Related
Qualcomm has just released a developer preview of their proprietary adreno drivers for nexus devices (https://developer.qualcomm.com/download/adrenosdk/user-mode-driver-binaries-adreno.zip), unfortunately no changelog has been posted and n4 is not oficially supported.
You must flash the n7 version of these to work, but in case you don't want to register to download or etc. etc. i'll post the flashable zip here (i just renamed it to prevent confusion)
As the qcom site says: This release is intended only for developers, and does not meet our customer release quality. So use at your own risk.
Android lollipop is dead and latest preview is for Marsmallow only!!!
https://www.dropbox.com/s/oiet6x3d3jglqqf/Adreno-Nexus4-MOB30D.zip?dl=0
Well, unfortunately nexus 7 support also is ended. Here is an zip package for android N with libraries pulled from msm8974 devices (provided by CyanogenMod). Use at your own risk.
https://www.dropbox.com/s/zw1e3reuwdwzzsf/Adreno-Nexus4-NDE63V_msm8974.zip?dl=0
CAF LA.BF.1.1.3 package (egl dated november 2016)
https://www.dropbox.com/s/vqbot5z0yyij76h/Adreno-Nexus4-N-CAF.zip?dl=0
Anyone tried it?
Wysłane z mojego Nexus 4 przy użyciu Tapatalka
New drivers will be good for CyanogenMod 12.1 ?
I don't know if anyone has been trying these drivers, but it appears that Google Maps will crash when using it. I did pull a logcat, if anyone needs it.
Links updated to a september driver release
Links updated to a october preview for Marshmallow. Lollipop is not supported anymore. OpenGL version bumped to v136.0.
voron00 said:
Links updated to a october preview for Marshmallow. Lollipop is not supported anymore. OpenGL version bumped to v136.0.
Click to expand...
Click to collapse
Can you run Antutu benchmark with it now? As in completing it instead of crashing?
Antutu 3D test passes, no crash.
Yup... I Like
voron00 said:
Antutu 3D test passes, no crash.
Click to expand...
Click to collapse
26208 running Franks... not too shabby
25575 on antutu and everything works on cataclysm with hells...thanks!!
sent by nexy 4
Can someone put it on other host? I can't townload it via phone.
Wysłane z mojego Nexus 4 przy użyciu Tapatalka
Interesting.
liquid64 said:
I don't know if anyone has been trying these drivers, but it appears that Google Maps will crash when using it. I did pull a logcat, if anyone needs it.
Click to expand...
Click to collapse
Have you tried the maps apk pulled from a n7 rom? i believe they have a different dpi.
Working good on 6.0 ?
Wysłane z mojego Nexus 4 przy użyciu Tapatalka
Flashed on top of Frank and all is butter.
Im using it with Cataclysm (Oct 17 2015) and Hellscore kernel b84-M. I wiped Cache and Dalvik Cache after install and then rebooted. Is all good, thanks
Everything is working well with Frank build 10-19/Taurus kernel. No problems at all. Thanks!
I'm noob on this matter. So, some questions:
- What benefits I would have flashing it?
- Can I install without any "wipe"?
- Just need to have a 6.0 ROM or also need a Custom Kernel?
Thanks!
rodrigoswz said:
I'm noob on this matter. So, some questions:
- What benefits I would have flashing it?
- Can I install without any "wipe"?
- Just need to have a 6.0 ROM or also need a Custom Kernel?
Thanks!
Click to expand...
Click to collapse
-Benefits would be optimizations. I don't know what exactly but maybe someone else could shed some light on it.
-I just flashed it in twrp no wipe needed.
-Any marshmallow kernel is fine as far as I know.
Before and after antutu
Can anybody post before and after antutu?
Its unofficial,
If you want the link DM me.
Edit: Here is the link: https://www.androidfilehost.com/?fid=24052804347849450
If anyone wants me to take it down lmk. This is not my build, it was uploaded and most likely compiled by "DeVortex"
You also may want to check out this app:
https://www.reddit.com/r/Android/comments/3qp5q9/custom_quick_settings_app_allowing_for_broadcast/
It allows you to edit the quick settings tiles to anything you like. I tested it with this build of cm13 and it works great.
