Hi..
I was trying to upgrade my samsung galaxy s plus (GT-19001) device to Android 4.0.4.
i just installed CWM-based recovery v5.5.0.4 on my device by rebooting and selecting (install zip from sd card).
------using mentioned combination of keys -------
Then i placed the files in my phone's internal SD Card.
files are mentioned below:
1-> cm-9-20121011-ivendor-ariesve-rc5.zip
2-> gapps-ics-20120429-signed.zip
3-> recovery-clockwork-6.0.1.2-ariesve.zip
then install 1 by choosing from internal SD card and then 2nd file.
my device prompted completion success messages but it took very short time.
----------------------------------------------------------------------------------------------------------------------
now what happened after doing this. my device is displaying same booting screen of CWM-based recovery v5.5.0.4 on each re-boot.
i treid many times by unplug the battrey but unfortunately unsuccessfull.
After that i did Wipe data/factory reset and wipe cache partition.
----------------------------------------------------------------------------------------------------------------------
I tried it through window's based utility Odin v4.43 but it could detect my device usb driver even after success of USB driver installation.
it didn't display Added in message box.
now what should i do ?
i already installed samsung Kies but still undetected.
I tried some old version of Odin 3v1.8 , it detected the port and displayed Added but failed to write ROM on my device.
-----------------------------------------------------------------------------------------------------------------------
My desktop machine's OS : windows 8 64 bit enterprise edition.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I am unable to install new ofor revert back my OS because when i Hold Vol Down + Home + Power, This is not putting me in Download Mode instead Ramdump Mode.
I need your guidence to resolve the issue. Thanks in advance.
Please ask for further details if required.
I'm not sure I got exactly what you did.
1) You installed CWM recovery.
2) You rebooted into recovery.
3) You installed the CM ROM zip.
4) You installed the GApps zip.
5) You rebooted.
Am I right ? And now you only get access to the recovery ?
If you're coming from a GingerBread ROM, this is normal. Simply, re-install the ROM again (and the GApps obviously). If it doesn't work, tell us.
support required
Einril said:
I'm not sure I got exactly what you did.
1) You installed CWM recovery.
2) You rebooted into recovery.
3) You installed the CM ROM zip.
4) You installed the GApps zip.
5) You rebooted.
Am I right ? And now you only get access to the recovery ?
If you're coming from a GingerBread ROM, this is normal. Simply, re-install the ROM again (and the GApps obviously). If it doesn't work, tell us.
Click to expand...
Click to collapse
Hi Einril.
I try to summarize in some chunks for better understanding.
=======================================================================================
Hi.
I just started with CWM-based recovery v5.5.0.4 and placed all above mentioned files/packages into the device internal SD card.
That's what i did :
1). Entered into the recovery mode menu by holding down Volume Up + Power and installed CWM-based recovery v5.5.0.4 zip from the selection of Internal SD Card .
2). After reboot, i came up again in Recovery mode using CWM-based recovery v5.5.0.4 application.
3). Now installed cm-9-20121011-ivendor-ariesve-rc5.zip by the navigation of "Install zip from SD".
It took hardly 4 to 5 seconds and displayed a message that it completes . no flash screen or anything came up and reboot.
4). After that installed gapps-ics-20120429-signed.zip by the navigation of "Install zip from SD".
It displayed same complete message but within 5 to 8 seconds i think.
5). I Wipe data/cache/Dalvik cache after above step and then again repeat the process.
After that i did Wipe data/factory reset and wipe cache partition.
Now when i try to start my device then each time it comes into the CWM-based recovery v5.5.0.4' s recovery mode.
Ask further please if anything is unclear, i have tried too many things with it but yet not soft bricked.
I am able to switch into Download mode.
Did you try to re-install the ROM from the recovery ? (flash cm-9-20121011-ivendor-ariesve-rc5.zip again)
new post
Einril said:
Did you try to re-install the ROM from the recovery ? (flash cm-9-20121011-ivendor-ariesve-rc5.zip again)
Click to expand...
