Long story short, I factory reset my phone and replaced the recovery with stock. Now I can only get to fastboot or stock recovery. How do I flash AOKP again?!
There isnt a stock recovery..
So flashmode doesnt work?
Do you did a Nand backup?
Gesendet von meinem C6603 mit Tapatalk
Well I can get to either fastboot or the black screen with the android with the open belly.
No backup.
noodlesfordaddy said:
Well I can get to either fastboot or the black screen with the android with the open belly.
No backup.
Click to expand...
Click to collapse
Do you have solved your problem?
Tapatalk has problems.. Quote me next time thenn I will c it faster
Gesendet von meinem C6603 mit Tapatalk
hey all
i'm using 757 version but when i want to install the new firmware or other in twrp i'm getting "E: unable to mount/system" error. then in mount option i can't tick system. how i correct this problem?
thanks
LiberOz said:
hey all
i'm using 757 version but when i want to install the new firmware or other in twrp i'm getting "E: unable to mount/system" error. then in mount option i can't tick system. how i correct this problem?
thanks
Click to expand...
Click to collapse
You should wipe all that's possible (factory reset etc.) and do new install. Backup before! Downgrade to other firmware like .257 and then root.
Gesendet von meinem Xperia Z1 mit Tapatalk
Or, just use CMW instead...no need to wipe...
gregbradley said:
Or, just use CMW instead...no need to wipe...
Click to expand...
Click to collapse
I had this bug too. I had it in twrp and cwm.
Gesendet von meinem Xperia Z1 mit Tapatalk
Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me
Please, anyone can help me, i`ve been 3 days long seeing tutorials but I can´t find what I´m doing wrong.
Flash a full firmware whit partition.
h4xt0r said:
Flash a full firmware whit partition.
Click to expand...
Click to collapse
By full firmware you mean the one file or the multi file?
Thank´s for the help
Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.
elamoroso said:
Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.
Click to expand...
Click to collapse
You must use a older version of Odin. I use a Odin version from here http://forum.xda-developers.com/showthread.php?t=2609021. And try to use another cable.
Hi JanniekM00, and thank´s for the help, but the ODIN version in that page that you said is newer than mine. It is the V4.42. I tried it to but no luck. I tried with a diferente usb cable, one file and multi-file but nothing.
The version of android installed in phone before it as bricked was FROYO.
I am trying with GINGERBREAD roms. Can that be the problem?
I wanted to try with a FROYO rom but I can´t find anywere.
elamoroso said:
Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me
Click to expand...
Click to collapse
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!
Viper The Ripper said:
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!
Click to expand...
Click to collapse
Hi Viper, I mean that after ODIN restart phone to install firmware, it restart but blinking, light on and off, on and off, and to stop I have to take out the batterie.
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Can you tell me how to install a custom recovery step by step. Thank´s a lot. I reed a tutorial to install cwm recovery but in tutorial says to put file in sd card but after I don´t know how to chose the file because phone only goes to downloding mode.
addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Gesendet von meinem GT-I9300 mit Tapatalk
---------- Post added at 12:45 PM ---------- Previous post was at 12:42 PM ----------
You must read the manual method
Gesendet von meinem GT-I9300 mit Tapatalk
YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Our problem is there's NO a secure way to back up/restore IMEI partition, so you can corrupt the partition when you try it
Hello.
My phone is a SM-G903F with an android version of 6.0.1 and with an architecture of armeabi-v7a.
I have a problem because when I try to install the TWRP tar file (dl.twrp.me/s5neolte/) through ODIN it all goes perfectly well, I install it in the download mode and after installing it, it automatically resets but when I now open the recovery mode it goes in the stock recovery mode and not the TWRP recovery mode.
I basically follow exactly the instructions in this video youtube.com/watch?v=3-lwdZhdZWM but I always end up in the stock recovery mode.
Can anyone help me or suggest anything I can do?
Thank you very much,
Enrique
You have to unselect auto-reboot, shut down your phone (or remove the battery) after flashing TWRP and then manually boot into recovery.
Gesendet von meinem SM-T705 mit Tapatalk
nunein said:
You have to unselect auto-reboot, shut down your phone (or remove the battery) after flashing TWRP and then manually boot into recovery.
Gesendet von meinem SM-T705 mit Tapatalk
Click to expand...
Click to collapse
This solved it.
Thank you very much,
Enrique
filix92 said:
This solved it.
Thank you very much,
Enrique
Click to expand...
Click to collapse
You're welcome. And please click at the 'Thanks' button instead of writing your 'thanks'
I'm unable to install the battery care App from Sony. I accidently deleted it and now I can download the apk, got asked to install it but it always fails. Any clue?
I have Android 10 running on my phone.
Gesendet von meinem H8266 mit Tapatalk
memphis77 said:
I'm unable to install the battery care App from Sony. I accidently deleted it and now I can download the apk, got asked to install it but it always fails. Any clue?
I have Android 10 running on my phone.
Gesendet von meinem H8266 mit Tapatalk
Click to expand...
Click to collapse
If the app was part of the system, please flash the stock system partition again
flash a complete stock rom or just the system partition?
How to flash just the system partition?
memphis77 said:
flash a complete stock rom or just the system partition?
How to flash just the system partition?
Click to expand...
Click to collapse
Just put the system.sin and newflasher into a folder