Database Develop

[Q] Unlock Bootloader B609 + recovery

Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated

JellyFox said:
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
Click to expand...
Click to collapse
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!

arthios said:
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
Click to expand...
Click to collapse
RootGenius was the first thing i tried. It went up to 66% then i got an error but that was a fully Chinese version.
I just tried it again with the one i found by using Google and it goes up to 72%, then tells me that the root has failed.
Which version did you use?

This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers

ibeqa said:
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
Click to expand...
Click to collapse
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.

JellyFox said:
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.

arthios said:
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
Click to expand...
Click to collapse
I disabled my firewall and antivirus and gave RootGenius another try. Normally it goes up to 71% and gives me the error. Now it went to 71%, rebooted and then it gave me the error. The weird part is that right before i get the error, it says the installation is complete.
Moved on to Vroot (which is called Iroot now apparently) . It took a while longer but it wasn't able to do it either.

JellyFox said:
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.

update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208

Z!L0G80 said:
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Click to expand...
Click to collapse
I still didn't get the OTA for B615 yet but thank you for the recovery.
ibeqa said:
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
Click to expand...
Click to collapse
You were right! (not that i every doubted you). I found the problem i had: For some reason, i couldn't boot in bootloader trough my phone BUT i was able to do it with 'adb reboot bootloader'. After making some idiotic mistakes and having to re-flash the stock ROM, I finally was able to install My-RoM v3.3, its rooted, i have Xposed so i am happy
So thank everyone for the help!

Android 7.0 Call Problem

Hi
I have installed many of the Android 7.0 ROMS for Shamu and all of them have this annoying problem:
When I dial out I cannot hear the ring or the other person.
When I receive a call I don't often hear the other person but they may hear me.
Yes I've installed the N6 boot loader and radio and do not load any other mods, custom kernels.
I just can't figure this out. Any ideas? Is there a Android 7.0 firmware that I need to install to prepare my Shamu for Android 7?
Thanks
Aussie

I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it

Flashing Stock 7.0
aroy97 said:
I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it
Click to expand...
Click to collapse
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie

aussie1234 said:
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie
Click to expand...
Click to collapse
Flashing stock does not relock the bootloader.

Didn't work
Ok I flashed stock 7.0 using Wugfresh's tool.
But still when I use the phone I can't hear who is on the other end.
Really odd!
Anyone have any suggestions?
Thanks
Aussie

I'm having the same issue on a stock Nougat phone as well. The problem appeared a few days ago out of the blue. The only band aid fix I've found is the sound about app and force assigned the mic and earpiece functions.
Sadly, this doesn't address the main issue in the first place.

none
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
USMC retired said:
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
Click to expand...
Click to collapse
If you need anything else you can PM me

I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.

stevew84 said:
I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.
Click to expand...
Click to collapse
have you tried reflashing your radio? Maybe try flashing a MM radio as well

Just wanted to chime in, I think this is actually more of a VoLTE/HD issue. It happens to my N6 that's still on MM. Sometimes the dialtone/ring is there, other times it's not. Would love to know of there's a fix!

Found a fix..
Hello all.
I found a fix to Shamu+Nougat ROM problem when I am called I do not hear the other person and vice versa.
To install Factory Nougat from Google: https://developers.google.com/android/nexus/images
FIRST backup your phone (contacts, files, pics, movies etc) as this will totally erase EVERYTHING!
When you are on the Factory Images for Nexus Devices page click "backed up to your Google Account" then go click 'back' on your browser and click on 'Acknowledge' to see the list of Factory Nougat ROMS for Shamu come up on the right.
Download the Android 7.0 Factory ROM for Shamu/Nexus 6.
Do not flash this stock ROM using Wugfresh's tool. Instead follow precisely the 'Flashing Instructions' on the page https://developers.google.com/android/nexus/images. Allow the phone to reboot and fully set up. Restart the phone again.
Then use Wugfresh to Root the phone and also to install custom recovery (I already have unlocked bootloader).
Now, nothing against Wugfresh Tool (I do not know why the flashing method above works better) as Wugfresh has saved my phone many times.. Its just that Googles recommended flashing instructions worked best.
Now I use the phone and not only do I hear the caller and they hear me I have much better reception (Australia). Yes I did previously flash latest radio but the above method seemed to improve my Shamu 100%.
What I have not done yet is flash a custom ROM in case the problem re-appears. But my phone is rooted and unlocked so I can install other mods that work with Nougat.
Hope this works for you.
Cheers
Aussie

Another Fix Part 2
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie

aussie1234 said:
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie
Click to expand...
Click to collapse
Has there been a listed fix for people who haven't rooted their nexus?

