Hi
I have installed many of the Android 7.0 ROMS for Shamu and all of them have this annoying problem:
When I dial out I cannot hear the ring or the other person.
When I receive a call I don't often hear the other person but they may hear me.
Yes I've installed the N6 boot loader and radio and do not load any other mods, custom kernels.
I just can't figure this out. Any ideas? Is there a Android 7.0 firmware that I need to install to prepare my Shamu for Android 7?
Thanks
Aussie
I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it
Flashing Stock 7.0
aroy97 said:
I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it
Click to expand...
Click to collapse
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie
aussie1234 said:
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie
Click to expand...
Click to collapse
Flashing stock does not relock the bootloader.
Didn't work
Ok I flashed stock 7.0 using Wugfresh's tool.
But still when I use the phone I can't hear who is on the other end.
Really odd!
Anyone have any suggestions?
Thanks
Aussie
I'm having the same issue on a stock Nougat phone as well. The problem appeared a few days ago out of the blue. The only band aid fix I've found is the sound about app and force assigned the mic and earpiece functions.
Sadly, this doesn't address the main issue in the first place.
none
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
USMC retired said:
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
Click to expand...
Click to collapse
If you need anything else you can PM me
I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.
stevew84 said:
I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.
Click to expand...
Click to collapse
have you tried reflashing your radio? Maybe try flashing a MM radio as well
Just wanted to chime in, I think this is actually more of a VoLTE/HD issue. It happens to my N6 that's still on MM. Sometimes the dialtone/ring is there, other times it's not. Would love to know of there's a fix!
Found a fix..
Hello all.
I found a fix to Shamu+Nougat ROM problem when I am called I do not hear the other person and vice versa.
To install Factory Nougat from Google: https://developers.google.com/android/nexus/images
FIRST backup your phone (contacts, files, pics, movies etc) as this will totally erase EVERYTHING!
When you are on the Factory Images for Nexus Devices page click "backed up to your Google Account" then go click 'back' on your browser and click on 'Acknowledge' to see the list of Factory Nougat ROMS for Shamu come up on the right.
Download the Android 7.0 Factory ROM for Shamu/Nexus 6.
Do not flash this stock ROM using Wugfresh's tool. Instead follow precisely the 'Flashing Instructions' on the page https://developers.google.com/android/nexus/images. Allow the phone to reboot and fully set up. Restart the phone again.
Then use Wugfresh to Root the phone and also to install custom recovery (I already have unlocked bootloader).
Now, nothing against Wugfresh Tool (I do not know why the flashing method above works better) as Wugfresh has saved my phone many times.. Its just that Googles recommended flashing instructions worked best.
Now I use the phone and not only do I hear the caller and they hear me I have much better reception (Australia). Yes I did previously flash latest radio but the above method seemed to improve my Shamu 100%.
What I have not done yet is flash a custom ROM in case the problem re-appears. But my phone is rooted and unlocked so I can install other mods that work with Nougat.
Hope this works for you.
Cheers
Aussie
Another Fix Part 2
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie
aussie1234 said:
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie
Click to expand...
Click to collapse
Has there been a listed fix for people who haven't rooted their nexus?
Related
Hi.
I have just flashed the unofficial CM11 rom on the Original Android Development Forum on my TF701T. The install appears to have been successful however the system keeps freezing anwhere from 1 minute to 5 minutes after boot. Before it freezes everything appears to be working as it should. Any ideas what I have done wrong and what I have to do to fix this? Apologies if the same issue has been raised elsewhere.
Many thanks
East
EastPatel said:
Hi.
I have just flashed the unofficial CM11 rom on the Original Android Development Forum on my TF701T. The install appears to have been successful however the system keeps freezing anwhere from 1 minute to 5 minutes after boot. Before it freezes everything appears to be working as it should. Any ideas what I have done wrong and what I have to do to fix this? Apologies if the same issue has been raised elsewhere.
Many thanks
East
Click to expand...
Click to collapse
Are you on the correct bootloader 10.26.1.18 as is required?
