Related
So I did a major mistake here. I had the liquid rom but it was so glitchy and all that nothin worked. so then i went to my cwm 6.0.2.8 recovery to delete cache and wipe data to flash the new rom but then it turns out the new rom I wanted to flash was incomplete and now my phone is completely blank now. Oh i am unlocked bootloader too. please help me guys! plus i now have a problem that it says (internal sd card) E: cant mount /sdcard/ and also android_secure is gone. I was able to flash a rom within my sdcard but it gets into a bootloop and wont boot up since of the internal sd card error.
wadamean said:
So I did a major mistake here. I had the liquid rom but it was so glitchy and all that nothin worked. so then i went to my cwm 6.0.2.8 recovery to delete cache and wipe data to flash the new rom but then it turns out the new rom I wanted to flash was incomplete and now my phone is completely blank now. Oh i am unlocked bootloader too. please help me guys! plus i now have a problem that it says (internal sd card) E: cant mount /sdcard/ and also android_secure is gone. I was able to flash a rom within my sdcard but it gets into a bootloop and wont boot up since of the internal sd card error.
Click to expand...
Click to collapse
I've been in the situation a couple of times all you need to do is fastboot flash back to stock using skeevydudes tutorial under general or use rsd lite
I will surely try that. I cant use rsd since i have mac though.
help
frog1982 said:
I've been in the situation a couple of times all you need to do is fastboot flash back to stock using skeevydudes tutorial under general or use rsd lite
Click to expand...
Click to collapse
plus can u post the link to the guide and please to which exact stock rom i need for my unlocked bootlaoder. thanks so much.
wadamean said:
plus can u post the link to the guide and please to which exact stock rom i need for my unlocked bootlaoder. thanks so much.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2226527
There is a section for going back to stock jelly bean with links to the different firmwares. I would suggest mexico retail it is the most bug free and has very little bloat. But if you've never read this post by skeevydude I was just read the whole initial post because it is extremely good to know all this information so that way you can fix anything that goes wrong software wise with your phone. If you have a more questions about it just let me know. Also there is a small section on how to regain root after you do this but your unlocked boot loader will not be affected.
frog1982 said:
http://forum.xda-developers.com/showthread.php?t=2226527
There is a section for going back to stock jelly bean with links to the different firmwares. I would suggest mexico retail it is the most bug free and has very little bloat. But if you've never read this post by skeevydude I was just read the whole initial post because it is extremely good to know all this information so that way you can fix anything that goes wrong software wise with your phone. If you have a more questions about it just let me know. Also there is a small section on how to regain root after you do this but your unlocked boot loader will not be affected.
Click to expand...
Click to collapse
For the /data wipe (not necessary for switching ROMs, just /system and factory reset) you need to fastboot to stock. Checked out that link, and I don't believe that is for fastbooting. That's for flashing a stock ROM via CWM, which won't do anything for you. You need to fastboot a real stock ROM (from the android sbf site) to fix this. And I would recommend flashing manually because I haven't used RSD and Myth always gave me problems.
Sent from my MB886 using xda app-developers app
EDIT: Took a sip of coffee, reskimmed that thread and it's the right one. My bad.
can I have step by step instructions? and the exact file i need. thanks a bunch!
wadamean said:
can I have step by step instructions? and the exact file i need. thanks a bunch!
Click to expand...
Click to collapse
Step by step instructions are located in the link.
instructions please
penser said:
For the /data wipe (not necessary for switching ROMs, just /system and factory reset) you need to fastboot to stock. Checked out that link, and I don't believe that is for fastbooting. That's for flashing a stock ROM via CWM, which won't do anything for you. You need to fastboot a real stock ROM (from the android sbf site) to fix this. And I would recommend flashing manually because I haven't used RSD and Myth always gave me problems.
Sent from my MB886 using xda app-developers app
EDIT: Took a sip of coffee, reskimmed that thread and it's the right one. My bad.
Click to expand...
Click to collapse
can I have step by step instructions? and the exact file i need. thanks a bunch!
ohhhh
frog1982 said:
Step by step instructions are located in the link.
Click to expand...
Click to collapse
where exactly? i cant seem to find them. and which file do i need to fastboot to stock?
i have the MX retail one zip file.
wadamean said:
where exactly? i cant seem to find them. and which file do i need to fastboot to stock?
i have the MX retail one zip file.
Click to expand...
