Database Develop

I need help!

I'm in no way new to Android been around since the g1 era. I basically need help with installing a rom on my T-Mobile gtab. I've had my tab for over a year and I finally decided to root it last week. The problem I'm having is trying to load a custom rom onto it. Is there another way other than Odin that can be used or can I just download the roms and go straight to cwm and flash?
FIREbreathing FLAMEshootingG2X

I have tried to do this several times in my own and my desktop will not let me extract the files that I need to do this on my own... just wanted to know if there was another way to put a from on my tab! Any help would be greatly appreciated.
FIREbreathing FLAMEshootingG2X

king870 said:
I have tried to do this several times in my own and my desktop will not let me extract the files that I need to do this on my own... just wanted to know if there was another way to put a from on my tab! Any help would be greatly appreciated.
FIREbreathing FLAMEshootingG2X
Click to expand...
Click to collapse
Yes you can install ROM from CWM, depends on which ROM you try to flash. Just find all the ROM at the Development section and choose the files with .zip. They usually are flashable from CWM.
for example, this rom is for GSM and are flashable through CWM:
http://forum.xda-developers.com/showthread.php?t=1497872
or if you are ready from ICSm you can also try this:
http://forum.xda-developers.com/showthread.php?t=1385153
Those provide .tar usually flashable with ODIN.
If you decide flashing using ODIN, you have to make sure that you connect you G-tab to Samsung Kies first before trying to use ODIN. (To make sure you have the correct Samsung Driver installed to your usb port connection).
I hope that helps. Please make a note, if you are upgrading from FROYO to Gingerbread, you probably need to flash new PIT file, and probably datadb.rfs as well. These files, I'll recommend to flash them using ODIN.
Good luck, and be careful not to soft-brick your G-Tab.

Since you have T-mobile tab like me,
I think your best bet will be going to Overcome ROM thread.
http://forum.xda-developers.com/showthread.php?t=1317384
Re-stock to Stock Safe 5 and then flash their kernel (all via Odin).
And from there you can CWM flash almost any ROM
Overcome website has broken images.
You can check this
http://forum.xda-developers.com/showpost.php?p=20974872&postcount=681

I just wanted to tell you guys thanks for the help...I'm running AOKP at the moment!
FIREbreathing FLAMEshootingG2X

[Q] Pls HELP!!

Hey guys i really need some help. I tried to install clockworkmod on my T-mobile samsung galaxy s (sgh-t959v) and i guess i bricked it. All that comes out on the screen is a phone and a computer. can someone pls tell me what to do to fix this and install the right way.
Thank you in advance

Fairly new to all this myself and don't have experience with T-Mobile but if you go here you should be able to get a Firmware for your phone: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T959V&r=5#regiona
You should be able to download a stock firmware, odin & everything else you need to flash your stock firmware. From this site.
Perhaps wait and see other responses though as there maybe a way to fix without flashing a stock firmware. Also getting some info from someone with your phone on T-Mobile may be better.

scubadude said:
Fairly new to all this myself and don't have experience with T-Mobile but if you go here you should be able to get a Firmware for your phone: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T959V&r=5#regiona
You should be able to download a stock firmware, odin & everything else you need to flash your stock firmware. From this site.
Perhaps wait and see other responses though as there maybe a way to fix without flashing a stock firmware. Also getting some info from someone with your phone on T-Mobile may be better.
Click to expand...
Click to collapse
Just confirming that what scubadude said above. Flash new firmware, it is a soft-brick and therefore recoverable. Something that needs to be added however is that you will need to make a login in-order to access the direct link. If the link still doesn't work after that then click firmware and follow on from there..

Please help me revert back to stock rom! I've read guides but I need more help!

Hey guys I'm in a bit of a pickle.
I have a Samsung Galaxy Tab 8.9 WIFI/3G (Model GT-P7300 I think).
I somehow managed to install Overcome ROM on it when I first got it. Now I want to give it to my Dad and I would like to revert everything back to factory default stock and all. I'm not sure what a Kernal is and not sure if I need to revert that too but probably.
How do I best go about this? I am having much difficulty understanding from googling and reading forum posts and I am not familiar with the acronyms and lingo the community uses. Would you be so kind to please explain to me step-by-step detailed as if I was a child lol
Please link me to everything I need to download!
Oh and another thing: I bought this tab in Asia so it has English and other Asian languages installed. Can I install a different language ROM for my Dad? (I think he prefers Swedish). Will it be locked to any providers or anything?
Thank you very much in advance. I really need help with this

Here's the stock unbranded firmware for Nordic countries
Here's the branded firmware for Telia (couldn't find any other carrier branded for Sweden
Then just flash using Odin, that will wipe everything though, but you'll be back to stock

I don't understand how to flash with Odin .. I don't even know what Odin is! Please give me super simple instructions
I downloaded the firmware file and I put it on my tablet's SD card. I rebooted into Recovery mode and I try to apply the update from the ZIP file. But it says it cannot Open it?! What am I doing wrong?

All is explained in this post here, that is stickied at the top of this section

overome is quite a standard rom with features that are not really seen... the look is stock... I don't see a reason to revert back...

Thanks guys, I successfully flashed with Odin and I think it was a success. You have been very helpful.
But I am still not sure if 100% everything is set to default stock in case of a future warranty claim. Is there anything else I should do? Do I need to install stock Recovery as well?
Thanks again.

mikey8080 said:
Thanks guys, I successfully flashed with Odin and I think it was a success. You have been very helpful.
But I am still not sure if 100% everything is set to default stock in case of a future warranty claim. Is there anything else I should do? Do I need to install stock Recovery as well?
Thanks again.
Click to expand...
Click to collapse
If you used Odin and one of the stock firmwares then it should have flashed a stock recovery as well IIRC, I'm pretty sure Odin on these tabs does the whole kit and kaboodle when it flashed

I need help with everything

Hi, I am completely lost on what to do, I have roamed the forums for quite some time, and actually managed to update my phone twice before.
I've just forgotten everything about it, and it's for some reason really hard to find anything that is actually dummy proof explained. If anyone could help me out I would be thankful.

PhilGizzle said:
Hi, I am completely lost on what to do, I have roamed the forums for quite some time, and actually managed to update my phone twice before.
I've just forgotten everything about it, and it's for some reason really hard to find anything that is actually dummy proof explained. If anyone could help me out I would be thankful.
Click to expand...
Click to collapse
Please help me, I am so lost, apparently I am supposed to use Odin and install or flash or whatever the **** a kernel, but I can't. Everwhere I look I find that I need a .tar file. Which doesn't exist in ANY of the things I have downloaded. I am going insane right now, I've had a useless phone for two days now. Please help me.

PhilGizzle said:
Please help me, I am so lost, apparently I am supposed to use Odin and install or flash or whatever the **** a kernel, but I can't. Everwhere I look I find that I need a .tar file. Which doesn't exist in ANY of the things I have downloaded. I am going insane right now, I've had a useless phone for two days now. Please help me.
Click to expand...
Click to collapse
It would be easier to find the zImage of a kernel and installing it using heimdall(semaphore also contains the tar files). Search up semaphore kernel and download the respective version that is compatible with your android version choice. I know there are 's' versions but download the non 's' version for now. There are tar files there so you can flash with odin. but if you want to use heimdall, one of the zips(or tar files) contain the zImage file and extract it into the folder where you have extracted heimdall(well if you don't have heimdall, google it and download it.) If you don't know how to use heimdall, look at tutorials such as from cyanogenmod or on xda forums.
Hope this helps, gsstudios

gsstudios said:
It would be easier to find the zImage of a kernel and installing it using heimdall(semaphore also contains the tar files). Search up semaphore kernel and download the respective version that is compatible with your android version choice. I know there are 's' versions but download the non 's' version for now. There are tar files there so you can flash with odin. but if you want to use heimdall, one of the zips(or tar files) contain the zImage file and extract it into the folder where you have extracted heimdall(well if you don't have heimdall, google it and download it.) If you don't know how to use heimdall, look at tutorials such as from cyanogenmod or on xda forums.
Hope this helps, gsstudios
Click to expand...
Click to collapse
Thanks, this has helped me tons, thanks man.

Issues with UNROOTING SM-N920T Galaxy Note 5 (T-Mobile version)

Hello. I was hesitant to start a new thread, but there are a lot of threads in this section of the forums, and i keep getting an error when trying to use the "Search this forum" bar. Anyway, I have a rooted 6.0.1 Note 5 (DPG1 update) with TWRP 3.0.2-1 and am trying to flash stock rom back to Lollipop. I am using ODIN with the firmware file named thusly "N920TUVU1BOH6_N920TTMB1BOH6_N920TUVU1BOH6_HOME.tar". I first tried flashing with the .md5 extension on the end, but it failed as well as with the .tar extension. I've looked quite a bit on the forums, as well as on the web, and anything i have found say it is as simple as ODIN flashing stock rom through download mode. any suggestions, or tips? am I going about this totally wrong? need more information from me? please let me know, any feedback is appreciated. thank you.
EDIT: I am looking to completely remove root from my device, including restoring stock recovery; trying to sell device. thanks again.

Jenquist82 said:
Hello. I was hesitant to start a new thread, but there are a lot of threads in this section of the forums, and i keep getting an error when trying to use the "Search this forum" bar. Anyway, I have a rooted 6.0.1 Note 5 (DPG1 update) with TWRP 3.0.2-1 and am trying to flash stock rom back to Lollipop. I am using ODIN with the firmware file named thusly "N920TUVU1BOH6_N920TTMB1BOH6_N920TUVU1BOH6_HOME.tar". I first tried flashing with the .md5 extension on the end, but it failed as well as with the .tar extension. I've looked quite a bit on the forums, as well as on the web, and anything i have found say it is as simple as ODIN flashing stock rom through download mode. any suggestions, or tips? am I going about this totally wrong? need more information from me? please let me know, any feedback is appreciated. thank you.
EDIT: I am looking to completely remove root from my device, including restoring stock recovery; trying to sell device. thanks again.
Click to expand...
Click to collapse
What firmware did your device ship with? If it didn't come with BOH6 ( which mine didn't ) I don't believe you can flash it, I could be wrong but only flash with the earliest the phone came with. I can't think of any other reason Odin wouldn't work as I flash back and forth all the time between PD1 I can't think of the last 5.1.1, I've been on 6.0 roms for about a month.

I see. It doesn't necessarily have to be lollipop that I use to flash, that is just what the site recommended, could I use the latest marshmallow? Or does it have to be the version that shipped with the device? Because I do not have that information sadly. Perhaps you could link me to something that is sure to work? As long as I am removing root, I am ok with what I end up with. Thanks again!