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
It's everything working? Or it's full of bugs for now ?
Will this work on klte (G900F) or the only kltespr ??
egonet said:
Will this work on klte (G900F) or the only kltespr ??
Click to expand...
Click to collapse
The link for the klte build is in the second post.
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
---------- Post added at 01:58 PM ---------- Previous post was at 01:41 PM ----------
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Tommidi said:
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Click to expand...
Click to collapse
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
mauriicio21 said:
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
Click to expand...
Click to collapse
I'll try apps like fingersecurity to see if the code for the fingerprint is already integrated in the cm13 code (And only hidden in settings) or totally missing
Wolf80 said:
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
Click to expand...
Click to collapse
Klte repo already working? If yes, yeah, open a thread
Enviado de meu SM-G900F usando Tapatalk
How stable is it?
And can I flash it over CM 12.1 on G900F without a factory reset?
broken3D said:
And can I flash it over CM 12.1 on G900F without a factory reset?
Click to expand...
Click to collapse
dont dirty flash on a new version of android. btw its very buggy, on my usc s5 i have service and i have wifi though so im very happy with how its all coming along. and i havent even flashed the latest build
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
daddymemoru said:
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
Click to expand...
Click to collapse
Did you do the factory reset first?
Tommidi said:
Did you do the factory reset first?
Click to expand...
Click to collapse
Yeah I did regular wipe and tried the advanced wipe with system, data, cache and dalvik. Makes me sad I can't seem to get this awesome rom to work.
Don't feel sad its buggy AF its unusable
Their really should make a thread for this I tried this on my unlock Sprint s5 and its not as buggy as people say Im using build 10302015 klte version and it pretty smooth now on tap doesn't work but everything else so far does. For those having trouble installing or it getting stuck booting just power off reboot recovery and factory reset again and it should work
orenzah said:
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
Click to expand...
Click to collapse
He has an updated one here for Oct 31 at the bottom
http://23.94.12.54/klte/rel/
Sent from my SM-G900W8 using Tapatalk
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-13-0-android-6-0-t3237502
Hi,
So I am back to compiling recoveries
Here goes TWRP 2.8.7 for Z2
(This might even work with Z3, but that's on your own risk. )
DOWNLOAD
http://ul.to/ch6yztfh
SOURCES/HOW TO BUILD
Built out of CM-13 trees with a couple of changes
swap /botable/recovery folder with http://github.com/omnirom/android_bootable_recovery (branch: android-6.0)
Few patches -
> https://github.com/TWRPXperia/andro...mmit/767c268ea53ccf30eb7835fb381b044224bc6e6d
> https://github.com/TWRPXperia/andro...mmit/14696c2fdc6757bb5057936e55354f18e4a88719
> https://github.com/TWRPXperia/andro...mmit/3059dff7a734401836db84e8c219f308aaba8e1b
We need cm13 before we need cm13 compatible recovery
New twrp theme looks cool, but i'm facing brightness issue, i hope it'll fixed ASAP ..
Sent from my Xperia Z2 using Tapatalk
Mikey94 said:
We need cm13 before we need cm13 compatible recovery
Click to expand...
Click to collapse
I can upload a build for you. Would you use without a camera ?
We are waiting for camera. Should be coming in 1-2 weeks
championswimmer said:
I can upload a build for you. Would you use without a camera ?[emoji14]
We are waiting for camera. Should be coming in 1-2 weeks
Click to expand...
Click to collapse
1-2 week [emoji33]
Upload your build please
championswimmer said:
I can upload a build for you. Would you use without a camera ?
We are waiting for camera. Should be coming in 1-2 weeks
Click to expand...
Click to collapse
Hey can your make a castor windy and castor ( z2 tablet lte and wifi) twrp build and post the commits for it here
Good to see back Champ!
Sent from my Xperia Z2 using Tapatalk
Can you upload this on mega or datafile host
CM13
I look forward to the CM 13 ROM, your work is always very good!
rcstar6696 said:
Hey can your make a castor windy and castor ( z2 tablet lte and wifi) twrp build and post the commits for it here
Click to expand...
Click to collapse
Sure will do that in the next week perhaps
Hi. Will this work for new bootloader for separate recovery partition?
timoti123 said:
Hi. Will this work for new bootloader for separate recovery partition?
