Related
I am very new to this forum. Recentely I have purchased GNote - Indian version. This is my first Android device.
Installed firmware / stocke ROM details as below:
Baseband Version: N7000DDKL1
Kernel Version: 2.6.35.7-N7000XXKL3-CL793489 [email protected]#2
Build Number: GINGERBREAD.XXL3
I think above is the latest / updated firmware / stock ROM available for Indian GNote.
I want to update it to the latest / stable firmware / stock ROM version (I don't want rooting). Can someone please guide me by providing step by step details?
Thanks in advance
Sent from my GT-N7000 using xda premium
http://forum.xda-developers.com/showthread.php?t=1424997
If you want custom rom then you need root, otherwise you hav to use pc odin, which will raise flash counter n you will lose warranty, n that needs JIG hardware to reset.
You have option to flash any stock ROM, above said link is best choice to download stock ROM. You will find installation guide on same thread, post #2 n 3.
Btw i m in india n using latest German ROM la4 n is much stable.
Sent from my GT-N7000 using xda premium
Hi Dr. Ketan. Thanks for your reply. I don't want to lose warranty and I don't want to rooting the device. I want to install latest stable samsung official stock ROM which may be available in another country. In that scenario what will be the recommended steps?
rahool_26 said:
Hi Dr. Ketan. Thanks for your reply. I don't want to lose warranty and I don't want to rooting the device. I want to install latest stable samsung official stock ROM which may be available in another country. In that scenario what will be the recommended steps?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997
Install Latest version of Kies.
download the Stock ROM from the above link (i prefer LA4)
extract it and you ll find one .md5 file
download Odin from same link
attach downloaded .md5 file to PDA tab
in Odin make sure Re-Partition is UN-ticked and do not select any pit file. rest of them let it be.
now turn off your device
restart in download mode by pressing Volume down + home + Power after that just press volume up to confirm download mode
connect Device to PC via data cable (now you can see yellow block in Odin)
now press Start and wait for complete boot.
Thats it....
(Flashing this ROM will not erase any DATA)
rahool_26 said:
Hi Dr. Ketan. Thanks for your reply. I don't want to lose warranty and I don't want to rooting the device. I want to install latest stable samsung official stock ROM which may be available in another country. In that scenario what will be the recommended steps?
Click to expand...
Click to collapse
In that case also, you can have XXLA4 german ROM, which counts as most stable stock ROM.
Ranjan.alva have gave you a link, just above this post, follow it, you can get installation guide, How to flash ROM with odin on same thread post#2
EDIT : Ranjan have already edited his post n made easy for you. just follow it. still you have any doubt, you will get image guide on same thread post # 2
Thanks a lot both of you. Now I have one question if I upgrade to XXLA4 German ROM weather I will get future update (like ICS) via OTA? Or every time I need to install updated firmware via KIES or Odin?
And after upgrading to XXLA4 german ROM if I want to go back to the earlier stock ROM (XXL3) which already installed how can I do that?
rahool_26 said:
Thanks a lot both of you. Now I have one question if I upgrade to XXLA4 German ROM weather I will get future update (like ICS) via OTA? Or every time I need to install updated firmware via KIES or Odin?
And after upgrading to XXLA4 german ROM if I want to go back to the earlier stock ROM (XXL3) which already installed how can I do that?
Click to expand...
Click to collapse
M posting new guide in evening about how to update rom, stay tuned to my development section thread ' how to root ....'
If you install LA4, you wont get update over OTA or even with Kies, you have to update it with odin.
The way which you will update la4, same way with odin you can revert back to xxkl3
Sent from my GT-N7000 using xda premium
Hi all,
I've tried searching the forums but unfortunately my search did not turn up anything that specifically addressed how to tackle my problem. I'm generally quite bad with computers/phones/etc., and unfortunately my first attempt at rooting my phone didn't work out. My husband isn't good with phones either. It got stuck in a boot loop and I had to flash a factory firmware to recover the use of my phone, which took me a few hours to understand and perform. (All the data however was wiped, but thankfully I had backed my data up beforehand).