EastPatel said:
Hi.
I have just flashed the unofficial CM11 rom on the Original Android Development Forum on my TF701T. The install appears to have been successful however the system keeps freezing anwhere from 1 minute to 5 minutes after boot. Before it freezes everything appears to be working as it should. Any ideas what I have done wrong and what I have to do to fix this? Apologies if the same issue has been raised elsewhere.
Many thanks
East
Click to expand...
Click to collapse
I've not heard of this ocurring (my own tab has been running for a while now; no issues of this sort).
Are you on the latest ROM build (01/29)? Have you flashed the appropriate gapps?
Are you on the latest boot loader?
Any apps installed which could cause issue?
If it happens when plugged in to USB, is isb OK on your PC/Mac?
Have you used titanium backup to restore system level stuff from a non compatible build?
Do this,
Go back to stock (latest release from asus) and observe for an hour or two. Any issues? If not then flash ROM + gapps and wipe. Don't sign in and don't restore apps. Any issues? Then sign in and restore. Any issues? And so on and so forth until.you find the break point.
Thank you for your prompt responses as always and apologies for not replying sooner.
SDbags I am installing CM11 over your own excellent 4.3+ stock rooted v2 ROM which I believe involved updating my boot loader. I am unsure how to confirm the version I am on but booting into recovery shows the following
Android Macallan-user BL released by ww_epad-10.26.1.7-20131108.
Pershoot once the new CM11 was first flashed the TF701 would freeze during the setup steps well before any 3rd party apps could be installed. After a number of attempts I manage to get through set up and the system becomes a lttle more stable but then freezes after a few more minutes. I can conform that the correct gapps has been flashed using the link on the associated thread and no additional apps except the ones included on the ROM have been flashed. The system freezes without being plugged into the PC via USB and as mentioned before I am coming from sdbags stock rooted 4.3 ROM and have not used titanium back up at all.
A couple of additional point
1) I have tried to reflash sdbags ROM again but it now gets stuck on a bootloop.
2) I noticed that my install of CM11 is not able to access either an SD card placed in the dock or MicroSD placed in the tab despite the system recognising when they are inserted or removed on the task bar.
3) Because the system freezes so quickly it tabvery difficult to transfer a new ROM downloaded to my PC over to the TF701 because the moment it freezes the PC can't communicate with the tab.
Apologies if this reply is a little onerous - any help would be greatly appreciated and thank you both again for your prompt response to my.request for help.
Kind regards,
East
Hold down Volume Down and Power and read the bootloader version from the top left.
EastPatel said:
Thank you for your prompt responses as always and apologies for not replying sooner.
SDbags I am installing CM11 over your own excellent 4.3+ stock rooted v2 ROM which I believe involved updating my boot loader. I am unsure how to confirm the version I am on but booting into recovery shows the following
Android Macallan-user BL released by ww_epad-10.26.1.7-20131108.
Click to expand...
Click to collapse
That's the wrong BL to be on. I don't believe sdbags' ROM updates BL. You must do it via Asus's update.
Go back to stock recovery and follow asus's procedure to update yourself to their latest 10.26.1.18 (4.3) build.
Dear SD Bags & Pershoot,
Apologies for not responding to your feedback sooner - Its been a busy week at work.
I will follow your advise and update the bootloader via the ASUS website and try to reinstall the rom again over the weekend or early next week and I will update this thread with the results. Once again apologies for not following the instructions more carefully.
Many thanks & kind regards,
East
Hi felIas.
I have updated the bootloader as I should have done initially which appears to have sent me back to stock unrooted 4.3. Please could you confirm that all I need to do now is install the recovery image and then flash CM11 and GApps? Does the rom file work the same way as SDbags rom where it also roots the phone as part of the installation or do I need to somehow root first?
Having said all this I am considering leaving the system as stock until a work around for sky go on rooted 4.4.2 devices is found!
Many thanks again for your guidance and patience.
East
EastPatel said:
Hi felIas.