Click to expand...
Click to collapse
Yes, it works
Sent from my D6503 using Tapatalk
flashable on previous twrp? doesn't it?
While you're at it, could you also include f2fs support? The official TWRP for Z2 Siruis somehow excluded it, even if the device works just fine with it.
3.0.0?
@championswimmer any plans for updating twrp?
Or better yet, what arguments did you use when compiling twrp to use the new recovery partition. I've only found instructions for use with the fotakernel. My googlefu is failing.
Sent from my D6503 using XDA-Developers mobile app
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Good Luck and looking forward
Nexus 4 ❤
#Malpa73 said:
Good Luck and looking forward
Nexus 4
Click to expand...
Click to collapse
thanks,i made the rom but i can t test it because i am really busy today iwill test it and upload it tomorrow
xEmre66 said:
thanks, i made the rom i'm now testing it it is on cm12 bootanimation i will upload it tomorrow !
Click to expand...
Click to collapse
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4 ❤
#Malpa73 said:
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4
Click to expand...
Click to collapse
It's Android 5.1.1. Yesterday I tried to Boot it Booted up. I tested it and it works but the camera doesn't work.
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
xEmre66 said:
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
Click to expand...
Click to collapse
I will write the link now when its uploaded on mediafire.
xEmre66 said:
I will write the link now when its uploaded on mediafire.
Click to expand...
Click to collapse
I uploaded it. you can download it
xEmre66 said:
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Click to expand...
Click to collapse
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
simokb1996 said:
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
Click to expand...
Click to collapse
+but i cant write there i need higher post count it says when i try that
xEmre66 said:
+but i cant write there i need higher post count it says when i try that
Click to expand...
Click to collapse
ah ok i interstand now
you build contains a lot of errors you just ported from pico
it does'nt build from source and it gave problems in recovery
because the recovery can handle just cm11 but the updater-script in cm12.1 need a cm12.1 recovery
recovery
How can I build a CM12.1 recovery? @simokb1996
recovery
How can I build a CM12.1 recovery? @simokb1996
xEmre66 said:
How can I build a CM12.1 recovery? @simokb1996
Click to expand...
Click to collapse
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
simokb1996 said:
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
Click to expand...
Click to collapse
My mini 2 is here from the repairing station and now i tested it it is booting now its on the bootanimation...
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
wiki3007 said:
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
Click to expand...
Click to collapse
@wiki3007 Yes, I know it. I will fix this soon and update the links. It gives always an error. What exactly is the error? Is it saying "error executing updater binary"???
Yes, that's error
Sent from my GT-S6500D using XDA Free mobile app
I think i fixed the rom. i cant test it because my mini 2 fall into water and now it is in rice for 2 days i test it after 1 week.........
Maybe you can test it and tell me... when my phone works i will build a fully working cm12.1..................................................................
i will upload it now
Fake cm12, this cm11 rom
Sent from my B1-730HD using XDA Free mobile app
Hi guys, good evening
Recently (4 days ago), I've flashed LineageOS 14.1 on my Xiaomi MI5. I've used the Global MIUI 8 for 4 months but I wanted to use Custom ROMs. I was in love with the LineageOS, everything was perfect, until I plugged my headphones (which worked on MIUI). The music was playing but no sound was coming through the headphones. The most awkward thing is that the headphones works when I'm calling someone. When I go to youtube via browser and play a video, the sound comes in. The problem is occurring with Spotify (the music plays without headphones, but when I plug in, no sound).
I tried flashing the RRemix 5.8.3 and the same problem occurred. I made a clean install (wiped everything via TWRP), installed the Micro GApps (tried with the Full GApps) but the problem still persists. The bluetooth works fine too.
hello! this is a firmware problem. flash 7.4.14, wipe cache&dalvik and you should be fine
beware: from next week on, the minimum firmware required to lineageos will be 7.7.6
it is buggy (no headphone sound) on last build though
download firmwares on this thread: https://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898
mlira1 said:
hello! this is a firmware problem. flash 7.4.14, wipe cache&dalvik and you should be fine
beware: from next week on, the minimum firmware required to lineageos will be 7.7.6
it is buggy (no headphone sound) on last build though
download firmwares on this thread: https://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898
Click to expand...
