Database Develop

SoftBrick, can't return to stock firmware

Hi,
After a SoftBrick, I try to reset my P1000 GSM with overcome stock guide but it fail.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> movinand.mst
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> hidden.rfs
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​
And then my P1000 rebout to "SoftBrick Download Mode"

What do you mean as "SoftBrick"? Technically, no "soft brick" exists, there's just one kind of brick when the bootloader is corrupted (and this isn't your case). Have you tried to use Heimdall?

hi, i can ask you a guide to restore my tab to stock rom? now i have cyanogen
thank you

Softbricked SM-G900A Help me pls.

When i tried to unbrick my phone in odin i get this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Help with S6

ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!

twrp issue

I updated to Marshmallow and after the update I could not install the twrp i got failed
Message
PHP:
<ID:0/010> Odin engine v(ID:3.1101)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Complete(Write) operation [QRCODE]failed[/QRCODE].
<OSM> All threads completed. (succeed 0 / failed 1)

I just found the solution turned out the reactivation lock was the problem. just turn it off
setting> security and turn off 'reactivation lock

Odin Errors

When I try to flash my phone I get errors like
1.
<ID:0/010> Odin engine v(ID:3.1401)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 4659 M
<ID:0/010> SetupConnection..
<ID:0/010> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
2.
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin.lz4
<ID:0/008> NAND Write Start!!
3.
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
4.
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4661 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How to fix it
UPD: i fixed it https://samfw.com/firmware/SM-A600FN/SEK/A600FNXXU9CVE1

And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?

nqnxev said:
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
Click to expand...
Click to collapse
1.Yes
2.No
3.I am trying to flash official android 8 firmware (downgrade)

blvxrd said:
3.I am trying to flash official android 8 firmware (downgrade)
Click to expand...
Click to collapse
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.

nqnxev said:
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
Click to expand...
Click to collapse
thanks, i have already repaired it