I am still interested in rooting my device, but am now afraid that I will screw it up again. I was hoping someone could please help me out as I do not want to permanently damage or lose all my phone's data again. Here are the details of my phone, please let me know what I need in order to root it. I will provide any other information necessary.
Model: GT-I9000
Firmware version: 2.2.1
Baseband version: I9000ZSJPG
Kernel version: 2.6.32.9
[email protected] #5
Build number: FROYO.ZSJPG
Thank you for any help provided. I would really appreciate a step by step guide if possible, because I'm so inept at dealing with these matters, and unfortunately my husband isn't much help either. Thanks all.
U need to update to the latest versoin available in your country...
If it is 2.3.6 then u can root it using odin3_v1.0
U can find a full proof guide for 2.3.6..just google it...
If u dont have 2.3.6 then also google it..download and flash it...and then root it...
Cheers
Sent from my GT-I9000 using xda app-developers app
tchindalia said:
U need to update to the latest versoin available in your country...
If it is 2.3.6 then u can root it using odin3_v1.0
U can find a full proof guide for 2.3.6..just google it...
If u dont have 2.3.6 then also google it..download and flash it...and then root it...
Cheers
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Thank you for your reply. I tried flashing to 2.3.6 using odin3v_1.7 but I got the same problem with a boot loop again! I have flashed back to the factory firmware again, and am back at square one. I'm really not sure what I'm doing wrong. Thank you for your reply though.
Excalipoors said:
I'm really not sure what I'm doing wrong. Thank you for your reply though.
Click to expand...
Click to collapse
If you are still on 2.2 .1 just connect it to KIES http://www.4shared.com/file/rcHB94q3/Kies_23212064_10_1.html and let it update it for you..IF it works without any problems.
or else you may have failed to Format your SD card and factory reset before flashing using odin and also do a wipe after flashing in recovery mode.
or you may have ticked repartition in Odin? that cause the boot loop
Excalipoors said:
Hi,
Thank you for your reply. I tried flashing to 2.3.6 using odin3v_1.7 but I got the same problem with a boot loop again! I have flashed back to the factory firmware again, and am back at square one. I'm really not sure what I'm doing wrong. Thank you for your reply though.
Click to expand...
Click to collapse
hey
try using odin3_v1.0 and not v1.7...thats what i preffer...
plus you can go through the guide available here link:
1.To ROOT
http://www.androidauthority.com/root-galaxy-s-gt-i9000-android-2-3-6-xxjvu-48441/
2.Update to 2.3.6
http://www.androidauthority.com/and...d-value-pack-samsung-galaxy-s-gt-i9000-44229/
cheers
Working trying, very simple steps to:
To Move to GB [Retaining the warranty]: https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
To Root: https://www.fixmystuff.in/FMS_Forum...-i9000-rooting-gt-i9000-2-3-3-india-ddjv9.47/
To Install ICS [4.0.4]: https://www.fixmystuff.in/FMS_Forum...wich-4-0-4-in-samsung-galaxy-s-g-t-i9000.125/
Thank you very much everyone! I really appreciate all the suggestions, will try them all out later tonight and let you guys know how it worked out.
You guys are awesome. =)
If you want to root GB, any version, use superoneclick. Works great, but you wont have a custom recovery that can flash update.zips. Or you could just flash a rooted kernel via odin so you get cwm and other features such as bln, cpu scaling etc. Also if you want to go to ics, flash an ics kernel, boot into recovery flash any ics rom and your good to go.
Good Luck!
Hi,
Personally I flash a Darkyrom GB ROM (you can find it on his website). Best part about it is you dont need to be rooted to flash his ROM. Try searching for 10.2 RE JVU on his website. All you need is a .tar file and flash it via odin. I think TotallydubbeHD has a video tutorial on youtube as well.
