Hello forum !
i have used a couple of hours now trying to find a solution to my problem both here on the site but also on the internets.
i just recently became the happy owner of a Note, but i have been completely unable to connect it to any of my pc's ive had a galaxy i9000 that i didnt have any problems with but with my note it wont work.
under win7 64bit - when i plug the usb cable a "boc opens" in the drop down menu called MTP and when i klick that nothing happens, ive trid the varies ways of removing the sd card unmounting it etc. and debugging and so on but wont work.
it randomly connected once but then it dissapeared from my computer.
under winXP 32bit it just says usb device not recognised, i really wanna root this thing so i can play with the true power of this amazing device.
and on both pc's ive tried with kies and driver packs both together and seperately.
anyone out there that can help me out with this problem ?
cheers
and happy new year
Prosasan
Before connecting it to the PC with the cable, click "connect storage to pc" in the USB settings. After clicking it, then it will ask you to connect to pc. If you connect to pc before clicking it will not connect.
Sent from my GT-N7000 using Tapatalk
Hello i have done that but the same happens ive done it like it says i should i just dont get why my pc wont recognise it , when i press it and then it waits for me to plug it in, i do that the dialogue box shuts and then nothing happens besides windows saying unrecognised device connected
Strange, Mine connect fine just like how marinervijay mentioned. Go to Settings > Wireless> Usb Utilities and press connect first and then insert your USB, then press connect USB. Voila. There should be a window prompting to open in your windows just like when u insert a flashdrive to ur computer.
iknow its supposed to work like that.
the problem is that it doesnt work :/
Okay, have u tried resetting your Note to factory default?
no i havent tried that, because its all new it didnt work since i got it, i never thought that that might help, ill give it a go.
thx
On another, you might have a defective USB given to you by ur retailer. Perhaps you can contact them somehow and ask them to replace your USB?
do you mean the USB cable delivered with the phone ?
Cheers
Yes. Could be a defect. I'd suggest you check with your retailer if it is replaceable if none of what mentioned is working for you.
Hi,
Have you ticked USB debugging? Its under Settings>Apps>Development
Then it should show usb connection in notification tab, tap it and set usb storage as on.
There may be few problems here so I will suggest different solutions, one might work for you
1. Turn off your antivirus and connect, it should work, see after connecting mobile that does it install something near "Bottom clock"?, open "my computer" see if it gives you N7000 (give it a minute). sometimes your computer settings are a problem
2. If no, Install latest Kies on your computer as it downloads Samsung drivers for your phone
3. after connecting 1st time, computer takes some time to recognize your mobile--be patient--
4. if all of above doesnot work, restart computer, connect USB to another (or same) port (turn off antivirus) and see
5. Nothing, try in Setting>Applications>Development>debugging Mode
6. if not, try on another computer
7. still does not connect, change USB cable
8. Still nothing there might be a issue with your device, but I will not conceive that every quickly, trying all above few times should resolve the issue..
7.
Prosasan said:
Hello forum !
i have used a couple of hours now trying to find a solution to my problem both here on the site but also on the internets.
i just recently became the happy owner of a Note, but i have been completely unable to connect it to any of my pc's ive had a galaxy i9000 that i didnt have any problems with but with my note it wont work.
under win7 64bit - when i plug the usb cable a "boc opens" in the drop down menu called MTP and when i klick that nothing happens, ive trid the varies ways of removing the sd card unmounting it etc. and debugging and so on but wont work.
it randomly connected once but then it dissapeared from my computer.
under winXP 32bit it just says usb device not recognised, i really wanna root this thing so i can play with the true power of this amazing device.
and on both pc's ive tried with kies and driver packs both together and seperately.
anyone out there that can help me out with this problem ?
cheers
and happy new year
Prosasan
Click to expand...
Click to collapse
suresh.my said:
Hi,
Have you ticked USB debugging? Its under Settings>Apps>Development
Then it should show usb connection in notification tab, tap it and set usb storage as on.
Click to expand...
