I can access Flash mode or fastboot. Tried flashing stock 4.3 ftf and use stock dual recovery kernel however I can't get past Sony Logo. There's no colorful waves animation only backlight. Tried flashing stock rom with CWM and I successfully flashed it however then I get yellow triangle, exclamation mark inside and phone and then it restarts.
Yesterday I fixed it but stupid me tried to update system to 4.3 an I bricked it again!
No idea what I can do now this was caused by flashing wrong Kernel. I thought it was for V but it was for SP!
Please share your knowledge with me.
EDIT I managed to flash AOKP fuk ye
How'd you managed to flash AOKP ?
Related
guys a had some really bad time running into this faulty ICS ROM and den by fault bricking it.
then after searching for hours i found this post by forest1971 here http://forum.xda-developers.com/showthread.php?p=26285877for unbricking GNOTE by repatitioning the internal sdcard after finding faulty bricked blocks.
as i could not reboot into recovery.
so i used one of the PIT files provided in his post and flashed it via PC ODIN to revive my bricked GNOTE.
later i was able to get into recovery.
then i thought of flashing STOCK jelly bean DDLSC 4.1.2 ROM and i was able to flash it easily via PC ODIN.
then i phone rebooted and got stuck on samsung jelly bean BOOT screen.
i waited for hours for it to start(pass that boot screen) but all in vain.
SO now i ma stuck at the BOOT screen so can any1 please help me and tell me what to do now??
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
zai89 said:
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
Click to expand...
Click to collapse
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
prince4p91 said:
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
Click to expand...
Click to collapse
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Mayank Chandwani said:
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Click to expand...
Click to collapse
yes i can reboot into download mode.
but the thing is that i have flashed this stock DDLSC ROM and i was able to make it run by rebooting system 3-4 times
but later on it would freeze after like 10-20 seconds and then i have to reboot the system again and
the ROM will start but again freezes within 10-20 seconds of startup.
so please help me to get rid of dese freezes.
PS- ill try flashing this supernexus 2 ROM lets see what happens
I just tried to install pacman rom with CWM on my xperia z, it seemed to get stuck on install so i powered off, now its appearing to boot loop and showing the sony logo and nothing else.
Any ideas while i get googling?!
If you can still get into CWM, flash another rom. Else use flashtool an an original ftf
I cant get into CWM but can connect in fastboot and flash mode with flashtool.
Can i flash a custom rom this way?
You can flash stock roms & kernels, you'll have to reroot etc again but your phone will work again
There's plenty of unbranded software's for both 6603/2 in the development sections.
I use this one http://forum.xda-developers.com/showthread.php?t=2202685
Stock rom installed thank you!
Hey guys please help! I was running Paranoid Android custom rom and installed xposed framework and Android-L navigation bar module, it asked me to rename build.prop with a code and after that whn i rebooted the phone after the sony logo nothing appeared i tried and rebooted several times but the same issue. So i booted into CWM and restored the ,205 backup that i had, after that rebooted and the device is stuck on Sony Logo, Can't even boot into CWM recovery. PLEASE HELP!
Flash an FTF file using flashtool...
Yeah you can install stock firmware with flashtool .
Thanks guys i flashed the stock ftf via flashtool and it solved the problem!
Hello everyone,
I'd appreciate some help here.
I've been using my xperia tx on 4.3 JB for quite a while now but it consumed my battery like hell. So I flashed it back to 4.1.2 JB stock fw.
Now here's the problem, as i'd like to flash to carbon rom and to do so I need to boot into cwm recovery. I've downloaded CWM 9i_JB by davidmarco or something like that and it installed successfully. My phone is rooted and it has unlocked bootloader. I tried several times to boot into cwm with restarting my phone then when Sony logo appears I was consistently pressing volume down button and nothing happened, my phone booted normally. I've also downloaded Rom Manager to try and boot into cwm but that didn't work also. I don't really know where the problem is and i'd appreciate some help.
Thanks in advance,
Sandi
edit:
I've flashed another kernel with cwm integrated in it so everything works fine now.
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
chauhanjayc said:
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
Click to expand...
Click to collapse
First of all: read the forum rules. After 1400 posts you should know that the GENERAL section is not the right place to ask questions like this.
Second: Wich file system are you using? If it's any other but ext4 you should format the storage using twrp.
Did you flash with Androxyde's flashtool, or just with Emma?
Hey ! i too experienced the same issue earlier today.. Only the latest build isnt working when flashed ..I flashed the kitkat build via flashtool and it worked.. is there any solution.. ? ive been trying since morning.. And another thing is that recovery also cant be flashed . So im literally stuck at this phase. :crying:
just flash a stock rom from flashtool i always encounter that when i corrupt flashing thru recovery.. like i fully wipe and forgot to put rom in internal lol
Flashed with both Emma and flashetool
Even tried custom lp rom via twrp but the same situation
Have you fixed your issue? I have the same case. I flashed it to stock ROM but the black screen is still occurring after xperia logo.
1. make sure your partition is ext4
2. download proper official Kitkat 4.4.4 firmware (.tft), flash it with Androxyde's flashtool (make sure the .ftf is not corrupted, driver is installed, good usb cable and 75% of battery or above).
3. if you wanna check the device is in good shape, try to boot up (in my case, I'll flash LP 5.1.1 right after flashing KK firmware is done).
4. if the device is boot up correctly, turn off your device and begin to flash LP 5.1.1 firmware
NOTE: somewhere on this forum say about the right version of flashtool to flash the firmware to our device, older version of flashtool. But I'm using version 0.9.22.3 and everything is fine. However, I can see that the flashtool is not using the newest engine while flashing my device (C6603) but using the older engine instead.
Hi,
I have already been in such a situation.
1) Try to flash (with flashtool) official 4.2 Android firmware, boot, then flash latest one (5.1.1)
2) Try to flash official firmware (4.2) with xflasher (https://forum.xda-developers.com/showpost.php?p=74122327&postcount=212, https://forum.xda-developers.com/showpost.php?p=74122295&postcount=2)
Good luck!
still having same issue with my z3, flashing with emma and tft but stuck on sony logo
I also met this problem yesterday.
I use the latest Flashtool and flash the latest firmware but it said The bundle does not match the connected device.
Then I use a older version like 0.9.18 to flash the latest firmware. The problem you said occurred. It stuck in black screen after Sony logo.
Here is how I fix it:
1. Use an older version of Flashtool to flash an older firmware such as 4.4.4_10.5.1.A.0.283 like me.
2. After flashing the old firmware it should be normally powered on. Then power off and enter the flash mode again. And flash the latest firmware, problem fixed.
Hope that my experience can offer a bit help for you.