Trust me, its safe. I have flashed it countless of times
Thank you so much everyone! It finally worked! Everyone has been such a great help, thank you so much everyone. <3
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
JB_ said:
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
Click to expand...
Click to collapse
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
glevitan said:
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
JB_ said:
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
Click to expand...
Click to collapse
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
glevitan said:
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
Click to expand...
Click to collapse
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
JB_ said:
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
Click to expand...
Click to collapse
If your plan is to update to JB you can do that straight foward and then root by flashing philz kernel. That is way easy.
Thanks guys for everything!
Sent from my GT-N7000 using xda app-developers app
Hello everyone,
For the past week i have been messing around with different kernels on my HTC One 4.2.2 running the Stock ROM. I have tried a couple of different kernels and although they do provide a fun experience, especially with overclocking and what not, i would like to return to the Stock kernel. I have tried to find out how to do that but i haven't reached a conclusion.
At the moment the problem is that i cannot find the stock kernel.
I have heard something about pulling the stock kernel from a full download of the stock ROM, but to be completely honest, im not all too sure about how to do that, and I don't want to make a stupid decision and end up bricking my device.
So, can someone please tell me where or how i can get the stock kernel for the HTC One 4.2.2 Stock ROM?
If there are any special ways to flash the kernel that would be great. (As far as i know just flashing it through the custom recovery works fine)
Thanks
Youssef26500 said:
Hello everyone,
For the past week i have been messing around with different kernels on my HTC One 4.2.2 running the Stock ROM. I have tried a couple of different kernels and although they do provide a fun experience, especially with overclocking and what not, i would like to return to the Stock kernel. I have tried to find out how to do that but i haven't reached a conclusion.
At the moment the problem is that i cannot find the stock kernel.
I have heard something about pulling the stock kernel from a full download of the stock ROM, but to be completely honest, im not all too sure about how to do that, and I don't want to make a stupid decision and end up bricking my device.
So, can someone please tell me where or how i can get the stock kernel for the HTC One 4.2.2 Stock ROM?
If there are any special ways to flash the kernel that would be great. (As far as i know just flashing it through the custom recovery works fine)
Thanks
Click to expand...
Click to collapse
I have that on my DB but I can't post links, cuz I'm new member :/
Fataldose said:
I have that on my DB but I can't post links, cuz I'm new member :/
Click to expand...
Click to collapse
Hey,
I had a quick look at the link you sent me through the pm, and I think you may have sent me the stock recovery, while I am after the stock kernel.
From what i've seen the kernel should be a .zip file, while the file in the link you sent to me was a .img.
Thanks though, but I am after the stock kernel and not the stock recovery.
Thanks
Youssef26500 said:
Hey,
I had a quick look at the link you sent me through the pm, and I think you may have sent me the stock recovery, while I am after the stock kernel.
From what i've seen the kernel should be a .zip file, while the file in the link you sent to me was a .img.
Thanks though, but I am after the stock kernel and not the stock recovery.
Thanks
Click to expand...
Click to collapse
Opps! Sorry bro, that's my fault.
I thought you did want stock recovery..
Any ideas guys?
Youssef26500 said:
Any ideas guys?
Click to expand...
Click to collapse
You can extract the stock kernel from the stock ROM found here: http://forum.xda-developers.com/showthread.php?t=2224752
it's based on:
Code:
HTC update build 2.24.401.8
Android Jelly Bean 4.2.2 (JDQ39)
HTC Sense 5.0
Release status: release-keys
Kernel: 3.4.10
EDIT: I just saw that part
I have heard something about pulling the stock kernel from a full download of the stock ROM, but to be completely honest, im not all too sure about how to do that, and I don't want to make a stupid decision and end up bricking my device.
Click to expand...
Click to collapse
What version are you running 2.xx.xxx.x?