Click to collapse
i already tried that ive done all that i could think of
nasgilani said:
There may be few problems here so I will suggest different solutions, one might work for you
1. Turn off your antivirus and connect, it should work, see after connecting mobile that does it install something near "Bottom clock"?, open "my computer" see if it gives you N7000 (give it a minute). sometimes your computer settings are a problem
2. If no, Install latest Kies on your computer as it downloads Samsung drivers for your phone
3. after connecting 1st time, computer takes some time to recognize your mobile--be patient--
4. if all of above doesnot work, restart computer, connect USB to another (or same) port (turn off antivirus) and see
5. Nothing, try in Setting>Applications>Development>debugging Mode
6. if not, try on another computer
7. still does not connect, change USB cable
8. Still nothing there might be a issue with your device, but I will not conceive that every quickly, trying all above few times should resolve the issue..
7.
Click to expand...
Click to collapse
thanks ill try that now.
Cheers and thanks for all the answers and inputs
tried all but the usb cable..
nasgilani said:
There may be few problems here so I will suggest different solutions, one might work for you
1. Turn off your antivirus and connect, it should work, see after connecting mobile that does it install something near "Bottom clock"?, open "my computer" see if it gives you N7000 (give it a minute). sometimes your computer settings are a problem
2. If no, Install latest Kies on your computer as it downloads Samsung drivers for your phone
3. after connecting 1st time, computer takes some time to recognize your mobile--be patient--
4. if all of above doesnot work, restart computer, connect USB to another (or same) port (turn off antivirus) and see
5. Nothing, try in Setting>Applications>Development>debugging Mode
6. if not, try on another computer
7. still does not connect, change USB cable
8. Still nothing there might be a issue with your device, but I will not conceive that every quickly, trying all above few times should resolve the issue..
7.
Click to expand...
Click to collapse
Okey ive tried them all now, more then a few times most of these ive tried already and the antivirus isnt an issue as i dont have any on this pc. i think the problem either lays at the usb cable or the device itself. i will try and get to borrow a cable from a friend or something
Cheers for all the replies and helpfull inputs
Happy new year to everyone ^^
Have you tried connecting note to the pc using wireless?
Kies allows you to connect wirelessly.
good point!
sunnysurya said:
Have you tried connecting note to the pc using wireless?
Kies allows you to connect wirelessly.
Click to expand...
Click to collapse
i havent tried that, but does that work when u need to root it ?
cheers
I got root access
Prosasan said:
i havent tried that, but does that work when u need to root it ?
cheers
Click to expand...
Click to collapse
Hey,
I am able to get USB storage, and I got root access thru the batch files and help provided in this link: http://forum.xda-developers.com/showthread.php?t=1329360
I have Kies installed and this probably helped detect the phone.
Hope this helps..
USb Problem
Hi I've had the same problem.
I have been using the Note quite happily as a Mass USB storage since early December. Plugged it in this morning and I don't get anything. I have also tried the debugging and all the other things listed. Here's what I get:
Usb debugging on - just a sound and a charging indication
Usb debugging off -usb connected Mtp connected on the notification pull down page. When I click on notification it just shuts the window.
I have tried dialling *#7284# and selecting USB PDA which didin't do anything for me but others seem to have had some luck. See this link:
blog.vacs.fr/index.php?post/2010/12/24/How-to-repair-the-USB-not-detected-problem-on-Android-Samsung-phones
I will be rebooting tonight but I don't really want to.
only the Samsung USB wire works
I had this problem today. The Note would never connect the USB or external storage. I searched and found this thread.
I then noticed it was another USB cable (I gave about 1,000 now!). I tried the Samsung one, and it worked first time.
It is annoying, because these cables are normally swappable with any device. It appears Samsung have defined their own standard. The great thing about standards, of course, is that there are some many to choose from!
USB cable was defect - and replaced
Thanks for the help everyone
When I plug my N6 into my computer, nothing happens. I have usb debugging and MTP checked. This started happening recently. I have previously been able to connect my phone and view files. What could have happened?
Windows Update overwriting something? Impossible to guess. Use the Install Drivers button in Wugfresh's Nexus Root Toolkit to walk through the complete setup of your drivers again, and you should be up and running inside 15 minutes.
Or another thought - have you swiped down when USB is plugged in and selected "for file transfer" rather than "for charging only"?
Sometimes I had to uncheck the USB debugging switch to get it to see my phone
Thanks for the suggestions. Got it working again.
Excellent. What did you do?
I had the Sony XAV-AX100 and everything worked great. I just switched to the AX5000 and now AA drops out all the time. It will either freeze up, or it will come up with a warning that there is no connection to USB. I have tried a different usb cable. Same problem. I am using the same phone Galaxy S8 and the same high end USB cable. I uninstalled AA from phone and re downloaded it. Same thing. It is very random. It will boot up AA just fine then go to Pandora play a song or two then drop all connections. If I unplug and wait and plug phone back in it will work for a short time then drop out again.
Anyone have any thoughts on what to try here?
I have talked to Sony chat session not much help here.
Thanks
I talked to Sony a little bit (from what I could understand) They think it is a MSC "Mass Storage Connection" connection with USB. But Android has not had a MSC connection since maybe 2015. So why would this be happening now with this firmware? Anyone have any suggestions on how to get phone to a MSC USB connection instead of MTP? Or the radio to use the standard MTP connection on every Android out there.
I got the AX5000 on Monday and have been fighting the same issue. I have a Samsung Galaxy S7 running Oreo (8.0) and have tried everything from a physical perspective (cables, flash, factory resets) but no luck. When I spoke with Sony today, they tried to tell me that AA was not supported on my car (2012 Jeep Wrangler) which ignores the fact that this is an after-market upgrade. I agree that it's likely an issue with how the head unit communicates with the phone. The only place I have found to change USB settings is under the Developer Options. The available options are Charge this phone, MTP (Media Transfer Protocol), PTP (Picture Transfer Protocol), RNDIS (USB Ethernet), Audio Source, and MIDI. I'll try each of them and resort back on the results.
Yes with talking to Sony they said that the phone USB has to be set to MSC for USB1 to work. Well you would think that they would know that has not been used on android run phone for years. I tried developer mode and setting debugging to on. and even tried different USB configurations in debugging. like Switching it to Audio Source. As soon as plug my phone in it kicks it back to MTP. This is a easy fix for Sony they have the MTP setting on the USB 2 wire. But we will see how long it takes them to do an update on this since they just did one last week. Very frustrating I have the AX5000 on my Harley. So it is not very convenient to mess with it.
Please do post if you find some kind of solution: As I am sure Sony will be awhile.
I had the same result with attempting to switch the USB mode. It switches back when the phone is plugged in. A firmware update may be our only hope.
Well not sure if I found a possible fix. I put my phone in developer mode. Then switched the USB to debugged. and used my original USB cord that came with the S8. For the limited time that I have been able to check it out it has worked. Keep in mind this is on a Motorcycle. So time to work on this is limited. The problem I have is that the original cord is 4' long and I have no where to tuck it in. I have tried several different short cords (amazon) and they all will work for a bit but AA stops randomly.
I still think it is funny When I talked to SONY they said that this radio would not work with my phone USB protocol. But I have talked to several people that say they have no problems with same phone & same radio.
Anyone know where to get a 1' USB cord that would be the same as stock Samsung S8 cord? Yes I check with US cellular. Phone carrier..
Thanks
Does anyone know if Sony has fixed this issue yet? This is really the only deck I want. The 2330 was another I was looking at but the screen is resistive.
Still an issue for me. No firmware update beyond 1.01 and no settings or application conflicts that I've found.
https://ap.community.sony.com/s/que...sing-a-samsung-galaxy-s7-edge?t=1538077755876
connection to AA should automatically set your USB to MIDI.
if it doesn't, try setting MIDI manually before connecting the cable (and double check it after connecting).
Yeah, tried that with my Galaxy S7 and it auto-switches it back.
I have it working using a Pixel 3 XL.
First, enable developer options
Settings > About phone > tap Build number 7 times
Go back to Settings, then System > Advanced > Developer Options > Default USB Configuration > Set to MIDI
I've emailed OnePlus support several times and they do not answer, so I'm hoping someone here can help me.
My old phone (Galaxy S7) worked perfectly with Ford Sync 3, so it's not the car or a Sync3 issue. Both my phone and Sync 3 are fully updated.
With my OnePlus 7T, I cannot get Android Auto to work. The connection drops out (anywhere from 1 second to 1 minute).
On Sync3, you have to use USB tethering. OnePlus cable is being used, and several high quality and short length generic USB cables have been tested with the same issue.
When you plug in the USB cable, it opens Android Auto, but it always drops out. When opening USB preference and selecting anything other than "No Data Transfer", Android Auto drops out.
I've set Bluetooth tethering on and the default USB preferences to "File Transfer" (settings/system/developer options/default USB configuration).
I've done a factory reset with no backup transferred to my phone, and a factory reset on Sync 3. The same issues continue and I cannot use Android Auto for more than a few seconds before it drops out. When it does this, the Sync 3 doesn't show Android Auto options to open, and my phone still has Android Auto running.
The problem is caused by the phone (One Plus 7T) defaulting my USB connection to "No data Transfer" even though I have it defaulted to "File Transfer". If I try to change it back to "File Transfer", it opens Android Auto for a second, and then drops out again, resetting it to "No Data Transfer". I can do this multiple times and every time it reset to "No Data Transfer".
How do I stop this and force it to stay on "File Transfer" so Android Auto can communicate with my phone?
In Developer Settings you can change the default USB mode. On my old car (Audi A4) I didn't have to change that, "Charge Only" was ok. But on my new car (Skoda Octavia) it has to be set (and sometimes the phone also needs to be unlocked to start the connection).
XlAfbk said:
In Developer Settings you can change the default USB mode. On my old car (Audi A4) I didn't have to change that, "Charge Only" was ok. But on my new car (Skoda Octavia) it has to be set (and sometimes the phone also needs to be unlocked to start the connection).
Click to expand...
Click to collapse
Thank you for responding. I have set the default USB to "File Transfer" in the developer settings, and I have connected the phone with the screen locked and unlocked, many times in testing this. It doesn't make any difference. Android Auto opens for a few seconds and then drops out again. When checking the USB settings (from the drop-down menu at the top) it defaults back to "No data Transfer". If I change it to "File Transfer" it opens Android Auto again, and within a few seconds drops out again, resetting the USB preference to "No Data Transfer". If I keep trying it's a continuous loop of the phone resetting to "No Data Transfer" and Android Auto drops out (due to no data being allowed to transfer).
This is so frustrating!
But it's normal to be switched to no once AA is connected. Ny switching it back you're forcing a reconnect, not a connect
Hey guys.
I'm facing the following problem. Whenever a I plug my 12 Pro on the USB (2.0 or 3.0, doesnt matter) on windows 10, I hear the phone connecting, and then disconnecting, the windows file explorer showing the phone storage content pops up, and the closes, the phone disconnects, and connects again, and on and on and on and on.
I have already deleted all my drivers, reinstalled everything, updated windows but nothing worked. Also, have changed all the power options of USB ports. I've tested different ports, different cables, but got nothing. My old Pixel 3XL works perfectly with the same cable and ports.
I'm currently running EU 13.0.30.
*Edit: It happens with any data transfer mode. If I keep the option "no data transfer" on, I can hear the sound of the usb connection, and it charges normally without looping.
Is there any fix for that?
Try to put a USB hub between the PC and the device.
The obvious solution is to keep it on "no data transfer".
You can still use ADB. You can still use AdbSync.exe (in my sig).
That's what I use and I never play with MTP or PTP or UMS.