Related
So I just bought an Otterbox case for my phone. I love the feel of it but I noticed something very worrying. Directly to the left of the USB port on the phone, there are two plastic grips that overlap. This is causing the phone's screen to separate from the body ever so slightly. Enough for me to notice though. I'm worried this may damage the spring and lock that holds the screen on the slider.
Anybody who owns the same Otterbox case, could you check for me to see if yours does the same? Just close the phone with the case on and look inbetween the phone from the top to the bottom. Then push the phone open ever so slightly so that the two plastic pieces don't overlap. Am I alone here?
I haven't noticed that, but I have noticed that my Otterbox case keeps my power button held down all the time, which has ended up pushing it right in. Now I need to get my power button fixed by Sony Ericsson.
The screen and pad separating was probably not caused by the case. It is caused by the sliding of the control pads over a period of time. I'm sure everyone has the same issue eventually, with or without the case. When I'm typing now... I feel extra texture lol from the screen hitting the pad..
Sent from my XPlay using XDA App.
I have had mine over a month now and dont have any issues what so ever on mine. Love it... great case. I dont have the rubber overlapping, or the power button pressing down issues........ I would send an email to Otterbox and see if they would be willing to send out a replacement if its a defect case. There customer service is super top notch
I emailed them and there is a case on it's way to me as a replacement. And I took the case off to see if it was just the phone itself but it isn't. It's the case, the two plastic grips overlap.
See here:
http://i55.tinypic.com/10r49xw.jpg
Does yours do that?
Thank you for the visual. My case does not have any issues, and the rubber section inquestion does not look how the photo does. I'm glad to hear that they are sending out a replacement. I have nothing but praise for Otterbox. Anyhow keep us updated on the new case.
jgregoryj1 said:
Thank you for the visual. My case does not have any issues, and the rubber section inquestion does not look how the photo does. I'm glad to hear that they are sending out a replacement. I have nothing but praise for Otterbox. Anyhow keep us updated on the new case.
Click to expand...
Click to collapse
Thanks for the feedback. If you don't mind, could you take a picture similar to the one I took and post it here? I would like to see the difference.
Sorry I have not got back sooner. I am at work and dont have access to camera right now. I will take a photo later and upload it when i can.
I just recently received an Otterbox case for my play and I too have that overlap issue. What I did was just cut off the overlapping clip on the left side of the top cover. Case didn't seem worse for it, it's not loose or anything.
What did you use to do that?
El_Colombiano said:
What did you use to do that?
Click to expand...
Click to collapse
A sharp knife. I'm planning on cutting out the silicon covering the left and right triggers next since it's significantly harder to press them with the silicon on.
Haha I already did that to the triggers. SO much better and the phone is still safe.
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Everyone going for thinner bezel and you need bigger... Should not happen it looks better this way
I have large hand and with this thin bezel I do find that I sometimes touch the far edge of the screen inadvertently. So there is an argument for a larger bezel.
kuromusha38 said:
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Click to expand...
Click to collapse
You do realize you can make an icon for notification bar or even create a gesture?
MikeJennni said:
You do realize you can make an icon for notification bar or even create a gesture?
Click to expand...
Click to collapse
Dude, when I'm watching Japanese porn using BSplayer or something, how will your method help?
Simply add a bumper
Zanr Zij said:
Simply add a bumper
Click to expand...
Click to collapse
The bezel was reduced to allow a larger screen without a huge form factor to better fit in your pocket/hand. Some cases don't work great with the fingerprint scanner. It's all about trial and error.
No thanks.
No, don't do that. Society has finally realized the bezel is overrated.
Sent from my SM-N910P using Tapatalk
More bezzle? Sounds like a fail LOL.
Me and im pretty sure most of the market is shooting for smaller and less bezzle.
Look at the LG G3 for example. Such a large screen but the phone itself is small.
Small bezzle is the future. Simple as that. Im also sure thats where manufatureres are headed.
kuromusha38 said:
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Click to expand...
Click to collapse
The problem is your case, not the phone!
Regards,
Dave
Yes indeed, u r probably the only person who would ask for more bezel. Get a different case
I will tell Samsung CEO about your troubles an be sure they make the changes foe you on Note 5.
Sent from my SM-N910W8 using Tapatalk
Make sure to tell Boo-Keun Yoon I don't want any bezel.... the whole phone should be a dsiplay; like the edge but on all sides.
I think what you are after is an edge that doesn't pass/protrude from the screen. But then it won't protect it either.
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.
as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one
Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.
sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
Made one in white so it's easier to see.
Quiets vibration
Ver 2.1.
Newer version available see videos below.
You can check out a video of how it functions here.
kaluna00 said:
You can check out a video of how it functions here.
Click to expand...
Click to collapse
Link to buy?
Steamer2499 said:
Link to buy?
Click to expand...
Click to collapse
Link is in the comments in the you tube video. Thanks! And here is a how to install video.
Link doesn't work for me... Maybe because I'm from the Philippines...
For those of you who purchased the screen protector. Please send me a message if you need a replacement. I'll work on getting it to you as cheap as possible. Thanks.
Hello everybody in an effort to continually improve. I have come up with some design improvements. Some of the items addressed were preventing snagging in pockets, and reducing the webbing thickness by 0.1 mm
Just ordered mine today! Thanks.
Hey everyone. 3.1 revision is out.
Cheers!
I think I have it set up now on ebay to accept international orders. heads up.
Cheers.
How is drop protection?
foehammer1982 said:
How is drop protection?
Click to expand...
Click to collapse
Hard to quantify... I've had reports of it saving the phone from an 8 foot fall onto concrete... The case needed replacing, but the phone was not damaged.
I got this case, i must say tho this really does protect the front screen. I didn't expect that a case is possible for the front screen.
Now, the problem with this case is the material. It's made from hard plastic, if left too long on the phone it unfortunately left a dent mark on the front screen frame.
If another version is made, it should use different, softer material.
t040484 said:
I got this case, i must say tho this really does protect the front screen. I didn't expect that a case is possible for the front screen.
Now, the problem with this case is the material. It's made from hard plastic, if left too long on the phone it unfortunately left a dent mark on the front screen frame.
If another version is made, it should use different, softer material.
Click to expand...
Click to collapse
Hey there. Would you be able to send me a picture of what you are talking about? I've been using this screen protector since December 2020 and have not experienced that problem.
The plastic case should not dent body or front screen of the phone. I would think only an impact would do something like that.
In other news... I am working on the Prototype with a different material.
kaluna00 said:
Hey there. Would you be able to send me a picture of what you are talking about? I've been using this screen protector since December 2020 and have not experienced that problem.
The plastic case should not dent body or front screen of the phone. I would think only an impact would do something like that.
In other news... I am working on the Prototype with a different material.
Click to expand...
Click to collapse
Thanks for the picture. Surprising. Thanks again for sharing.