Huawei P9 - Android 6 to 7 Firmware

Hi all,
Ive been a fair while out of flashing ROMs since Note 4 Edge / HTC M7 and have today unlocked bootloader and rooted my P9.
It is currently Australian Vodafone release EVA-L09CC346B160 (Android 6) but I want Nougat.
There is no local carrier updates available but I understand that there is Android 7 available in Australia on 'international' branded handsets.
How can I identify what this firmware is for international Nougat? Can some one assist me. Or can someone advise what would be a suitable equivalent firmware that I can use in place of.
I am unsure how this device goes in flashing ROMs of higher or lower android versions on the current firmware and dont really want to brick it.
Thanks for any tips / suggestions

Umm, just found a thread mentioning L09C636B361 - will check this out, but is there any more recent? And still how does fl;ashing other premade ROMs on 7 go on top of the current Android 6 firmware go?.. Ta

https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
using this guide you can update to the latest nougat release

Thank yuo Xtcislove
I have completed the steps suggested and now have Nougat. Though it is a newer version being .383 which was updated via OTA to .378 and then zip to .383.
Thank you for the help

I'm trying to flash firmware on my P9, now I have EVA-L09C40B181, but it stuck on 5% and HiSuite shows Recovery failed! I tried custom firmware, same problem. What can I do ?

Dfani511 - just follow the instructions in the thread provided by Xtcislove, it works but took me a long time.
I found the steps concerning the update to be added in dload was a little not clear, in the update zip that's downloaded, you need to open it until you get the dload folder, extract that and copy to the SD card.
Throughout my updating, o never ended up on the firmware you have

This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...

twerg said:
This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Click to expand...
Click to collapse
This is what I did to root my Huawei P9 on Nougat L09C432B383:
Use the SuperSU-v.27.9-201612051815EMUI5.0.zip file flash via custom recovery and it should root your device no problem.

twerg said:
This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Click to expand...
Click to collapse
Use this
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258

xtcislove said:
Use this
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
Click to expand...
Click to collapse
Hey xtcislove - is there a preferred version? 1, 2 or 3 do you recommend? Thanks mate
--------------
EDIT - Nevermind, Xtcislove, your the best man, appreciate your help with your guides etc. I went with option 1 and the handset is now rooted on Nougat. Thanks so much

twerg said:
Hey xtcislove - is there a preferred version? 1, 2 or 3 do you recommend? Thanks mate
--------------
EDIT - Nevermind, Xtcislove, your the best man, appreciate your help with your guides etc. I went with option 1 and the handset is now rooted on Nougat. Thanks so much
Click to expand...
Click to collapse
3 is the version i preffer, you cant freeze apps with v1 but most things should work fine.
btw you can flash v3 over v1.

Ive flashed v3 over 1 and all appears good, root working fine. Thanks again.
Though I have noticed on both v1 and v3 that SuperSU binary needs to be updated, ob both v1 and v3. The phone fails to update both, states unsuccessful and to reboot, which also does not update the binary.
Only other thing I have done is to get BusyBox.
What can be done about the failing binary update? Will it be fine to leave as is, just getting rid of the prompt when it appears, or does it really need to have the update done sometime?

[HELP] Huawei P10 - how to revert to stock recovery from TWRP & lock bootloader

So long story short I wanted to get root access in order to install an audio mod for my phone, realized it was basically pain in the ass and most of the time it won't work so I want to revert the changes back to where I started (a.k.a. stock recovery, locked bootloader). Also system update doesn't work with TWRP, it just boots into TWRP and doesn't proceed installing the update. I'd like to fix that.
My phone is VTR-L29C432 B360 Oreo 8.0
I flashed this TWRP -> https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
Phone hasn't been rooted.
I'm sorry if it looks like I made something dumb but I just want some help. I'd appreciate anything really.

Anyone anything? At least I'd like to revert to stock recovery so I can install B365.
On the other side would installing B365 from FF work fine with TWRP?

Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.

BloodBullet said:
Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.
Click to expand...
Click to collapse
With this guide I update B60 A B 365 I hope it helps you
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286

Update OP3 from 3.1.2 to OOS 5.0.1 (process and files required)

Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.

AbhiM7 said:
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
Click to expand...
Click to collapse
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/

hellcat50 said:
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
Click to expand...
Click to collapse
Hi, I've already downloaded this very stable file and tried flashing using TWRP

AbhiM7 said:
Hi, I've already downloaded this very stable file and tried flashing using TWRP
Click to expand...
Click to collapse
I read something about wrong batteries causing this problem. Do you use the original battery?

hellcat50 said:
I read something about wrong batteries causing this problem. Do you use the original battery?
Click to expand...
Click to collapse
I though of running a diagnosis check by dialing *#808# and looked up Charger option, it shows the battery as "itech_3000mah"
is that original?
I had given the phone to repair for water damage to a professional service chain (Not OnePlus, some company here called Yaantra). I've heard from talking to an official repair person of OnePlus that fake batteries are not possible for OnePlus.
The battery works absolutely alright, charges up nicely and I get decent SOT. Can't complain at all.