Click to collapse
unzip the file, download the snapdragon fastboot file and put it in the same folder as the unzipped Mex retail then run these fastboot commands while the phone is hooked up to the computer and fastboot mode
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot
FAiled
frog1982 said:
unzip the file, download the snapdragon fastboot file and put it in the same folder as the unzipped Mex retail then run these fastboot commands while the phone is hooked up to the computer and fastboot mode
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
Last login: Fri Aug 16 04:43:13 on ttys000
-bash: sdkfolder: No such file or directory
Hector-Garnicas-iMac:~ hectorgarnica$ cd /Users/hectorgarnica/Atrix\ hd/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml
Hector-Garnicas-iMac:MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml hectorgarnica$ ./fastboot devices
-bash: ./fastboot: No such file or directory
Hector-Garnicas-iMac:MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml hectorgarnica$ cd /Users/hectorgarnica/adt-bundle-mac/sdk/tools Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot devices
TA300036RY fastboot
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash boot /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/boot.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.800s]
writing 'boot'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 1.057s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin
unknown partition '/Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin'
error: cannot determine image filename for '/Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin'
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash devtree device_tree.bin
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.047s]
writing 'devtree'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 0.300s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash system /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.865s]
writing 'system'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 3.122s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot -w
erasing 'userdata'...
OKAY [ 2.347s]
formatting 'userdata' partition...
(bootloader) Variable not supported!
Erase successful, but not automatically formatting.
Can't determine partition type.
OKAY [ 0.106s]
erasing 'cache'...
OKAY [ 1.321s]
formatting 'cache' partition...
(bootloader) Variable not supported!
Erase successful, but not automatically formatting.
Can't determine partition type.
OKAY [ 0.105s]
finished. total time: 3.879s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot reboot
rebooting...
finished. total time: 0.006s
Hector-Garnicas-iMac:tools hectorgarnica$
what i kept getting failed. i did all step by step.
wadamean said:
Last login: Fri Aug 16 04:43:13 on ttys000
-bash: sdkfolder: No such file or directory
Hector-Garnicas-iMac:~ hectorgarnica$ cd /Users/hectorgarnica/Atrix\ hd/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml
Hector-Garnicas-iMac:MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml hectorgarnica$ ./fastboot devices
-bash: ./fastboot: No such file or directory
Hector-Garnicas-iMac:MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml hectorgarnica$ cd /Users/hectorgarnica/adt-bundle-mac/sdk/tools Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot devices
TA300036RY fastboot
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash boot /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/boot.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.800s]
writing 'boot'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 1.057s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin
unknown partition '/Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin'
error: cannot determine image filename for '/Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/device_tree.bin'
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash devtree device_tree.bin
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.047s]
writing 'devtree'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 0.300s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot flash system /Users/hectorgarnica/adt-bundle-mac/sdk/tools/MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml/system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.865s]
writing 'system'...
(bootloader) Battery Low!!
FAILED (remote failure)
finished. total time: 3.122s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot -w
erasing 'userdata'...
OKAY [ 2.347s]
formatting 'userdata' partition...
(bootloader) Variable not supported!
Erase successful, but not automatically formatting.
Can't determine partition type.
OKAY [ 0.106s]
erasing 'cache'...
OKAY [ 1.321s]
formatting 'cache' partition...
(bootloader) Variable not supported!
Erase successful, but not automatically formatting.
Can't determine partition type.
OKAY [ 0.105s]
finished. total time: 3.879s
Hector-Garnicas-iMac:tools hectorgarnica$ ./fastboot reboot
rebooting...
finished. total time: 0.006s
Hector-Garnicas-iMac:tools hectorgarnica$
what i kept getting failed. i did all step by step.
Click to expand...
Click to collapse
did you download the snapdragon fastboot file from the link and place it in the folder as the unzipped stock file
frog1982 said:
did you download the snapdragon fastboot file from the link and place it in the folder as the unzipped stock file
Click to expand...
Click to collapse
yes i did
frog1982 said:
did you download the snapdragon fastboot file from the link and place it in the folder as the unzipped stock file
Click to expand...
Click to collapse
unless i have the wrong file. i have had it from a long while ago plus the link doesnt provide it. i loooked.
wadamean said:
unless i have the wrong file. i have had it from a long while ago plus the link doesnt provide it. i loooked.
Click to expand...
Click to collapse
Don't use the stock\SDK fastboot binary for flashing /
system.
