually I get better signal when flashing att modem so it does have some effect.
Sent from my Moto X using Tapatalk
s5610 said:
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
Click to expand...
Click to collapse
Just for the record I'm not trying to turn my phone into another one, that's impossible. I'm just trying to get LTE. But thanks for your help...
Sent from my Moto X using Tapatalk

Can I flash xt1052 modem to unlock band 3 on my xt1053 tmo

Hi friends,
Can I flash xt1052 modem to unlock band 3 on my xt1053 tmo, for making it to support jio.

US Cellular V405UA bands

Hi,
Does anyone know which bands are enabled on the US Cellular v405ua firmware? I currently have the 20a QA firmware flashed which has pretty much all bands enabled, but there haven't been any updates to it. I was thinking about flashing the US Cellular 20e version, but am not willing to lose any bands.
Alibaba0101 said:
Hi,
Does anyone know which bands are enabled on the US Cellular v405ua firmware? I currently have the 20a QA firmware flashed which has pretty much all bands enabled, but there haven't been any updates to it. I was thinking about flashing the US Cellular 20e version, but am not willing to lose any bands.
Click to expand...
Click to collapse
Just did an OTA update to 20f with Verizon. Security patch to 1 Jan 2020.
Sent from my LM-V405 using Tapatalk
View attachment 4936087
Einsteindks said:
Just did an OTA update to 20f with Verizon. Security patch to 1 Jan 2020.
Sent from my LM-V405 using Tapatalk
View attachment 4936087
Click to expand...
Click to collapse
If you did OTA, i assume you are running stock? Not sure that helps me. Looks like att specific bands are disabled on the lg 40 from us cellular. Looks like i'm stuck with the 20a qa7 firmware for now.
In case this helps anyone else. US Cellular lg v40 specs:
4G LTE Bands 1/2/3/4/5/7/12/13/20/25/46/66/71; 800 MHz CDMA; 1.9 GHz CDMA PCS
https://www.uscellular.com/phones/lg-v40-thinq
lg v405qa7 firmware specs:
LTE Bands 1/2/3/4/5/7/8/12/13/14/17/20/25/26/28/29/30/38/39/40/41/46/66/71; WCDMA Bands 1/2/4/5/8; GSM 850/900/1800/1900 MHz; 800 MHz CDMA; 1.9 GHz CDMA PCS; Secondary 800 MHz CDMA
https://www.lg.com/us/cell-phones/lg-V405QA7-unlocked-v40

Categories

Resources