Database Develop

Brick

I'm on JB, just unlocked bootloader. I tryed many times to install cwm without succes, now my phone is bricked after i press on Root.bat, razr_i_boot was written and now i go bootloop on the BOOTLOADER UNLOCKED screen.
What i need to do please?
I need to install RSD and flash ICS then JB? Since i am allready on JB, i can flash directly JB rom?
If this is not the answer, please help me with that, how i can pas that brick? ((((((
I can see the fastboot menu (if this help)

It's enough to flash only the JB Files, ICS will brick your Phone completely.
In your case only the JB Boot.img is needed. You rooted with the ICS Exploit. On JB you have to root via CWM (RazriRoot2.zip)
Gesendet von meinem XT890 mit Tapatalk 2

Glad to see a quick answer, you save my day. Can you tell me please, from where i take only the JB Boot.img?

http://forum.xda-developers.com/showthread.php?p=41852698
Gesendet von meinem XT890 mit Tapatalk 2

Thanks alot HSD-Pilot, really thank you! Phone boot now, huh ..
Now i must to see how to install the cwm, every time its reboot on stock recovery.

Hmm, today i got another brick and i dont understand why and how to solve it!
I format system, cache and factory reset in hope to upgrade to Pi-llama Rom 1.4 rom.
After i restart phone, i am stuck at bootloader warning menu.
Fastboot menu i am able to see.
How i can solve this to skip the bootloader warning and power up the phone?
I tryed to put the JB boot.img but is same, stuck at bootloader warning image.

[Q] No ROM, only default recovery - what do?

Long story short, I factory reset my phone and replaced the recovery with stock. Now I can only get to fastboot or stock recovery. How do I flash AOKP again?!

There isnt a stock recovery..
So flashmode doesnt work?
Do you did a Nand backup?
Gesendet von meinem C6603 mit Tapatalk

Well I can get to either fastboot or the black screen with the android with the open belly.
No backup.

noodlesfordaddy said:
Well I can get to either fastboot or the black screen with the android with the open belly.
No backup.
Click to expand...
Click to collapse
Do you have solved your problem?
Tapatalk has problems.. Quote me next time thenn I will c it faster
Gesendet von meinem C6603 mit Tapatalk

Stuck in Bootscreen

Hi,
I have updated my firmware.
The details are:
Version-bootloader: 1.56.0000
Version-main: 4.06.1540.2
S-Off
I have installed ViperOne 4.3.0 using TWRP 2.6.3.3. However, I am stuck at the bootscreen for 15 mins. I have tried erasing cache but I am still stuck. Can anyone advise? Thank you!

Did you already try, to flash the ROM again?
And did you verify the md5 sum of the ROM.ZIP, before you flashed it?
I would try to flash the ROM again.
First without a wipe.
If it doesn't help, then flash it with a full wipe.
Gesendet von meinem HTC One mit Tapatalk

Black-FR said:
Did you already try, to flash the ROM again?
And did you verify the md5 sum of the ROM.ZIP, before you flashed it?
I would try to flash the ROM again.
First without a wipe.
If it doesn't help, then flash it with a full wipe.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Yup, I did all that. Verified md5. Reflashed the Rom without wiping and wiping.
This is so weird. Never had an issue.

You made any changes in the aroma installer?
If yes, then try it again, without any customization in the aroma installer.
Try to flash it, in the stock config.
Gesendet von meinem HTC One mit Tapatalk

Black-FR said:
You made any changes in the aroma installer?
If yes, then try it again, without any customization in the aroma installer.
Try to flash it, in the stock config.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Just tried this 15 mins ago. Stock config. Still stuck.
It can't be anything to do with my upgrade from 2.24 to 4.06, right?
I'm going to redownload the Rom again. Anyway, thanks for your help! Much appreciated. Please let me know if there are other ways.

RedDevil4Life said:
Hi,
I have updated my firmware.
The details are:
Version-bootloader: 1.56.0000
Version-main: 4.06.1540.2
S-Off
I have installed ViperOne 4.3.0 using TWRP 2.6.3.3. However, I am stuck at the bootscreen for 15 mins. I have tried erasing cache but I am still stuck. Can anyone advise? Thank you!
Click to expand...
Click to collapse
Have you tried force reboot (hold power button for 15-20 seconds)? It happened to me few times while the first boot after installation and it always helped.

Weird... Maybe flash the recovery again.
Should be quicker, then downloading the ROM.
I'm not sure if it helps but... Why not.
Gesendet von meinem HTC One mit Tapatalk

Black-FR said:
Weird... Maybe flash the recovery again.
Should be quicker, then downloading the ROM.
I'm not sure if it helps but... Why not.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Haha, in the end, I re-installed the recovery, re-downloaded the ROM and installed them. It's all fine now! Thanks alot of your help!

[Q] Note Stuck in Bootloop

Good evening,
I have a N7000 with Stock ROM 4.1.2 and the phone is rooted. Today after a periode of time I started the phone and it did the usual updated, including the Superuser.
After the update it freezed and in rebooted it pressing the power and home button. Ever since then I end up in a bootloop with reboots. I still can enter into recovery (Philz 6.0.3.1), however if I delete for example Dalvik cache the phone reboots (don't know if it ends the operation, or if it fails).
I am afraid that the bootloop is caused by the SU, however I am not sure.
I would need some advice, how the exit from the bootloop. Do I need to redo the rooting and install the SU?
Thanks for any suggestions.
:good:

Did you do a backup before?
gesendet mit Tapatalk

JulGer01 said:
Did you do a backup before?
gesendet mit Tapatalk
Click to expand...
Click to collapse
Yes, but it's XXLT4. I can't recall is that the latest 4.1.2?
2013-10-13.16.19.33_JZO54K.N7000XXLT4
Would that work?