An updated fastboot binary for Lin\Win\Mac can be found here on
the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory
in your $PATH -- Ubuntu\Debian users can just add it to ~/bin
(enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere
handy...that's on you to decide.
that is second paragraph in the link and I double checked the link it is active.
when you download it there will be three folders just copy the files from the Mac folder and put them in your Mex retail file then everything should work fine.
let me know how it goes.
PS I keep this file setup on both my Linux and windows so that at anytime I can fix my phone and suggest that everybody who is flashaholic or developer do the same.
frog1982 said:
Don't use the stock\SDK fastboot binary for flashing /
system.
An updated fastboot binary for Lin\Win\Mac can be found here on
the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory
in your $PATH -- Ubuntu\Debian users can just add it to ~/bin
(enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere
handy...that's on you to decide.
that is second paragraph in the link and I double checked the link it is active.
when you download it there will be three folders just copy the files from the Mac folder and put them in your Mex retail file then everything should work fine.
let me know how it goes.
PS I keep this file setup on both my Linux and windows so that at anytime I can fix my phone and suggest that everybody who is flashaholic or developer do the same.
Click to expand...
Click to collapse
ima try it and let you know
frog1982 said:
Don't use the stock\SDK fastboot binary for flashing /
system.
An updated fastboot binary for Lin\Win\Mac can be found here on
the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory
in your $PATH -- Ubuntu\Debian users can just add it to ~/bin
(enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere
handy...that's on you to decide.
that is second paragraph in the link and I double checked the link it is active.
when you download it there will be three folders just copy the files from the Mac folder and put them in your Mex retail file then everything should work fine.
let me know how it goes.
PS I keep this file setup on both my Linux and windows so that at anytime I can fix my phone and suggest that everybody who is flashaholic or developer do the same.
Click to expand...
Click to collapse
i still keep getting the failed (remote failure)
wadamean said:
i still keep getting the failed (remote failure)
Click to expand...
Click to collapse
are you putting your phone into ap fastboot first
also does mac have any kind sudo, superuser or admin mode that you can try it in.
Yes of course I go to ap fastboot mode first prior to hooking it up to my mac and starting the process. And idk about the sudo or superuser but I'm sure there is administrator stuff for the mac
Sent from my Droid using xda app-developers app
wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/showthread.php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
have you considered dual booting into a Linux distro because I think this might be a Mac issue.
frog1982 said:
have you considered dual booting into a Linux distro because I think this might be a Mac issue.
Click to expand...
Click to collapse
of course i havent since this mac isnt precisely mine. i share it with my parents.
frog1982 said:
have you considered dual booting into a Linux distro because I think this might be a Mac issue.
Click to expand...
Click to collapse
I'm running into thissue on linux ,with the latest version of fastboot., do you have any other ideas?
I had this issue before, but I can't remember how I fixed it... Maybe the fastboot.exe wasn't working good. You should try on a Windows computer. Install all the drivers, try with RSD, if it doesn't work, try manually with fastboot. If it doesn't work, maybe try with Myth Tools.
Can you install a custom recovery?
I just had the same issue. Fix was i used Mfastboot.exe instead and it worked
I grabbed motorola fastboot executable from https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images zip. I had to request an image and wait a day, then dig into the zip and find the linux fastboot executable. I was stuck in a bootloop and restoring with this method gives me a batwings logo, Spring logo and a working Photon Q!
[ ~/asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml 1010 ]$ motofastboot flash system system.img
(bootloader) Variable not supported!
target max-download-size: 30MB
Multi-Flash is enabled!
sending 'system' (30720 KB)...
(...I removed the many chunks it printed out here...)
OKAY [ 6.650s]
writing 'system'...
OKAY [ 0.023s]
sending 'system' (299 KB)...
OKAY [ 4.196s]
writing 'system'...
OKAY [ 0.478s]
finished. total time: 124.170s
Click to expand...
Click to collapse
9-27 build
can some please send me the 9-27 build of 12.1 they dont have it on there site anymore and tell me the correct gapps package to download
wassup everyone I have jacked up my atrix hd. I have a Mac with all the adb and fastboot commands working, just that I have tried to go back to stock with root in order to then go back to flashing roms. wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/show....php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
so do I need to use a windows computer to use RSD or Mythtools? Recovery works by the way but i too am having problems with it. I can still flash roms but they stay in a bootloop no matter what. HELP!!!!!! I apreciate it. THANKS!