Click to collapse
Hi Erinil,
I think i installed but not sure.
Could you elaborate the re-install ROM steps ?
I tried but same recovery display of CWM-based recovery v5.5.0.4, comes again and stay on recovery mode screen.
How my OS will be started?
It might be possible , i am doing something wrong.
Could you enlist the steps?
Ok.
1) Boot into recovery.
2) Wipe data/Factory reset.
3) Wipe cache.
4) Go to Advanced, then wipe Dalvik cache.
5) Go back, go to Mount & Storage, then Format System.
6) Go back, go to Install zip from SD Card => Choose zip from SD Card => cm-9-20121011-ivendor-ariesve-rc5.zip.
7) Do the same thing for the gapps zip.
8) Wipe data/Factory reset again (just to be sure).
9) Reboot.
This, I think, is the cleanest install you can do. Tell me the result.
Einril said:
Ok.
1) Boot into recovery.
2) Wipe data/Factory reset.
3) Wipe cache.
4) Go to Advanced, then wipe Dalvik cache.
5) Go back, go to Mount & Storage, then Format System.
6) Go back, go to Install zip from SD Card => Choose zip from SD Card => cm-9-20121011-ivendor-ariesve-rc5.zip.
7) Do the same thing for the gapps zip.
8) Wipe data/Factory reset again (just to be sure).
9) Reboot.
This, I think, is the cleanest install you can do. Tell me the result.
Click to expand...
Click to collapse
Einril I tried it same as you explained in steps.
It didn't worked nor display any error during this process.
I think my problem is that. when i start my device it automatically entered into the recovery mode of CWM-based recovery v5.5.0.4..
whether i hold Vol+ and Powerbutton or not, it entered into the recovery mode each reboot.
It might be possible that OS has been installed sucessfull but how the OS will be started now?
Hum, that's strange. You say you can access to Download Mode ? Are you able to flash back the Samsung stock ROM ?
Hi Einril,
What does that mean? Means that Reverting to Gingerbread through Desktop Window OS?
I am unable to revert from my One Laptop (i7 3610 & WIndow 8 - 64 bit) but i am able to revert from my OLD laptop (OS is : window 7 32 bit)
Ok, I heard that some people are having issues with USB drivers on Windows 8. But if you can restore Gingerbread with your old computer, this is great.
Can you try to re-install a stock gingerbread firmware, with re-partition enabled, and then to try again the procedure I gave you ? This way, we are sure that your previous attempts have no effects on the result.
Einril, I have installed stock gingerbread firmware on my device and it is working now.
now guide please how to re-partition? Do you mean using CWM recovery ?
Could you simply enlist the thing which i will have to do now on fresh gingerbread OS?
I 'll tell you today night because right now i am not at home.
Well, if your gingerbread frmware is working, you don't need to repartition.
Now, simply re-install ClockworkMod Recovery, and re-do the whole installation process I gave you. By the way, you said you installed ClockworkMod recovery by flashing a zip in recovery. Isn't it supposed to be a .tar.md5 to flash via Odin ?
Yes i installed ClockworkMode Recovery from recovery mode.
I haven't tried with .tar.md5 using Odin4.43.
I 'll try with both throught Clockworkmode and Odin.
In fact i have tried many time 2-3 months ago too through TeamWin Recovery . problem was same.
It didn't start my OS instead displaying its recovery screen and operations.
i tried but all in vain.
Couldn;t be successful.
it just start from CWM recovery mode and so. not switching into the other mode.
*NEED HELP PLS*
1-My phone doesn't keep time/date/language when I reboot
2-The language goes back to French when I reboot
3-All my apps show the stop error when i make any setting change after reboot
4-Any app that I install after reboot will disappear on the next reboot, except the SU app I installed as zip from sdcard in CWM-based recovery window
5-The phone make sound when I connect to pc but doesn't to ask to chose connection mode, so pc doesn't detect it even though I have USB Debug enabled
6-I did the wipe data/factory reset several times but there's no change when i switch ON the phone even though the wipe data/factory reset was successful.
7-The only button combination that works is the one to go to Download Mode (Volume Down + Home + Power )
8-I can only go to Recovery Mode when I try to factory reset in the phone settings. The phone will restart and take me to Recovery Mode
-Odin is unable to detect the phone.
I just think is the internal storage that is corrupted or something but i can't tell for sure. So please i need ur help on how to fix this problem or if there is any app that i can install as zip from sdcard in CWM that can scan or format or fix this problem
Samsung Galaxy Note N7000ZSLO2
Model Number : SHV-E160S
Hi
I followed this link wiki.cyanogenmod.org/w/Install_CM_for_huashan and I wanted to install CM 13 to my C5303.
I downloaded cm-13.0-20160814-NIGHTLY-huashan.zip unpacked boot.img and flashed.
Then I made factory reset and tries to select zip file from sd card but when I select Apply update>choose from sdcard1 then it brings me back to main menu.
Adb sideload returns "no devices error".
What I can do?
I made full factory reset and wipe cache partition so now I cannot start my phone.
Ok. I successfully installed 12.1, but what with this 13.0?
I resolved issue using twrp, but... cwm recovery 13.0 still not working.
This is my son's tablet. Has not been rooted. I'm pretty good with PC's, but have no experience with android. Need some help.
Tablet is stuck in a bootloop. Held power and volume up to access droidboot. Get options reboot droidboot, reboot, recovery, and power off. At bottom of screen:
FASTBOOT INIT.....
E:installer device ignored
FASTBOOT CMD WAITING.....
E:Failed to mount device '/dev/block/sda1' as installer partition using fs_type itiiton using fs_type 'vfat'
E:installer device ignored
E:installer device ignored
E:No valid installer medium found.
Could not open /sys/devices/virtual/backlight
From here I went to recovery. Then get "No command" screen which I bypassed. Android system recovery options show:
Reboot system now
Apply update from ADB
Wipe data/factory reset
Wipe cache partition
I tried both "Wipe cache partition" and "wipe data/factory reset". Cache wipe appeared to complete without problem. Data wipe appeared to complete without problem. However, when I reboot, still stuck in a bootloop.
Where do I go from here? Any help is much appreciated.
Thanks.
Chad
I'm having trouble installing GSI on the Galaxy Tab A8 2021.
1.Dedicated TWRP Recovery in XDA data was released as Odin after bootloader.
2.I entered the TWRP recovery and there was a unable mount twrps error.
3.To solve the problem, I entered the Format Data of the Wipe section of the TWRP Recovery, entered yes, and initialized it. The problem has been solved since then.
4.To install GSI, I went to the Wipe item in TWRP Recovery and tried Swipe to factory Reset, then pressed Advanced Wipe, selected Dalbik/ART Cache,Metadata,Cache,Data,Internal Storage, and tried Swipe to Wipe.
5.Select Fastboot from the Reboot item in TWRP Recovery and enter Fastboot mode.
6.I ran Google Platform-tools_r33.0.3-windows on my computer and typed the command you see in the picture.
7.I ran Fastboot -w after flashing GSI, but I got an error and reboot my Galaxy Tab will boot indefinitely.
*The GSI ROM file used the 9/12 UNOFFICICAL arm64 bgs.img file of Lineage os19.1.
*The firmware version of the Galaxy Tab is the most recent version.
Please check if there is a problem with my installation method.
I'm a person who doesn't know how to use English, so I used a translator. Thank you for your understanding.
In the step #7, instead of run "fastboot -w" try to flash the system file with "fastboot flash system nameofthe.img". After that, reboot in recovery again and format data like you usually do with TWRP, finally try to reboot the system.