Hey guys i really need some help. I tried to install clockworkmod on my T-mobile samsung galaxy s (sgh-t959v) and i guess i bricked it. All that comes out on the screen is a phone and a computer. can someone pls tell me what to do to fix this and install the right way.
Thank you in advance
Fairly new to all this myself and don't have experience with T-Mobile but if you go here you should be able to get a Firmware for your phone: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T959V&r=5#regiona
You should be able to download a stock firmware, odin & everything else you need to flash your stock firmware. From this site.
Perhaps wait and see other responses though as there maybe a way to fix without flashing a stock firmware. Also getting some info from someone with your phone on T-Mobile may be better.
scubadude said:
Fairly new to all this myself and don't have experience with T-Mobile but if you go here you should be able to get a Firmware for your phone: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T959V&r=5#regiona
You should be able to download a stock firmware, odin & everything else you need to flash your stock firmware. From this site.
Perhaps wait and see other responses though as there maybe a way to fix without flashing a stock firmware. Also getting some info from someone with your phone on T-Mobile may be better.
Click to expand...
Click to collapse
Just confirming that what scubadude said above. Flash new firmware, it is a soft-brick and therefore recoverable. Something that needs to be added however is that you will need to make a login in-order to access the direct link. If the link still doesn't work after that then click firmware and follow on from there..
Related
Hi,
I've just got my P7300 repaired by an official Samsung repairer. I have the feeling, though, that they installed a non-stock firmware on the tablet as I cannot update anymore. When trying to update OTA, I get an error message that suggest using Kies. When I use Kies, I get this message:
"Your device does not support upgrading via Kies"
Before sending it out for repair, I was able to update to Android 3.2. Now I'm stuck with 3.1 and the device performance is really poor. Going through Samsung support, at least here in Italy, is hell and takes forever (like two months...).
Therefore, I would like to flash a stock firmware on this device so as to fix the issue myself. I've read the guide in the forum (http://forum.xda-developers.com/showthread.php?t=1406137) but I must say I'm quite lost...
I don't understand where to find stock firmware for the P7300 nor do I understand how to flash it... Is Odin the way to go? What if the flashing doesn't work? Will I be able to revert to the crappy firmware I have now?
Sorry for the long post and thanks for any help.
Alessandro.
alessandrocattelan said:
Hi,
I've just got my P7300 repaired by an official Samsung repairer. I have the feeling, though, that they installed a non-stock firmware on the tablet as I cannot update anymore. When trying to update OTA, I get an error message that suggest using Kies. When I use Kies, I get this message:
"Your device does not support upgrading via Kies"
Before sending it out for repair, I was able to update to Android 3.2. Now I'm stuck with 3.1 and the device performance is really poor. Going through Samsung support, at least here in Italy, is hell and takes forever (like two months...).
Therefore, I would like to flash a stock firmware on this device so as to fix the issue myself. I've read the guide in the forum (http://forum.xda-developers.com/showthread.php?t=1406137) but I must say I'm quite lost...
I don't understand where to find stock firmware for the P7300 nor do I understand how to flash it... Is Odin the way to go? What if the flashing doesn't work? Will I be able to revert to the crappy firmware I have now?
Sorry for the long post and thanks for any help.
Alessandro.
Click to expand...
Click to collapse
Lost? That guide's as clear as day. Are you sure you read it? Make sure you read carefully, because I do address your issue in the guide in a very short and easy to understand way. Also yes, you need to use ODIN. Read the FAQ and then the How-To. You will find the link to download your preferred firmware (which in fact is mentioned twice) and tools.
nirogu325 said:
Lost? That guide's as clear as day.
Click to expand...
Click to collapse
Must be kind of a cloudy day, then. I mean, you've certainly done a great work with the guide and following up with all your replies, but I guess I need to look for more info. Thanks anyway.
Hey guys I'm in a bit of a pickle.
I have a Samsung Galaxy Tab 8.9 WIFI/3G (Model GT-P7300 I think).
I somehow managed to install Overcome ROM on it when I first got it. Now I want to give it to my Dad and I would like to revert everything back to factory default stock and all. I'm not sure what a Kernal is and not sure if I need to revert that too but probably.
How do I best go about this? I am having much difficulty understanding from googling and reading forum posts and I am not familiar with the acronyms and lingo the community uses. Would you be so kind to please explain to me step-by-step detailed as if I was a child lol
Please link me to everything I need to download!
Oh and another thing: I bought this tab in Asia so it has English and other Asian languages installed. Can I install a different language ROM for my Dad? (I think he prefers Swedish). Will it be locked to any providers or anything?
Thank you very much in advance. I really need help with this
Here's the stock unbranded firmware for Nordic countries
Here's the branded firmware for Telia (couldn't find any other carrier branded for Sweden
Then just flash using Odin, that will wipe everything though, but you'll be back to stock
I don't understand how to flash with Odin .. I don't even know what Odin is! Please give me super simple instructions
I downloaded the firmware file and I put it on my tablet's SD card. I rebooted into Recovery mode and I try to apply the update from the ZIP file. But it says it cannot Open it?! What am I doing wrong?