I'm having the same issues with installing Roms with Recovery. I've been trying both epinter's and skeevy's and I seem to not be getting good flashes no matter what. I had to use the fastboots back to stock at one point. If i do get one to install its really buggy, lots of FC and other issues which make it unusable. I'm pretty sure I've followed all instructions and I'm not sure if there's just something not quite right with this device or what. I guess I'll just make do with a rooted 4.1.1 stock experience for now.
wassup everyone I have jacked up my atrix hd. I have a Mac with all the adb and fastboot commands working, just that I have tried to go back to stock with root in order to then go back to flashing roms. wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/show....php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
so do I need to use a windows computer to use RSD or Mythtools? Recovery works by the way but i too am having problems with it. I can still flash roms but they stay in a bootloop no matter what and adb is still recognized along with fastboot when i enter the recognition command on my ternminal (command prompt for mac). HELP!!!!!! I apreciate it. THANKS!
Get off your mac,
go to a PC
use myth tools.
And you posted in the wrong section.,
tyrone1 said:
Get off your mac,
go to a PC
use myth tools.
And you posted in the wrong section.,
Click to expand...
Click to collapse
I know i did i did so that I everyone can see this thread i need help in troubleshooting since majority of the users go on the android development for Roms and barely on the Q&A
Using rsd lite may work.
Sent from my MB886 using xda app-developers app
which recovery are you using and do you get any errors in it
Your in the wrong forum for trouble shooting.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Your in the wrong forum for trouble shooting.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Yes I am aware of that before I even posted this thread here. See I actually got replies on this one as where on the same post I put on the troubleshoot q&a place I haven't got not none reply whatsoever in the whole day.
Sent from my Droid using xda app-developers app
wadamean said:
Yes I am aware of that before I even posted this thread here. See I actually got replies on this one as where on the same post I put on the troubleshoot q&a place I haven't got not none reply whatsoever in the whole day.
Sent from my Droid using xda app-developers app
Click to expand...
Click to collapse
Get on a PC. Use RSD lite to get yourself back to stock. Look around the forums a little, the answers you seek are probably in here.
... and please post in the correct section... you'll get responses eventually if you are patient.
Sent from my MB886 using Tapatalk 4
maybe because youre in development section
wadamean said:
wassup everyone I have jacked up my atrix hd. I have a Mac with all the adb and fastboot commands working, just that I have tried to go back to stock with root in order to then go back to flashing roms. wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/show....php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
so do I need to use a windows computer to use RSD or Mythtools? Recovery works by the way but i too am having problems with it. I can still flash roms but they stay in a bootloop no matter what and adb is still recognized along with fastboot when i enter the recognition command on my ternminal (command prompt for mac). HELP!!!!!! I apreciate it. THANKS!
Click to expand...
Click to collapse
post this in atrix hd general or q&a development is if youre looking for a rom or if youve created a rom
wadamean said:
Yes I am aware of that before I even posted this thread here. See I actually got replies on this one as where on the same post I put on the troubleshoot q&a place I haven't got not none reply whatsoever in the whole day.
Sent from my Droid using xda app-developers app
Click to expand...
Click to collapse
The whole day as in the 5 hours between posts?
Sent from my PACMAN MATRIX HD MAXX
Does your phone work now?
Sent from my MB886 using Tapatalk 4
Someone make a Rom and name it "Can't flash roms. No one helps me " so we can keep this thread and redeem the OP.
Sent from my MB886 using XDA Premium 4 mobile app
Are you all set now?
1) you need to use a PC for this stuff, don't risk trying it on a Mac. A friend of mine hard bricked his Droid Razr because he tried rooting it from a Mac.
2) I'm not sure why you needed to unlock your bootloader to return to stock? If you weren't stock in the first place your boot loader must have already been unlocked? Unlocking the bootloader is a one time deal. Seeing as your bootloader is unlocked, use a custom recovery (if you don't have a custom recovery, flash one with fastboot. it's easy.) to flash a stock based ROM.
Download Virtualbox and install a virtual XP or win7 on your mac, install moto drivers, download myth tools and download a complete firmware for your device from here sbf.droid-developers.org .... restore using myth tools follow instructions and you´re done :good:
wadamean said:
wassup everyone I have jacked up my atrix hd. I have a Mac with all the adb and fastboot commands working, just that I have tried to go back to stock with root in order to then go back to flashing roms. wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/show....php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
so do I need to use a windows computer to use RSD or Mythtools? Recovery works by the way but i too am having problems with it. I can still flash roms but they stay in a bootloop no matter what and adb is still recognized along with fastboot when i enter the recognition command on my ternminal (command prompt for mac). HELP!!!!!! I apreciate it. THANKS!
Click to expand...
Click to collapse
wadamean said:
wassup everyone I have jacked up my atrix hd. I have a Mac with all the adb and fastboot commands working, just that I have tried to go back to stock with root in order to then go back to flashing roms. wassup everyone so i like soft bricked my atrix HD. i think it is called soft brick. So im unlocked bootloader and i am trying to go back to stock JB through fastboot which i am doing it through AP fastboot too. all the steps in skeeveydude's thread: http://forum.xda-developers.com/show....php?t=2226527 they work except the system.img part. PLUS IM IN SUDO ADMINISTRATOR MODE TOO in Terminal on Mac. this is what i get when i try to flash system.img:
system.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 486529184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 455063712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 423610528 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 392153248 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 360532128 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 329078944 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297834656 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266279072 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 236382368 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 204929184 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173467808 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 142014624 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 111741088 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 81475744 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 50006176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 18520224 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 517990560 is not a multiple of the block size 4096
OKAY [ 2.635s]
writing 'system'...
(bootloader) Unknown chunk type
FAILED (remote failure)
finished. total time: 4.032s
so do I need to use a windows computer to use RSD or Mythtools? Recovery works by the way but i too am having problems with it. I can still flash roms but they stay in a bootloop no matter what and adb is still recognized along with fastboot when i enter the recognition command on my ternminal (command prompt for mac). HELP!!!!!! I apreciate it. THANKS!
Click to expand...
Click to collapse
Theres some code in the xml file you need to delete because otherwise it wont flash
No need for this in Myth Tools, already flashed mine twice with Mex Retail and AT&T 4.1.1, and I didnt delete anything.
Maybe when you flash with RSD it fails, mine just flashed to stock 4.0.4 AT&T, but when I tried to flash 4.1.1 - 4.1.2 it always failed no matter what I deleted on the XML file.
jram0421 said:
Theres some code in the xml file you need to delete because otherwise it wont flash
Click to expand...
Click to collapse
Dont post questions in Development, all question go in Q&A, Thread Moved.
Hi all,
My RAZR i softbricked almost a year ago. I am determined that I will get my holidays pictures from it... please help me do so!
It gets stuck on the intel page when booting normally, I can access fastboot however I think the phone must be locked. In AP fastboot the options are:
Normal Powerup
Recovery
Factory
BP Tools
Switch Console
Power Off
Recovery will ocassionally take me to the sick looking droid.
When trying through RSD Lite I get stuck at 3/10 "boot_signed", and the phone says "preflash validation failed". I think this may be because the fastboot is locked?
When running through this guide: https://forum.xda-developers.com/showthread.php?t=2390573 unbrick.bat can't find libusb0.dll (possibly a windows 10 issue?).
I can't actually remember what version of Android I was running, however I'm pretty sure it was JB.
If anyone can advise as to what I should try next, or whether I can't recover my pictures at all, then please do get in touch.
Greg
GrogSym said:
Hi all,
My RAZR i softbricked almost a year ago. I am determined that I will get my holidays pictures from it... please help me do so!
It gets stuck on the intel page when booting normally, I can access fastboot however I think the phone must be locked. In AP fastboot the options are:
Normal Powerup
Recovery
Factory
BP Tools
Switch Console
Power Off
Recovery will ocassionally take me to the sick looking droid.
When trying through RSD Lite I get stuck at 3/10 "boot_signed", and the phone says "preflash validation failed". I think this may be because the fastboot is locked?
When running through this guide: https://forum.xda-developers.com/showthread.php?t=2390573 unbrick.bat can't find libusb0.dll (possibly a windows 10 issue?).
I can't actually remember what version of Android I was running, however I'm pretty sure it was JB.
If anyone can advise as to what I should try next, or whether I can't recover my pictures at all, then please do get in touch.
Greg
Click to expand...
Click to collapse
First u can try to flash those images manually. The fastboot command then will say a bit more than just that error.
So flash the system and boot image manually.
We can't unlock the bootloader because u will lose all data from the phone.
Hazou said:
First u can try to flash those images manually. The fastboot command then will say a bit more than just that error.
So flash the system and boot image manually.
We can't unlock the bootloader because u will lose all data from the phone.
Click to expand...
Click to collapse
When I try to flash the boot image through fastboot, I get the following:
C:\Users\Greg\Desktop>fastboot boot boot_signed
creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.432s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.626s
Presumably because this is restricted (ie no root)?
When I try the image file I get:
C:\Users\Greg\Desktop>fastboot flash system system_signed
(bootloader) Variable not supported!
target reported max download size of 104857600 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 626995964 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 515375868 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 407782140 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 296858364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 185189116 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 74765052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 8956 is not a multiple of the block size 4096
sending sparse 'system' (90258 KB)...
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
OKAY [ 8.452s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 8.825s
Am I doing something wrong?
GrogSym said:
When I try to flash the boot image through fastboot, I get the following:
C:\Users\Greg\Desktop>fastboot boot boot_signed
creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.432s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.626s
Presumably because this is restricted (ie no root)?
Click to expand...
Click to collapse
Nope, "root" is only a system thingy and is most commonly used in Android when u can access system files while u are on a running system.
In this case the command "boot" is restricted in the bootloader. No way to enable that one for us. U need to use "flash"
GrogSym said:
When I try the image file I get:
C:\Users\Greg\Desktop>fastboot flash system system_signed
(bootloader) Variable not supported!
target reported max download size of 104857600 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 626995964 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 515375868 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 407782140 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 296858364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 185189116 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 74765052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 8956 is not a multiple of the block size 4096
sending sparse 'system' (90258 KB)...
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
OKAY [ 8.452s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 8.825s
Am I doing something wrong?
Click to expand...
Click to collapse
Are u using the "fastboot" executable from the Android sdk? I recommend in this case to use the "mFastboot" executable.
The mfastboot executable in the RSD-Lite package should work just fine.
Just make sure u are using the latest JB (4.1.2) rsd-lite package.
Hazou said:
Nope, "root" is only a system thingy and is most commonly used in Android when u can access system files while u are on a running system.
In this case the command "boot" is restricted in the bootloader. No way to enable that one for us. U need to use "flash"
Are u using the "fastboot" executable from the Android sdk? I recommend in this case to use the "mFastboot" executable.
The mfastboot executable in the RSD-Lite package should work just fine.
Just make sure u are using the latest JB (4.1.2) rsd-lite package.
Click to expand...
Click to collapse
Thank you so much for your continued help - I'm afraid I'm no further ahead. I have tried the following:
C:\Users\Greg\Desktop>mfastboot flash boot boot_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'boot' (11264 KB)...
OKAY [ 1.421s]
writing 'boot'...
FAILED (remote: Preflash validation failed)
finished. total time: 1.799s
C:\Users\Greg\Desktop>mfastboot flash system system_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
Multi-Flash is enabled!
sending 'system' (102400 KB)...
OKAY [ 9.850s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 10.479s
C:\Users\Greg\Desktop>
The phone returns: (...security version downgraded then)
PIV block validation failed
EIV block validation failed for system
Invalid PIV image: system
Fastboot command failed
Does this suggest I am using the wrong image file? CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml
I can't see an alternative for a UK phone on 4.1.2
Maybe I could just fly you to my house and you can fix it for me If there is a tutorial that I should be following that I have missed, then please do let me know.
Many thanks again,
Greg
GrogSym said:
Thank you so much for your continued help - I'm afraid I'm no further ahead. I have tried the following:
C:\Users\Greg\Desktop>mfastboot flash boot boot_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'boot' (11264 KB)...
OKAY [ 1.421s]
writing 'boot'...
FAILED (remote: Preflash validation failed)
finished. total time: 1.799s
C:\Users\Greg\Desktop>mfastboot flash system system_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
Multi-Flash is enabled!
sending 'system' (102400 KB)...
OKAY [ 9.850s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 10.479s
C:\Users\Greg\Desktop>
The phone returns: (...security version downgraded then)
PIV block validation failed
EIV block validation failed for system
Invalid PIV image: system
Fastboot command failed
Does this suggest I am using the wrong image file? CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml
I can't see an alternative for a UK phone on 4.1.2
Maybe I could just fly you to my house and you can fix it for me If there is a tutorial that I should be following that I have missed, then please do let me know.
Many thanks again,
Greg
Click to expand...
Click to collapse
We can't get around that. The error message indicates that the wrong system or other images are flashed into the device. Sry, I have no clue on how to restore that.
Kitkat?
Could it be that failed OTA updates won't allow downgrades?
I have a xt890 that is bootlooping with the very same errors while trying to fastboot flash 4.1.2 en.GB.
I'm coming to the conclusion that the OTA Update partially succeeded and its no longer accepting JB firmware...
Hazou said:
We can't get around that. The error message indicates that the wrong system or other images are flashed into the device. Sry, I have no clue on how to restore that.
Click to expand...
Click to collapse