I have updated the bootloader as I should have done initially which appears to have sent me back to stock unrooted 4.3. Please could you confirm that all I need to do now is install the recovery image and then flash CM11 and GApps? Does the rom file work the same way as SDbags rom where it also roots the phone as part of the installation or do I need to somehow root first?
Having said all this I am considering leaving the system as stock until a work around for sky go on rooted 4.4.2 devices is found!
Many thanks again for your guidance and patience.
East
Click to expand...
Click to collapse
I have a work around for Sky Go on rooted devices You didn't ask.
PM Please.
Hey there I was wondering if anyone else is experiencing my problem. I updated to CM11 on my TF701 and while the dock and keyboard works some of the keys are dead i.e. Settings button, toggle wifi, toggle bluetooth, screenshot, disable trackpad, and auto brightness. Is there any way to fix this? I have tried editing the qwerty files and installing the asus keyboard apk, but neither worked. The APK did not install and editing the qwerty.kl file quite literally did nothing. Also curious if there is a way to get an external mouse to behave the way it did on JB left click is a standard touch and right click is back?
Jrockstar867 said:
Hey there I was wondering if anyone else is experiencing my problem. I updated to CM11 on my TF701 and while the dock and keyboard works some of the keys are dead i.e. Settings button, toggle wifi, toggle bluetooth, screenshot, disable trackpad, and auto brightness. Is there any way to fix this? I have tried editing the qwerty files and installing the asus keyboard apk, but neither worked. The APK did not install and editing the qwerty.kl file quite literally did nothing. Also curious if there is a way to get an external mouse to behave the way it did on JB left click is a standard touch and right click is back?
Click to expand...
Click to collapse
Kernel needs recompiling with fixes in it - not a huge job but something I have on my todo list - won't be for a while though.
Is there a thread I can subscribe to to get the latest news??
Sent from my Transformer TF701
Xperia Tablet Z 4.4.4 KitKat Rom - Pre-rooted - Includes Recovery
For SGP311 and SGP312 - Wiping is optional​
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **​
Requirements:
Flashtool 0.9.15.0 or higher
Rooted SGP31X (on any other previous Android version) with custom recovery (i.e. XZDualRecovery) installed.
Previous firmwares up to 4.4.2 can be rooted with towelroot.
If your current Rom doesn't have recovery, follow step 10 of this post: http://forum.xda-developers.com/showpost.php?p=53063218&postcount=14 with tablet in USB debugging mode (step 4 of the same post).
This works on locked or unlocked bootloaders and any customization.
This ROM is pre-rooted and comes with recovery. Other than that it is identical to stock rom.
Download links:
SGP311 US_CA_PR https://mega.co.nz/#F!dhMBkRpC!qAsRR7WXJlKwsUwBuv1vig
SGP311 EU1 https://mega.co.nz/#F!p4FzQaqQ!o88OJPX4SyAYOUM3PMb5_A
SGP312 US_CA_PR https://mega.co.nz/#F!El8QnQxC!BlkadNT5FWGF3dLfCbD4mA
Use the link that matches your tablet model. You only need the zip and ftf files. The txt file is just the checksum if you want to verify that your download is error-free.
Instructions:
0- Backup before you start messing with your tablet!
1- Put system.flashable.zip in /sdcard of your tablet.
2- Keep SGP31X_10.5.1.A.0.283_VMo US_CA_PR_NoSystem.ftf on your PC.
3- Disconnect any USB cable that may be attached to your tablet.
4- Reboot to recovery. Preferably to TWRP, but you can make CWM work too.
5- Do not wipe anything.
6- Once in recovery, flash system.flashable.zip.
7- It is important to TURN OFF the tablet after this step.
8- Find and use the Power Off option in the recovery and turn your tablet off. In CWM based PhilZ Touch it is under "Power Options" -> "Power Off". In TWRP it is under "Reboot" -> "Power Off". If you see your tablet rebooting, force it to turn off by pushing the power and volume up keys simultaneously (or however else you can!)
9- Open Flashtool 0.9.15.0 (or higher) and click on the flash icon. Choose flash mode.