I'll extract the kernel for you.
nkk71 said:
You can extract the stock kernel from the stock ROM found here: http://forum.xda-developers.com/showthread.php?t=2224752
it's based on:
Code:
HTC update build 2.24.401.8
Android Jelly Bean 4.2.2 (JDQ39)
HTC Sense 5.0
Release status: release-keys
Kernel: 3.4.10
EDIT: I just saw that part
What version are you running 2.xx.xxx.x?
I'll extract the kernel for you.
Click to expand...
Click to collapse
Hey,
Thank you for the offer.
Anyway, I checked under Software information it showed that i am running software number 2.24.980.2
As you know, its the stock ROM and it's running 4.2.2
Thank you.
Hi.
I have the same problem, I used custom kernel but now I would like to revert to stock kernel , I have the the HTC one pn07110. Has somebody the stock kernel for this device with Android jb 4.2.2 ?
I really appreciate any help. Thanks
Sent from my HTC One using xda app-developers app
Youssef26500 said:
Hey,
Thank you for the offer.
Anyway, I checked under Software information it showed that i am running software number 2.24.980.2
As you know, its the stock ROM and it's running 4.2.2
Thank you.
Click to expand...
Click to collapse
Here you go:
boot_2.24.401.1.img (5.6 MB)
https://mega.co.nz/#!LIFiEB4B!Lew17C0NiEnJkMPc0IDPF0QV6uk49Cg7hoJ0A-k8AiU
MD5: bfc4f2857b1479eb5a1d477485bea051
- OR -
boot_HTC__039_2.24.980.2.img (16.0 MB)
https://mega.co.nz/#!bIdl0ZbR!YiN85xoMOX2_0DxvfzQStlZtqCtOuixHrzkMjQ2sfqA
MD5: 85e588984e926a2f49547e5f0f5d7757
The first was extracted from the stock ROM of 2.24.401.1 and the second extracted from a CWM backup I found of HTC__039 v2.24.980.2. You can use either one, they will both give you kernel v3.4.10-g445d072
I've uploaded both, because I wasn't sure if the CWM backup was completely stock or not.
These are img files, so you have to flash them using fastboot:
fastboot flash boot boot_2.24.401.1.img
or
fastboot flash boot boot_HTC__039_2.24.980.2.img
Just to put your mind at ease, I flashed both on my phone to test, and both passed with flying colours
The details of the img files:
boot_2.24.401.1.img
Code:
3.4.10-g445d072
[email protected] #1
SMP PREEMPT
boot_HTC__039_2.24.980.2.img
Code:
3.4.10-g445d072
[email protected] #1
SMP PREEMPT
PS: I recommend a nandroid backup, just in case.
---------- Post added at 01:37 PM ---------- Previous post was at 01:33 PM ----------
sandrivl said:
Hi.
I have the same problem, I used custom kernel but now I would like to revert to stock kernel , I have the the HTC one pn07110. Has somebody the stock kernel for this device with Android jb 4.2.2 ?
I really appreciate any help. Thanks
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Need to know your version number 2.24.xxx.x also??
nkk71 said:
Here you go:
boot_2.24.401.1.img (5.6 MB)
https://mega.co.nz/#!LIFiEB4B!Lew17C0NiEnJkMPc0IDPF0QV6uk49Cg7hoJ0A-k8AiU
MD5: bfc4f2857b1479eb5a1d477485bea051
- OR -
boot_HTC__039_2.24.980.2.img (16.0 MB)
https://mega.co.nz/#!bIdl0ZbR!YiN85xoMOX2_0DxvfzQStlZtqCtOuixHrzkMjQ2sfqA
MD5: 85e588984e926a2f49547e5f0f5d7757
The first was extracted from the stock ROM of 2.24.401.1 and the second extracted from a CWM backup I found of HTC__039 v2.24.980.2. You can use either one, they will both give you kernel v3.4.10-g445d072
I've uploaded both, because I wasn't sure if the CWM backup was completely stock or not.
These are img files, so you have to flash them using fastboot:
fastboot flash boot boot_2.24.401.1.img
or
fastboot flash boot boot_HTC__039_2.24.980.2.img
Just to put your mind at ease, I flashed both on my phone to test, and both passed with flying colours
The details of the img files:
boot_2.24.401.1.img
Code:
3.4.10-g445d072
[email protected] #1
SMP PREEMPT
boot_HTC__039_2.24.980.2.img
Code:
3.4.10-g445d072
[email protected] #1
SMP PREEMPT
PS: I recommend a nandroid backup, just in case.
Click to expand...
Click to collapse
Thank you
I flashed the first one through fastboot and it worked like a charm. Thank you very much!
Youssef26500 said:
Thank you
I flashed the first one through fastboot and it worked like a charm. Thank you very much!
Click to expand...
Click to collapse
No problem :good:
Need Stock Kernel too
hi there,
i want to update the newest OTA, but ich use the elementaryX kernel (tap2wake, you know )
i already reverted to stock recovery, but my update just doesn´t work...
now someone in another forum told me i have to use the stock kernel, too
can someone provide me the stock kernel for my m7ul version 4.19.401.9?
thanks in advance
chuckbert
chuckbert said:
hi there,
i want to update the newest OTA, but ich use the elementaryX kernel (tap2wake, you know )
i already reverted to stock recovery, but my update just doesn´t work...
now someone in another forum told me i have to use the stock kernel, too
can someone provide me the stock kernel for my m7ul version 4.19.401.9?
thanks in advance
chuckbert
Click to expand...
Click to collapse
Though I don't think that's the problem, but here you go:
fastboot flash boot boot_4.19.401.9.img
It's probably something else that is not allowing the OTA, what kind of error do you get?
nkk71 said:
Though I don't think that's the problem, but here you go:
fastboot flash boot boot_4.19.401.9.img
It's probably something else that is not allowing the OTA, what kind of error do you get?
Click to expand...
Click to collapse
wow, that was fast! thanx!
i got the error: "ansi_cprng.ko has unexpected contents" when verifying the system status...
does that mean something to you?
chuckbert said:
wow, that was fast! thanx!
i got the error: "ansi_cprng.ko has unexpected contents" when verifying the system status...
does that mean something to you?
Click to expand...
Click to collapse
it means the file isn't 100% stock, and therefore the OTA cannot proceed.
As an example, the updater script from 3.62.401.1 to 4.19.401.8 has this:
Code:
set_progress(0.509804);
apply_patch_check("/system/lib/modules/ansi_cprng.ko", "44015172e4f2d836a602b873f6ad4ea428ecd0eb", "46d3269597bfaac74ed9be80c39f49ca1b1ececb") || abort("\"/system/lib/modules/ansi_cprng.ko\" has unexpected contents.");
so at about 50% of the system checks, it is checking the file you mentioned, and finds it has a different SHA-1 hash than what it expects. (this file was probably changed by the custom kernel, as well as other files)
so you need to set all modified files back to 100% stock.
I guess there are two possible ways:
1- if you have a 100% stock nandroid backup before installing custom kernel, restore that
2- find a stock 4.19.401.9 ROM, and flash it.
nkk71 said:
it means the file isn't 100% stock, and therefore the OTA cannot proceed.
As an example, the updater script from 3.62.401.1 to 4.19.401.8 has this:
Code:
set_progress(0.509804);
apply_patch_check("/system/lib/modules/ansi_cprng.ko", "44015172e4f2d836a602b873f6ad4ea428ecd0eb", "46d3269597bfaac74ed9be80c39f49ca1b1ececb") || abort("\"/system/lib/modules/ansi_cprng.ko\" has unexpected contents.");
so at about 50% of the system checks, it is checking the file you mentioned, and finds it has a different SHA-1 hash than what it expects. (this file was probably changed by the custom kernel, as well as other files)
so you need to set all modified files back to 100% stock.
I guess there are two possible ways:
1- if you have a 100% stock nandroid backup before installing custom kernel, restore that
2- find a stock 4.19.401.9 ROM, and flash it.
Click to expand...
Click to collapse
does that mean reinstalling the stock kernel will not work?
or is there a chance it will work after installing the kernel?
btw: how do i install the .img file you postet? via fastboot?
chuckbert said:
does that mean reinstalling the stock kernel will not work?
or is there a chance it will work after installing the kernel?
btw: how do i install the .img file you postet? via fastboot?
Click to expand...
Click to collapse
No chance it will work, zero!!
I just had a look at ElementalX, and it changes a lot of files!
so the above two options are the only ones you have if you want to take the OTA.
nkk71 said:
No chance it will work, zero!!
I just had a look at ElementalX, and it changes a lot of files!
so the above two options are the only ones you have if you want to take the OTA.
Click to expand...
Click to collapse
ok, thank you very much for your help, i really appreciate that!:good:
chuckbert said:
ok, thank you very much for your help, i really appreciate that!:good:
Click to expand...
Click to collapse
sure, no problem
I have looked everywhere on this site and online that I can think of and no one has to download the for stock kernel for the N910T 5.1.1 Lollipop [DOK2] ROM/firmware that came out a long time ago. Does anyone on here have it and can post a link so that I can download it? I need to for a setup I am building on my phone and I have everything I need except it. I wasted the whole weekend looking for it so if anyone can help me out I would greatly appreciate it. I figure that someone has it on their PC from a long time ago. I use TWRP if that helps. Just looking for the kernel in a .zip format so I can flash it in TWRP. I tried to figure out how to extract it, but all I have is a stock.img.tar ROM with no way of extracting a kernel that works with the knowledge I have.
Anyways, I would greatly appreciate it and this thread and another copy of it I will post in android development are my last available effort to find the 5.1.1 DOK2 stock kernel.
THANKS IN ADVANCE!
Dolphinwigs said:
I have looked everywhere on this site and online that I can think of and no one has to download the for stock kernel for the N910T 5.1.1 Lollipop [DOK2] ROM/firmware that came out a long time ago. Does anyone on here have it and can post a link so that I can download it? I need to for a setup I am building on my phone and I have everything I need except it. I wasted the whole weekend looking for it so if anyone can help me out I would greatly appreciate it. I figure that someone has it on their PC from a long time ago. I use TWRP if that helps. Just looking for the kernel in a .zip format so I can flash it in TWRP. I tried to figure out how to extract it, but all I have is a stock.img.tar ROM with no way of extracting a kernel that works with the knowledge I have.
Anyways, I would greatly appreciate it and this thread and another copy of it I will post in android development are my last available effort to find the 5.1.1 DOK2 stock kernel.
THANKS IN ADVANCE!
Click to expand...
Click to collapse
Here you go "DOK2" stock touchwiz kernel TWRP flashable zip.
https://mega.nz/#!udFXHTJK!ThUi45Vkhm1tIoT8WGFE13g8m640OHIje4q7nnD4DoU
DOK2 Stock Kernel - Thank you!
Trex888 said:
Here you go "DOK2" stock touchwiz kernel TWRP flashable zip.
https://mega.nz/#!udFXHTJK!ThUi45Vkhm1tIoT8WGFE13g8m640OHIje4q7nnD4DoU
Click to expand...
Click to collapse
Thank you! Much appreciated. I wish I knew of a place where someone kept a repository of all of the stock roms/images, kernels, modems, bootloaders, etc... for each phone. Getting hard to find that kind of stuff now. All the links are dead in old posts. If anyone knows of a place like that please post here and let me know! Also anyone know how I can get this stuff from a .img.tar stock rom file myself? I looked around and couldn't find a way to do it that worked when I was trying to find the stock kernel for this.
Thanks again!
Can't find Unmodified Stock Image of DOK2
The only one I was able to find on here without a dead link was an already deodexed on. Anyone have one I could download from you?