Hi i have a problem with my MOTO X 1058. I think i got some viruses did make that. If i turn on the phone normally, just show warnings like: android stop working, etc. dont me allow to click anything.
I unlocked the phone by Fastboot, tried install new firmware but no sucess. Show me some errors on cmd and RDS.
Anyone know how can i delete all and install a new ROM without any problem?
Thx, sorry for my bad english
Related
[Solved] Yesterday I tried to root my phone but after do all the steps that were on the sites, I couldn't turn it on anymore. Everytime I try it makes the bootloader but when it ends, the moto x turns off again. I don't know what happened someone told me that it names hardbrick so, can anyone tell me how to fix it? Or if it's possible.
If you need some information to help me, just ask. [Solved]
If you can get to the bootloader is not bricked.
Look up how to use fastboot to flash the system and boot img.
Go to soltrans' thread and you should be fine
Sent from my victara
fastercon said:
Go to soltrans' thread and you should be fine
Sent from my victara
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x-2014/general/guide-update-xt1095-pure-edition-to-t2937074
Start with step "0".
Due to att for 6.0 moto G does not turn over any way
resulting in a hard brick or better one bricked bootloader
because I can not access it.
Anyway, I install the Qualcomm drivers but when I use the blankflash.bat simply will not
I've tried other methods and also all the blank says only "<waiting for device>"
and I'm currently without mobile phone and hope the fastest possible response, thanks.
First of all. Why you changed your Thea/XT107X's bootloader, if it's fine for running all 5.X/6.X ROMs? A bad OTA is a possibility. Also there is no blankflash for 6.0 AFAIK. Give me more info and I might find a solution.
One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Feel blessed, you don't have to use moto g anymore.
Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..
Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip
There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Slow down...
Give some (as much as possible really) details as to what you've done to end up where you are.
Preferably in a normal non-centered text because what you've done there is hard on the eyes (read: annoying) and almost put me off answering...
Prince_Eugen said:
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Click to expand...
Click to collapse
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
zelendel said:
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
Click to expand...
Click to collapse
ok thaks but what should i do now ?
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Strephon Alkhalikoi said:
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Click to expand...
Click to collapse
wake up found it stuck in bootloader i didnt do anything
i cant flash rom or do any thing
If you have no ROM, cannot enter recovery, and did nothing to bring this state of affairs about, your phone most likely has a dead EMMC storage chip. You can verify this by trying to flash a stock ROM using the fastboot command, but be aware that attempting to use that Lenovorola program you mentioned could have done significant damage to the device, as that program is not intended for this device.
Should we be able to confirm a dead EMMC chip, there's not that many options available. If you are still under manufacturer warranty you can send the device to Lenovorola for repair at no cost. Otherwise, you'd have to pay for the repair. You could instead purchase a replacement, or purchase a device with a broken screen and swap motherboards (and SIM trays).
Can someone explain this
bwtmanagement said:
Can someone explain this
Click to expand...
Click to collapse
I've not experienced this.
Are you rooted / bootloader unlocked?
Do you have any idea what caused it?
Were you able to recover?
If so, what did you have to do?
bwtmanagement said:
Can someone explain this
Click to expand...
Click to collapse
Did you do anything to the bootloader by flashing any files? Did you unlock the bootloader? If the answer is yes then you might have an issue with flashed files.
If no and you have not touched the device then you might have a rare error. If you have a carrier phone with Verizon you might want to try their "repair assistant" which is the same as what is mentioned on the phone screen. It seems to have a repair function. You will have to connect the phone via USB to your computer. Download the assistant from here. https://www.verizonwireless.com/support/knowledge-base-209211/
If you don't have a Verizon moto x4 or you have another carrier then either still give the software a shot or take it to a Motorola service centre.
Can pretty much confirm the same with an old moto z force post on the Lenovo forums. If you have Verizon downloading the software will solve the problem.
I know that I was trying to flash to stock and that was the result, rsd can see the device but when I flash it it says failed to switch to fastboot
Yea bootloader has been unlocked for weeks and started acting up and I was trying to clear it and start over and no I can't get it to flash spar_chunks
Any ideas
Notice you mentioned RSD failing to switch to fastboot... I assume you tried reflashing the GPT/bootloader directly from fastboot?
If you hit volume up/down from the screen you posted, does it go through the other fastboot screens?
No i get the quausb or whatever that is in my comp for deviecs now...and no screen mow and yes the parition was compermised by error on my part