10- Navigate to where you have saved SGP31X_10.5.1.A.0.283_VMo US_CA_PR_NoSystem.ftf
11- If you do not want your any of your current data to be wiped uncheck all the items under the "wipe" section. My recommendation however is to wipe.
12- Now flash this ftf with your tablet in flash mode. To put your tablet in flash mode, hold the volume down button when it is off and connect with the USB cable to the PC.
13- Reboot. You are now on rooted 4.4.4.
Credits:
I only put the files together. All the credit should go to XDA's [NUT] and DooMLoRD and many others...
Can I flash this on SGP312?
Kindly request if you could make also a flashable zip with any European rom
FiDra said:
Can I flash this on SGP312?
Click to expand...
Click to collapse
You can and it is not going to break your tablet but there are small differences between the two fimwares. I added a link for SPG312 too.
nick2crete said:
Kindly request if you could make also a flashable zip with any European rom
Click to expand...
Click to collapse
I can try when I have time. PM to me your model and your customization code.
Flashed and works good on SGP312
Thanks!
It worked perfect !
Thank you very much !
I wasn't going to update to 4.4.4 until you offered this solution. Swapping kernels,etc., re-rooting, reinstalling recovery was just more work than it was worth and had the potential to brick the device. Your approach is brilliant! Thank you very much.
However, I am not able to boot into recovery.
Thank you very much for the easy-to-follow instructions.
It worked perfectly on my SGP312. Fully rooted 4.4.4 Kitkat.
Working on 311
najoor said:
OP!!
Click to expand...
Click to collapse
Any chance that you can and will release a 10.5.1.A.0.283 deodex package for 311 / 312 versions / firmwares?
Shanliang- said:
Thank you very much for the easy-to-follow instructions.
It worked perfectly on my SGP312. Fully rooted 4.4.4 Kitkat.
Click to expand...
Click to collapse
How is it performing for you compared to omni rom?
cantenna said:
How is it performing for you compared to omni rom?
Click to expand...
Click to collapse
I wouldn't be able to compare it to Omni as I haven't used it. Actually, I havent used any AOSP 4.4.4 version. But I can say that 4.4.4 stock so far it has worked pretty well.
There's no lag anymore in the options menu.
Battery seems to last as much as it did on 4.4.2, but I'll update this info after some more testing.
Stock launcher feels smoother, although I use Nova Launcher Prime.
I haven't noticed any bugs for now. Perhaps the only thing is a quite short, recurrent distortion in the sound when playing music, but I had that issue in 4.4.2 as well. Haven't found any info on that.
I'll try to report more as I continue using it.
Shanliang- said:
I wouldn't be able to compare it to Omni as I haven't used it. Actually, I havent used any AOSP 4.4.4 version. But I can say that 4.4.4 stock so far it has worked pretty well.
There's no lag anymore in the options menu.
Battery seems to last as much as it did on 4.4.2, but I'll update this info after some more testing.
Stock launcher feels smoother, although I use Nova Launcher Prime.
I haven't noticed any bugs for now. Perhaps the only thing is a quite short, recurrent distortion in the sound when playing music, but I had that issue in 4.4.2 as well. Haven't found any info on that.
I'll try to report more as I continue using it.
Click to expand...
Click to collapse
Tanks man for the feedback. Will you be re-locking the boot loader for the DRM xperia engine, is that possible?
I am really glad that we have this option available to us now
cantenna said:
Tanks man for the feedback. Will you be re-locking the boot loader for the DRM xperia engine, is that possible?
I am really glad that we have this option available to us know
Click to expand...
Click to collapse
yep! it's possble with BackupTA.
I'm surprised to hear there is occasional static sound with a stock ROM from Sony. Can you pleas elaborate as to the problem?
Also, if I follow this tutorial will it automatically relock my boot loader? I'd prefer to keep an unlocked boot loader until I have had opportunity to test drive.
I'm very pleased with my Omnirom ATM. Am curious to try though.
Thanks
Destroyedbeauty said:
Any chance that you can and will release a 10.5.1.A.0.283 deodex package for 311 / 312 versions / firmwares?