All is explained in this post here, that is stickied at the top of this section
overome is quite a standard rom with features that are not really seen... the look is stock... I don't see a reason to revert back...
Thanks guys, I successfully flashed with Odin and I think it was a success. You have been very helpful.
But I am still not sure if 100% everything is set to default stock in case of a future warranty claim. Is there anything else I should do? Do I need to install stock Recovery as well?
Thanks again.
mikey8080 said:
Thanks guys, I successfully flashed with Odin and I think it was a success. You have been very helpful.
But I am still not sure if 100% everything is set to default stock in case of a future warranty claim. Is there anything else I should do? Do I need to install stock Recovery as well?
Thanks again.
Click to expand...
Click to collapse
If you used Odin and one of the stock firmwares then it should have flashed a stock recovery as well IIRC, I'm pretty sure Odin on these tabs does the whole kit and kaboodle when it flashed
So I had a botched situation caused by me when flashing a custom Rom (Rom/instructions is great, I went off the reservation myself) and had a soft brick.
I had decided at that point to just revert back to stock and not play around until things stabilize with Eng more. However, I couldn't.
The last stock referenced topic is with an outdated firmware and being 950U1 rather than just U. Downloading updated firmwares (or even attempting that one blindly) resulted in "Device dismatch".
I was then basically forced to (and successfully) go to SamPWN but that wasn't my initial intention.
Does anyone have an updated guide on how we can go back to stock without EngBoot, and specifically also states which CSC file is needed?
uaktags said:
So I had a botched situation caused by me when flashing a custom Rom (Rom/instructions is great, I went off the reservation myself) and had a soft brick.
I had decided at that point to just revert back to stock and not play around until things stabilize with Eng more. However, I couldn't.
The last stock referenced topic is with an outdated firmware and being 950U1 rather than just U. Downloading updated firmwares (or even attempting that one blindly) resulted in "Device dismatch".
I was then basically forced to (and successfully) go to SamPWN but that wasn't my initial intention.
Does anyone have an updated guide on how we can go back to stock without EngBoot, and specifically also states which CSC file is needed?
Click to expand...
Click to collapse
I may not have the answer, but check these guys and ask questions there, you should get an answer.
https://forum.xda-developers.com/tm.../guide-how-to-convert-to-100-stock-t-t3615957
And this link if from an unlocked S8 forum, but it has some info that you can find useful.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Charkatak said:
I may not have the answer, but check these guys and ask questions there, you should get an answer.
https://forum.xda-developers.com/tm.../guide-how-to-convert-to-100-stock-t-t3615957
And this link if from an unlocked S8 forum, but it has some info that you can find useful.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Click to expand...
Click to collapse
Download latest firmware for your phone, download Odin. Then flash them.
mweinbach said:
Download latest firmware for your phone, download Odin. Then flash them.
Click to expand...
Click to collapse
As I stated, I've attempted this and it failed. Plus it doesn't explain which file for the CSC had it worked anyhow. Downloading the latest results in the model dismatch. So can't JUST download and flash. But thanks for atleadt trying.
@charkata thanks for the links, I'll check them out and see how that goes.
uaktags said:
As I stated, I've attempted this and it failed. Plus it doesn't explain which file for the CSC had it worked anyhow. Downloading the latest results in the model dismatch. So can't JUST download and flash. But thanks for atleadt trying.
@charkata thanks for the links, I'll check them out and see how that goes.
Click to expand...
Click to collapse
Not the home version. And try using modified Odin.
mweinbach said:
Not the home version. And try using modified Odin.
Click to expand...
Click to collapse
I'll give it a go, going to try to do it in an hour or so and see if it'll work with the PrinceC version.
Is there any chance (in your or anyone elses opinion) that the mismatch could be the result of the custom rom being based on U1 rather than just U?
uaktags said:
I'll give it a go, going to try to do it in an hour or so and see if it'll work with the PrinceC version.
Is there any chance (in your or anyone elses opinion) that the mismatch could be the result of the custom rom being based on U1 rather than just U?
Click to expand...
Click to collapse
No, it can't modify hardware based model number.
uaktags said:
So I had a botched situation caused by me when flashing a custom Rom (Rom/instructions is great, I went off the reservation myself) and had a soft brick.
I had decided at that point to just revert back to stock and not play around until things stabilize with Eng more. However, I couldn't.
The last stock referenced topic is with an outdated firmware and being 950U1 rather than just U. Downloading updated firmwares (or even attempting that one blindly) resulted in "Device dismatch".
I was then basically forced to (and successfully) go to SamPWN but that wasn't my initial intention.
Does anyone have an updated guide on how we can go back to stock without EngBoot, and specifically also states which CSC file is needed?
Click to expand...
Click to collapse
You should be able to just completely reflash the stock TMB firmware with the modded Odin without an issue...am I understanding correctly that this did not work? Download the Prince Comsey modded Odin. It has a .ini file that you need to open w/ a text editor like notepad++, and edit UMS=0 to UMS=1 -this allows you to also flash the userdata file included in the TMB firmware, along w/ the normal BL, AP, CP & CSC.