If you did the backup in recovery, it should work... But I'm not that experienced either!
gesendet mit Tapatalk

OK, I would give it a try....later today. Maybe any other suggestions instead?
Can I reinstall SU in the recovery?

may be try this..
boot into recovery and make a nandroid backup, then choose clean before new rom install. After its completed restore the nandroid backup and see what happens.

nokiamodeln91 said:
may be try this..
boot into recovery and make a nandroid backup, then choose clean before new rom install. After its completed restore the nandroid backup and see what happens.
Click to expand...
Click to collapse
Thx. I did the backup, however as mentioned before it seems not to finish the operation and reboots instead. The date of the backup is shown as 2000-01-01...which looks quit wired to me. Time set in recovery is not ok either, but this might be due to taking off the battery earlier today.
I can try to restore my old backup but what would happen if it fails?

The date is not right because of the battery pull. Why does it not finish the backup? Any errors? Try an advanced backup of data partition only and see what happens.
If everything using recovery fails then you can use Odin method to flash a stock firmware..

nokiamodeln91 said:
The date is not right because of the battery pull. Why does it not finish the backup? Any errors? Try an advanced backup of data partition only and see what happens.
If everything using recovery fails then you can use Odin method to flash a stock firmware..
Click to expand...
Click to collapse
Flashing with ODIN was what I thought as well. Does it matter if I upgrade from N7000XXLT4 to N7000XXLT5?
Should I do a factory reset from recovery first?
Sorry for the dumb q's...
Thx.

you can factory reset and then install the rom.

Solved
JulGer01 said:
If you did the backup in recovery, it should work... But I'm not that experienced either!
gesendet mit Tapatalk
Click to expand...
Click to collapse
@JulGer01: Thanks indeed I used the Backup I had and restored as suggested. Every seems to be fine now. Thanks all for supporting.
@ all: ALWAYS DO NANDROID BACKUP...IT SAVES A LOT OF TIME WHEN EXPERIANCING ISSUES WITH THE PHONE!!!
:good:

Btw. On the 03.16.nightly even video recording is working again. Gets better and better! [emoji122][emoji146]
gesendet mit Tapatalk

rompip said:
Flashing with ODIN was what I thought as well. Does it matter if I upgrade from N7000XXLT4 to N7000XXLT5?
Should I do a factory reset from recovery first?
Sorry for the dumb q's...
Thx.
Click to expand...
Click to collapse
Here is an extract from Philz Recovery available at http://forum.xda-developers.com/showthread.php?t=1901191 that will help you with the confusion.
What kernel to choose:
The important part is the Kernel code:
XWLPX-NEE
Kernel code is in red (LPX), for this example, you need an LPX ROM. However, often, you can mix kernels when they are close: LPF kernel with LPG ROM...
NEE code doesn't matter at all, I add it for reference. It is the CSC
XW: mixed, often doesn't matter for close regions. For example, XW and XX are often interchangeable. However, mixing a BU with an XW ROM or inversly, sometimes works, but often ends in a bootloop. In that case, either boot into recovery or download mode to reflash
Click to expand...
Click to collapse
Anything with N7000X-LT- will work fine, the latest rom is XXLTC, which you can get from samfirmware.com.

Brick phone

Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me

Please, anyone can help me, i`ve been 3 days long seeing tutorials but I can´t find what I´m doing wrong.

Flash a full firmware whit partition.

h4xt0r said:
Flash a full firmware whit partition.
Click to expand...
Click to collapse
By full firmware you mean the one file or the multi file?
Thank´s for the help

Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.

elamoroso said:
Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.
Click to expand...
Click to collapse
You must use a older version of Odin. I use a Odin version from here http://forum.xda-developers.com/showthread.php?t=2609021. And try to use another cable.

Hi JanniekM00, and thank´s for the help, but the ODIN version in that page that you said is newer than mine. It is the V4.42. I tried it to but no luck. I tried with a diferente usb cable, one file and multi-file but nothing.
The version of android installed in phone before it as bricked was FROYO.
I am trying with GINGERBREAD roms. Can that be the problem?
I wanted to try with a FROYO rom but I can´t find anywere.

elamoroso said:
Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me
Click to expand...
Click to collapse
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!

Viper The Ripper said:
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!
Click to expand...
Click to collapse
Hi Viper, I mean that after ODIN restart phone to install firmware, it restart but blinking, light on and off, on and off, and to stop I have to take out the batterie.

Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk

YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Can you tell me how to install a custom recovery step by step. Thank´s a lot. I reed a tutorial to install cwm recovery but in tutorial says to put file in sd card but after I don´t know how to chose the file because phone only goes to downloding mode.

addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Gesendet von meinem GT-I9300 mit Tapatalk
---------- Post added at 12:45 PM ---------- Previous post was at 12:42 PM ----------
You must read the manual method
Gesendet von meinem GT-I9300 mit Tapatalk

YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Our problem is there's NO a secure way to back up/restore IMEI partition, so you can corrupt the partition when you try it