Click to collapse
Oh, thank you very much. So, I have to flash the 7.7.6 or the 7.4.14? Will it restore the headphone sound?
7.4.14, yes it will
no problem
it worked, thank you very much
If somebody looking for the solution for headphone bug with Lineage (and some minor bugs), this solution worked for me:
- Download latest MIUI version from Xiaomi. I prefer beta versions.
- On TWRP wipe dalvik and cache, DONT WIPE DATA!
- Install latest MIUI and wipe dalvik and cache after install! DONT WIPE DATA! Don't reboot.
- Come back to main screen of TWRP and install your Lineage again. Wipe dalvik and cache after install. DONT WIPE DATA again!
- Reboot and everything is fine!
Advantage: Your Lineage with all your configurations, apps and data still there, but fixed the headphone problem.
mlira1 said:
7.4.14, yes it will
no problem
Click to expand...
Click to collapse
Thank you mlire!
I've flashed the firmware 7.4.14 and it worked fine-
but i'm struggling to make work sometimes I need to plug the headphone many times for sound come out.
do you know if is there another fimware compatible with the latest LineageOS?
Thank you....
This worked for me like a charm only that I am on One Plus 5-- followed exact same steps but using OOS and then flashed Lineage 15.1 over it.
Thank you.
DroidCWB said:
If somebody looking for the solution for headphone bug with Lineage (and some minor bugs), this solution worked for me:
- Download latest MIUI version from Xiaomi. I prefer beta versions.
- On TWRP wipe dalvik and cache, DONT WIPE DATA!
- Install latest MIUI and wipe dalvik and cache after install! DONT WIPE DATA! Don't reboot.
- Come back to main screen of TWRP and install your Lineage again. Wipe dalvik and cache after install. DONT WIPE DATA again!
- Reboot and everything is fine!
Advantage: Your Lineage with all your configurations, apps and data still there, but fixed the headphone problem.
Click to expand...
Click to collapse
eprpalmeida said:
Oh, thank you very much. So, I have to flash the 7.7.6 or the 7.4.14? Will it restore the headphone sound?
Click to expand...
Click to collapse
Please does it work for all devices cos I am having the same problem?
---------- Post added at 11:04 AM ---------- Previous post was at 10:58 AM ----------
mlira1 said:
hello! this is a firmware problem. flash 7.4.14, wipe cache&dalvik and you should be fine
beware: from next week on, the minimum firmware required to lineageos will be 7.7.6
it is buggy (no headphone sound) on last build though
download firmwares on this thread: https://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898
Click to expand...
Click to collapse
Please does it work for all devices? Cos I'm having the same problem
Quami said:
Please does it work for all devices cos I am having the same problem?
---------- Post added at 11:04 AM ---------- Previous post was at 10:58 AM ----------
Please does it work for all devices? Cos I'm having the same problem
Click to expand...
Click to collapse
no, the firmware and rom is for gemini only. also, this problem happened on an old build. further ones fixed it.
mlira1 said:
no, the firmware and rom is for gemini only. also, this problem happened on an old build. further ones fixed it.
Click to expand...
Click to collapse
Ops so there's no way I can fix my own....if you've got any solution for me please help me
Quami said:
Ops so there's no way I can fix my own....if you've got any solution for me please help me
Click to expand...
Click to collapse
You didn't give much information. What's your device?
mlira1 said:
You didn't give much information. What's your device?
Click to expand...
Click to collapse
I use Samsung Galaxy S3 i747 (d2att) please
Quami said:
I use Samsung Galaxy S3 i747 (d2att) please
Click to expand...
Click to collapse
ask here: https://forum.xda-developers.com/galaxy-s3-att/development/lineage-14-1-d2att-rom-t3774764
mlira1 said:
ask here: https://forum.xda-developers.com/galaxy-s3-att/development/lineage-14-1-d2att-rom-t3774764
Click to expand...
Click to collapse
Ok thanks
Just Uninstall Audio Fx and Audio Jack will work as charm. For Uninstalling Audio FX your phone should be rooted and having any system app removing app which is easily available at Google Play