Make sure you downloaded the correct firmware for the S8 (G950U), not S8+ (G955U).
https://updato.com/firmware-archive-select-model?record=F9F75B5C6CF011E7963AFA163EE8F90B
Did this work? Can anyone confirm? If not, I'm going to try it this weekend and hopefully I'll remember to reply here with results.
Flashed at&t firmware with odin but can't update software past July 1st sec uodate.
Hey guys. I picked a note 9 Verizon unlocked version and was having issues using it on at&t, volte obv not working hd voice calls not working and various other signal issues. I decided to flash to the at&t firmware with odin to fix it. First thing I did was flash the unlocked firmware, factory reset, then flashed at&t firmware. Everything is working just like I bought the at&t note 9 but I'm stuck on July security patch and the update is not recognized. Is there anyway to fix this ? Thanks in advance!
What happens when you try to update; it downloads the update but failing to install due to an error (what's the error) or not finding the updates at all? If latter try with Samsung smart switch install both on the phone and computer
It doesn't find any update ota or on smartswitch. Not sure maybe just need to wait longer, unless someone else has some bright ideas lol
Clo292311 said:
It doesn't find any update ota or on smartswitch. Not sure maybe just need to wait longer, unless someone else has some bright ideas lol
Click to expand...
Click to collapse
What build number are you running? If you managed to get yourself stranded on a build not officially pushed by ATT, then you're stuck until you Odin to something else. Current ATT is ARI5.
I am on ARG6 build. Is there something you know of I can flash that would be better?
@CrazyApe18
Clo292311 said:
I am on ARG6 build. Is there something you know of I can flash that would be better?
Click to expand...
Click to collapse
I'm not sure there is a path using update zips to get you current. I just looked and I can't see a way to get current from there. Somewhere on here an ARI5 Odin image (with no HOME_CSC) has been posted. That would get you to current ATT software. Once there, you would get OTA updates. I'm not sure how you got off the update track.
Edit: Here's the link to the Odin image you'd want: https://drive.google.com/file/d/1bKlJ-2ikGRsOd3JkDIFvjHGJX6XnrtEH/view?usp=sharing - courtesy of @Venom0642
@CrazyApe18 thank you for that link. Do I need to find a HOME_CSC file to add into that to flash it correctly?
Clo292311 said:
@CrazyApe18 thank you for that link. Do I need to find a HOME_CSC file to add into that to flash it correctly?
Click to expand...
Click to collapse
No, you don't need one. However, without HOME_CSC (and there isn't one that I'm aware of), your device will factory reset when you Odin this build. So make a full Smart Switch backup before doing it.
Oh that's fine I full wipe after odin anyways usually. Thanks so much !!
If you don't have an ATnT sim installed, it wont give you updates.
CrazyApe18 said:
I'm not sure there is a path using update zips to get you current. I just looked and I can't see a way to get current from there. Somewhere on here an ARI5 Odin image (with no HOME_CSC) has been posted. That would get you to current ATT software. Once there, you would get OTA updates. I'm not sure how you got off the update track.
Edit: Here's the link to the Odin image you'd want: https://drive.google.com/file/d/1bKlJ-2ikGRsOd3JkDIFvjHGJX6XnrtEH/view?usp=sharing - courtesy of @Venom0642
Click to expand...
Click to collapse
hey @CrazyApe18, i have a note 9 att locked on build number N960USQS2CSGB. I'm having an issue finding a current pie version to flash with odin. Basically I removed a bunch of things with adb a while back and wanted to restore back to factory. I pushed adb uninstall to things like the att update software, if I'm not mistaken a factory reset wouldn't restore this. I'm wanting to flash and then update to the new android version. I was wondering if you could point me in the right direction. I downloaded your link just in case it could help me. I'm familiar with odin, just having a hard time finding the firmware and SAMMOBILE is very slow for non paying users. I appreciate any help you can give me.
just realized that the version in your link is pre Pie. any idea where i can get a fairly recent pie firmware?
not sure where to ask for this but, been looking for stock firmware or whatever i would need to flash in odin to get my phone back in working order. its a600u ive lost track of anything else to identify the phone so if anyone comes across this and can help id appreciate it. and i may need to create my own twrp for my phone in order to get it working again, if anyone could point me in the right direction there.
so for reference, can get to download mode cant get to twrp that i ran in odin which i downloaded from here
https://forum.xda-developers.com/galaxy-a6/development/recovery-twrp-3-2-2-0-galaxy-a6-t3819741
[EDIT] Was able to get twrp running, needed sprint variant not international, now just getting a bootable system.
[EDIT] so as of now, i have twrp installed, but no rom i install will boot. Im just hung at the galaxy a6 powered by android screen. do i just have a paperweight? cause im totally cool with that, just need answers.
So you don't have any ROM installed right now? You can download stock ROM for your phone from Sammobile. Then just flash it with odin. That should work.