Click to expand...
Click to collapse
I've make one for 311/312, you can grab it here :
http://forum.xda-developers.com/xpe...ent/stock-rom-xperia-tablet-z-sgp312-t2876245
Not completely related to the OP, but this is the first time I've upgraded a device that I had encrypted. Following all the steps, my device is now stuck in a bootloop. TWRP is unable to mount the encrypted partition w/ the passphrase I had set.
Anyone else experience this, or better yet have experience with this in general?
tamasrepus said:
Not completely related to the OP, but this is the first time I've upgraded a device that I had encrypted. Following all the steps, my device is now stuck in a bootloop. TWRP is unable to mount the encrypted partition w/ the passphrase I had set.
Anyone else experience this, or better yet have experience with this in general?
Click to expand...
Click to collapse
Sorry, I do not and I have not tried this ROM yet
tamasrepus said:
Not completely related to the OP, but this is the first time I've upgraded a device that I had encrypted. Following all the steps, my device is now stuck in a bootloop. TWRP is unable to mount the encrypted partition w/ the passphrase I had set.
Anyone else experience this, or better yet have experience with this in general?
Click to expand...
Click to collapse
I got my stock 4.4.4 rooted, but unfortunately not with this ROM. Below are my thoughts on what the problem may be.
system.flashable.zip only includes TWRP 2.6.*, which apparently has issues mounting encrypted partitions. These issues are solved in TWRP 2.7; can the OP update system.flashable.zip to include 2.7?
For those who still want to use this ROM, after flashing system.flashable.zip, I'd immediately install dual recovery before rebooting. I've not tested it myself but it's my theory for what will work.
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
JellyFox said:
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
Click to expand...
Click to collapse
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
arthios said:
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
Click to expand...
Click to collapse
RootGenius was the first thing i tried. It went up to 66% then i got an error but that was a fully Chinese version.
I just tried it again with the one i found by using Google and it goes up to 72%, then tells me that the root has failed.
Which version did you use?
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
ibeqa said:
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
Click to expand...
Click to collapse
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
JellyFox said:
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
arthios said:
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
Click to expand...
Click to collapse
I disabled my firewall and antivirus and gave RootGenius another try. Normally it goes up to 71% and gives me the error. Now it went to 71%, rebooted and then it gave me the error. The weird part is that right before i get the error, it says the installation is complete.
Moved on to Vroot (which is called Iroot now apparently) . It took a while longer but it wasn't able to do it either.
JellyFox said:
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Z!L0G80 said:
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Click to expand...
Click to collapse
I still didn't get the OTA for B615 yet but thank you for the recovery.
ibeqa said:
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
Click to expand...
Click to collapse
You were right! (not that i every doubted you). I found the problem i had: For some reason, i couldn't boot in bootloader trough my phone BUT i was able to do it with 'adb reboot bootloader'. After making some idiotic mistakes and having to re-flash the stock ROM, I finally was able to install My-RoM v3.3, its rooted, i have Xposed so i am happy
So thank everyone for the help!
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
AbhiM7 said:
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
Click to expand...
Click to collapse
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
hellcat50 said:
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
Click to expand...
Click to collapse
Hi, I've already downloaded this very stable file and tried flashing using TWRP
AbhiM7 said:
Hi, I've already downloaded this very stable file and tried flashing using TWRP
Click to expand...
Click to collapse
I read something about wrong batteries causing this problem. Do you use the original battery?
hellcat50 said:
I read something about wrong batteries causing this problem. Do you use the original battery?
Click to expand...
Click to collapse
I though of running a diagnosis check by dialing *#808# and looked up Charger option, it shows the battery as "itech_3000mah"
is that original?
I had given the phone to repair for water damage to a professional service chain (Not OnePlus, some company here called Yaantra). I've heard from talking to an official repair person of OnePlus that fake batteries are not possible for OnePlus.
The battery works absolutely alright, charges up nicely and I get decent SOT. Can't complain at all.
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel